[people/ms/u-boot.git] / include / configs / mx6cuboxi.h

/*
 * Copyright (C) 2015 Freescale Semiconductor, Inc.
 *
 * Configuration settings for the SolidRun mx6 based boards
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */
#ifndef __MX6CUBOXI_CONFIG_H
#define __MX6CUBOXI_CONFIG_H

#include <linux/sizes.h>
#include <asm/arch/imx-regs.h>
#include <asm/imx-common/gpio.h>
#include "mx6_common.h"

#define CONFIG_MX6
#define CONFIG_SPL_LIBCOMMON_SUPPORT
#define CONFIG_SPL_MMC_SUPPORT
#include "imx6_spl.h"

#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO
#define CONFIG_CMDLINE_TAG
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG
#define CONFIG_REVISION_TAG
#define CONFIG_IMX6_THERMAL
#define CONFIG_SYS_GENERIC_BOARD

#define CONFIG_SYS_MALLOC_LEN		(10 * SZ_1M)
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_BOARD_LATE_INIT
#define CONFIG_MXC_GPIO
#define CONFIG_MXC_UART
#define CONFIG_CMD_FUSE
#define CONFIG_MXC_OCOTP

/* MMC Configs */
#define CONFIG_FSL_ESDHC
#define CONFIG_FSL_USDHC
#define CONFIG_SYS_FSL_ESDHC_ADDR	USDHC2_BASE_ADDR
#define CONFIG_MMC
#define CONFIG_CMD_MMC
#define CONFIG_GENERIC_MMC
#define CONFIG_BOUNCE_BUFFER
#define CONFIG_CMD_EXT4
#define CONFIG_CMD_EXT4_WRITE
#define CONFIG_CMD_FAT
#define CONFIG_DOS_PARTITION

/* Ethernet Configuration */
#define CONFIG_FEC_MXC
#define CONFIG_CMD_PING
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_MII
#define CONFIG_CMD_NET
#define CONFIG_MII
#define IMX_FEC_BASE			ENET_BASE_ADDR
#define CONFIG_FEC_XCV_TYPE		RGMII
#define CONFIG_FEC_MXC_PHYADDR		0
#define CONFIG_PHYLIB
#define CONFIG_PHY_ATHEROS

/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_CONS_INDEX		1
#define CONFIG_BAUDRATE			115200

/* Framebuffer */
#define CONFIG_VIDEO
#define CONFIG_VIDEO_IPUV3
#define CONFIG_IPUV3_CLK		260000000
#define CONFIG_CFB_CONSOLE
#define CONFIG_VGA_AS_SINGLE_DEVICE
#define CONFIG_SYS_CONSOLE_IS_IN_ENV
#define CONFIG_VIDEO_BMP_RLE8
#define CONFIG_SPLASH_SCREEN
#define CONFIG_SPLASH_SCREEN_ALIGN
#define CONFIG_BMP_16BPP
#define CONFIG_VIDEO_LOGO
#define CONFIG_VIDEO_BMP_LOGO
#define CONFIG_IMX_HDMI
#define CONFIG_IMX_VIDEO_SKIP

#define CONFIG_SYS_NO_FLASH

/* Command definition */
#include <config_cmd_default.h>

#define CONFIG_CMD_BOOTZ
#define CONFIG_CMD_SETEXPR

#define CONFIG_BOOTDELAY		1

#define CONFIG_LOADADDR			0x12000000
#define CONFIG_SYS_TEXT_BASE		0x17800000

#define CONFIG_MXC_UART_BASE	UART1_BASE
#define CONFIG_CONSOLE_DEV	"ttymxc0"
#define CONFIG_MMCROOT		"/dev/mmcblk0p2"
#define CONFIG_SYS_FSL_USDHC_NUM	1
#define CONFIG_SYS_MMC_ENV_DEV		0	/* SDHC2 */

#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
#define CONFIG_EXTRA_ENV_SETTINGS \
	"script=boot.scr\0" \
	"image=zImage\0" \
	"fdtfile=undefined\0" \
	"fdt_addr_r=0x18000000\0" \
	"boot_fdt=try\0" \
	"ip_dyn=yes\0" \
	"console=" CONFIG_CONSOLE_DEV "\0" \
	"bootm_size=0x10000000\0" \
	"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
	"mmcpart=1\0" \
	"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
	"update_sd_firmware=" \
		"if test ${ip_dyn} = yes; then " \
			"setenv get_cmd dhcp; " \
		"else " \
			"setenv get_cmd tftp; " \
		"fi; " \
		"if mmc dev ${mmcdev}; then "	\
			"if ${get_cmd} ${update_sd_firmware_filename}; then " \
				"setexpr fw_sz ${filesize} / 0x200; " \
				"setexpr fw_sz ${fw_sz} + 1; "	\
				"mmc write ${loadaddr} 0x2 ${fw_sz}; " \
			"fi; "	\
		"fi\0" \
	"mmcargs=setenv bootargs console=${console},${baudrate} " \
		"root=${mmcroot}\0" \
	"loadbootscript=" \
		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
	"bootscript=echo Running bootscript from mmc ...; " \
		"source\0" \
	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr_r} ${fdtfile}\0" \
	"mmcboot=echo Booting from mmc ...; " \
		"run mmcargs; " \
		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
			"if run loadfdt; then " \
				"bootz ${loadaddr} - ${fdt_addr_r}; " \
			"else " \
				"if test ${boot_fdt} = try; then " \
					"bootz; " \
				"else " \
					"echo WARN: Cannot load the DT; " \
				"fi; " \
			"fi; " \
		"else " \
			"bootz; " \
		"fi;\0" \
	"netargs=setenv bootargs console=${console},${baudrate} " \
		"root=/dev/nfs " \
		"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
	"netboot=echo Booting from net ...; " \
		"run netargs; " \
		"if test ${ip_dyn} = yes; then " \
			"setenv get_cmd dhcp; " \
		"else " \
			"setenv get_cmd tftp; " \
		"fi; " \
		"${get_cmd} ${image}; " \
		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
			"if ${get_cmd} ${fdt_addr_r} ${fdtfile}; then " \
				"bootz ${loadaddr} - ${fdt_addr_r}; " \
			"else " \
				"if test ${boot_fdt} = try; then " \
					"bootz; " \
				"else " \
					"echo WARN: Cannot load the DT; " \
				"fi; " \
			"fi; " \
		"else " \
			"bootz; " \
		"fi;\0" \
	"findfdt="\
		"if test $board_name = HUMMINGBOARD && test $board_rev = MX6Q ; then " \
			"setenv fdtfile imx6q-hummingboard.dtb; fi; " \
		"if test $board_name = HUMMINGBOARD && test $board_rev = MX6DL ; then " \
			"setenv fdtfile imx6dl-hummingboard.dtb; fi; " \
		"if test $board_name = CUBOXI && test $board_rev = MX6Q ; then " \
			"setenv fdtfile imx6q-cubox-i.dtb; fi; " \
		"if test $board_name = CUBOXI && test $board_rev = MX6DL ; then " \
			"setenv fdtfile imx6dl-cubox-i.dtb; fi; " \
		"if test $fdtfile = undefined; then " \
			"echo WARNING: Could not determine dtb to use; fi; \0" \

#define CONFIG_BOOTCOMMAND \
	"run findfdt; " \
	"mmc dev ${mmcdev};" \
	"if mmc rescan; then " \
		"if run loadbootscript; then " \
		"run bootscript; " \
		"else " \
			"if run loadimage; then " \
				"run mmcboot; " \
			"else run netboot; " \
			"fi; " \
		"fi; " \
	"else run netboot; fi"

/* Miscellaneous configurable options */
#define CONFIG_SYS_LONGHELP
#define CONFIG_SYS_HUSH_PARSER
#define CONFIG_AUTO_COMPLETE
#define CONFIG_SYS_CBSIZE              256
#define CONFIG_SYS_MAXARGS             16
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE

#define CONFIG_SYS_LOAD_ADDR           CONFIG_LOADADDR

#define CONFIG_CMDLINE_EDITING

/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS           1
#define CONFIG_SYS_SDRAM_BASE          MMDC0_ARB_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE

#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

/* Environment organization */
#define CONFIG_ENV_SIZE			(8 * 1024)
#define CONFIG_ENV_IS_IN_MMC
#define CONFIG_ENV_OFFSET		(8 * 64 * 1024)

#define CONFIG_OF_LIBFDT
#define CONFIG_CMD_CACHE

#endif                         /* __MX6CUBOXI_CONFIG_H */
Commit	Line	Data
b8ce6fe2 FE	1	/*
	2	* Copyright (C) 2015 Freescale Semiconductor, Inc.
	3	*
	4	* Configuration settings for the SolidRun mx6 based boards
	5	*
	6	* SPDX-License-Identifier: GPL-2.0+
	7	*/
	8	#ifndef __MX6CUBOXI_CONFIG_H
	9	#define __MX6CUBOXI_CONFIG_H
	10
	11	#include <linux/sizes.h>
	12	#include <asm/arch/imx-regs.h>
	13	#include <asm/imx-common/gpio.h>
	14	#include "mx6_common.h"
	15
	16	#define CONFIG_MX6
	17	#define CONFIG_SPL_LIBCOMMON_SUPPORT
	18	#define CONFIG_SPL_MMC_SUPPORT
	19	#include "imx6_spl.h"
	20
	21	#define CONFIG_DISPLAY_CPUINFO
	22	#define CONFIG_DISPLAY_BOARDINFO
	23	#define CONFIG_CMDLINE_TAG
	24	#define CONFIG_SETUP_MEMORY_TAGS
	25	#define CONFIG_INITRD_TAG
	26	#define CONFIG_REVISION_TAG
	27	#define CONFIG_IMX6_THERMAL
	28	#define CONFIG_SYS_GENERIC_BOARD
	29
f68a9c6b	30	#define CONFIG_SYS_MALLOC_LEN (10 * SZ_1M)
b8ce6fe2	31	#define CONFIG_BOARD_EARLY_INIT_F
205d5869	32	#define CONFIG_BOARD_LATE_INIT
b8ce6fe2 FE	33	#define CONFIG_MXC_GPIO
	34	#define CONFIG_MXC_UART
	35	#define CONFIG_CMD_FUSE
	36	#define CONFIG_MXC_OCOTP
	37
	38	/* MMC Configs */
	39	#define CONFIG_FSL_ESDHC
	40	#define CONFIG_FSL_USDHC
	41	#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC2_BASE_ADDR
	42	#define CONFIG_MMC
	43	#define CONFIG_CMD_MMC
	44	#define CONFIG_GENERIC_MMC
	45	#define CONFIG_BOUNCE_BUFFER
	46	#define CONFIG_CMD_EXT4
	47	#define CONFIG_CMD_EXT4_WRITE
	48	#define CONFIG_CMD_FAT
	49	#define CONFIG_DOS_PARTITION
	50
	51	/* Ethernet Configuration */
	52	#define CONFIG_FEC_MXC
	53	#define CONFIG_CMD_PING
	54	#define CONFIG_CMD_DHCP
	55	#define CONFIG_CMD_MII
	56	#define CONFIG_CMD_NET
	57	#define CONFIG_MII
	58	#define IMX_FEC_BASE ENET_BASE_ADDR
	59	#define CONFIG_FEC_XCV_TYPE RGMII
	60	#define CONFIG_FEC_MXC_PHYADDR 0
	61	#define CONFIG_PHYLIB
	62	#define CONFIG_PHY_ATHEROS
	63
	64	/* allow to overwrite serial and ethaddr */
	65	#define CONFIG_ENV_OVERWRITE
	66	#define CONFIG_CONS_INDEX 1
	67	#define CONFIG_BAUDRATE 115200
	68
f68a9c6b FE	69	/* Framebuffer */
	70	#define CONFIG_VIDEO
	71	#define CONFIG_VIDEO_IPUV3
	72	#define CONFIG_IPUV3_CLK 260000000
	73	#define CONFIG_CFB_CONSOLE
	74	#define CONFIG_VGA_AS_SINGLE_DEVICE
	75	#define CONFIG_SYS_CONSOLE_IS_IN_ENV
	76	#define CONFIG_VIDEO_BMP_RLE8
	77	#define CONFIG_SPLASH_SCREEN
	78	#define CONFIG_SPLASH_SCREEN_ALIGN
	79	#define CONFIG_BMP_16BPP
	80	#define CONFIG_VIDEO_LOGO
	81	#define CONFIG_VIDEO_BMP_LOGO
	82	#define CONFIG_IMX_HDMI
	83	#define CONFIG_IMX_VIDEO_SKIP
	84
b8ce6fe2 FE	85	#define CONFIG_SYS_NO_FLASH
	86
	87	/* Command definition */
	88	#include <config_cmd_default.h>
	89
	90	#define CONFIG_CMD_BOOTZ
	91	#define CONFIG_CMD_SETEXPR
	92
	93	#define CONFIG_BOOTDELAY 1
	94
	95	#define CONFIG_LOADADDR 0x12000000
	96	#define CONFIG_SYS_TEXT_BASE 0x17800000
	97
	98	#define CONFIG_MXC_UART_BASE UART1_BASE
	99	#define CONFIG_CONSOLE_DEV "ttymxc0"
	100	#define CONFIG_MMCROOT "/dev/mmcblk0p2"
b8ce6fe2 FE	101	#define CONFIG_SYS_FSL_USDHC_NUM 1
	102	#define CONFIG_SYS_MMC_ENV_DEV 0 /* SDHC2 */
	103
205d5869	104	#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
b8ce6fe2 FE	105	#define CONFIG_EXTRA_ENV_SETTINGS \
	106	"script=boot.scr\0" \
	107	"image=zImage\0" \
205d5869	108	"fdtfile=undefined\0" \
6a305f22	109	"fdt_addr_r=0x18000000\0" \
b8ce6fe2 FE	110	"boot_fdt=try\0" \
	111	"ip_dyn=yes\0" \
	112	"console=" CONFIG_CONSOLE_DEV "\0" \
	113	"bootm_size=0x10000000\0" \
	114	"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
	115	"mmcpart=1\0" \
	116	"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
	117	"update_sd_firmware=" \
	118	"if test ${ip_dyn} = yes; then " \
	119	"setenv get_cmd dhcp; " \
	120	"else " \
	121	"setenv get_cmd tftp; " \
	122	"fi; " \
	123	"if mmc dev ${mmcdev}; then " \
	124	"if ${get_cmd} ${update_sd_firmware_filename}; then " \
	125	"setexpr fw_sz ${filesize} / 0x200; " \
	126	"setexpr fw_sz ${fw_sz} + 1; " \
	127	"mmc write ${loadaddr} 0x2 ${fw_sz}; " \
	128	"fi; " \
	129	"fi\0" \
	130	"mmcargs=setenv bootargs console=${console},${baudrate} " \
	131	"root=${mmcroot}\0" \
	132	"loadbootscript=" \
	133	"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
	134	"bootscript=echo Running bootscript from mmc ...; " \
	135	"source\0" \
	136	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
6a305f22	137	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr_r} ${fdtfile}\0" \
b8ce6fe2 FE	138	"mmcboot=echo Booting from mmc ...; " \
	139	"run mmcargs; " \
	140	"if test ${boot_fdt} = yes \|\| test ${boot_fdt} = try; then " \
	141	"if run loadfdt; then " \
6a305f22	142	"bootz ${loadaddr} - ${fdt_addr_r}; " \
b8ce6fe2 FE	143	"else " \
	144	"if test ${boot_fdt} = try; then " \
	145	"bootz; " \
	146	"else " \
	147	"echo WARN: Cannot load the DT; " \
	148	"fi; " \
	149	"fi; " \
	150	"else " \
	151	"bootz; " \
	152	"fi;\0" \
	153	"netargs=setenv bootargs console=${console},${baudrate} " \
	154	"root=/dev/nfs " \
	155	"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
	156	"netboot=echo Booting from net ...; " \
	157	"run netargs; " \
	158	"if test ${ip_dyn} = yes; then " \
	159	"setenv get_cmd dhcp; " \
	160	"else " \
	161	"setenv get_cmd tftp; " \
	162	"fi; " \
	163	"${get_cmd} ${image}; " \
	164	"if test ${boot_fdt} = yes \|\| test ${boot_fdt} = try; then " \
6a305f22 FE	165	"if ${get_cmd} ${fdt_addr_r} ${fdtfile}; then " \
6a305f22 FE	166	"bootz ${loadaddr} - ${fdt_addr_r}; " \
b8ce6fe2 FE	167	"else " \
	168	"if test ${boot_fdt} = try; then " \
	169	"bootz; " \
	170	"else " \
	171	"echo WARN: Cannot load the DT; " \
	172	"fi; " \
	173	"fi; " \
	174	"else " \
	175	"bootz; " \
205d5869 FE	176	"fi;\0" \
	177	"findfdt="\
	178	"if test $board_name = HUMMINGBOARD && test $board_rev = MX6Q ; then " \
	179	"setenv fdtfile imx6q-hummingboard.dtb; fi; " \
	180	"if test $board_name = HUMMINGBOARD && test $board_rev = MX6DL ; then " \
	181	"setenv fdtfile imx6dl-hummingboard.dtb; fi; " \
	182	"if test $board_name = CUBOXI && test $board_rev = MX6Q ; then " \
	183	"setenv fdtfile imx6q-cubox-i.dtb; fi; " \
	184	"if test $board_name = CUBOXI && test $board_rev = MX6DL ; then " \
	185	"setenv fdtfile imx6dl-cubox-i.dtb; fi; " \
	186	"if test $fdtfile = undefined; then " \
	187	"echo WARNING: Could not determine dtb to use; fi; \0" \
b8ce6fe2 FE	188
b8ce6fe2 FE	189	#define CONFIG_BOOTCOMMAND \
205d5869	190	"run findfdt; " \
b8ce6fe2 FE	191	"mmc dev ${mmcdev};" \
	192	"if mmc rescan; then " \
	193	"if run loadbootscript; then " \
	194	"run bootscript; " \
	195	"else " \
	196	"if run loadimage; then " \
	197	"run mmcboot; " \
	198	"else run netboot; " \
	199	"fi; " \
	200	"fi; " \
	201	"else run netboot; fi"
	202
	203	/* Miscellaneous configurable options */
	204	#define CONFIG_SYS_LONGHELP
	205	#define CONFIG_SYS_HUSH_PARSER
	206	#define CONFIG_AUTO_COMPLETE
	207	#define CONFIG_SYS_CBSIZE 256
	208	#define CONFIG_SYS_MAXARGS 16
	209	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
	210
	211	#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
	212
	213	#define CONFIG_CMDLINE_EDITING
	214
	215	/* Physical Memory Map */
	216	#define CONFIG_NR_DRAM_BANKS 1
	217	#define CONFIG_SYS_SDRAM_BASE MMDC0_ARB_BASE_ADDR
	218	#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
	219	#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
	220
	221	#define CONFIG_SYS_INIT_SP_OFFSET \
	222	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
	223	#define CONFIG_SYS_INIT_SP_ADDR \
	224	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
	225
	226	/* Environment organization */
	227	#define CONFIG_ENV_SIZE (8 * 1024)
	228	#define CONFIG_ENV_IS_IN_MMC
	229	#define CONFIG_ENV_OFFSET (8 * 64 * 1024)
	230
	231	#define CONFIG_OF_LIBFDT
	232	#define CONFIG_CMD_CACHE
	233
	234	#endif /* __MX6CUBOXI_CONFIG_H */