[u-boot.git] / include / configs / m28evk.h

/*
 * Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
 * on behalf of DENX Software Engineering GmbH
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */
#ifndef __CONFIGS_M28EVK_H__
#define __CONFIGS_M28EVK_H__

/* System configurations */
#define CONFIG_MX28				/* i.MX28 SoC */
#define CONFIG_MACH_TYPE	MACH_TYPE_M28EVK

#define CONFIG_TIMESTAMP		/* Print image info with timestamp */

/* U-Boot Commands */
#define CONFIG_FAT_WRITE

#define CONFIG_CMD_DATE
#define CONFIG_CMD_EEPROM
#define CONFIG_CMD_NAND
#define CONFIG_CMD_NAND_TRIMFFS

/* Memory configuration */
#define CONFIG_NR_DRAM_BANKS		1		/* 1 bank of DRAM */
#define PHYS_SDRAM_1			0x40000000	/* Base address */
#define PHYS_SDRAM_1_SIZE		0x20000000	/* Max 512 MB RAM */
#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1

/* Environment */
#define CONFIG_ENV_SIZE			(16 * 1024)
#define CONFIG_ENV_IS_IN_NAND

/* Environment is in NAND */
#if defined(CONFIG_CMD_NAND) && defined(CONFIG_ENV_IS_IN_NAND)
#define CONFIG_ENV_SIZE_REDUND		CONFIG_ENV_SIZE
#define CONFIG_ENV_SECT_SIZE		(128 * 1024)
#define CONFIG_ENV_RANGE		(4 * CONFIG_ENV_SECT_SIZE)
#define CONFIG_ENV_OFFSET		(24 * CONFIG_ENV_SECT_SIZE) /* 3 MiB */
#define CONFIG_ENV_OFFSET_REDUND	\
		(CONFIG_ENV_OFFSET + CONFIG_ENV_RANGE)

#define CONFIG_CMD_UBIFS
#define CONFIG_CMD_MTDPARTS
#define CONFIG_RBTREE
#define CONFIG_LZO
#define CONFIG_MTD_DEVICE
#define CONFIG_MTD_PARTITIONS
#define MTDIDS_DEFAULT			"nand0=gpmi-nand"
#define MTDPARTS_DEFAULT			\
	"mtdparts=gpmi-nand:"			\
		"3m(u-boot),"			\
		"512k(env1),"			\
		"512k(env2),"			\
		"14m(boot),"			\
		"238m(data),"			\
		"-@4096k(UBI)"
#else
#define CONFIG_ENV_IS_NOWHERE
#endif

/* FEC Ethernet on SoC */
#ifdef CONFIG_CMD_NET
#define CONFIG_FEC_MXC
#endif

/* EEPROM */
#ifdef CONFIG_CMD_EEPROM
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN	2
#endif

/* RTC */
#ifdef CONFIG_CMD_DATE
/* Use the internal RTC in the MXS chip */
#define CONFIG_RTC_INTERNAL
#ifdef CONFIG_RTC_INTERNAL
#define CONFIG_RTC_MXS
#else
#define CONFIG_RTC_M41T62
#define CONFIG_SYS_I2C_RTC_ADDR		0x68
#define CONFIG_SYS_M41T11_BASE_YEAR	2000
#endif
#endif

/* USB */
#ifdef CONFIG_CMD_USB
#define CONFIG_EHCI_MXS_PORT0
#define CONFIG_EHCI_MXS_PORT1
#define CONFIG_USB_MAX_CONTROLLER_COUNT	2
#endif

/* SPI */
#ifdef CONFIG_CMD_SPI
#define CONFIG_DEFAULT_SPI_BUS		2
#define CONFIG_DEFAULT_SPI_CS		0
#define CONFIG_DEFAULT_SPI_MODE		SPI_MODE_0

/* SPI FLASH */
#ifdef CONFIG_CMD_SF
#define CONFIG_SF_DEFAULT_BUS		2
#define CONFIG_SF_DEFAULT_CS		0
#define CONFIG_SF_DEFAULT_SPEED		40000000
#define CONFIG_SF_DEFAULT_MODE		SPI_MODE_0

#define CONFIG_ENV_SPI_BUS		2
#define CONFIG_ENV_SPI_CS		0
#define CONFIG_ENV_SPI_MAX_HZ		40000000
#define CONFIG_ENV_SPI_MODE		SPI_MODE_0
#endif

#endif

/* LCD */
#ifdef CONFIG_VIDEO
#define	CONFIG_VIDEO_LOGO
#define	CONFIG_SPLASH_SCREEN
#define	CONFIG_BMP_16BPP
#define	CONFIG_VIDEO_BMP_RLE8
#define	CONFIG_VIDEO_BMP_GZIP
#define	CONFIG_SYS_VIDEO_LOGO_MAX_SIZE	(2 << 20)
#endif

/* Booting Linux */
#define CONFIG_BOOTFILE		"fitImage"
#define CONFIG_BOOTARGS		"console=ttyAMA0,115200n8 "
#define CONFIG_BOOTCOMMAND	"run mmc_mmc"
#define CONFIG_LOADADDR		0x42000000
#define CONFIG_SYS_LOAD_ADDR	CONFIG_LOADADDR

/* Extra Environment */
#define CONFIG_PREBOOT		"run try_bootscript"
#define CONFIG_HOSTNAME		m28evk

#define CONFIG_EXTRA_ENV_SETTINGS					\
	"consdev=ttyAMA0\0"						\
	"baudrate=115200\0"						\
	"bootscript=boot.scr\0"						\
	"bootdev=/dev/mmcblk0p2\0"					\
	"rootdev=/dev/mmcblk0p3\0"					\
	"netdev=eth0\0"							\
	"hostname=m28evk\0"						\
	"rootpath=/opt/eldk-5.5/armv5te/rootfs-qte-sdk\0"		\
	"kernel_addr_r=0x42000000\0"					\
	"videomode=video=ctfb:x:800,y:480,depth:18,mode:0,pclk:30066,"	\
		"le:0,ri:256,up:0,lo:45,hs:1,vs:1,sync:100663296,"	\
		"vmode:0\0"						\
	"update_nand_full_filename=u-boot.nand\0"			\
	"update_nand_firmware_filename=u-boot.sb\0"			\
	"update_sd_firmware_filename=u-boot.sd\0"			\
	"update_nand_firmware_maxsz=0x100000\0"				\
	"update_nand_stride=0x40\0"	/* MX28 datasheet ch. 12.12 */	\
	"update_nand_count=0x4\0"	/* MX28 datasheet ch. 12.12 */	\
	"update_nand_get_fcb_size="	/* Get size of FCB blocks */	\
		"nand device 0 ; "					\
		"nand info ; "						\
		"setexpr fcb_sz ${update_nand_stride} * ${update_nand_count};" \
		"setexpr update_nand_fcb ${fcb_sz} * ${nand_writesize}\0" \
	"update_nand_full="		/* Update FCB, DBBT and FW */	\
		"if tftp ${update_nand_full_filename} ; then "		\
		"run update_nand_get_fcb_size ; "			\
		"nand scrub -y 0x0 ${filesize} ; "			\
		"nand write.raw ${loadaddr} 0x0 ${fcb_sz} ; "		\
		"setexpr update_off ${loadaddr} + ${update_nand_fcb} ; " \
		"setexpr update_sz ${filesize} - ${update_nand_fcb} ; " \
		"nand write ${update_off} ${update_nand_fcb} ${update_sz} ; " \
		"fi\0"							\
	"update_nand_firmware="		/* Update only firmware */	\
		"if tftp ${update_nand_firmware_filename} ; then "	\
		"run update_nand_get_fcb_size ; "			\
		"setexpr fcb_sz ${update_nand_fcb} * 2 ; " /* FCB + DBBT */ \
		"setexpr fw_sz ${update_nand_firmware_maxsz} * 2 ; "	\
		"setexpr fw_off ${fcb_sz} + ${update_nand_firmware_maxsz};" \
		"nand erase ${fcb_sz} ${fw_sz} ; "			\
		"nand write ${loadaddr} ${fcb_sz} ${filesize} ; "	\
		"nand write ${loadaddr} ${fw_off} ${filesize} ; "	\
		"fi\0"							\
	"update_sd_firmware="		/* Update the SD firmware partition */ \
		"if mmc rescan ; then "					\
		"if tftp ${update_sd_firmware_filename} ; then "	\
		"setexpr fw_sz ${filesize} / 0x200 ; "	/* SD block size */ \
		"setexpr fw_sz ${fw_sz} + 1 ; "				\
		"mmc write ${loadaddr} 0x800 ${fw_sz} ; "		\
		"fi ; "							\
		"fi\0"							\
	"addcons="							\
		"setenv bootargs ${bootargs} "				\
		"console=${consdev},${baudrate}\0"			\
	"addip="							\
		"setenv bootargs ${bootargs} "				\
		"ip=${ipaddr}:${serverip}:${gatewayip}:"		\
			"${netmask}:${hostname}:${netdev}:off\0"	\
	"addmisc="							\
		"setenv bootargs ${bootargs} ${miscargs}\0"		\
	"adddfltmtd="							\
		"if test \"x${mtdparts}\" == \"x\" ; then "		\
			"mtdparts default ; "				\
		"fi\0"							\
	"addmtd="							\
		"run adddfltmtd ; "					\
		"setenv bootargs ${bootargs} ${mtdparts}\0"		\
	"addargs=run addcons addmtd addmisc\0"				\
	"mmcload="							\
		"mmc rescan ; "						\
		"load mmc 0:2 ${kernel_addr_r} ${bootfile}\0"		\
	"ubiload="							\
		"ubi part UBI ; ubifsmount ubi0:rootfs ; "		\
		"ubifsload ${kernel_addr_r} /boot/${bootfile}\0"	\
	"netload="							\
		"tftp ${kernel_addr_r} ${hostname}/${bootfile}\0"	\
	"miscargs=nohlt panic=1\0"					\
	"mmcargs=setenv bootargs root=${rootdev} rw rootwait\0"		\
	"ubiargs="							\
		"setenv bootargs ubi.mtd=5 "				\
		"root=ubi0:rootfs rootfstype=ubifs\0"			\
	"nfsargs="							\
		"setenv bootargs root=/dev/nfs rw "			\
			"nfsroot=${serverip}:${rootpath},v3,tcp\0"	\
	"mmc_mmc="							\
		"run mmcload mmcargs addargs ; "			\
		"bootm ${kernel_addr_r}\0"				\
	"mmc_ubi="							\
		"run mmcload ubiargs addargs ; "			\
		"bootm ${kernel_addr_r}\0"				\
	"mmc_nfs="							\
		"run mmcload nfsargs addip addargs ; "			\
		"bootm ${kernel_addr_r}\0"				\
	"ubi_mmc="							\
		"run ubiload mmcargs addargs ; "			\
		"bootm ${kernel_addr_r}\0"				\
	"ubi_ubi="							\
		"run ubiload ubiargs addargs ; "			\
		"bootm ${kernel_addr_r}\0"				\
	"ubi_nfs="							\
		"run ubiload nfsargs addip addargs ; "			\
		"bootm ${kernel_addr_r}\0"				\
	"net_mmc="							\
		"run netload mmcargs addargs ; "			\
		"bootm ${kernel_addr_r}\0"				\
	"net_ubi="							\
		"run netload ubiargs addargs ; "			\
		"bootm ${kernel_addr_r}\0"				\
	"net_nfs="							\
		"run netload nfsargs addip addargs ; "			\
		"bootm ${kernel_addr_r}\0"				\
	"try_bootscript="						\
		"mmc rescan;"						\
		"if test -e mmc 0:2 ${bootscript} ; then "		\
		"if load mmc 0:2 ${kernel_addr_r} ${bootscript};"	\
		"then ; "						\
			"echo Running bootscript... ; "			\
			"source ${kernel_addr_r} ; "			\
		"fi ; "							\
		"fi\0"

/* The rest of the configuration is shared */
#include <configs/mxs.h>

#endif /* __CONFIGS_M28EVK_H__ */
Commit	Line	Data
fc102728 MV	1	/*
	2	* Copyright (C) 2011 Marek Vasut <marek.vasut@gmail.com>
	3	* on behalf of DENX Software Engineering GmbH
	4	*
3765b3e7	5	* SPDX-License-Identifier: GPL-2.0+
fc102728	6	*/
5434caf5 MV	7	#ifndef __CONFIGS_M28EVK_H__
5434caf5 MV	8	#define __CONFIGS_M28EVK_H__
fc102728	9
5434caf5 MV	10	/* System configurations */
5434caf5 MV	11	#define CONFIG_MX28 /* i.MX28 SoC */
5f71bca7	12	#define CONFIG_MACH_TYPE MACH_TYPE_M28EVK
fc102728	13
31b57a52 MV	14	#define CONFIG_TIMESTAMP /* Print image info with timestamp */
31b57a52 MV	15
5434caf5	16	/* U-Boot Commands */
31b57a52	17	#define CONFIG_FAT_WRITE
fc102728	18
5f71bca7	19	#define CONFIG_CMD_DATE
5f71bca7	20	#define CONFIG_CMD_EEPROM
5f71bca7	21	#define CONFIG_CMD_NAND
32cc24d3	22	#define CONFIG_CMD_NAND_TRIMFFS
fc102728	23
5434caf5	24	/* Memory configuration */
5f71bca7 WD	25	#define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */
	26	#define PHYS_SDRAM_1 0x40000000 /* Base address */
	27	#define PHYS_SDRAM_1_SIZE 0x20000000 /* Max 512 MB RAM */
5f71bca7	28	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
fc102728	29
5434caf5	30	/* Environment */
5f71bca7	31	#define CONFIG_ENV_SIZE (16 * 1024)
5434caf5	32	#define CONFIG_ENV_IS_IN_NAND
fc102728 MV	33
fc102728 MV	34	/* Environment is in NAND */
5434caf5	35	#if defined(CONFIG_CMD_NAND) && defined(CONFIG_ENV_IS_IN_NAND)
5f71bca7 WD	36	#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
5f71bca7 WD	37	#define CONFIG_ENV_SECT_SIZE (128 * 1024)
76582f9d MV	38	#define CONFIG_ENV_RANGE (4 * CONFIG_ENV_SECT_SIZE)
76582f9d MV	39	#define CONFIG_ENV_OFFSET (24 * CONFIG_ENV_SECT_SIZE) /* 3 MiB */
5f71bca7	40	#define CONFIG_ENV_OFFSET_REDUND \
fc102728 MV	41	(CONFIG_ENV_OFFSET + CONFIG_ENV_RANGE)
fc102728 MV	42
5f71bca7 WD	43	#define CONFIG_CMD_UBIFS
	44	#define CONFIG_CMD_MTDPARTS
	45	#define CONFIG_RBTREE
	46	#define CONFIG_LZO
	47	#define CONFIG_MTD_DEVICE
	48	#define CONFIG_MTD_PARTITIONS
	49	#define MTDIDS_DEFAULT "nand0=gpmi-nand"
	50	#define MTDPARTS_DEFAULT \
c16ecb09	51	"mtdparts=gpmi-nand:" \
76582f9d MV	52	"3m(u-boot)," \
	53	"512k(env1)," \
	54	"512k(env2)," \
	55	"14m(boot)," \
	56	"238m(data)," \
	57	"-@4096k(UBI)"
c660a541	58	#else
5f71bca7	59	#define CONFIG_ENV_IS_NOWHERE
fc102728 MV	60	#endif
fc102728 MV	61
5434caf5 MV	62	/* FEC Ethernet on SoC */
5434caf5 MV	63	#ifdef CONFIG_CMD_NET
5f71bca7	64	#define CONFIG_FEC_MXC
fc102728 MV	65	#endif
fc102728 MV	66
5434caf5 MV	67	/* EEPROM */
5434caf5 MV	68	#ifdef CONFIG_CMD_EEPROM
5f71bca7	69	#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
fc102728 MV	70	#endif
fc102728 MV	71
5434caf5 MV	72	/* RTC */
5434caf5 MV	73	#ifdef CONFIG_CMD_DATE
fc102728	74	/* Use the internal RTC in the MXS chip */
5f71bca7	75	#define CONFIG_RTC_INTERNAL
5434caf5	76	#ifdef CONFIG_RTC_INTERNAL
5f71bca7	77	#define CONFIG_RTC_MXS
fc102728	78	#else
5f71bca7 WD	79	#define CONFIG_RTC_M41T62
	80	#define CONFIG_SYS_I2C_RTC_ADDR 0x68
	81	#define CONFIG_SYS_M41T11_BASE_YEAR 2000
fc102728 MV	82	#endif
	83	#endif
	84
5434caf5 MV	85	/* USB */
5434caf5 MV	86	#ifdef CONFIG_CMD_USB
afa87210 MV	87	#define CONFIG_EHCI_MXS_PORT0
	88	#define CONFIG_EHCI_MXS_PORT1
	89	#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
8f59bc1f MV	90	#endif
8f59bc1f MV	91
5434caf5 MV	92	/* SPI */
5434caf5 MV	93	#ifdef CONFIG_CMD_SPI
5f71bca7 WD	94	#define CONFIG_DEFAULT_SPI_BUS 2
	95	#define CONFIG_DEFAULT_SPI_CS 0
	96	#define CONFIG_DEFAULT_SPI_MODE SPI_MODE_0
fc102728 MV	97
fc102728 MV	98	/* SPI FLASH */
5434caf5	99	#ifdef CONFIG_CMD_SF
5f71bca7 WD	100	#define CONFIG_SF_DEFAULT_BUS 2
	101	#define CONFIG_SF_DEFAULT_CS 0
	102	#define CONFIG_SF_DEFAULT_SPEED 40000000
	103	#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
fc102728	104
5f71bca7 WD	105	#define CONFIG_ENV_SPI_BUS 2
	106	#define CONFIG_ENV_SPI_CS 0
	107	#define CONFIG_ENV_SPI_MAX_HZ 40000000
	108	#define CONFIG_ENV_SPI_MODE SPI_MODE_0
fc102728	109	#endif
5434caf5	110
fc102728 MV	111	#endif
fc102728 MV	112
5434caf5 MV	113	/* LCD */
5434caf5 MV	114	#ifdef CONFIG_VIDEO
d782c1fe	115	#define CONFIG_VIDEO_LOGO
d782c1fe	116	#define CONFIG_SPLASH_SCREEN
d782c1fe MV	117	#define CONFIG_BMP_16BPP
	118	#define CONFIG_VIDEO_BMP_RLE8
	119	#define CONFIG_VIDEO_BMP_GZIP
31b57a52	120	#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (2 << 20)
d782c1fe MV	121	#endif
d782c1fe MV	122
5434caf5	123	/* Booting Linux */
a428ac91	124	#define CONFIG_BOOTFILE "fitImage"
5f71bca7	125	#define CONFIG_BOOTARGS "console=ttyAMA0,115200n8 "
a428ac91	126	#define CONFIG_BOOTCOMMAND "run mmc_mmc"
5f71bca7 WD	127	#define CONFIG_LOADADDR 0x42000000
5f71bca7 WD	128	#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
fc102728	129
5434caf5	130	/* Extra Environment */
a428ac91 LR	131	#define CONFIG_PREBOOT "run try_bootscript"
	132	#define CONFIG_HOSTNAME m28evk
	133
5f71bca7	134	#define CONFIG_EXTRA_ENV_SETTINGS \
a428ac91 LR	135	"consdev=ttyAMA0\0" \
a428ac91 LR	136	"baudrate=115200\0" \
d12159b6	137	"bootscript=boot.scr\0" \
a428ac91 LR	138	"bootdev=/dev/mmcblk0p2\0" \
	139	"rootdev=/dev/mmcblk0p3\0" \
	140	"netdev=eth0\0" \
	141	"hostname=m28evk\0" \
	142	"rootpath=/opt/eldk-5.5/armv5te/rootfs-qte-sdk\0" \
	143	"kernel_addr_r=0x42000000\0" \
	144	"videomode=video=ctfb:x:800,y:480,depth:18,mode:0,pclk:30066," \
	145	"le:0,ri:256,up:0,lo:45,hs:1,vs:1,sync:100663296," \
	146	"vmode:0\0" \
fc102728 MV	147	"update_nand_full_filename=u-boot.nand\0" \
fc102728 MV	148	"update_nand_firmware_filename=u-boot.sb\0" \
9a0f98d3	149	"update_sd_firmware_filename=u-boot.sd\0" \
fc102728 MV	150	"update_nand_firmware_maxsz=0x100000\0" \
	151	"update_nand_stride=0x40\0" /* MX28 datasheet ch. 12.12 */ \
	152	"update_nand_count=0x4\0" /* MX28 datasheet ch. 12.12 */ \
	153	"update_nand_get_fcb_size=" /* Get size of FCB blocks */ \
	154	"nand device 0 ; " \
	155	"nand info ; " \
	156	"setexpr fcb_sz ${update_nand_stride} * ${update_nand_count};" \
	157	"setexpr update_nand_fcb ${fcb_sz} * ${nand_writesize}\0" \
	158	"update_nand_full=" /* Update FCB, DBBT and FW */ \
	159	"if tftp ${update_nand_full_filename} ; then " \
	160	"run update_nand_get_fcb_size ; " \
	161	"nand scrub -y 0x0 ${filesize} ; " \
a428ac91	162	"nand write.raw ${loadaddr} 0x0 ${fcb_sz} ; " \
fc102728 MV	163	"setexpr update_off ${loadaddr} + ${update_nand_fcb} ; " \
	164	"setexpr update_sz ${filesize} - ${update_nand_fcb} ; " \
	165	"nand write ${update_off} ${update_nand_fcb} ${update_sz} ; " \
	166	"fi\0" \
	167	"update_nand_firmware=" /* Update only firmware */ \
	168	"if tftp ${update_nand_firmware_filename} ; then " \
	169	"run update_nand_get_fcb_size ; " \
	170	"setexpr fcb_sz ${update_nand_fcb} * 2 ; " /* FCB + DBBT */ \
	171	"setexpr fw_sz ${update_nand_firmware_maxsz} * 2 ; " \
	172	"setexpr fw_off ${fcb_sz} + ${update_nand_firmware_maxsz};" \
	173	"nand erase ${fcb_sz} ${fw_sz} ; " \
	174	"nand write ${loadaddr} ${fcb_sz} ${filesize} ; " \
	175	"nand write ${loadaddr} ${fw_off} ${filesize} ; " \
9a0f98d3 MV	176	"fi\0" \
	177	"update_sd_firmware=" /* Update the SD firmware partition */ \
	178	"if mmc rescan ; then " \
	179	"if tftp ${update_sd_firmware_filename} ; then " \
	180	"setexpr fw_sz ${filesize} / 0x200 ; " /* SD block size */ \
	181	"setexpr fw_sz ${fw_sz} + 1 ; " \
	182	"mmc write ${loadaddr} 0x800 ${fw_sz} ; " \
	183	"fi ; " \
a428ac91 LR	184	"fi\0" \
	185	"addcons=" \
	186	"setenv bootargs ${bootargs} " \
	187	"console=${consdev},${baudrate}\0" \
	188	"addip=" \
	189	"setenv bootargs ${bootargs} " \
	190	"ip=${ipaddr}:${serverip}:${gatewayip}:" \
	191	"${netmask}:${hostname}:${netdev}:off\0" \
	192	"addmisc=" \
	193	"setenv bootargs ${bootargs} ${miscargs}\0" \
	194	"adddfltmtd=" \
	195	"if test \"x${mtdparts}\" == \"x\" ; then " \
	196	"mtdparts default ; " \
	197	"fi\0" \
	198	"addmtd=" \
	199	"run adddfltmtd ; " \
	200	"setenv bootargs ${bootargs} ${mtdparts}\0" \
	201	"addargs=run addcons addmtd addmisc\0" \
	202	"mmcload=" \
	203	"mmc rescan ; " \
fc532a92	204	"load mmc 0:2 ${kernel_addr_r} ${bootfile}\0" \
a428ac91 LR	205	"ubiload=" \
	206	"ubi part UBI ; ubifsmount ubi0:rootfs ; " \
	207	"ubifsload ${kernel_addr_r} /boot/${bootfile}\0" \
	208	"netload=" \
	209	"tftp ${kernel_addr_r} ${hostname}/${bootfile}\0" \
	210	"miscargs=nohlt panic=1\0" \
	211	"mmcargs=setenv bootargs root=${rootdev} rw rootwait\0" \
	212	"ubiargs=" \
	213	"setenv bootargs ubi.mtd=5 " \
	214	"root=ubi0:rootfs rootfstype=ubifs\0" \
	215	"nfsargs=" \
	216	"setenv bootargs root=/dev/nfs rw " \
	217	"nfsroot=${serverip}:${rootpath},v3,tcp\0" \
	218	"mmc_mmc=" \
	219	"run mmcload mmcargs addargs ; " \
	220	"bootm ${kernel_addr_r}\0" \
	221	"mmc_ubi=" \
	222	"run mmcload ubiargs addargs ; " \
	223	"bootm ${kernel_addr_r}\0" \
	224	"mmc_nfs=" \
	225	"run mmcload nfsargs addip addargs ; " \
	226	"bootm ${kernel_addr_r}\0" \
	227	"ubi_mmc=" \
	228	"run ubiload mmcargs addargs ; " \
	229	"bootm ${kernel_addr_r}\0" \
	230	"ubi_ubi=" \
	231	"run ubiload ubiargs addargs ; " \
	232	"bootm ${kernel_addr_r}\0" \
	233	"ubi_nfs=" \
	234	"run ubiload nfsargs addip addargs ; " \
	235	"bootm ${kernel_addr_r}\0" \
	236	"net_mmc=" \
	237	"run netload mmcargs addargs ; " \
	238	"bootm ${kernel_addr_r}\0" \
	239	"net_ubi=" \
	240	"run netload ubiargs addargs ; " \
	241	"bootm ${kernel_addr_r}\0" \
	242	"net_nfs=" \
	243	"run netload nfsargs addip addargs ; " \
	244	"bootm ${kernel_addr_r}\0" \
	245	"try_bootscript=" \
	246	"mmc rescan;" \
4ba9b1c2	247	"if test -e mmc 0:2 ${bootscript} ; then " \
fc532a92	248	"if load mmc 0:2 ${kernel_addr_r} ${bootscript};" \
46f8a4b7 MV	249	"then ; " \
	250	"echo Running bootscript... ; " \
	251	"source ${kernel_addr_r} ; " \
4ba9b1c2	252	"fi ; " \
fc102728 MV	253	"fi\0"
fc102728 MV	254
5434caf5 MV	255	/* The rest of the configuration is shared */
	256	#include <configs/mxs.h>
	257
	258	#endif /* __CONFIGS_M28EVK_H__ */