]> git.ipfire.org Git - u-boot.git/blame - include/configs/nas220.h
configs: Re-sync almost all of cmd/Kconfig
[u-boot.git] / include / configs / nas220.h
CommitLineData
9637c4b2
ED
1/*
2 * Copyright (C) 2014 Evgeni Dobrev <evgeni@studio-punkt.com>
3 *
4 * based on work from:
5 * (C) Copyright 2009
6 * Marvell Semiconductor <www.marvell.com>
7 * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
8 *
9 * SPDX-License-Identifier: GPL-2.0+
10 */
11
12#ifndef _CONFIG_NAS220_H
13#define _CONFIG_NAS220_H
14
15/*
16 * Machine type definition and ID
17 */
18#define MACH_TYPE_NAS220 MACH_TYPE_RD88F6192_NAS
19#define CONFIG_MACH_TYPE MACH_TYPE_NAS220
20#define CONFIG_IDENT_STRING "\nNAS 220"
21
22/*
23 * High Level Configuration Options (easy to change)
24 */
25#define CONFIG_FEROCEON_88FR131 /* #define CPU Core subversion */
26#define CONFIG_KW88F6192 /* SOC Name */
9637c4b2
ED
27#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
28
29/* power-on led, regulator, sata0, sata1 */
30#define NAS220_GE_OE_VAL_LOW ((1 << 12)|(1 << 14)|(1 << 24)|(1 << 28))
31#define NAS220_GE_OE_VAL_HIGH (0)
32#define NAS220_GE_OE_LOW (~((1 << 12)|(1 << 14)|(1 << 24)|(1 << 28)))
33#define NAS220_GE_OE_HIGH (~(0))
34
35/* PHY related */
36#define MV88E1116_LED_FCTRL_REG 10
37#define MV88E1116_CPRSP_CR3_REG 21
38#define MV88E1116_MAC_CTRL_REG 21
39#define MV88E1116_PGADR_REG 22
40#define MV88E1116_RGMII_TXTM_CTRL (1 << 4)
41#define MV88E1116_RGMII_RXTM_CTRL (1 << 5)
42
43/*
44 * Commands configuration
45 */
46#define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */
9637c4b2
ED
47#define CONFIG_CMD_MII
48#define CONFIG_CMD_NAND
9637c4b2
ED
49#define CONFIG_CMD_DATE
50#define CONFIG_CMD_IDE
51#define CONFIG_SYS_LONGHELP
52#define CONFIG_AUTO_COMPLETE
53#define CONFIG_CMDLINE_EDITING
9637c4b2
ED
54
55/*
56 * mv-common.h should be defined after CMD configs since it used them
57 * to enable certain macros
58 */
59#include "mv-common.h"
60
9637c4b2
ED
61/*
62 * Environment variables configurations
63 */
64#ifdef CONFIG_CMD_NAND
65#define CONFIG_ENV_IS_IN_NAND
66#define CONFIG_ENV_SECT_SIZE 0x10000
67#else
68#define CONFIG_ENV_IS_NOWHERE
69#endif
70
71#define CONFIG_ENV_SIZE 0x10000
72#define CONFIG_ENV_OFFSET 0xa0000
73
74/*
75 * Default environment variables
76 */
77#define CONFIG_BOOTCOMMAND ""
78
79#define CONFIG_EXTRA_ENV_SETTINGS \
80 "bootargs=console=ttyS0,115200\0" \
81 "mtdparts=mtdparts=orion_nand:0xa0000@0x0(uboot),"\
82 "0x010000@0xa0000(env),"\
83 "0x500000@0xc0000(uimage),"\
84 "0x1a40000@0x5c0000(rootfs)\0" \
85 "mtdids=nand0=orion_nand\0"\
86 "bootdelay=-1\0"\
87 "autostart=no\0"\
88 "autoload=no\0"
89
90/*
91 * Ethernet Driver configuration
92 */
93#ifdef CONFIG_CMD_NET
94#define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
95#define CONFIG_PHY_BASE_ADR 8
96#endif /* CONFIG_CMD_NET */
97
98/*
99 * USB/EHCI
100 */
101#ifdef CONFIG_CMD_USB
102#define CONFIG_USB_EHCI /* Enable EHCI USB support */
103#define CONFIG_USB_EHCI_KIRKWOOD /* on Kirkwood platform */
104#define CONFIG_EHCI_IS_TDI
105#define CONFIG_USB_STORAGE
106#define CONFIG_DOS_PARTITION
107#define CONFIG_SUPPORT_VFAT
108#endif /* CONFIG_CMD_USB */
109
110/*
111 * File system
112 */
113#define CONFIG_CMD_EXT2
114#define CONFIG_CMD_EXT4
115#define CONFIG_CMD_FAT
116#define CONFIG_CMD_JFFS2
117#define CONFIG_JFFS2_NAND
118#define CONFIG_JFFS2_LZO
119#define CONFIG_CMD_UBI
120#define CONFIG_CMD_UBIFS
121#define CONFIG_RBTREE
122#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
123#define CONFIG_MTD_PARTITIONS
124#define CONFIG_CMD_MTDPARTS
125#define CONFIG_LZO
126
127/*
128 * SATA
129 */
130#ifdef CONFIG_MVSATA_IDE
131#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
132#define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET
133#endif
134
9637c4b2
ED
135/*
136 * EFI partition
137 */
138#define CONFIG_EFI_PARTITION
139
140/*
141 * Date Time
142 */
143#ifdef CONFIG_CMD_DATE
144#define CONFIG_RTC_MV
145#endif /* CONFIG_CMD_DATE */
146
147#define CONFIG_KIRKWOOD_GPIO
148
149#endif /* _CONFIG_NAS220_H */
150