[thirdparty/u-boot.git] / include / configs / mvebu_armada-8k.h

/* SPDX-License-Identifier: GPL-2.0+ */
/*
 * Copyright (C) 2016 Stefan Roese <sr@denx.de>
 */

#ifndef _CONFIG_MVEBU_ARMADA_8K_H
#define _CONFIG_MVEBU_ARMADA_8K_H

/*
 * High Level Configuration Options (easy to change)
 */
#define CONFIG_SYS_TCLK		250000000	/* 250MHz */

/* additions for new ARM relocation support */
#define CONFIG_SYS_SDRAM_BASE	0x00000000

/* auto boot */

#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, \
					  115200, 230400, 460800, 921600 }

/*
 * For booting Linux, the board info and command line data
 * have to be in the first 8 MB of memory, since this is
 * the maximum mapped by the Linux kernel during initialization.
 */
#define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs  */
#define CONFIG_INITRD_TAG		/* enable INITRD tag */
#define CONFIG_SETUP_MEMORY_TAGS	/* enable memory tag */

#define	CONFIG_SYS_CBSIZE	1024	/* Console I/O Buff Size */

/*
 * Size of malloc() pool
 */
#define CONFIG_SYS_MALLOC_LEN	(4 << 20) /* 4MiB for malloc() */

/*
 * Other required minimal configurations
 */
#define CONFIG_SYS_LOAD_ADDR	0x00800000	/* default load adr- 8M */
#define CONFIG_SYS_RESET_ADDRESS 0xffff0000	/* Rst Vector Adr */
#define CONFIG_SYS_MAXARGS	32	/* max number of command args */

/* End of 16M scrubbed by training in bootrom */
#define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_TEXT_BASE + 0xFF0000)

/* When runtime detection fails this is the default */
#define CONFIG_SYS_MMC_ENV_DEV		0

#define CONFIG_SYS_MAX_NAND_DEVICE	1
#define CONFIG_SYS_NAND_MAX_CHIPS	1
#define CONFIG_SYS_NAND_ONFI_DETECTION

/*
 * Ethernet Driver configuration
 */
#define CONFIG_ENV_OVERWRITE	/* ethaddr can be reprogrammed */
#define CONFIG_ARP_TIMEOUT	200
#define CONFIG_NET_RETRY_COUNT	50

#define CONFIG_USB_MAX_CONTROLLER_COUNT (3 + 3)

/* USB ethernet */

/*
 * SATA/SCSI/AHCI configuration
 */
#define CONFIG_SCSI_AHCI_PLAT
#define CONFIG_LBA48
#define CONFIG_SYS_64BIT_LBA

#define CONFIG_SYS_SCSI_MAX_SCSI_ID	2
#define CONFIG_SYS_SCSI_MAX_LUN		1
#define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
					 CONFIG_SYS_SCSI_MAX_LUN)

/*
 * PCI configuration
 */
#ifdef CONFIG_PCIE_DW_MVEBU
#define CONFIG_E1000
#endif

#define BOOT_TARGET_DEVICES(func) \
	func(MMC, mmc, 1) \
	func(MMC, mmc, 0) \
	func(USB, usb, 0) \
	func(SCSI, scsi, 0) \
	func(PXE, pxe, na) \
	func(DHCP, dhcp, na)

#include <config_distro_bootcmd.h>

#define CONFIG_EXTRA_ENV_SETTINGS	\
	"scriptaddr=0x4d00000\0"	\
	"pxefile_addr_r=0x4e00000\0"	\
	"fdt_addr_r=0x4f00000\0"	\
	"kernel_addr_r=0x5000000\0"	\
	"ramdisk_addr_r=0x8000000\0"	\
	"fdtfile=marvell/" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \
	BOOTENV

#endif /* _CONFIG_MVEBU_ARMADA_8K_H */
Commit	Line	Data
83d290c5	1	/* SPDX-License-Identifier: GPL-2.0+ */
6f8c2d49 SR	2	/*
6f8c2d49 SR	3	* Copyright (C) 2016 Stefan Roese <sr@denx.de>
6f8c2d49 SR	4	*/
6f8c2d49 SR	5
633fa0e7 SR	6	#ifndef _CONFIG_MVEBU_ARMADA_8K_H
633fa0e7 SR	7	#define _CONFIG_MVEBU_ARMADA_8K_H
6f8c2d49 SR	8
	9	/*
	10	* High Level Configuration Options (easy to change)
	11	*/
	12	#define CONFIG_SYS_TCLK 250000000 /* 250MHz */
	13
6f8c2d49 SR	14	/* additions for new ARM relocation support */
	15	#define CONFIG_SYS_SDRAM_BASE 0x00000000
	16
6f8c2d49	17	/* auto boot */
6f8c2d49	18
6f8c2d49 SR	19	#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, \
	20	115200, 230400, 460800, 921600 }
	21
	22	/*
	23	* For booting Linux, the board info and command line data
	24	* have to be in the first 8 MB of memory, since this is
	25	* the maximum mapped by the Linux kernel during initialization.
	26	*/
	27	#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
	28	#define CONFIG_INITRD_TAG /* enable INITRD tag */
	29	#define CONFIG_SETUP_MEMORY_TAGS /* enable memory tag */
	30
	31	#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buff Size */
6f8c2d49 SR	32
	33	/*
	34	* Size of malloc() pool
	35	*/
	36	#define CONFIG_SYS_MALLOC_LEN (4 << 20) /* 4MiB for malloc() */
	37
	38	/*
	39	* Other required minimal configurations
	40	*/
6f8c2d49	41	#define CONFIG_SYS_LOAD_ADDR 0x00800000 /* default load adr- 8M */
6f8c2d49 SR	42	#define CONFIG_SYS_RESET_ADDRESS 0xffff0000 /* Rst Vector Adr */
	43	#define CONFIG_SYS_MAXARGS 32 /* max number of command args */
	44
6f8c2d49 SR	45	/* End of 16M scrubbed by training in bootrom */
	46	#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE + 0xFF0000)
	47
7e1d3220 BS	48	/* When runtime detection fails this is the default */
	49	#define CONFIG_SYS_MMC_ENV_DEV 0
	50
f59472e8 KP	51	#define CONFIG_SYS_MAX_NAND_DEVICE 1
	52	#define CONFIG_SYS_NAND_MAX_CHIPS 1
	53	#define CONFIG_SYS_NAND_ONFI_DETECTION
f59472e8	54
def84429 SR	55	/*
	56	* Ethernet Driver configuration
	57	*/
	58	#define CONFIG_ENV_OVERWRITE /* ethaddr can be reprogrammed */
def84429 SR	59	#define CONFIG_ARP_TIMEOUT 200
	60	#define CONFIG_NET_RETRY_COUNT 50
	61
cbb89ed0	62	#define CONFIG_USB_MAX_CONTROLLER_COUNT (3 + 3)
6f8c2d49 SR	63
6f8c2d49 SR	64	/* USB ethernet */
6f8c2d49 SR	65
	66	/*
	67	* SATA/SCSI/AHCI configuration
	68	*/
6f8c2d49	69	#define CONFIG_SCSI_AHCI_PLAT
6f8c2d49 SR	70	#define CONFIG_LBA48
	71	#define CONFIG_SYS_64BIT_LBA
	72
	73	#define CONFIG_SYS_SCSI_MAX_SCSI_ID 2
	74	#define CONFIG_SYS_SCSI_MAX_LUN 1
	75	#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
	76	CONFIG_SYS_SCSI_MAX_LUN)
	77
1ec5aa63 SR	78	/*
	79	* PCI configuration
	80	*/
	81	#ifdef CONFIG_PCIE_DW_MVEBU
	82	#define CONFIG_E1000
1ec5aa63 SR	83	#endif
1ec5aa63 SR	84
bdca661e MK	85	#define BOOT_TARGET_DEVICES(func) \
	86	func(MMC, mmc, 1) \
	87	func(MMC, mmc, 0) \
	88	func(USB, usb, 0) \
	89	func(SCSI, scsi, 0) \
	90	func(PXE, pxe, na) \
	91	func(DHCP, dhcp, na)
	92
	93	#include <config_distro_bootcmd.h>
	94
	95	#define CONFIG_EXTRA_ENV_SETTINGS \
	96	"scriptaddr=0x4d00000\0" \
	97	"pxefile_addr_r=0x4e00000\0" \
	98	"fdt_addr_r=0x4f00000\0" \
	99	"kernel_addr_r=0x5000000\0" \
	100	"ramdisk_addr_r=0x8000000\0" \
	101	"fdtfile=marvell/" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \
	102	BOOTENV
	103
633fa0e7	104	#endif /* _CONFIG_MVEBU_ARMADA_8K_H */