[people/ms/u-boot.git] / include / configs / nitrogen6x.h

/*
 * Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
 *
 * Configuration settings for the Boundary Devices Nitrogen6X
 * and Freescale i.MX6Q Sabre Lite boards.
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __CONFIG_H
#define __CONFIG_H

#include "mx6_common.h"
#define CONFIG_MX6
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO

#define CONFIG_MACH_TYPE	3769

#include <asm/arch/imx-regs.h>
#include <asm/imx-common/gpio.h>

#define CONFIG_CMDLINE_TAG
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG
#define CONFIG_REVISION_TAG
#define CONFIG_SYS_GENERIC_BOARD

/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN		(10 * 1024 * 1024)

#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_MISC_INIT_R
#define CONFIG_MXC_GPIO
#define CONFIG_CMD_GPIO
#define CONFIG_CI_UDC
#define CONFIG_USBD_HS
#define CONFIG_USB_GADGET_DUALSPEED
#define CONFIG_USB_ETHER
#define CONFIG_USB_ETH_CDC
#define CONFIG_NETCONSOLE

#define CONFIG_CMD_FUSE
#ifdef CONFIG_CMD_FUSE
#define CONFIG_MXC_OCOTP
#endif

#define CONFIG_MXC_UART
#define CONFIG_MXC_UART_BASE	       UART2_BASE

#define CONFIG_CMD_SF
#ifdef CONFIG_CMD_SF
#define CONFIG_SPI_FLASH
#define CONFIG_SPI_FLASH_SST
#define CONFIG_MXC_SPI
#define CONFIG_SF_DEFAULT_BUS  0
#define CONFIG_SF_DEFAULT_CS   0
#define CONFIG_SF_DEFAULT_SPEED 25000000
#define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0)
#endif

/* I2C Configs */
#define CONFIG_CMD_I2C
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
#define CONFIG_SYS_I2C_SPEED		100000
#define CONFIG_I2C_EDID

/* MMC Configs */
#define CONFIG_FSL_ESDHC
#define CONFIG_FSL_USDHC
#define CONFIG_SYS_FSL_ESDHC_ADDR      0
#define CONFIG_SYS_FSL_USDHC_NUM       2

#define CONFIG_MMC
#define CONFIG_CMD_MMC
#define CONFIG_GENERIC_MMC
#define CONFIG_BOUNCE_BUFFER
#define CONFIG_CMD_EXT2
#define CONFIG_CMD_EXT4
#define CONFIG_CMD_EXT4_WRITE
#define CONFIG_CMD_FAT
#define CONFIG_DOS_PARTITION

#ifdef CONFIG_MX6Q
#define CONFIG_CMD_SATA
#endif

/*
 * SATA Configs
 */
#ifdef CONFIG_CMD_SATA
#define CONFIG_DWC_AHSATA
#define CONFIG_SYS_SATA_MAX_DEVICE	1
#define CONFIG_DWC_AHSATA_PORT_ID	0
#define CONFIG_DWC_AHSATA_BASE_ADDR	SATA_ARB_BASE_ADDR
#define CONFIG_LBA48
#define CONFIG_LIBATA
#endif

#define CONFIG_CMD_PING
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_MII
#define CONFIG_CMD_NET
#define CONFIG_FEC_MXC
#define CONFIG_MII
#define IMX_FEC_BASE			ENET_BASE_ADDR
#define CONFIG_FEC_XCV_TYPE		RGMII
#define CONFIG_ETHPRIME			"FEC"
#define CONFIG_FEC_MXC_PHYADDR		6
#define CONFIG_PHYLIB
#define CONFIG_PHY_MICREL
#define CONFIG_PHY_MICREL_KSZ9021

/* USB Configs */
#define CONFIG_CMD_USB
#define CONFIG_CMD_FAT
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_MX6
#define CONFIG_USB_STORAGE
#define CONFIG_USB_HOST_ETHER
#define CONFIG_USB_ETHER_ASIX
#define CONFIG_USB_ETHER_MCS7830
#define CONFIG_USB_ETHER_SMSC95XX
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET	/* For OTG port */
#define CONFIG_MXC_USB_PORTSC	(PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS	0
#define CONFIG_USB_KEYBOARD
#define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP

/* Miscellaneous commands */
#define CONFIG_CMD_BMODE
#define CONFIG_CMD_SETEXPR

/* Framebuffer and LCD */
#define CONFIG_VIDEO
#define CONFIG_VIDEO_IPUV3
#define CONFIG_CFB_CONSOLE
#define CONFIG_VGA_AS_SINGLE_DEVICE
#define CONFIG_SYS_CONSOLE_IS_IN_ENV
#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
#define CONFIG_VIDEO_BMP_RLE8
#define CONFIG_SPLASH_SCREEN
#define CONFIG_SPLASH_SCREEN_ALIGN
#define CONFIG_VIDEO_BMP_GZIP
#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (6 * 1024 * 1024)
#define CONFIG_BMP_16BPP
#define CONFIG_IPUV3_CLK 260000000
#define CONFIG_CMD_HDMIDETECT
#define CONFIG_CONSOLE_MUX
#define CONFIG_IMX_HDMI
#define CONFIG_IMX_VIDEO_SKIP

/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_CONS_INDEX	       1
#define CONFIG_BAUDRATE			       115200

/* Command definition */
#include <config_cmd_default.h>

#undef CONFIG_CMD_IMLS

#define CONFIG_BOOTDELAY	       1

#define CONFIG_PREBOOT                 ""

#define CONFIG_LOADADDR			       0x12000000
#define CONFIG_SYS_TEXT_BASE	       0x17800000

#ifdef CONFIG_CMD_SATA
#define CONFIG_DRIVE_SATA "sata "
#else
#define CONFIG_DRIVE_SATA
#endif

#ifdef CONFIG_CMD_MMC
#define CONFIG_DRIVE_MMC "mmc "
#else
#define CONFIG_DRIVE_MMC
#endif

#ifdef CONFIG_USB_STORAGE
#define CONFIG_DRIVE_USB "usb "
#else
#define CONFIG_DRIVE_USB
#endif

#define CONFIG_DRIVE_TYPES CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC CONFIG_DRIVE_USB
#define CONFIG_UMSDEVS CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC

#if defined(CONFIG_SABRELITE)
#define CONFIG_EXTRA_ENV_SETTINGS \
	"script=boot.scr\0" \
	"uimage=uImage\0" \
	"console=ttymxc1\0" \
	"fdt_high=0xffffffff\0" \
	"initrd_high=0xffffffff\0" \
	"fdt_file=imx6q-sabrelite.dtb\0" \
	"fdt_addr=0x18000000\0" \
	"boot_fdt=try\0" \
	"ip_dyn=yes\0" \
	"mmcdevs=0 1\0" \
	"mmcpart=1\0" \
	"mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
	"mmcargs=setenv bootargs console=${console},${baudrate} " \
		"root=${mmcroot}\0" \
	"loadbootscript=" \
		"load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
	"bootscript=echo Running bootscript from mmc ...; " \
		"source\0" \
	"loaduimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
	"loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
	"mmcboot=echo Booting from mmc ...; " \
		"run mmcargs; " \
		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
			"if run loadfdt; then " \
				"bootm ${loadaddr} - ${fdt_addr}; " \
			"else " \
				"if test ${boot_fdt} = try; then " \
					"bootm; " \
				"else " \
					"echo WARN: Cannot load the DT; " \
				"fi; " \
			"fi; " \
		"else " \
			"bootm; " \
		"fi;\0" \
	"netargs=setenv bootargs console=${console},${baudrate} " \
		"root=/dev/nfs " \
	"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
		"netboot=echo Booting from net ...; " \
		"run netargs; " \
		"if test ${ip_dyn} = yes; then " \
			"setenv get_cmd dhcp; " \
		"else " \
			"setenv get_cmd tftp; " \
		"fi; " \
		"${get_cmd} ${uimage}; " \
		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
			"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
				"bootm ${loadaddr} - ${fdt_addr}; " \
			"else " \
				"if test ${boot_fdt} = try; then " \
					"bootm; " \
				"else " \
					"echo WARN: Cannot load the DT; " \
				"fi; " \
			"fi; " \
		"else " \
			"bootm; " \
		"fi;\0"

#define CONFIG_BOOTCOMMAND \
	"for mmcdev in ${mmcdevs}; do " \
		"mmc dev ${mmcdev}; " \
		"if mmc rescan; then " \
			"if run loadbootscript; then " \
				"run bootscript; " \
			"else " \
				"if run loaduimage; then " \
					"run mmcboot; " \
				"fi; " \
			"fi; " \
		"fi; " \
	"done; " \
	"run netboot; "
#else
#define CONFIG_EXTRA_ENV_SETTINGS \
	"bootdevs=" CONFIG_DRIVE_TYPES "\0" \
	"umsdevs=" CONFIG_UMSDEVS "\0" \
	"console=ttymxc1\0" \
	"clearenv=if sf probe || sf probe || sf probe 1 ; then " \
		"sf erase 0xc0000 0x2000 && " \
		"echo restored environment to factory default ; fi\0" \
	"bootcmd=for dtype in ${bootdevs}" \
		"; do " \
			"if itest.s \"xusb\" == \"x${dtype}\" ; then " \
				"usb start ;" \
			"fi; " \
			"for disk in 0 1 ; do ${dtype} dev ${disk} ;" \
				"load " \
					"${dtype} ${disk}:1 " \
					"10008000 " \
					"/6x_bootscript" \
					"&& source 10008000 ; " \
			"done ; " \
		"done; " \
		"setenv stdout serial,vga ; " \
		"echo ; echo 6x_bootscript not found ; " \
		"echo ; echo serial console at 115200, 8N1 ; echo ; " \
		"echo details at http://boundarydevices.com/6q_bootscript ; " \
		"setenv stdout serial;" \
		"setenv stdin serial,usbkbd;" \
		"for dtype in ${umsdevs} ; do " \
			"if itest.s sata == ${dtype}; then " \
				"initcmd='sata init' ;" \
			"else " \
				"initcmd='mmc rescan' ;" \
			"fi; " \
			"for disk in 0 1 ; do " \
				"if $initcmd && $dtype dev $disk ; then " \
					"setenv stdout serial,vga; " \
					"echo expose ${dtype} ${disk} " \
						"over USB; " \
					"ums 0 $dtype $disk ;" \
				"fi; " \
		"	done; " \
		"done ;" \
		"setenv stdout serial,vga; " \
		"echo no block devices found;" \
		"\0" \
	"initrd_high=0xffffffff\0" \
	"upgradeu=for dtype in ${bootdevs}" \
		"; do " \
		"for disk in 0 1 ; do ${dtype} dev ${disk} ;" \
			"load ${dtype} ${disk}:1 10008000 " \
				"/6x_upgrade " \
				"&& source 10008000 ; " \
		"done ; " \
	"done\0" \

#endif
/* Miscellaneous configurable options */
#define CONFIG_SYS_LONGHELP
#define CONFIG_SYS_HUSH_PARSER
#define CONFIG_SYS_PROMPT	       "U-Boot > "
#define CONFIG_AUTO_COMPLETE
#define CONFIG_SYS_CBSIZE	       1024
#define CONFIG_SYS_MAXARGS	       48
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE

#define CONFIG_SYS_MEMTEST_START       0x10000000
#define CONFIG_SYS_MEMTEST_END	       0x10010000
#define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000

#define CONFIG_SYS_LOAD_ADDR	       CONFIG_LOADADDR

#define CONFIG_CMDLINE_EDITING

/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS	       1
#define PHYS_SDRAM		       MMDC0_ARB_BASE_ADDR

#define CONFIG_SYS_SDRAM_BASE	       PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE

#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

/* FLASH and environment organization */
#define CONFIG_SYS_NO_FLASH

#define CONFIG_ENV_SIZE			(8 * 1024)

#if defined(CONFIG_SABRELITE)
#define CONFIG_ENV_IS_IN_MMC
#else
#define CONFIG_ENV_IS_IN_SPI_FLASH
#endif

#if defined(CONFIG_ENV_IS_IN_MMC)
#define CONFIG_ENV_OFFSET		(6 * 64 * 1024)
#define CONFIG_SYS_MMC_ENV_DEV		0
#elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
#define CONFIG_ENV_OFFSET		(768 * 1024)
#define CONFIG_ENV_SECT_SIZE		(8 * 1024)
#define CONFIG_ENV_SPI_BUS		CONFIG_SF_DEFAULT_BUS
#define CONFIG_ENV_SPI_CS		CONFIG_SF_DEFAULT_CS
#define CONFIG_ENV_SPI_MODE		CONFIG_SF_DEFAULT_MODE
#define CONFIG_ENV_SPI_MAX_HZ		CONFIG_SF_DEFAULT_SPEED
#endif

#define CONFIG_OF_LIBFDT
#define CONFIG_CMD_BOOTZ

#ifndef CONFIG_SYS_DCACHE_OFF
#define CONFIG_CMD_CACHE
#endif

#define CONFIG_CMD_BMP

#define CONFIG_CMD_TIME
#define CONFIG_CMD_MEMTEST
#define CONFIG_SYS_ALT_MEMTEST

#define CONFIG_CMD_BOOTZ
#define CONFIG_SUPPORT_RAW_INITRD
#define CONFIG_CMD_FS_GENERIC

/*
 * PCI express
 */
#ifdef CONFIG_CMD_PCI
#define CONFIG_PCI
#define CONFIG_PCI_PNP
#define CONFIG_PCI_SCAN_SHOW
#define CONFIG_PCIE_IMX
#endif

#define CONFIG_CMD_ELF

#define CONFIG_USB_GADGET
#define CONFIG_CMD_USB_MASS_STORAGE
#define CONFIG_USB_GADGET_MASS_STORAGE
#define CONFIG_USBDOWNLOAD_GADGET
#define CONFIG_USB_GADGET_VBUS_DRAW	2

/* Netchip IDs */
#define CONFIG_G_DNL_VENDOR_NUM 0x0525
#define CONFIG_G_DNL_PRODUCT_NUM 0xa4a5
#define CONFIG_G_DNL_MANUFACTURER "Boundary"

#define CONFIG_CMD_FASTBOOT
#define CONFIG_ANDROID_BOOT_IMAGE
#define CONFIG_USB_FASTBOOT_BUF_ADDR   CONFIG_SYS_LOAD_ADDR
#define CONFIG_USB_FASTBOOT_BUF_SIZE   0x07000000

#endif	       /* __CONFIG_H */
Commit	Line	Data
d67b0d97 EN	1	/*
	2	* Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
	3	*
	4	* Configuration settings for the Boundary Devices Nitrogen6X
	5	* and Freescale i.MX6Q Sabre Lite boards.
	6	*
1a459660	7	* SPDX-License-Identifier: GPL-2.0+
d67b0d97 EN	8	*/
	9
	10	#ifndef __CONFIG_H
	11	#define __CONFIG_H
	12
02824dc7	13	#include "mx6_common.h"
d67b0d97 EN	14	#define CONFIG_MX6
	15	#define CONFIG_DISPLAY_CPUINFO
	16	#define CONFIG_DISPLAY_BOARDINFO
	17
	18	#define CONFIG_MACH_TYPE 3769
	19
	20	#include <asm/arch/imx-regs.h>
	21	#include <asm/imx-common/gpio.h>
	22
	23	#define CONFIG_CMDLINE_TAG
	24	#define CONFIG_SETUP_MEMORY_TAGS
	25	#define CONFIG_INITRD_TAG
	26	#define CONFIG_REVISION_TAG
f7155fa3	27	#define CONFIG_SYS_GENERIC_BOARD
d67b0d97 EN	28
	29	/* Size of malloc() pool */
	30	#define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024)
	31
	32	#define CONFIG_BOARD_EARLY_INIT_F
	33	#define CONFIG_MISC_INIT_R
	34	#define CONFIG_MXC_GPIO
c0e7bd66	35	#define CONFIG_CMD_GPIO
f016f8ca	36	#define CONFIG_CI_UDC
f3d7cff5 TK	37	#define CONFIG_USBD_HS
	38	#define CONFIG_USB_GADGET_DUALSPEED
	39	#define CONFIG_USB_ETHER
	40	#define CONFIG_USB_ETH_CDC
	41	#define CONFIG_NETCONSOLE
d67b0d97	42
70a5ef21 BT	43	#define CONFIG_CMD_FUSE
	44	#ifdef CONFIG_CMD_FUSE
	45	#define CONFIG_MXC_OCOTP
	46	#endif
	47
d67b0d97 EN	48	#define CONFIG_MXC_UART
	49	#define CONFIG_MXC_UART_BASE UART2_BASE
	50
	51	#define CONFIG_CMD_SF
	52	#ifdef CONFIG_CMD_SF
	53	#define CONFIG_SPI_FLASH
	54	#define CONFIG_SPI_FLASH_SST
	55	#define CONFIG_MXC_SPI
	56	#define CONFIG_SF_DEFAULT_BUS 0
155fa9af	57	#define CONFIG_SF_DEFAULT_CS 0
d67b0d97 EN	58	#define CONFIG_SF_DEFAULT_SPEED 25000000
	59	#define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0)
	60	#endif
	61
	62	/* I2C Configs */
	63	#define CONFIG_CMD_I2C
b089d039	64	#define CONFIG_SYS_I2C
b089d039	65	#define CONFIG_SYS_I2C_MXC
f8cb101e	66	#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
d67b0d97	67	#define CONFIG_SYS_I2C_SPEED 100000
5dbdc3cf	68	#define CONFIG_I2C_EDID
d67b0d97	69
d67b0d97 EN	70	/* MMC Configs */
	71	#define CONFIG_FSL_ESDHC
	72	#define CONFIG_FSL_USDHC
	73	#define CONFIG_SYS_FSL_ESDHC_ADDR 0
	74	#define CONFIG_SYS_FSL_USDHC_NUM 2
	75
	76	#define CONFIG_MMC
	77	#define CONFIG_CMD_MMC
	78	#define CONFIG_GENERIC_MMC
	79	#define CONFIG_BOUNCE_BUFFER
	80	#define CONFIG_CMD_EXT2
5e3a388c KM	81	#define CONFIG_CMD_EXT4
5e3a388c KM	82	#define CONFIG_CMD_EXT4_WRITE
d67b0d97 EN	83	#define CONFIG_CMD_FAT
	84	#define CONFIG_DOS_PARTITION
	85
	86	#ifdef CONFIG_MX6Q
	87	#define CONFIG_CMD_SATA
	88	#endif
	89
	90	/*
	91	* SATA Configs
	92	*/
	93	#ifdef CONFIG_CMD_SATA
	94	#define CONFIG_DWC_AHSATA
	95	#define CONFIG_SYS_SATA_MAX_DEVICE 1
	96	#define CONFIG_DWC_AHSATA_PORT_ID 0
	97	#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR
	98	#define CONFIG_LBA48
	99	#define CONFIG_LIBATA
	100	#endif
	101
	102	#define CONFIG_CMD_PING
	103	#define CONFIG_CMD_DHCP
	104	#define CONFIG_CMD_MII
	105	#define CONFIG_CMD_NET
	106	#define CONFIG_FEC_MXC
	107	#define CONFIG_MII
	108	#define IMX_FEC_BASE ENET_BASE_ADDR
	109	#define CONFIG_FEC_XCV_TYPE RGMII
	110	#define CONFIG_ETHPRIME "FEC"
	111	#define CONFIG_FEC_MXC_PHYADDR 6
	112	#define CONFIG_PHYLIB
	113	#define CONFIG_PHY_MICREL
	114	#define CONFIG_PHY_MICREL_KSZ9021
	115
	116	/* USB Configs */
	117	#define CONFIG_CMD_USB
	118	#define CONFIG_CMD_FAT
	119	#define CONFIG_USB_EHCI
	120	#define CONFIG_USB_EHCI_MX6
	121	#define CONFIG_USB_STORAGE
	122	#define CONFIG_USB_HOST_ETHER
	123	#define CONFIG_USB_ETHER_ASIX
a743415f	124	#define CONFIG_USB_ETHER_MCS7830
d67b0d97	125	#define CONFIG_USB_ETHER_SMSC95XX
d1a52860 TK	126	#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
d1a52860 TK	127	#define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */
d67b0d97 EN	128	#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI \| PORT_PTS_PTW)
d67b0d97 EN	129	#define CONFIG_MXC_USB_FLAGS 0
c36c0008 EN	130	#define CONFIG_USB_KEYBOARD
c36c0008 EN	131	#define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
d67b0d97 EN	132
	133	/* Miscellaneous commands */
	134	#define CONFIG_CMD_BMODE
	135	#define CONFIG_CMD_SETEXPR
	136
	137	/* Framebuffer and LCD */
	138	#define CONFIG_VIDEO
	139	#define CONFIG_VIDEO_IPUV3
	140	#define CONFIG_CFB_CONSOLE
	141	#define CONFIG_VGA_AS_SINGLE_DEVICE
	142	#define CONFIG_SYS_CONSOLE_IS_IN_ENV
	143	#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
	144	#define CONFIG_VIDEO_BMP_RLE8
	145	#define CONFIG_SPLASH_SCREEN
761bc195 EN	146	#define CONFIG_SPLASH_SCREEN_ALIGN
	147	#define CONFIG_VIDEO_BMP_GZIP
	148	#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (6 * 1024 * 1024)
d67b0d97	149	#define CONFIG_BMP_16BPP
d67b0d97 EN	150	#define CONFIG_IPUV3_CLK 260000000
	151	#define CONFIG_CMD_HDMIDETECT
	152	#define CONFIG_CONSOLE_MUX
5ea7f0e3	153	#define CONFIG_IMX_HDMI
a47e4495	154	#define CONFIG_IMX_VIDEO_SKIP
d67b0d97 EN	155
	156	/* allow to overwrite serial and ethaddr */
	157	#define CONFIG_ENV_OVERWRITE
	158	#define CONFIG_CONS_INDEX 1
	159	#define CONFIG_BAUDRATE 115200
	160
	161	/* Command definition */
	162	#include <config_cmd_default.h>
	163
	164	#undef CONFIG_CMD_IMLS
	165
	166	#define CONFIG_BOOTDELAY 1
	167
	168	#define CONFIG_PREBOOT ""
	169
	170	#define CONFIG_LOADADDR 0x12000000
	171	#define CONFIG_SYS_TEXT_BASE 0x17800000
	172
	173	#ifdef CONFIG_CMD_SATA
	174	#define CONFIG_DRIVE_SATA "sata "
	175	#else
	176	#define CONFIG_DRIVE_SATA
	177	#endif
	178
	179	#ifdef CONFIG_CMD_MMC
	180	#define CONFIG_DRIVE_MMC "mmc "
	181	#else
	182	#define CONFIG_DRIVE_MMC
	183	#endif
	184
5b7103e0 DR	185	#ifdef CONFIG_USB_STORAGE
	186	#define CONFIG_DRIVE_USB "usb "
	187	#else
	188	#define CONFIG_DRIVE_USB
	189	#endif
	190
	191	#define CONFIG_DRIVE_TYPES CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC CONFIG_DRIVE_USB
8d97b3ad	192	#define CONFIG_UMSDEVS CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC
d67b0d97	193
f8b1e86d FE	194	#if defined(CONFIG_SABRELITE)
	195	#define CONFIG_EXTRA_ENV_SETTINGS \
	196	"script=boot.scr\0" \
	197	"uimage=uImage\0" \
	198	"console=ttymxc1\0" \
	199	"fdt_high=0xffffffff\0" \
	200	"initrd_high=0xffffffff\0" \
	201	"fdt_file=imx6q-sabrelite.dtb\0" \
6584a1b5	202	"fdt_addr=0x18000000\0" \
f8b1e86d FE	203	"boot_fdt=try\0" \
f8b1e86d FE	204	"ip_dyn=yes\0" \
05d1c245	205	"mmcdevs=0 1\0" \
f8b1e86d FE	206	"mmcpart=1\0" \
	207	"mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
	208	"mmcargs=setenv bootargs console=${console},${baudrate} " \
	209	"root=${mmcroot}\0" \
	210	"loadbootscript=" \
3ee96c7d	211	"load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
f8b1e86d FE	212	"bootscript=echo Running bootscript from mmc ...; " \
f8b1e86d FE	213	"source\0" \
3ee96c7d GG	214	"loaduimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
3ee96c7d GG	215	"loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
f8b1e86d FE	216	"mmcboot=echo Booting from mmc ...; " \
	217	"run mmcargs; " \
	218	"if test ${boot_fdt} = yes \|\| test ${boot_fdt} = try; then " \
	219	"if run loadfdt; then " \
	220	"bootm ${loadaddr} - ${fdt_addr}; " \
	221	"else " \
	222	"if test ${boot_fdt} = try; then " \
	223	"bootm; " \
	224	"else " \
	225	"echo WARN: Cannot load the DT; " \
	226	"fi; " \
	227	"fi; " \
	228	"else " \
	229	"bootm; " \
	230	"fi;\0" \
	231	"netargs=setenv bootargs console=${console},${baudrate} " \
	232	"root=/dev/nfs " \
	233	"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
	234	"netboot=echo Booting from net ...; " \
	235	"run netargs; " \
	236	"if test ${ip_dyn} = yes; then " \
	237	"setenv get_cmd dhcp; " \
	238	"else " \
	239	"setenv get_cmd tftp; " \
	240	"fi; " \
	241	"${get_cmd} ${uimage}; " \
	242	"if test ${boot_fdt} = yes \|\| test ${boot_fdt} = try; then " \
	243	"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
	244	"bootm ${loadaddr} - ${fdt_addr}; " \
	245	"else " \
	246	"if test ${boot_fdt} = try; then " \
	247	"bootm; " \
	248	"else " \
	249	"echo WARN: Cannot load the DT; " \
	250	"fi; " \
	251	"fi; " \
	252	"else " \
	253	"bootm; " \
	254	"fi;\0"
	255
	256	#define CONFIG_BOOTCOMMAND \
05d1c245 GG	257	"for mmcdev in ${mmcdevs}; do " \
	258	"mmc dev ${mmcdev}; " \
	259	"if mmc rescan; then " \
	260	"if run loadbootscript; then " \
	261	"run bootscript; " \
	262	"else " \
	263	"if run loaduimage; then " \
	264	"run mmcboot; " \
	265	"fi; " \
	266	"fi; " \
	267	"fi; " \
	268	"done; " \
	269	"run netboot; "
f8b1e86d	270	#else
d67b0d97	271	#define CONFIG_EXTRA_ENV_SETTINGS \
5b7103e0	272	"bootdevs=" CONFIG_DRIVE_TYPES "\0" \
8d97b3ad	273	"umsdevs=" CONFIG_UMSDEVS "\0" \
d67b0d97 EN	274	"console=ttymxc1\0" \
	275	"clearenv=if sf probe \|\| sf probe \|\| sf probe 1 ; then " \
	276	"sf erase 0xc0000 0x2000 && " \
	277	"echo restored environment to factory default ; fi\0" \
5b7103e0	278	"bootcmd=for dtype in ${bootdevs}" \
d67b0d97	279	"; do " \
5b7103e0 DR	280	"if itest.s \"xusb\" == \"x${dtype}\" ; then " \
	281	"usb start ;" \
	282	"fi; " \
d67b0d97	283	"for disk in 0 1 ; do ${dtype} dev ${disk} ;" \
43a3431c KM	284	"load " \
	285	"${dtype} ${disk}:1 " \
	286	"10008000 " \
	287	"/6x_bootscript" \
	288	"&& source 10008000 ; " \
d67b0d97 EN	289	"done ; " \
	290	"done; " \
	291	"setenv stdout serial,vga ; " \
	292	"echo ; echo 6x_bootscript not found ; " \
	293	"echo ; echo serial console at 115200, 8N1 ; echo ; " \
	294	"echo details at http://boundarydevices.com/6q_bootscript ; " \
8d97b3ad EN	295	"setenv stdout serial;" \
	296	"setenv stdin serial,usbkbd;" \
	297	"for dtype in ${umsdevs} ; do " \
	298	"if itest.s sata == ${dtype}; then " \
	299	"initcmd='sata init' ;" \
	300	"else " \
	301	"initcmd='mmc rescan' ;" \
	302	"fi; " \
	303	"for disk in 0 1 ; do " \
	304	"if $initcmd && $dtype dev $disk ; then " \
	305	"setenv stdout serial,vga; " \
	306	"echo expose ${dtype} ${disk} " \
	307	"over USB; " \
	308	"ums 0 $dtype $disk ;" \
	309	"fi; " \
	310	" done; " \
	311	"done ;" \
	312	"setenv stdout serial,vga; " \
	313	"echo no block devices found;" \
	314	"\0" \
8145ccc3	315	"initrd_high=0xffffffff\0" \
5b7103e0	316	"upgradeu=for dtype in ${bootdevs}" \
d67b0d97 EN	317	"; do " \
d67b0d97 EN	318	"for disk in 0 1 ; do ${dtype} dev ${disk} ;" \
43a3431c KM	319	"load ${dtype} ${disk}:1 10008000 " \
	320	"/6x_upgrade " \
	321	"&& source 10008000 ; " \
d67b0d97 EN	322	"done ; " \
	323	"done\0" \
	324
f8b1e86d	325	#endif
d67b0d97 EN	326	/* Miscellaneous configurable options */
	327	#define CONFIG_SYS_LONGHELP
	328	#define CONFIG_SYS_HUSH_PARSER
	329	#define CONFIG_SYS_PROMPT "U-Boot > "
	330	#define CONFIG_AUTO_COMPLETE
	331	#define CONFIG_SYS_CBSIZE 1024
3f5d964e	332	#define CONFIG_SYS_MAXARGS 48
d67b0d97 EN	333	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
	334
	335	#define CONFIG_SYS_MEMTEST_START 0x10000000
	336	#define CONFIG_SYS_MEMTEST_END 0x10010000
	337	#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000
	338
	339	#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
d67b0d97 EN	340
	341	#define CONFIG_CMDLINE_EDITING
	342
	343	/* Physical Memory Map */
	344	#define CONFIG_NR_DRAM_BANKS 1
	345	#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
	346
	347	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
	348	#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
	349	#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
	350
	351	#define CONFIG_SYS_INIT_SP_OFFSET \
	352	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
	353	#define CONFIG_SYS_INIT_SP_ADDR \
	354	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
	355
	356	/* FLASH and environment organization */
	357	#define CONFIG_SYS_NO_FLASH
	358
	359	#define CONFIG_ENV_SIZE (8 * 1024)
	360
f8b1e86d FE	361	#if defined(CONFIG_SABRELITE)
	362	#define CONFIG_ENV_IS_IN_MMC
	363	#else
d67b0d97	364	#define CONFIG_ENV_IS_IN_SPI_FLASH
f8b1e86d	365	#endif
d67b0d97 EN	366
	367	#if defined(CONFIG_ENV_IS_IN_MMC)
	368	#define CONFIG_ENV_OFFSET (6 * 64 * 1024)
	369	#define CONFIG_SYS_MMC_ENV_DEV 0
	370	#elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
	371	#define CONFIG_ENV_OFFSET (768 * 1024)
	372	#define CONFIG_ENV_SECT_SIZE (8 * 1024)
	373	#define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS
	374	#define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS
	375	#define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE
	376	#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
	377	#endif
	378
	379	#define CONFIG_OF_LIBFDT
	380	#define CONFIG_CMD_BOOTZ
	381
d67b0d97 EN	382	#ifndef CONFIG_SYS_DCACHE_OFF
	383	#define CONFIG_CMD_CACHE
	384	#endif
	385
	386	#define CONFIG_CMD_BMP
	387
	388	#define CONFIG_CMD_TIME
d3d70e6f	389	#define CONFIG_CMD_MEMTEST
d67b0d97 EN	390	#define CONFIG_SYS_ALT_MEMTEST
d67b0d97 EN	391
9b9ba6f0	392	#define CONFIG_CMD_BOOTZ
36558295	393	#define CONFIG_SUPPORT_RAW_INITRD
262326b4	394	#define CONFIG_CMD_FS_GENERIC
9b9ba6f0	395
147f8fa3 MV	396	/*
	397	* PCI express
	398	*/
147f8fa3 MV	399	#ifdef CONFIG_CMD_PCI
	400	#define CONFIG_PCI
	401	#define CONFIG_PCI_PNP
	402	#define CONFIG_PCI_SCAN_SHOW
	403	#define CONFIG_PCIE_IMX
	404	#endif
	405
84e2dc0c EN	406	#define CONFIG_CMD_ELF
	407
	408	#define CONFIG_USB_GADGET
	409	#define CONFIG_CMD_USB_MASS_STORAGE
	410	#define CONFIG_USB_GADGET_MASS_STORAGE
	411	#define CONFIG_USBDOWNLOAD_GADGET
	412	#define CONFIG_USB_GADGET_VBUS_DRAW 2
	413
	414	/* Netchip IDs */
	415	#define CONFIG_G_DNL_VENDOR_NUM 0x0525
	416	#define CONFIG_G_DNL_PRODUCT_NUM 0xa4a5
	417	#define CONFIG_G_DNL_MANUFACTURER "Boundary"
	418
e9feee63 EN	419	#define CONFIG_CMD_FASTBOOT
	420	#define CONFIG_ANDROID_BOOT_IMAGE
	421	#define CONFIG_USB_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR
	422	#define CONFIG_USB_FASTBOOT_BUF_SIZE 0x07000000
	423
d67b0d97	424	#endif /* __CONFIG_H */