[thirdparty/u-boot.git] / include / configs / nitrogen6x.h

/*
 * Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
 *
 * Configuration settings for the Boundary Devices Nitrogen6X
 * and Freescale i.MX6Q Sabre Lite boards.
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __CONFIG_H
#define __CONFIG_H

#include "mx6_common.h"

#define CONFIG_MACH_TYPE	3769

/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN		(10 * 1024 * 1024)

#define CONFIG_MISC_INIT_R
#define CONFIG_USBD_HS
#define CONFIG_USB_ETHER
#define CONFIG_USB_ETH_CDC
#define CONFIG_NETCONSOLE

#define CONFIG_MXC_UART
#define CONFIG_MXC_UART_BASE	       UART2_BASE

#ifdef CONFIG_CMD_SF
#define CONFIG_MXC_SPI
#define CONFIG_SF_DEFAULT_BUS  0
#define CONFIG_SF_DEFAULT_CS   0
#define CONFIG_SF_DEFAULT_SPEED 25000000
#define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0)
#endif

/* I2C Configs */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
#define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
#define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
#define CONFIG_SYS_I2C_SPEED		100000
#define CONFIG_I2C_EDID

/* MMC Configs */
#define CONFIG_SYS_FSL_ESDHC_ADDR      0
#define CONFIG_SYS_FSL_USDHC_NUM       2

#ifdef CONFIG_MX6Q
#define CONFIG_CMD_SATA
#endif

/*
 * SATA Configs
 */
#ifdef CONFIG_CMD_SATA
#define CONFIG_DWC_AHSATA
#define CONFIG_SYS_SATA_MAX_DEVICE	1
#define CONFIG_DWC_AHSATA_PORT_ID	0
#define CONFIG_DWC_AHSATA_BASE_ADDR	SATA_ARB_BASE_ADDR
#define CONFIG_LBA48
#define CONFIG_LIBATA
#endif

#define CONFIG_FEC_MXC
#define CONFIG_MII
#define IMX_FEC_BASE			ENET_BASE_ADDR
#define CONFIG_FEC_XCV_TYPE		RGMII
#define CONFIG_ETHPRIME			"FEC"
#define CONFIG_FEC_MXC_PHYADDR		6
#define CONFIG_PHYLIB
#define CONFIG_PHY_MICREL
#define CONFIG_PHY_MICREL_KSZ9021

/* USB Configs */
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_MX6
#define CONFIG_USB_HOST_ETHER
#define CONFIG_USB_ETHER_ASIX
#define CONFIG_USB_ETHER_MCS7830
#define CONFIG_USB_ETHER_SMSC95XX
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET	/* For OTG port */
#define CONFIG_MXC_USB_PORTSC	(PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS	0
#define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP

/* Miscellaneous commands */
#define CONFIG_CMD_BMODE

/* Framebuffer and LCD */
#define CONFIG_VIDEO_IPUV3
#define CONFIG_VIDEO_BMP_RLE8
#define CONFIG_SPLASH_SCREEN
#define CONFIG_SPLASH_SCREEN_ALIGN
#define CONFIG_VIDEO_BMP_GZIP
#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (6 * 1024 * 1024)
#define CONFIG_BMP_16BPP
#define CONFIG_IPUV3_CLK 260000000
#define CONFIG_CMD_HDMIDETECT
#define CONFIG_IMX_HDMI
#define CONFIG_IMX_VIDEO_SKIP

#define CONFIG_PREBOOT                 ""

#ifdef CONFIG_CMD_SATA
#define CONFIG_DRIVE_SATA "sata "
#else
#define CONFIG_DRIVE_SATA
#endif

#ifdef CONFIG_CMD_MMC
#define CONFIG_DRIVE_MMC "mmc "
#else
#define CONFIG_DRIVE_MMC
#endif

#ifdef CONFIG_USB_STORAGE
#define CONFIG_DRIVE_USB "usb "
#else
#define CONFIG_DRIVE_USB
#endif

#define CONFIG_DRIVE_TYPES CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC CONFIG_DRIVE_USB
#define CONFIG_UMSDEVS CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC

#if defined(CONFIG_SABRELITE)
#define CONFIG_EXTRA_ENV_SETTINGS \
	"script=boot.scr\0" \
	"uimage=uImage\0" \
	"console=ttymxc1\0" \
	"fdt_high=0xffffffff\0" \
	"initrd_high=0xffffffff\0" \
	"fdt_file=imx6q-sabrelite.dtb\0" \
	"fdt_addr=0x18000000\0" \
	"boot_fdt=try\0" \
	"ip_dyn=yes\0" \
	"mmcdevs=0 1\0" \
	"mmcpart=1\0" \
	"mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
	"mmcargs=setenv bootargs console=${console},${baudrate} " \
		"root=${mmcroot}\0" \
	"loadbootscript=" \
		"load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
	"bootscript=echo Running bootscript from mmc ...; " \
		"source\0" \
	"loaduimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
	"loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
	"mmcboot=echo Booting from mmc ...; " \
		"run mmcargs; " \
		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
			"if run loadfdt; then " \
				"bootm ${loadaddr} - ${fdt_addr}; " \
			"else " \
				"if test ${boot_fdt} = try; then " \
					"bootm; " \
				"else " \
					"echo WARN: Cannot load the DT; " \
				"fi; " \
			"fi; " \
		"else " \
			"bootm; " \
		"fi;\0" \
	"netargs=setenv bootargs console=${console},${baudrate} " \
		"root=/dev/nfs " \
	"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
		"netboot=echo Booting from net ...; " \
		"run netargs; " \
		"if test ${ip_dyn} = yes; then " \
			"setenv get_cmd dhcp; " \
		"else " \
			"setenv get_cmd tftp; " \
		"fi; " \
		"${get_cmd} ${uimage}; " \
		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
			"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
				"bootm ${loadaddr} - ${fdt_addr}; " \
			"else " \
				"if test ${boot_fdt} = try; then " \
					"bootm; " \
				"else " \
					"echo WARN: Cannot load the DT; " \
				"fi; " \
			"fi; " \
		"else " \
			"bootm; " \
		"fi;\0"

#define CONFIG_BOOTCOMMAND \
	"for mmcdev in ${mmcdevs}; do " \
		"mmc dev ${mmcdev}; " \
		"if mmc rescan; then " \
			"if run loadbootscript; then " \
				"run bootscript; " \
			"else " \
				"if run loaduimage; then " \
					"run mmcboot; " \
				"fi; " \
			"fi; " \
		"fi; " \
	"done; " \
	"run netboot; "
#else
#define CONFIG_EXTRA_ENV_SETTINGS \
	"bootdevs=" CONFIG_DRIVE_TYPES "\0" \
	"umsdevs=" CONFIG_UMSDEVS "\0" \
	"console=ttymxc1\0" \
	"clearenv=if sf probe || sf probe || sf probe 1 ; then " \
		"sf erase 0xc0000 0x2000 && " \
		"echo restored environment to factory default ; fi\0" \
	"bootcmd=for dtype in ${bootdevs}" \
		"; do " \
			"if itest.s \"xusb\" == \"x${dtype}\" ; then " \
				"usb start ;" \
			"fi; " \
			"for disk in 0 1 ; do ${dtype} dev ${disk} ;" \
				"load " \
					"${dtype} ${disk}:1 " \
					"10008000 " \
					"/6x_bootscript" \
					"&& source 10008000 ; " \
			"done ; " \
		"done; " \
		"setenv stdout serial,vga ; " \
		"echo ; echo 6x_bootscript not found ; " \
		"echo ; echo serial console at 115200, 8N1 ; echo ; " \
		"echo details at http://boundarydevices.com/6q_bootscript ; " \
		"setenv stdout serial;" \
		"setenv stdin serial,usbkbd;" \
		"for dtype in ${umsdevs} ; do " \
			"if itest.s sata == ${dtype}; then " \
				"initcmd='sata init' ;" \
			"else " \
				"initcmd='mmc rescan' ;" \
			"fi; " \
			"for disk in 0 1 ; do " \
				"if $initcmd && $dtype dev $disk ; then " \
					"setenv stdout serial,vga; " \
					"echo expose ${dtype} ${disk} " \
						"over USB; " \
					"ums 0 $dtype $disk ;" \
				"fi; " \
		"	done; " \
		"done ;" \
		"setenv stdout serial,vga; " \
		"echo no block devices found;" \
		"\0" \
	"initrd_high=0xffffffff\0" \
	"upgradeu=for dtype in ${bootdevs}" \
		"; do " \
		"for disk in 0 1 ; do ${dtype} dev ${disk} ;" \
			"load ${dtype} ${disk}:1 10008000 " \
				"/6x_upgrade " \
				"&& source 10008000 ; " \
		"done ; " \
	"done\0" \

#endif
/* Miscellaneous configurable options */
#define CONFIG_SYS_MEMTEST_START       0x10000000
#define CONFIG_SYS_MEMTEST_END	       0x10010000
#define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000

/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS	       1
#define PHYS_SDRAM		       MMDC0_ARB_BASE_ADDR

#define CONFIG_SYS_SDRAM_BASE	       PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE

#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

/* Environment organization */
#define CONFIG_ENV_SIZE			(8 * 1024)

#if defined(CONFIG_SABRELITE)
#define CONFIG_ENV_IS_IN_MMC
#else
#define CONFIG_ENV_IS_IN_SPI_FLASH
#endif

#if defined(CONFIG_ENV_IS_IN_MMC)
#define CONFIG_ENV_OFFSET		(6 * 64 * 1024)
#define CONFIG_SYS_MMC_ENV_DEV		0
#elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
#define CONFIG_ENV_OFFSET		(768 * 1024)
#define CONFIG_ENV_SECT_SIZE		(8 * 1024)
#define CONFIG_ENV_SPI_BUS		CONFIG_SF_DEFAULT_BUS
#define CONFIG_ENV_SPI_CS		CONFIG_SF_DEFAULT_CS
#define CONFIG_ENV_SPI_MODE		CONFIG_SF_DEFAULT_MODE
#define CONFIG_ENV_SPI_MAX_HZ		CONFIG_SF_DEFAULT_SPEED
#endif

#define CONFIG_CMD_BMP

#define CONFIG_SYS_ALT_MEMTEST

/*
 * PCI express
 */
#ifdef CONFIG_CMD_PCI
#define CONFIG_PCI_SCAN_SHOW
#define CONFIG_PCIE_IMX
#endif

#define CONFIG_USB_FUNCTION_MASS_STORAGE

#define CONFIG_USB_FUNCTION_FASTBOOT
#define CONFIG_CMD_FASTBOOT
#define CONFIG_ANDROID_BOOT_IMAGE
#define CONFIG_FASTBOOT_BUF_ADDR   CONFIG_SYS_LOAD_ADDR
#define CONFIG_FASTBOOT_BUF_SIZE   0x07000000

#endif	       /* __CONFIG_H */
Commit	Line	Data
d67b0d97 EN	1	/*
	2	* Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
	3	*
	4	* Configuration settings for the Boundary Devices Nitrogen6X
	5	* and Freescale i.MX6Q Sabre Lite boards.
	6	*
1a459660	7	* SPDX-License-Identifier: GPL-2.0+
d67b0d97 EN	8	*/
	9
	10	#ifndef __CONFIG_H
	11	#define __CONFIG_H
	12
02824dc7	13	#include "mx6_common.h"
d67b0d97 EN	14
	15	#define CONFIG_MACH_TYPE 3769
	16
d67b0d97 EN	17	/* Size of malloc() pool */
	18	#define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024)
	19
d67b0d97	20	#define CONFIG_MISC_INIT_R
f3d7cff5	21	#define CONFIG_USBD_HS
f3d7cff5 TK	22	#define CONFIG_USB_ETHER
	23	#define CONFIG_USB_ETH_CDC
	24	#define CONFIG_NETCONSOLE
d67b0d97 EN	25
	26	#define CONFIG_MXC_UART
	27	#define CONFIG_MXC_UART_BASE UART2_BASE
	28
d67b0d97	29	#ifdef CONFIG_CMD_SF
d67b0d97 EN	30	#define CONFIG_MXC_SPI
d67b0d97 EN	31	#define CONFIG_SF_DEFAULT_BUS 0
155fa9af	32	#define CONFIG_SF_DEFAULT_CS 0
d67b0d97 EN	33	#define CONFIG_SF_DEFAULT_SPEED 25000000
	34	#define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0)
	35	#endif
	36
	37	/* I2C Configs */
b089d039	38	#define CONFIG_SYS_I2C
b089d039	39	#define CONFIG_SYS_I2C_MXC
03544c66 AA	40	#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
03544c66 AA	41	#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
f8cb101e	42	#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
d67b0d97	43	#define CONFIG_SYS_I2C_SPEED 100000
5dbdc3cf	44	#define CONFIG_I2C_EDID
d67b0d97	45
d67b0d97	46	/* MMC Configs */
d67b0d97 EN	47	#define CONFIG_SYS_FSL_ESDHC_ADDR 0
	48	#define CONFIG_SYS_FSL_USDHC_NUM 2
	49
d67b0d97 EN	50	#ifdef CONFIG_MX6Q
	51	#define CONFIG_CMD_SATA
	52	#endif
	53
	54	/*
	55	* SATA Configs
	56	*/
	57	#ifdef CONFIG_CMD_SATA
	58	#define CONFIG_DWC_AHSATA
	59	#define CONFIG_SYS_SATA_MAX_DEVICE 1
	60	#define CONFIG_DWC_AHSATA_PORT_ID 0
	61	#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR
	62	#define CONFIG_LBA48
	63	#define CONFIG_LIBATA
	64	#endif
	65
d67b0d97 EN	66	#define CONFIG_FEC_MXC
	67	#define CONFIG_MII
	68	#define IMX_FEC_BASE ENET_BASE_ADDR
	69	#define CONFIG_FEC_XCV_TYPE RGMII
	70	#define CONFIG_ETHPRIME "FEC"
	71	#define CONFIG_FEC_MXC_PHYADDR 6
	72	#define CONFIG_PHYLIB
	73	#define CONFIG_PHY_MICREL
	74	#define CONFIG_PHY_MICREL_KSZ9021
	75
	76	/* USB Configs */
d67b0d97 EN	77	#define CONFIG_USB_EHCI
d67b0d97 EN	78	#define CONFIG_USB_EHCI_MX6
d67b0d97 EN	79	#define CONFIG_USB_HOST_ETHER
d67b0d97 EN	80	#define CONFIG_USB_ETHER_ASIX
a743415f	81	#define CONFIG_USB_ETHER_MCS7830
d67b0d97	82	#define CONFIG_USB_ETHER_SMSC95XX
d1a52860 TK	83	#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
d1a52860 TK	84	#define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */
d67b0d97 EN	85	#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI \| PORT_PTS_PTW)
d67b0d97 EN	86	#define CONFIG_MXC_USB_FLAGS 0
c36c0008	87	#define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
d67b0d97 EN	88
	89	/* Miscellaneous commands */
	90	#define CONFIG_CMD_BMODE
d67b0d97 EN	91
d67b0d97 EN	92	/* Framebuffer and LCD */
d67b0d97	93	#define CONFIG_VIDEO_IPUV3
d67b0d97 EN	94	#define CONFIG_VIDEO_BMP_RLE8
d67b0d97 EN	95	#define CONFIG_SPLASH_SCREEN
761bc195 EN	96	#define CONFIG_SPLASH_SCREEN_ALIGN
	97	#define CONFIG_VIDEO_BMP_GZIP
	98	#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (6 * 1024 * 1024)
d67b0d97	99	#define CONFIG_BMP_16BPP
d67b0d97 EN	100	#define CONFIG_IPUV3_CLK 260000000
d67b0d97 EN	101	#define CONFIG_CMD_HDMIDETECT
5ea7f0e3	102	#define CONFIG_IMX_HDMI
a47e4495	103	#define CONFIG_IMX_VIDEO_SKIP
d67b0d97	104
d67b0d97 EN	105	#define CONFIG_PREBOOT ""
d67b0d97 EN	106
d67b0d97 EN	107	#ifdef CONFIG_CMD_SATA
	108	#define CONFIG_DRIVE_SATA "sata "
	109	#else
	110	#define CONFIG_DRIVE_SATA
	111	#endif
	112
	113	#ifdef CONFIG_CMD_MMC
	114	#define CONFIG_DRIVE_MMC "mmc "
	115	#else
	116	#define CONFIG_DRIVE_MMC
	117	#endif
	118
5b7103e0 DR	119	#ifdef CONFIG_USB_STORAGE
	120	#define CONFIG_DRIVE_USB "usb "
	121	#else
	122	#define CONFIG_DRIVE_USB
	123	#endif
	124
	125	#define CONFIG_DRIVE_TYPES CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC CONFIG_DRIVE_USB
8d97b3ad	126	#define CONFIG_UMSDEVS CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC
d67b0d97	127
f8b1e86d FE	128	#if defined(CONFIG_SABRELITE)
	129	#define CONFIG_EXTRA_ENV_SETTINGS \
	130	"script=boot.scr\0" \
	131	"uimage=uImage\0" \
	132	"console=ttymxc1\0" \
	133	"fdt_high=0xffffffff\0" \
	134	"initrd_high=0xffffffff\0" \
	135	"fdt_file=imx6q-sabrelite.dtb\0" \
6584a1b5	136	"fdt_addr=0x18000000\0" \
f8b1e86d FE	137	"boot_fdt=try\0" \
f8b1e86d FE	138	"ip_dyn=yes\0" \
05d1c245	139	"mmcdevs=0 1\0" \
f8b1e86d FE	140	"mmcpart=1\0" \
	141	"mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
	142	"mmcargs=setenv bootargs console=${console},${baudrate} " \
	143	"root=${mmcroot}\0" \
	144	"loadbootscript=" \
3ee96c7d	145	"load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
f8b1e86d FE	146	"bootscript=echo Running bootscript from mmc ...; " \
f8b1e86d FE	147	"source\0" \
3ee96c7d GG	148	"loaduimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
3ee96c7d GG	149	"loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
f8b1e86d FE	150	"mmcboot=echo Booting from mmc ...; " \
	151	"run mmcargs; " \
	152	"if test ${boot_fdt} = yes \|\| test ${boot_fdt} = try; then " \
	153	"if run loadfdt; then " \
	154	"bootm ${loadaddr} - ${fdt_addr}; " \
	155	"else " \
	156	"if test ${boot_fdt} = try; then " \
	157	"bootm; " \
	158	"else " \
	159	"echo WARN: Cannot load the DT; " \
	160	"fi; " \
	161	"fi; " \
	162	"else " \
	163	"bootm; " \
	164	"fi;\0" \
	165	"netargs=setenv bootargs console=${console},${baudrate} " \
	166	"root=/dev/nfs " \
	167	"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
	168	"netboot=echo Booting from net ...; " \
	169	"run netargs; " \
	170	"if test ${ip_dyn} = yes; then " \
	171	"setenv get_cmd dhcp; " \
	172	"else " \
	173	"setenv get_cmd tftp; " \
	174	"fi; " \
	175	"${get_cmd} ${uimage}; " \
	176	"if test ${boot_fdt} = yes \|\| test ${boot_fdt} = try; then " \
	177	"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
	178	"bootm ${loadaddr} - ${fdt_addr}; " \
	179	"else " \
	180	"if test ${boot_fdt} = try; then " \
	181	"bootm; " \
	182	"else " \
	183	"echo WARN: Cannot load the DT; " \
	184	"fi; " \
	185	"fi; " \
	186	"else " \
	187	"bootm; " \
	188	"fi;\0"
	189
	190	#define CONFIG_BOOTCOMMAND \
05d1c245 GG	191	"for mmcdev in ${mmcdevs}; do " \
	192	"mmc dev ${mmcdev}; " \
	193	"if mmc rescan; then " \
	194	"if run loadbootscript; then " \
	195	"run bootscript; " \
	196	"else " \
	197	"if run loaduimage; then " \
	198	"run mmcboot; " \
	199	"fi; " \
	200	"fi; " \
	201	"fi; " \
	202	"done; " \
	203	"run netboot; "
f8b1e86d	204	#else
d67b0d97	205	#define CONFIG_EXTRA_ENV_SETTINGS \
5b7103e0	206	"bootdevs=" CONFIG_DRIVE_TYPES "\0" \
8d97b3ad	207	"umsdevs=" CONFIG_UMSDEVS "\0" \
d67b0d97 EN	208	"console=ttymxc1\0" \
	209	"clearenv=if sf probe \|\| sf probe \|\| sf probe 1 ; then " \
	210	"sf erase 0xc0000 0x2000 && " \
	211	"echo restored environment to factory default ; fi\0" \
5b7103e0	212	"bootcmd=for dtype in ${bootdevs}" \
d67b0d97	213	"; do " \
5b7103e0 DR	214	"if itest.s \"xusb\" == \"x${dtype}\" ; then " \
	215	"usb start ;" \
	216	"fi; " \
d67b0d97	217	"for disk in 0 1 ; do ${dtype} dev ${disk} ;" \
43a3431c KM	218	"load " \
	219	"${dtype} ${disk}:1 " \
	220	"10008000 " \
	221	"/6x_bootscript" \
	222	"&& source 10008000 ; " \
d67b0d97 EN	223	"done ; " \
	224	"done; " \
	225	"setenv stdout serial,vga ; " \
	226	"echo ; echo 6x_bootscript not found ; " \
	227	"echo ; echo serial console at 115200, 8N1 ; echo ; " \
	228	"echo details at http://boundarydevices.com/6q_bootscript ; " \
8d97b3ad EN	229	"setenv stdout serial;" \
	230	"setenv stdin serial,usbkbd;" \
	231	"for dtype in ${umsdevs} ; do " \
	232	"if itest.s sata == ${dtype}; then " \
	233	"initcmd='sata init' ;" \
	234	"else " \
	235	"initcmd='mmc rescan' ;" \
	236	"fi; " \
	237	"for disk in 0 1 ; do " \
	238	"if $initcmd && $dtype dev $disk ; then " \
	239	"setenv stdout serial,vga; " \
	240	"echo expose ${dtype} ${disk} " \
	241	"over USB; " \
	242	"ums 0 $dtype $disk ;" \
	243	"fi; " \
	244	" done; " \
	245	"done ;" \
	246	"setenv stdout serial,vga; " \
	247	"echo no block devices found;" \
	248	"\0" \
8145ccc3	249	"initrd_high=0xffffffff\0" \
5b7103e0	250	"upgradeu=for dtype in ${bootdevs}" \
d67b0d97 EN	251	"; do " \
d67b0d97 EN	252	"for disk in 0 1 ; do ${dtype} dev ${disk} ;" \
43a3431c KM	253	"load ${dtype} ${disk}:1 10008000 " \
	254	"/6x_upgrade " \
	255	"&& source 10008000 ; " \
d67b0d97 EN	256	"done ; " \
	257	"done\0" \
	258
f8b1e86d	259	#endif
d67b0d97	260	/* Miscellaneous configurable options */
d67b0d97 EN	261	#define CONFIG_SYS_MEMTEST_START 0x10000000
	262	#define CONFIG_SYS_MEMTEST_END 0x10010000
	263	#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000
	264
d67b0d97 EN	265	/* Physical Memory Map */
	266	#define CONFIG_NR_DRAM_BANKS 1
	267	#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
	268
	269	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
	270	#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
	271	#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
	272
	273	#define CONFIG_SYS_INIT_SP_OFFSET \
	274	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
	275	#define CONFIG_SYS_INIT_SP_ADDR \
	276	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
	277
056845c2	278	/* Environment organization */
d67b0d97 EN	279	#define CONFIG_ENV_SIZE (8 * 1024)
d67b0d97 EN	280
f8b1e86d FE	281	#if defined(CONFIG_SABRELITE)
	282	#define CONFIG_ENV_IS_IN_MMC
	283	#else
d67b0d97	284	#define CONFIG_ENV_IS_IN_SPI_FLASH
f8b1e86d	285	#endif
d67b0d97 EN	286
	287	#if defined(CONFIG_ENV_IS_IN_MMC)
	288	#define CONFIG_ENV_OFFSET (6 * 64 * 1024)
	289	#define CONFIG_SYS_MMC_ENV_DEV 0
	290	#elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
	291	#define CONFIG_ENV_OFFSET (768 * 1024)
	292	#define CONFIG_ENV_SECT_SIZE (8 * 1024)
	293	#define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS
	294	#define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS
	295	#define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE
	296	#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
	297	#endif
	298
d67b0d97 EN	299	#define CONFIG_CMD_BMP
d67b0d97 EN	300
d67b0d97 EN	301	#define CONFIG_SYS_ALT_MEMTEST
d67b0d97 EN	302
147f8fa3 MV	303	/*
	304	* PCI express
	305	*/
147f8fa3	306	#ifdef CONFIG_CMD_PCI
147f8fa3 MV	307	#define CONFIG_PCI_SCAN_SHOW
	308	#define CONFIG_PCIE_IMX
	309	#endif
	310
01acd6ab	311	#define CONFIG_USB_FUNCTION_MASS_STORAGE
84e2dc0c	312
17da3c0c	313	#define CONFIG_USB_FUNCTION_FASTBOOT
e9feee63 EN	314	#define CONFIG_CMD_FASTBOOT
e9feee63 EN	315	#define CONFIG_ANDROID_BOOT_IMAGE
a588d99a PK	316	#define CONFIG_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR
a588d99a PK	317	#define CONFIG_FASTBOOT_BUF_SIZE 0x07000000
e9feee63	318
d67b0d97	319	#endif /* __CONFIG_H */