[people/ms/u-boot.git] / include / configs / nitrogen6x.h

/*
 * Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
 *
 * Configuration settings for the Boundary Devices Nitrogen6X
 * and Freescale i.MX6Q Sabre Lite boards.
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __CONFIG_H
#define __CONFIG_H

#include "mx6_common.h"
#define CONFIG_MX6
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO

#define CONFIG_MACH_TYPE	3769

#include <asm/arch/imx-regs.h>
#include <asm/imx-common/gpio.h>

#define CONFIG_CMDLINE_TAG
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG
#define CONFIG_REVISION_TAG
#define CONFIG_SYS_GENERIC_BOARD

/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN		(10 * 1024 * 1024)

#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_MISC_INIT_R
#define CONFIG_MXC_GPIO
#define CONFIG_CI_UDC
#define CONFIG_USBD_HS
#define CONFIG_USB_GADGET_DUALSPEED
#define CONFIG_USB_ETHER
#define CONFIG_USB_ETH_CDC
#define CONFIG_NETCONSOLE

#define CONFIG_CMD_FUSE
#ifdef CONFIG_CMD_FUSE
#define CONFIG_MXC_OCOTP
#endif

#define CONFIG_MXC_UART
#define CONFIG_MXC_UART_BASE	       UART2_BASE

#define CONFIG_CMD_SF
#ifdef CONFIG_CMD_SF
#define CONFIG_SPI_FLASH
#define CONFIG_SPI_FLASH_SST
#define CONFIG_MXC_SPI
#define CONFIG_SF_DEFAULT_BUS  0
#define CONFIG_SF_DEFAULT_CS   (0|(IMX_GPIO_NR(3, 19)<<8))
#define CONFIG_SF_DEFAULT_SPEED 25000000
#define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0)
#endif

/* I2C Configs */
#define CONFIG_CMD_I2C
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_SPEED		100000

/* MMC Configs */
#define CONFIG_FSL_ESDHC
#define CONFIG_FSL_USDHC
#define CONFIG_SYS_FSL_ESDHC_ADDR      0
#define CONFIG_SYS_FSL_USDHC_NUM       2

#define CONFIG_MMC
#define CONFIG_CMD_MMC
#define CONFIG_GENERIC_MMC
#define CONFIG_BOUNCE_BUFFER
#define CONFIG_CMD_EXT2
#define CONFIG_CMD_FAT
#define CONFIG_DOS_PARTITION

#ifdef CONFIG_MX6Q
#define CONFIG_CMD_SATA
#endif

/*
 * SATA Configs
 */
#ifdef CONFIG_CMD_SATA
#define CONFIG_DWC_AHSATA
#define CONFIG_SYS_SATA_MAX_DEVICE	1
#define CONFIG_DWC_AHSATA_PORT_ID	0
#define CONFIG_DWC_AHSATA_BASE_ADDR	SATA_ARB_BASE_ADDR
#define CONFIG_LBA48
#define CONFIG_LIBATA
#endif

#define CONFIG_CMD_PING
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_MII
#define CONFIG_CMD_NET
#define CONFIG_FEC_MXC
#define CONFIG_MII
#define IMX_FEC_BASE			ENET_BASE_ADDR
#define CONFIG_FEC_XCV_TYPE		RGMII
#define CONFIG_ETHPRIME			"FEC"
#define CONFIG_FEC_MXC_PHYADDR		6
#define CONFIG_PHYLIB
#define CONFIG_PHY_MICREL
#define CONFIG_PHY_MICREL_KSZ9021

/* USB Configs */
#define CONFIG_CMD_USB
#define CONFIG_CMD_FAT
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_MX6
#define CONFIG_USB_STORAGE
#define CONFIG_USB_HOST_ETHER
#define CONFIG_USB_ETHER_ASIX
#define CONFIG_USB_ETHER_MCS7830
#define CONFIG_USB_ETHER_SMSC95XX
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET	/* For OTG port */
#define CONFIG_MXC_USB_PORTSC	(PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS	0

/* Miscellaneous commands */
#define CONFIG_CMD_BMODE
#define CONFIG_CMD_SETEXPR

/* Framebuffer and LCD */
#define CONFIG_VIDEO
#define CONFIG_VIDEO_IPUV3
#define CONFIG_CFB_CONSOLE
#define CONFIG_VGA_AS_SINGLE_DEVICE
#define CONFIG_SYS_CONSOLE_IS_IN_ENV
#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
#define CONFIG_VIDEO_BMP_RLE8
#define CONFIG_SPLASH_SCREEN
#define CONFIG_BMP_16BPP
#define CONFIG_VIDEO_LOGO
#define CONFIG_IPUV3_CLK 260000000
#define CONFIG_CMD_HDMIDETECT
#define CONFIG_CONSOLE_MUX
#define CONFIG_IMX_HDMI
#define CONFIG_IMX_VIDEO_SKIP

/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_CONS_INDEX	       1
#define CONFIG_BAUDRATE			       115200

/* Command definition */
#include <config_cmd_default.h>

#undef CONFIG_CMD_IMLS

#define CONFIG_BOOTDELAY	       1

#define CONFIG_PREBOOT                 ""

#define CONFIG_LOADADDR			       0x12000000
#define CONFIG_SYS_TEXT_BASE	       0x17800000

#ifdef CONFIG_CMD_SATA
#define CONFIG_DRIVE_SATA "sata "
#else
#define CONFIG_DRIVE_SATA
#endif

#ifdef CONFIG_CMD_MMC
#define CONFIG_DRIVE_MMC "mmc "
#else
#define CONFIG_DRIVE_MMC
#endif

#ifdef CONFIG_USB_STORAGE
#define CONFIG_DRIVE_USB "usb "
#else
#define CONFIG_DRIVE_USB
#endif

#define CONFIG_DRIVE_TYPES CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC CONFIG_DRIVE_USB
#define CONFIG_UMSDEVS CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC

#if defined(CONFIG_SABRELITE)
#define CONFIG_EXTRA_ENV_SETTINGS \
	"script=boot.scr\0" \
	"uimage=uImage\0" \
	"console=ttymxc1\0" \
	"fdt_high=0xffffffff\0" \
	"initrd_high=0xffffffff\0" \
	"fdt_file=imx6q-sabrelite.dtb\0" \
	"fdt_addr=0x18000000\0" \
	"boot_fdt=try\0" \
	"ip_dyn=yes\0" \
	"mmcdevs=0 1\0" \
	"mmcpart=1\0" \
	"mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
	"mmcargs=setenv bootargs console=${console},${baudrate} " \
		"root=${mmcroot}\0" \
	"loadbootscript=" \
		"load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
	"bootscript=echo Running bootscript from mmc ...; " \
		"source\0" \
	"loaduimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
	"loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
	"mmcboot=echo Booting from mmc ...; " \
		"run mmcargs; " \
		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
			"if run loadfdt; then " \
				"bootm ${loadaddr} - ${fdt_addr}; " \
			"else " \
				"if test ${boot_fdt} = try; then " \
					"bootm; " \
				"else " \
					"echo WARN: Cannot load the DT; " \
				"fi; " \
			"fi; " \
		"else " \
			"bootm; " \
		"fi;\0" \
	"netargs=setenv bootargs console=${console},${baudrate} " \
		"root=/dev/nfs " \
	"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
		"netboot=echo Booting from net ...; " \
		"run netargs; " \
		"if test ${ip_dyn} = yes; then " \
			"setenv get_cmd dhcp; " \
		"else " \
			"setenv get_cmd tftp; " \
		"fi; " \
		"${get_cmd} ${uimage}; " \
		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
			"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
				"bootm ${loadaddr} - ${fdt_addr}; " \
			"else " \
				"if test ${boot_fdt} = try; then " \
					"bootm; " \
				"else " \
					"echo WARN: Cannot load the DT; " \
				"fi; " \
			"fi; " \
		"else " \
			"bootm; " \
		"fi;\0"

#define CONFIG_BOOTCOMMAND \
	"for mmcdev in ${mmcdevs}; do " \
		"mmc dev ${mmcdev}; " \
		"if mmc rescan; then " \
			"if run loadbootscript; then " \
				"run bootscript; " \
			"else " \
				"if run loaduimage; then " \
					"run mmcboot; " \
				"fi; " \
			"fi; " \
		"fi; " \
	"done; " \
	"run netboot; "
#else
#define CONFIG_EXTRA_ENV_SETTINGS \
	"bootdevs=" CONFIG_DRIVE_TYPES "\0" \
	"umsdevs=" CONFIG_UMSDEVS "\0" \
	"console=ttymxc1\0" \
	"clearenv=if sf probe || sf probe || sf probe 1 ; then " \
		"sf erase 0xc0000 0x2000 && " \
		"echo restored environment to factory default ; fi\0" \
	"bootcmd=for dtype in ${bootdevs}" \
		"; do " \
			"if itest.s \"xusb\" == \"x${dtype}\" ; then " \
				"usb start ;" \
			"fi; " \
			"for disk in 0 1 ; do ${dtype} dev ${disk} ;" \
				"load " \
					"${dtype} ${disk}:1 " \
					"10008000 " \
					"/6x_bootscript" \
					"&& source 10008000 ; " \
			"done ; " \
		"done; " \
		"setenv stdout serial,vga ; " \
		"echo ; echo 6x_bootscript not found ; " \
		"echo ; echo serial console at 115200, 8N1 ; echo ; " \
		"echo details at http://boundarydevices.com/6q_bootscript ; " \
		"setenv stdout serial;" \
		"setenv stdin serial,usbkbd;" \
		"for dtype in ${umsdevs} ; do " \
			"if itest.s sata == ${dtype}; then " \
				"initcmd='sata init' ;" \
			"else " \
				"initcmd='mmc rescan' ;" \
			"fi; " \
			"for disk in 0 1 ; do " \
				"if $initcmd && $dtype dev $disk ; then " \
					"setenv stdout serial,vga; " \
					"echo expose ${dtype} ${disk} " \
						"over USB; " \
					"ums 0 $dtype $disk ;" \
				"fi; " \
		"	done; " \
		"done ;" \
		"setenv stdout serial,vga; " \
		"echo no block devices found;" \
		"\0" \
	"initrd_high=0xffffffff\0" \
	"upgradeu=for dtype in ${bootdevs}" \
		"; do " \
		"for disk in 0 1 ; do ${dtype} dev ${disk} ;" \
			"load ${dtype} ${disk}:1 10008000 " \
				"/6x_upgrade " \
				"&& source 10008000 ; " \
		"done ; " \
	"done\0" \

#endif
/* Miscellaneous configurable options */
#define CONFIG_SYS_LONGHELP
#define CONFIG_SYS_HUSH_PARSER
#define CONFIG_SYS_PROMPT	       "U-Boot > "
#define CONFIG_AUTO_COMPLETE
#define CONFIG_SYS_CBSIZE	       1024

/* Print Buffer Size */
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
#define CONFIG_SYS_MAXARGS	       16
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE

#define CONFIG_SYS_MEMTEST_START       0x10000000
#define CONFIG_SYS_MEMTEST_END	       0x10010000
#define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000

#define CONFIG_SYS_LOAD_ADDR	       CONFIG_LOADADDR

#define CONFIG_CMDLINE_EDITING

/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS	       1
#define PHYS_SDRAM		       MMDC0_ARB_BASE_ADDR

#define CONFIG_SYS_SDRAM_BASE	       PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE

#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

/* FLASH and environment organization */
#define CONFIG_SYS_NO_FLASH

#define CONFIG_ENV_SIZE			(8 * 1024)

#if defined(CONFIG_SABRELITE)
#define CONFIG_ENV_IS_IN_MMC
#else
#define CONFIG_ENV_IS_IN_SPI_FLASH
#endif

#if defined(CONFIG_ENV_IS_IN_MMC)
#define CONFIG_ENV_OFFSET		(6 * 64 * 1024)
#define CONFIG_SYS_MMC_ENV_DEV		0
#elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
#define CONFIG_ENV_OFFSET		(768 * 1024)
#define CONFIG_ENV_SECT_SIZE		(8 * 1024)
#define CONFIG_ENV_SPI_BUS		CONFIG_SF_DEFAULT_BUS
#define CONFIG_ENV_SPI_CS		CONFIG_SF_DEFAULT_CS
#define CONFIG_ENV_SPI_MODE		CONFIG_SF_DEFAULT_MODE
#define CONFIG_ENV_SPI_MAX_HZ		CONFIG_SF_DEFAULT_SPEED
#endif

#define CONFIG_OF_LIBFDT
#define CONFIG_CMD_BOOTZ

#ifndef CONFIG_SYS_DCACHE_OFF
#define CONFIG_CMD_CACHE
#endif

#define CONFIG_CMD_BMP

#define CONFIG_CMD_TIME
#define CONFIG_SYS_ALT_MEMTEST

#define CONFIG_CMD_BOOTZ
#define CONFIG_SUPPORT_RAW_INITRD
#define CONFIG_CMD_FS_GENERIC

/*
 * PCI express
 */
#ifdef CONFIG_CMD_PCI
#define CONFIG_PCI
#define CONFIG_PCI_PNP
#define CONFIG_PCI_SCAN_SHOW
#define CONFIG_PCIE_IMX
#endif

#define CONFIG_CMD_ELF

#define CONFIG_USB_GADGET
#define CONFIG_CMD_USB_MASS_STORAGE
#define CONFIG_USB_GADGET_MASS_STORAGE
#define CONFIG_USBDOWNLOAD_GADGET
#define CONFIG_USB_GADGET_VBUS_DRAW	2

/* Netchip IDs */
#define CONFIG_G_DNL_VENDOR_NUM 0x0525
#define CONFIG_G_DNL_PRODUCT_NUM 0xa4a5
#define CONFIG_G_DNL_MANUFACTURER "Boundary"

#endif	       /* __CONFIG_H */
Commit	Line	Data
d67b0d97 EN	1	/*
	2	* Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
	3	*
	4	* Configuration settings for the Boundary Devices Nitrogen6X
	5	* and Freescale i.MX6Q Sabre Lite boards.
	6	*
1a459660	7	* SPDX-License-Identifier: GPL-2.0+
d67b0d97 EN	8	*/
	9
	10	#ifndef __CONFIG_H
	11	#define __CONFIG_H
	12
02824dc7	13	#include "mx6_common.h"
d67b0d97 EN	14	#define CONFIG_MX6
	15	#define CONFIG_DISPLAY_CPUINFO
	16	#define CONFIG_DISPLAY_BOARDINFO
	17
	18	#define CONFIG_MACH_TYPE 3769
	19
	20	#include <asm/arch/imx-regs.h>
	21	#include <asm/imx-common/gpio.h>
	22
	23	#define CONFIG_CMDLINE_TAG
	24	#define CONFIG_SETUP_MEMORY_TAGS
	25	#define CONFIG_INITRD_TAG
	26	#define CONFIG_REVISION_TAG
f7155fa3	27	#define CONFIG_SYS_GENERIC_BOARD
d67b0d97 EN	28
	29	/* Size of malloc() pool */
	30	#define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024)
	31
	32	#define CONFIG_BOARD_EARLY_INIT_F
	33	#define CONFIG_MISC_INIT_R
	34	#define CONFIG_MXC_GPIO
f016f8ca	35	#define CONFIG_CI_UDC
f3d7cff5 TK	36	#define CONFIG_USBD_HS
	37	#define CONFIG_USB_GADGET_DUALSPEED
	38	#define CONFIG_USB_ETHER
	39	#define CONFIG_USB_ETH_CDC
	40	#define CONFIG_NETCONSOLE
d67b0d97	41
70a5ef21 BT	42	#define CONFIG_CMD_FUSE
	43	#ifdef CONFIG_CMD_FUSE
	44	#define CONFIG_MXC_OCOTP
	45	#endif
	46
d67b0d97 EN	47	#define CONFIG_MXC_UART
	48	#define CONFIG_MXC_UART_BASE UART2_BASE
	49
	50	#define CONFIG_CMD_SF
	51	#ifdef CONFIG_CMD_SF
	52	#define CONFIG_SPI_FLASH
	53	#define CONFIG_SPI_FLASH_SST
	54	#define CONFIG_MXC_SPI
	55	#define CONFIG_SF_DEFAULT_BUS 0
	56	#define CONFIG_SF_DEFAULT_CS (0\|(IMX_GPIO_NR(3, 19)<<8))
	57	#define CONFIG_SF_DEFAULT_SPEED 25000000
	58	#define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0)
	59	#endif
	60
	61	/* I2C Configs */
	62	#define CONFIG_CMD_I2C
b089d039	63	#define CONFIG_SYS_I2C
b089d039	64	#define CONFIG_SYS_I2C_MXC
d67b0d97 EN	65	#define CONFIG_SYS_I2C_SPEED 100000
d67b0d97 EN	66
d67b0d97 EN	67	/* MMC Configs */
	68	#define CONFIG_FSL_ESDHC
	69	#define CONFIG_FSL_USDHC
	70	#define CONFIG_SYS_FSL_ESDHC_ADDR 0
	71	#define CONFIG_SYS_FSL_USDHC_NUM 2
	72
	73	#define CONFIG_MMC
	74	#define CONFIG_CMD_MMC
	75	#define CONFIG_GENERIC_MMC
	76	#define CONFIG_BOUNCE_BUFFER
	77	#define CONFIG_CMD_EXT2
	78	#define CONFIG_CMD_FAT
	79	#define CONFIG_DOS_PARTITION
	80
	81	#ifdef CONFIG_MX6Q
	82	#define CONFIG_CMD_SATA
	83	#endif
	84
	85	/*
	86	* SATA Configs
	87	*/
	88	#ifdef CONFIG_CMD_SATA
	89	#define CONFIG_DWC_AHSATA
	90	#define CONFIG_SYS_SATA_MAX_DEVICE 1
	91	#define CONFIG_DWC_AHSATA_PORT_ID 0
	92	#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR
	93	#define CONFIG_LBA48
	94	#define CONFIG_LIBATA
	95	#endif
	96
	97	#define CONFIG_CMD_PING
	98	#define CONFIG_CMD_DHCP
	99	#define CONFIG_CMD_MII
	100	#define CONFIG_CMD_NET
	101	#define CONFIG_FEC_MXC
	102	#define CONFIG_MII
	103	#define IMX_FEC_BASE ENET_BASE_ADDR
	104	#define CONFIG_FEC_XCV_TYPE RGMII
	105	#define CONFIG_ETHPRIME "FEC"
	106	#define CONFIG_FEC_MXC_PHYADDR 6
	107	#define CONFIG_PHYLIB
	108	#define CONFIG_PHY_MICREL
	109	#define CONFIG_PHY_MICREL_KSZ9021
	110
	111	/* USB Configs */
	112	#define CONFIG_CMD_USB
	113	#define CONFIG_CMD_FAT
	114	#define CONFIG_USB_EHCI
	115	#define CONFIG_USB_EHCI_MX6
	116	#define CONFIG_USB_STORAGE
	117	#define CONFIG_USB_HOST_ETHER
	118	#define CONFIG_USB_ETHER_ASIX
a743415f	119	#define CONFIG_USB_ETHER_MCS7830
d67b0d97	120	#define CONFIG_USB_ETHER_SMSC95XX
d1a52860 TK	121	#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
d1a52860 TK	122	#define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */
d67b0d97 EN	123	#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI \| PORT_PTS_PTW)
	124	#define CONFIG_MXC_USB_FLAGS 0
	125
	126	/* Miscellaneous commands */
	127	#define CONFIG_CMD_BMODE
	128	#define CONFIG_CMD_SETEXPR
	129
	130	/* Framebuffer and LCD */
	131	#define CONFIG_VIDEO
	132	#define CONFIG_VIDEO_IPUV3
	133	#define CONFIG_CFB_CONSOLE
	134	#define CONFIG_VGA_AS_SINGLE_DEVICE
	135	#define CONFIG_SYS_CONSOLE_IS_IN_ENV
	136	#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
	137	#define CONFIG_VIDEO_BMP_RLE8
	138	#define CONFIG_SPLASH_SCREEN
	139	#define CONFIG_BMP_16BPP
	140	#define CONFIG_VIDEO_LOGO
	141	#define CONFIG_IPUV3_CLK 260000000
	142	#define CONFIG_CMD_HDMIDETECT
	143	#define CONFIG_CONSOLE_MUX
5ea7f0e3	144	#define CONFIG_IMX_HDMI
a47e4495	145	#define CONFIG_IMX_VIDEO_SKIP
d67b0d97 EN	146
	147	/* allow to overwrite serial and ethaddr */
	148	#define CONFIG_ENV_OVERWRITE
	149	#define CONFIG_CONS_INDEX 1
	150	#define CONFIG_BAUDRATE 115200
	151
	152	/* Command definition */
	153	#include <config_cmd_default.h>
	154
	155	#undef CONFIG_CMD_IMLS
	156
	157	#define CONFIG_BOOTDELAY 1
	158
	159	#define CONFIG_PREBOOT ""
	160
	161	#define CONFIG_LOADADDR 0x12000000
	162	#define CONFIG_SYS_TEXT_BASE 0x17800000
	163
	164	#ifdef CONFIG_CMD_SATA
	165	#define CONFIG_DRIVE_SATA "sata "
	166	#else
	167	#define CONFIG_DRIVE_SATA
	168	#endif
	169
	170	#ifdef CONFIG_CMD_MMC
	171	#define CONFIG_DRIVE_MMC "mmc "
	172	#else
	173	#define CONFIG_DRIVE_MMC
	174	#endif
	175
5b7103e0 DR	176	#ifdef CONFIG_USB_STORAGE
	177	#define CONFIG_DRIVE_USB "usb "
	178	#else
	179	#define CONFIG_DRIVE_USB
	180	#endif
	181
	182	#define CONFIG_DRIVE_TYPES CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC CONFIG_DRIVE_USB
8d97b3ad	183	#define CONFIG_UMSDEVS CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC
d67b0d97	184
f8b1e86d FE	185	#if defined(CONFIG_SABRELITE)
	186	#define CONFIG_EXTRA_ENV_SETTINGS \
	187	"script=boot.scr\0" \
	188	"uimage=uImage\0" \
	189	"console=ttymxc1\0" \
	190	"fdt_high=0xffffffff\0" \
	191	"initrd_high=0xffffffff\0" \
	192	"fdt_file=imx6q-sabrelite.dtb\0" \
6584a1b5	193	"fdt_addr=0x18000000\0" \
f8b1e86d FE	194	"boot_fdt=try\0" \
f8b1e86d FE	195	"ip_dyn=yes\0" \
05d1c245	196	"mmcdevs=0 1\0" \
f8b1e86d FE	197	"mmcpart=1\0" \
	198	"mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
	199	"mmcargs=setenv bootargs console=${console},${baudrate} " \
	200	"root=${mmcroot}\0" \
	201	"loadbootscript=" \
3ee96c7d	202	"load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
f8b1e86d FE	203	"bootscript=echo Running bootscript from mmc ...; " \
f8b1e86d FE	204	"source\0" \
3ee96c7d GG	205	"loaduimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
3ee96c7d GG	206	"loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
f8b1e86d FE	207	"mmcboot=echo Booting from mmc ...; " \
	208	"run mmcargs; " \
	209	"if test ${boot_fdt} = yes \|\| test ${boot_fdt} = try; then " \
	210	"if run loadfdt; then " \
	211	"bootm ${loadaddr} - ${fdt_addr}; " \
	212	"else " \
	213	"if test ${boot_fdt} = try; then " \
	214	"bootm; " \
	215	"else " \
	216	"echo WARN: Cannot load the DT; " \
	217	"fi; " \
	218	"fi; " \
	219	"else " \
	220	"bootm; " \
	221	"fi;\0" \
	222	"netargs=setenv bootargs console=${console},${baudrate} " \
	223	"root=/dev/nfs " \
	224	"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
	225	"netboot=echo Booting from net ...; " \
	226	"run netargs; " \
	227	"if test ${ip_dyn} = yes; then " \
	228	"setenv get_cmd dhcp; " \
	229	"else " \
	230	"setenv get_cmd tftp; " \
	231	"fi; " \
	232	"${get_cmd} ${uimage}; " \
	233	"if test ${boot_fdt} = yes \|\| test ${boot_fdt} = try; then " \
	234	"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
	235	"bootm ${loadaddr} - ${fdt_addr}; " \
	236	"else " \
	237	"if test ${boot_fdt} = try; then " \
	238	"bootm; " \
	239	"else " \
	240	"echo WARN: Cannot load the DT; " \
	241	"fi; " \
	242	"fi; " \
	243	"else " \
	244	"bootm; " \
	245	"fi;\0"
	246
	247	#define CONFIG_BOOTCOMMAND \
05d1c245 GG	248	"for mmcdev in ${mmcdevs}; do " \
	249	"mmc dev ${mmcdev}; " \
	250	"if mmc rescan; then " \
	251	"if run loadbootscript; then " \
	252	"run bootscript; " \
	253	"else " \
	254	"if run loaduimage; then " \
	255	"run mmcboot; " \
	256	"fi; " \
	257	"fi; " \
	258	"fi; " \
	259	"done; " \
	260	"run netboot; "
f8b1e86d	261	#else
d67b0d97	262	#define CONFIG_EXTRA_ENV_SETTINGS \
5b7103e0	263	"bootdevs=" CONFIG_DRIVE_TYPES "\0" \
8d97b3ad	264	"umsdevs=" CONFIG_UMSDEVS "\0" \
d67b0d97 EN	265	"console=ttymxc1\0" \
	266	"clearenv=if sf probe \|\| sf probe \|\| sf probe 1 ; then " \
	267	"sf erase 0xc0000 0x2000 && " \
	268	"echo restored environment to factory default ; fi\0" \
5b7103e0	269	"bootcmd=for dtype in ${bootdevs}" \
d67b0d97	270	"; do " \
5b7103e0 DR	271	"if itest.s \"xusb\" == \"x${dtype}\" ; then " \
	272	"usb start ;" \
	273	"fi; " \
d67b0d97	274	"for disk in 0 1 ; do ${dtype} dev ${disk} ;" \
43a3431c KM	275	"load " \
	276	"${dtype} ${disk}:1 " \
	277	"10008000 " \
	278	"/6x_bootscript" \
	279	"&& source 10008000 ; " \
d67b0d97 EN	280	"done ; " \
	281	"done; " \
	282	"setenv stdout serial,vga ; " \
	283	"echo ; echo 6x_bootscript not found ; " \
	284	"echo ; echo serial console at 115200, 8N1 ; echo ; " \
	285	"echo details at http://boundarydevices.com/6q_bootscript ; " \
8d97b3ad EN	286	"setenv stdout serial;" \
	287	"setenv stdin serial,usbkbd;" \
	288	"for dtype in ${umsdevs} ; do " \
	289	"if itest.s sata == ${dtype}; then " \
	290	"initcmd='sata init' ;" \
	291	"else " \
	292	"initcmd='mmc rescan' ;" \
	293	"fi; " \
	294	"for disk in 0 1 ; do " \
	295	"if $initcmd && $dtype dev $disk ; then " \
	296	"setenv stdout serial,vga; " \
	297	"echo expose ${dtype} ${disk} " \
	298	"over USB; " \
	299	"ums 0 $dtype $disk ;" \
	300	"fi; " \
	301	" done; " \
	302	"done ;" \
	303	"setenv stdout serial,vga; " \
	304	"echo no block devices found;" \
	305	"\0" \
8145ccc3	306	"initrd_high=0xffffffff\0" \
5b7103e0	307	"upgradeu=for dtype in ${bootdevs}" \
d67b0d97 EN	308	"; do " \
d67b0d97 EN	309	"for disk in 0 1 ; do ${dtype} dev ${disk} ;" \
43a3431c KM	310	"load ${dtype} ${disk}:1 10008000 " \
	311	"/6x_upgrade " \
	312	"&& source 10008000 ; " \
d67b0d97 EN	313	"done ; " \
	314	"done\0" \
	315
f8b1e86d	316	#endif
d67b0d97 EN	317	/* Miscellaneous configurable options */
	318	#define CONFIG_SYS_LONGHELP
	319	#define CONFIG_SYS_HUSH_PARSER
	320	#define CONFIG_SYS_PROMPT "U-Boot > "
	321	#define CONFIG_AUTO_COMPLETE
	322	#define CONFIG_SYS_CBSIZE 1024
	323
	324	/* Print Buffer Size */
	325	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
	326	#define CONFIG_SYS_MAXARGS 16
	327	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
	328
	329	#define CONFIG_SYS_MEMTEST_START 0x10000000
	330	#define CONFIG_SYS_MEMTEST_END 0x10010000
	331	#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000
	332
	333	#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
d67b0d97 EN	334
	335	#define CONFIG_CMDLINE_EDITING
	336
	337	/* Physical Memory Map */
	338	#define CONFIG_NR_DRAM_BANKS 1
	339	#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
	340
	341	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
	342	#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
	343	#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
	344
	345	#define CONFIG_SYS_INIT_SP_OFFSET \
	346	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
	347	#define CONFIG_SYS_INIT_SP_ADDR \
	348	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
	349
	350	/* FLASH and environment organization */
	351	#define CONFIG_SYS_NO_FLASH
	352
	353	#define CONFIG_ENV_SIZE (8 * 1024)
	354
f8b1e86d FE	355	#if defined(CONFIG_SABRELITE)
	356	#define CONFIG_ENV_IS_IN_MMC
	357	#else
d67b0d97	358	#define CONFIG_ENV_IS_IN_SPI_FLASH
f8b1e86d	359	#endif
d67b0d97 EN	360
	361	#if defined(CONFIG_ENV_IS_IN_MMC)
	362	#define CONFIG_ENV_OFFSET (6 * 64 * 1024)
	363	#define CONFIG_SYS_MMC_ENV_DEV 0
	364	#elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
	365	#define CONFIG_ENV_OFFSET (768 * 1024)
	366	#define CONFIG_ENV_SECT_SIZE (8 * 1024)
	367	#define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS
	368	#define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS
	369	#define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE
	370	#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
	371	#endif
	372
	373	#define CONFIG_OF_LIBFDT
	374	#define CONFIG_CMD_BOOTZ
	375
d67b0d97 EN	376	#ifndef CONFIG_SYS_DCACHE_OFF
	377	#define CONFIG_CMD_CACHE
	378	#endif
	379
	380	#define CONFIG_CMD_BMP
	381
	382	#define CONFIG_CMD_TIME
	383	#define CONFIG_SYS_ALT_MEMTEST
	384
9b9ba6f0	385	#define CONFIG_CMD_BOOTZ
36558295	386	#define CONFIG_SUPPORT_RAW_INITRD
262326b4	387	#define CONFIG_CMD_FS_GENERIC
9b9ba6f0	388
147f8fa3 MV	389	/*
	390	* PCI express
	391	*/
147f8fa3 MV	392	#ifdef CONFIG_CMD_PCI
	393	#define CONFIG_PCI
	394	#define CONFIG_PCI_PNP
	395	#define CONFIG_PCI_SCAN_SHOW
	396	#define CONFIG_PCIE_IMX
	397	#endif
	398
84e2dc0c EN	399	#define CONFIG_CMD_ELF
	400
	401	#define CONFIG_USB_GADGET
	402	#define CONFIG_CMD_USB_MASS_STORAGE
	403	#define CONFIG_USB_GADGET_MASS_STORAGE
	404	#define CONFIG_USBDOWNLOAD_GADGET
	405	#define CONFIG_USB_GADGET_VBUS_DRAW 2
	406
	407	/* Netchip IDs */
	408	#define CONFIG_G_DNL_VENDOR_NUM 0x0525
	409	#define CONFIG_G_DNL_PRODUCT_NUM 0xa4a5
	410	#define CONFIG_G_DNL_MANUFACTURER "Boundary"
	411
d67b0d97	412	#endif /* __CONFIG_H */