]> git.ipfire.org Git - thirdparty/u-boot.git/blame - include/configs/mx6cuboxi.h
Convert CONFIG_SYS_CONSOLE_IS_IN_ENV and CONFIG_CONSOLE_MUX to Kconfig
[thirdparty/u-boot.git] / include / configs / mx6cuboxi.h
CommitLineData
b8ce6fe2
FE
1/*
2 * Copyright (C) 2015 Freescale Semiconductor, Inc.
3 *
4 * Configuration settings for the SolidRun mx6 based boards
5 *
6 * SPDX-License-Identifier: GPL-2.0+
7 */
8#ifndef __MX6CUBOXI_CONFIG_H
9#define __MX6CUBOXI_CONFIG_H
10
3d99e862 11#include <config_distro_defaults.h>
b8ce6fe2
FE
12#include "mx6_common.h"
13
b8ce6fe2
FE
14#include "imx6_spl.h"
15
1368f993 16#define CONFIG_IMX_THERMAL
b8ce6fe2 17
f68a9c6b 18#define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M)
b8ce6fe2 19#define CONFIG_BOARD_EARLY_INIT_F
205d5869 20#define CONFIG_BOARD_LATE_INIT
b8ce6fe2 21#define CONFIG_MXC_UART
b8ce6fe2
FE
22
23/* MMC Configs */
b8ce6fe2 24#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC2_BASE_ADDR
b8ce6fe2
FE
25
26/* Ethernet Configuration */
27#define CONFIG_FEC_MXC
b8ce6fe2
FE
28#define CONFIG_MII
29#define IMX_FEC_BASE ENET_BASE_ADDR
30#define CONFIG_FEC_XCV_TYPE RGMII
31#define CONFIG_FEC_MXC_PHYADDR 0
32#define CONFIG_PHYLIB
33#define CONFIG_PHY_ATHEROS
34
f68a9c6b 35/* Framebuffer */
f68a9c6b
FE
36#define CONFIG_VIDEO_IPUV3
37#define CONFIG_IPUV3_CLK 260000000
38#define CONFIG_CFB_CONSOLE
39#define CONFIG_VGA_AS_SINGLE_DEVICE
f68a9c6b
FE
40#define CONFIG_VIDEO_BMP_RLE8
41#define CONFIG_SPLASH_SCREEN
42#define CONFIG_SPLASH_SCREEN_ALIGN
43#define CONFIG_BMP_16BPP
44#define CONFIG_VIDEO_LOGO
45#define CONFIG_VIDEO_BMP_LOGO
46#define CONFIG_IMX_HDMI
0e1f991e 47#define CONFIG_CMD_HDMIDETECT
f68a9c6b
FE
48#define CONFIG_IMX_VIDEO_SKIP
49
e1d74379 50/* USB */
e1d74379
FE
51#define CONFIG_USB_EHCI
52#define CONFIG_USB_EHCI_MX6
e1d74379
FE
53#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
54#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
55#define CONFIG_MXC_USB_FLAGS 0
56#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
c49cfdcd
FE
57#define CONFIG_USB_KEYBOARD
58#define CONFIG_SYS_USB_EVENT_POLL
0e1f991e
FE
59#define CONFIG_PREBOOT \
60 "if hdmidet; then " \
61 "usb start; " \
62 "setenv stdin serial,usbkbd; "\
63 "setenv stdout serial,vga; " \
64 "setenv stderr serial,vga; " \
65 "else " \
66 "setenv stdin serial; " \
67 "setenv stdout serial; " \
68 "setenv stderr serial; " \
69 "fi;"
e1d74379 70
b8ce6fe2 71/* Command definition */
b8ce6fe2 72
b8ce6fe2
FE
73#define CONFIG_MXC_UART_BASE UART1_BASE
74#define CONFIG_CONSOLE_DEV "ttymxc0"
b8ce6fe2
FE
75#define CONFIG_SYS_FSL_USDHC_NUM 1
76#define CONFIG_SYS_MMC_ENV_DEV 0 /* SDHC2 */
77
205d5869 78#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
1c5e6b6f 79#ifndef CONFIG_SPL_BUILD
b8ce6fe2 80#define CONFIG_EXTRA_ENV_SETTINGS \
205d5869 81 "fdtfile=undefined\0" \
6a305f22 82 "fdt_addr_r=0x18000000\0" \
1c5e6b6f
VC
83 "fdt_addr=0x18000000\0" \
84 "kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
85 "pxefile_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
86 "scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \
87 "ramdisk_addr_r=0x13000000\0" \
88 "ramdiskaddr=0x13000000\0" \
89 "initrd_high=0xffffffff\0" \
90 "fdt_high=0xffffffff\0" \
b8ce6fe2
FE
91 "ip_dyn=yes\0" \
92 "console=" CONFIG_CONSOLE_DEV "\0" \
93 "bootm_size=0x10000000\0" \
94 "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
b8ce6fe2
FE
95 "update_sd_firmware=" \
96 "if test ${ip_dyn} = yes; then " \
97 "setenv get_cmd dhcp; " \
98 "else " \
99 "setenv get_cmd tftp; " \
100 "fi; " \
101 "if mmc dev ${mmcdev}; then " \
102 "if ${get_cmd} ${update_sd_firmware_filename}; then " \
103 "setexpr fw_sz ${filesize} / 0x200; " \
104 "setexpr fw_sz ${fw_sz} + 1; " \
105 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
106 "fi; " \
107 "fi\0" \
205d5869
FE
108 "findfdt="\
109 "if test $board_name = HUMMINGBOARD && test $board_rev = MX6Q ; then " \
110 "setenv fdtfile imx6q-hummingboard.dtb; fi; " \
111 "if test $board_name = HUMMINGBOARD && test $board_rev = MX6DL ; then " \
112 "setenv fdtfile imx6dl-hummingboard.dtb; fi; " \
113 "if test $board_name = CUBOXI && test $board_rev = MX6Q ; then " \
114 "setenv fdtfile imx6q-cubox-i.dtb; fi; " \
115 "if test $board_name = CUBOXI && test $board_rev = MX6DL ; then " \
116 "setenv fdtfile imx6dl-cubox-i.dtb; fi; " \
117 "if test $fdtfile = undefined; then " \
118 "echo WARNING: Could not determine dtb to use; fi; \0" \
1c5e6b6f 119 BOOTENV
b8ce6fe2
FE
120
121#define CONFIG_BOOTCOMMAND \
205d5869 122 "run findfdt; " \
1c5e6b6f
VC
123 "run distro_bootcmd"
124
125#define BOOT_TARGET_DEVICES(func) \
126 func(MMC, mmc, 0) \
127 func(USB, usb, 0) \
128 func(PXE, pxe, na) \
129 func(DHCP, dhcp, na)
130
1c5e6b6f
VC
131#include <config_distro_bootcmd.h>
132
133#else
134#define CONFIG_EXTRA_ENV_SETTINGS
135#endif /* CONFIG_SPL_BUILD */
b8ce6fe2 136
b8ce6fe2
FE
137/* Physical Memory Map */
138#define CONFIG_NR_DRAM_BANKS 1
139#define CONFIG_SYS_SDRAM_BASE MMDC0_ARB_BASE_ADDR
140#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
141#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
142
143#define CONFIG_SYS_INIT_SP_OFFSET \
144 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
145#define CONFIG_SYS_INIT_SP_ADDR \
146 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
147
148/* Environment organization */
149#define CONFIG_ENV_SIZE (8 * 1024)
150#define CONFIG_ENV_IS_IN_MMC
151#define CONFIG_ENV_OFFSET (8 * 64 * 1024)
152
b8ce6fe2 153#endif /* __MX6CUBOXI_CONFIG_H */