[people/ms/u-boot.git] / include / configs / nitrogen6x.h

/*
 * Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
 *
 * Configuration settings for the Boundary Devices Nitrogen6X
 * and Freescale i.MX6Q Sabre Lite boards.
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __CONFIG_H
#define __CONFIG_H

#include "mx6_common.h"
#define CONFIG_MX6
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO

#define CONFIG_MACH_TYPE	3769

#include <asm/arch/imx-regs.h>
#include <asm/imx-common/gpio.h>

#define CONFIG_CMDLINE_TAG
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG
#define CONFIG_REVISION_TAG
#define CONFIG_SYS_GENERIC_BOARD

/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN		(10 * 1024 * 1024)

#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_MISC_INIT_R
#define CONFIG_MXC_GPIO
#define CONFIG_CI_UDC
#define CONFIG_USBD_HS
#define CONFIG_USB_GADGET_DUALSPEED
#define CONFIG_USB_ETHER
#define CONFIG_USB_ETH_CDC
#define CONFIG_NETCONSOLE

#define CONFIG_CMD_FUSE
#ifdef CONFIG_CMD_FUSE
#define CONFIG_MXC_OCOTP
#endif

#define CONFIG_MXC_UART
#define CONFIG_MXC_UART_BASE	       UART2_BASE

#define CONFIG_CMD_SF
#ifdef CONFIG_CMD_SF
#define CONFIG_SPI_FLASH
#define CONFIG_SPI_FLASH_SST
#define CONFIG_MXC_SPI
#define CONFIG_SF_DEFAULT_BUS  0
#define CONFIG_SF_DEFAULT_CS   (0|(IMX_GPIO_NR(3, 19)<<8))
#define CONFIG_SF_DEFAULT_SPEED 25000000
#define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0)
#endif

/* I2C Configs */
#define CONFIG_CMD_I2C
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_SPEED		100000

/* MMC Configs */
#define CONFIG_FSL_ESDHC
#define CONFIG_FSL_USDHC
#define CONFIG_SYS_FSL_ESDHC_ADDR      0
#define CONFIG_SYS_FSL_USDHC_NUM       2

#define CONFIG_MMC
#define CONFIG_CMD_MMC
#define CONFIG_GENERIC_MMC
#define CONFIG_BOUNCE_BUFFER
#define CONFIG_CMD_EXT2
#define CONFIG_CMD_FAT
#define CONFIG_DOS_PARTITION

#ifdef CONFIG_MX6Q
#define CONFIG_CMD_SATA
#endif

/*
 * SATA Configs
 */
#ifdef CONFIG_CMD_SATA
#define CONFIG_DWC_AHSATA
#define CONFIG_SYS_SATA_MAX_DEVICE	1
#define CONFIG_DWC_AHSATA_PORT_ID	0
#define CONFIG_DWC_AHSATA_BASE_ADDR	SATA_ARB_BASE_ADDR
#define CONFIG_LBA48
#define CONFIG_LIBATA
#endif

#define CONFIG_CMD_PING
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_MII
#define CONFIG_CMD_NET
#define CONFIG_FEC_MXC
#define CONFIG_MII
#define IMX_FEC_BASE			ENET_BASE_ADDR
#define CONFIG_FEC_XCV_TYPE		RGMII
#define CONFIG_ETHPRIME			"FEC"
#define CONFIG_FEC_MXC_PHYADDR		6
#define CONFIG_PHYLIB
#define CONFIG_PHY_MICREL
#define CONFIG_PHY_MICREL_KSZ9021

/* USB Configs */
#define CONFIG_CMD_USB
#define CONFIG_CMD_FAT
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_MX6
#define CONFIG_USB_STORAGE
#define CONFIG_USB_HOST_ETHER
#define CONFIG_USB_ETHER_ASIX
#define CONFIG_USB_ETHER_MCS7830
#define CONFIG_USB_ETHER_SMSC95XX
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET	/* For OTG port */
#define CONFIG_MXC_USB_PORTSC	(PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS	0
#define CONFIG_USB_KEYBOARD
#define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP

/* Miscellaneous commands */
#define CONFIG_CMD_BMODE
#define CONFIG_CMD_SETEXPR

/* Framebuffer and LCD */
#define CONFIG_VIDEO
#define CONFIG_VIDEO_IPUV3
#define CONFIG_CFB_CONSOLE
#define CONFIG_VGA_AS_SINGLE_DEVICE
#define CONFIG_SYS_CONSOLE_IS_IN_ENV
#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
#define CONFIG_VIDEO_BMP_RLE8
#define CONFIG_SPLASH_SCREEN
#define CONFIG_BMP_16BPP
#define CONFIG_VIDEO_LOGO
#define CONFIG_IPUV3_CLK 260000000
#define CONFIG_CMD_HDMIDETECT
#define CONFIG_CONSOLE_MUX
#define CONFIG_IMX_HDMI
#define CONFIG_IMX_VIDEO_SKIP

/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_CONS_INDEX	       1
#define CONFIG_BAUDRATE			       115200

/* Command definition */
#include <config_cmd_default.h>

#undef CONFIG_CMD_IMLS

#define CONFIG_BOOTDELAY	       1

#define CONFIG_PREBOOT                 ""

#define CONFIG_LOADADDR			       0x12000000
#define CONFIG_SYS_TEXT_BASE	       0x17800000

#ifdef CONFIG_CMD_SATA
#define CONFIG_DRIVE_SATA "sata "
#else
#define CONFIG_DRIVE_SATA
#endif

#ifdef CONFIG_CMD_MMC
#define CONFIG_DRIVE_MMC "mmc "
#else
#define CONFIG_DRIVE_MMC
#endif

#ifdef CONFIG_USB_STORAGE
#define CONFIG_DRIVE_USB "usb "
#else
#define CONFIG_DRIVE_USB
#endif

#define CONFIG_DRIVE_TYPES CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC CONFIG_DRIVE_USB
#define CONFIG_UMSDEVS CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC

#if defined(CONFIG_SABRELITE)
#define CONFIG_EXTRA_ENV_SETTINGS \
	"script=boot.scr\0" \
	"uimage=uImage\0" \
	"console=ttymxc1\0" \
	"fdt_high=0xffffffff\0" \
	"initrd_high=0xffffffff\0" \
	"fdt_file=imx6q-sabrelite.dtb\0" \
	"fdt_addr=0x18000000\0" \
	"boot_fdt=try\0" \
	"ip_dyn=yes\0" \
	"mmcdevs=0 1\0" \
	"mmcpart=1\0" \
	"mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
	"mmcargs=setenv bootargs console=${console},${baudrate} " \
		"root=${mmcroot}\0" \
	"loadbootscript=" \
		"load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
	"bootscript=echo Running bootscript from mmc ...; " \
		"source\0" \
	"loaduimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
	"loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
	"mmcboot=echo Booting from mmc ...; " \
		"run mmcargs; " \
		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
			"if run loadfdt; then " \
				"bootm ${loadaddr} - ${fdt_addr}; " \
			"else " \
				"if test ${boot_fdt} = try; then " \
					"bootm; " \
				"else " \
					"echo WARN: Cannot load the DT; " \
				"fi; " \
			"fi; " \
		"else " \
			"bootm; " \
		"fi;\0" \
	"netargs=setenv bootargs console=${console},${baudrate} " \
		"root=/dev/nfs " \
	"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
		"netboot=echo Booting from net ...; " \
		"run netargs; " \
		"if test ${ip_dyn} = yes; then " \
			"setenv get_cmd dhcp; " \
		"else " \
			"setenv get_cmd tftp; " \
		"fi; " \
		"${get_cmd} ${uimage}; " \
		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
			"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
				"bootm ${loadaddr} - ${fdt_addr}; " \
			"else " \
				"if test ${boot_fdt} = try; then " \
					"bootm; " \
				"else " \
					"echo WARN: Cannot load the DT; " \
				"fi; " \
			"fi; " \
		"else " \
			"bootm; " \
		"fi;\0"

#define CONFIG_BOOTCOMMAND \
	"for mmcdev in ${mmcdevs}; do " \
		"mmc dev ${mmcdev}; " \
		"if mmc rescan; then " \
			"if run loadbootscript; then " \
				"run bootscript; " \
			"else " \
				"if run loaduimage; then " \
					"run mmcboot; " \
				"fi; " \
			"fi; " \
		"fi; " \
	"done; " \
	"run netboot; "
#else
#define CONFIG_EXTRA_ENV_SETTINGS \
	"bootdevs=" CONFIG_DRIVE_TYPES "\0" \
	"umsdevs=" CONFIG_UMSDEVS "\0" \
	"console=ttymxc1\0" \
	"clearenv=if sf probe || sf probe || sf probe 1 ; then " \
		"sf erase 0xc0000 0x2000 && " \
		"echo restored environment to factory default ; fi\0" \
	"bootcmd=for dtype in ${bootdevs}" \
		"; do " \
			"if itest.s \"xusb\" == \"x${dtype}\" ; then " \
				"usb start ;" \
			"fi; " \
			"for disk in 0 1 ; do ${dtype} dev ${disk} ;" \
				"load " \
					"${dtype} ${disk}:1 " \
					"10008000 " \
					"/6x_bootscript" \
					"&& source 10008000 ; " \
			"done ; " \
		"done; " \
		"setenv stdout serial,vga ; " \
		"echo ; echo 6x_bootscript not found ; " \
		"echo ; echo serial console at 115200, 8N1 ; echo ; " \
		"echo details at http://boundarydevices.com/6q_bootscript ; " \
		"setenv stdout serial;" \
		"setenv stdin serial,usbkbd;" \
		"for dtype in ${umsdevs} ; do " \
			"if itest.s sata == ${dtype}; then " \
				"initcmd='sata init' ;" \
			"else " \
				"initcmd='mmc rescan' ;" \
			"fi; " \
			"for disk in 0 1 ; do " \
				"if $initcmd && $dtype dev $disk ; then " \
					"setenv stdout serial,vga; " \
					"echo expose ${dtype} ${disk} " \
						"over USB; " \
					"ums 0 $dtype $disk ;" \
				"fi; " \
		"	done; " \
		"done ;" \
		"setenv stdout serial,vga; " \
		"echo no block devices found;" \
		"\0" \
	"initrd_high=0xffffffff\0" \
	"upgradeu=for dtype in ${bootdevs}" \
		"; do " \
		"for disk in 0 1 ; do ${dtype} dev ${disk} ;" \
			"load ${dtype} ${disk}:1 10008000 " \
				"/6x_upgrade " \
				"&& source 10008000 ; " \
		"done ; " \
	"done\0" \

#endif
/* Miscellaneous configurable options */
#define CONFIG_SYS_LONGHELP
#define CONFIG_SYS_HUSH_PARSER
#define CONFIG_SYS_PROMPT	       "U-Boot > "
#define CONFIG_AUTO_COMPLETE
#define CONFIG_SYS_CBSIZE	       1024

/* Print Buffer Size */
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
#define CONFIG_SYS_MAXARGS	       16
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE

#define CONFIG_SYS_MEMTEST_START       0x10000000
#define CONFIG_SYS_MEMTEST_END	       0x10010000
#define CONFIG_SYS_MEMTEST_SCRATCH     0x10800000

#define CONFIG_SYS_LOAD_ADDR	       CONFIG_LOADADDR

#define CONFIG_CMDLINE_EDITING

/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS	       1
#define PHYS_SDRAM		       MMDC0_ARB_BASE_ADDR

#define CONFIG_SYS_SDRAM_BASE	       PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE

#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

/* FLASH and environment organization */
#define CONFIG_SYS_NO_FLASH

#define CONFIG_ENV_SIZE			(8 * 1024)

#if defined(CONFIG_SABRELITE)
#define CONFIG_ENV_IS_IN_MMC
#else
#define CONFIG_ENV_IS_IN_SPI_FLASH
#endif

#if defined(CONFIG_ENV_IS_IN_MMC)
#define CONFIG_ENV_OFFSET		(6 * 64 * 1024)
#define CONFIG_SYS_MMC_ENV_DEV		0
#elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
#define CONFIG_ENV_OFFSET		(768 * 1024)
#define CONFIG_ENV_SECT_SIZE		(8 * 1024)
#define CONFIG_ENV_SPI_BUS		CONFIG_SF_DEFAULT_BUS
#define CONFIG_ENV_SPI_CS		CONFIG_SF_DEFAULT_CS
#define CONFIG_ENV_SPI_MODE		CONFIG_SF_DEFAULT_MODE
#define CONFIG_ENV_SPI_MAX_HZ		CONFIG_SF_DEFAULT_SPEED
#endif

#define CONFIG_OF_LIBFDT
#define CONFIG_CMD_BOOTZ

#ifndef CONFIG_SYS_DCACHE_OFF
#define CONFIG_CMD_CACHE
#endif

#define CONFIG_CMD_BMP

#define CONFIG_CMD_TIME
#define CONFIG_SYS_ALT_MEMTEST

#define CONFIG_CMD_BOOTZ
#define CONFIG_SUPPORT_RAW_INITRD
#define CONFIG_CMD_FS_GENERIC

/*
 * PCI express
 */
#ifdef CONFIG_CMD_PCI
#define CONFIG_PCI
#define CONFIG_PCI_PNP
#define CONFIG_PCI_SCAN_SHOW
#define CONFIG_PCIE_IMX
#endif

#define CONFIG_CMD_ELF

#define CONFIG_USB_GADGET
#define CONFIG_CMD_USB_MASS_STORAGE
#define CONFIG_USB_GADGET_MASS_STORAGE
#define CONFIG_USBDOWNLOAD_GADGET
#define CONFIG_USB_GADGET_VBUS_DRAW	2

/* Netchip IDs */
#define CONFIG_G_DNL_VENDOR_NUM 0x0525
#define CONFIG_G_DNL_PRODUCT_NUM 0xa4a5
#define CONFIG_G_DNL_MANUFACTURER "Boundary"

#endif	       /* __CONFIG_H */
Commit	Line	Data
d67b0d97 EN	1	/*
	2	* Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
	3	*
	4	* Configuration settings for the Boundary Devices Nitrogen6X
	5	* and Freescale i.MX6Q Sabre Lite boards.
	6	*
1a459660	7	* SPDX-License-Identifier: GPL-2.0+
d67b0d97 EN	8	*/
	9
	10	#ifndef __CONFIG_H
	11	#define __CONFIG_H
	12
02824dc7	13	#include "mx6_common.h"
d67b0d97 EN	14	#define CONFIG_MX6
	15	#define CONFIG_DISPLAY_CPUINFO
	16	#define CONFIG_DISPLAY_BOARDINFO
	17
	18	#define CONFIG_MACH_TYPE 3769
	19
	20	#include <asm/arch/imx-regs.h>
	21	#include <asm/imx-common/gpio.h>
	22
	23	#define CONFIG_CMDLINE_TAG
	24	#define CONFIG_SETUP_MEMORY_TAGS
	25	#define CONFIG_INITRD_TAG
	26	#define CONFIG_REVISION_TAG
f7155fa3	27	#define CONFIG_SYS_GENERIC_BOARD
d67b0d97 EN	28
	29	/* Size of malloc() pool */
	30	#define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024)
	31
	32	#define CONFIG_BOARD_EARLY_INIT_F
	33	#define CONFIG_MISC_INIT_R
	34	#define CONFIG_MXC_GPIO
f016f8ca	35	#define CONFIG_CI_UDC
f3d7cff5 TK	36	#define CONFIG_USBD_HS
	37	#define CONFIG_USB_GADGET_DUALSPEED
	38	#define CONFIG_USB_ETHER
	39	#define CONFIG_USB_ETH_CDC
	40	#define CONFIG_NETCONSOLE
d67b0d97	41
70a5ef21 BT	42	#define CONFIG_CMD_FUSE
	43	#ifdef CONFIG_CMD_FUSE
	44	#define CONFIG_MXC_OCOTP
	45	#endif
	46
d67b0d97 EN	47	#define CONFIG_MXC_UART
	48	#define CONFIG_MXC_UART_BASE UART2_BASE
	49
	50	#define CONFIG_CMD_SF
	51	#ifdef CONFIG_CMD_SF
	52	#define CONFIG_SPI_FLASH
	53	#define CONFIG_SPI_FLASH_SST
	54	#define CONFIG_MXC_SPI
	55	#define CONFIG_SF_DEFAULT_BUS 0
	56	#define CONFIG_SF_DEFAULT_CS (0\|(IMX_GPIO_NR(3, 19)<<8))
	57	#define CONFIG_SF_DEFAULT_SPEED 25000000
	58	#define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0)
	59	#endif
	60
	61	/* I2C Configs */
	62	#define CONFIG_CMD_I2C
b089d039	63	#define CONFIG_SYS_I2C
b089d039	64	#define CONFIG_SYS_I2C_MXC
d67b0d97 EN	65	#define CONFIG_SYS_I2C_SPEED 100000
d67b0d97 EN	66
d67b0d97 EN	67	/* MMC Configs */
	68	#define CONFIG_FSL_ESDHC
	69	#define CONFIG_FSL_USDHC
	70	#define CONFIG_SYS_FSL_ESDHC_ADDR 0
	71	#define CONFIG_SYS_FSL_USDHC_NUM 2
	72
	73	#define CONFIG_MMC
	74	#define CONFIG_CMD_MMC
	75	#define CONFIG_GENERIC_MMC
	76	#define CONFIG_BOUNCE_BUFFER
	77	#define CONFIG_CMD_EXT2
	78	#define CONFIG_CMD_FAT
	79	#define CONFIG_DOS_PARTITION
	80
	81	#ifdef CONFIG_MX6Q
	82	#define CONFIG_CMD_SATA
	83	#endif
	84
	85	/*
	86	* SATA Configs
	87	*/
	88	#ifdef CONFIG_CMD_SATA
	89	#define CONFIG_DWC_AHSATA
	90	#define CONFIG_SYS_SATA_MAX_DEVICE 1
	91	#define CONFIG_DWC_AHSATA_PORT_ID 0
	92	#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_ARB_BASE_ADDR
	93	#define CONFIG_LBA48
	94	#define CONFIG_LIBATA
	95	#endif
	96
	97	#define CONFIG_CMD_PING
	98	#define CONFIG_CMD_DHCP
	99	#define CONFIG_CMD_MII
	100	#define CONFIG_CMD_NET
	101	#define CONFIG_FEC_MXC
	102	#define CONFIG_MII
	103	#define IMX_FEC_BASE ENET_BASE_ADDR
	104	#define CONFIG_FEC_XCV_TYPE RGMII
	105	#define CONFIG_ETHPRIME "FEC"
	106	#define CONFIG_FEC_MXC_PHYADDR 6
	107	#define CONFIG_PHYLIB
	108	#define CONFIG_PHY_MICREL
	109	#define CONFIG_PHY_MICREL_KSZ9021
	110
	111	/* USB Configs */
	112	#define CONFIG_CMD_USB
	113	#define CONFIG_CMD_FAT
	114	#define CONFIG_USB_EHCI
	115	#define CONFIG_USB_EHCI_MX6
	116	#define CONFIG_USB_STORAGE
	117	#define CONFIG_USB_HOST_ETHER
	118	#define CONFIG_USB_ETHER_ASIX
a743415f	119	#define CONFIG_USB_ETHER_MCS7830
d67b0d97	120	#define CONFIG_USB_ETHER_SMSC95XX
d1a52860 TK	121	#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
d1a52860 TK	122	#define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */
d67b0d97 EN	123	#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI \| PORT_PTS_PTW)
d67b0d97 EN	124	#define CONFIG_MXC_USB_FLAGS 0
c36c0008 EN	125	#define CONFIG_USB_KEYBOARD
c36c0008 EN	126	#define CONFIG_SYS_USB_EVENT_POLL_VIA_CONTROL_EP
d67b0d97 EN	127
	128	/* Miscellaneous commands */
	129	#define CONFIG_CMD_BMODE
	130	#define CONFIG_CMD_SETEXPR
	131
	132	/* Framebuffer and LCD */
	133	#define CONFIG_VIDEO
	134	#define CONFIG_VIDEO_IPUV3
	135	#define CONFIG_CFB_CONSOLE
	136	#define CONFIG_VGA_AS_SINGLE_DEVICE
	137	#define CONFIG_SYS_CONSOLE_IS_IN_ENV
	138	#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
	139	#define CONFIG_VIDEO_BMP_RLE8
	140	#define CONFIG_SPLASH_SCREEN
	141	#define CONFIG_BMP_16BPP
	142	#define CONFIG_VIDEO_LOGO
	143	#define CONFIG_IPUV3_CLK 260000000
	144	#define CONFIG_CMD_HDMIDETECT
	145	#define CONFIG_CONSOLE_MUX
5ea7f0e3	146	#define CONFIG_IMX_HDMI
a47e4495	147	#define CONFIG_IMX_VIDEO_SKIP
d67b0d97 EN	148
	149	/* allow to overwrite serial and ethaddr */
	150	#define CONFIG_ENV_OVERWRITE
	151	#define CONFIG_CONS_INDEX 1
	152	#define CONFIG_BAUDRATE 115200
	153
	154	/* Command definition */
	155	#include <config_cmd_default.h>
	156
	157	#undef CONFIG_CMD_IMLS
	158
	159	#define CONFIG_BOOTDELAY 1
	160
	161	#define CONFIG_PREBOOT ""
	162
	163	#define CONFIG_LOADADDR 0x12000000
	164	#define CONFIG_SYS_TEXT_BASE 0x17800000
	165
	166	#ifdef CONFIG_CMD_SATA
	167	#define CONFIG_DRIVE_SATA "sata "
	168	#else
	169	#define CONFIG_DRIVE_SATA
	170	#endif
	171
	172	#ifdef CONFIG_CMD_MMC
	173	#define CONFIG_DRIVE_MMC "mmc "
	174	#else
	175	#define CONFIG_DRIVE_MMC
	176	#endif
	177
5b7103e0 DR	178	#ifdef CONFIG_USB_STORAGE
	179	#define CONFIG_DRIVE_USB "usb "
	180	#else
	181	#define CONFIG_DRIVE_USB
	182	#endif
	183
	184	#define CONFIG_DRIVE_TYPES CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC CONFIG_DRIVE_USB
8d97b3ad	185	#define CONFIG_UMSDEVS CONFIG_DRIVE_SATA CONFIG_DRIVE_MMC
d67b0d97	186
f8b1e86d FE	187	#if defined(CONFIG_SABRELITE)
	188	#define CONFIG_EXTRA_ENV_SETTINGS \
	189	"script=boot.scr\0" \
	190	"uimage=uImage\0" \
	191	"console=ttymxc1\0" \
	192	"fdt_high=0xffffffff\0" \
	193	"initrd_high=0xffffffff\0" \
	194	"fdt_file=imx6q-sabrelite.dtb\0" \
6584a1b5	195	"fdt_addr=0x18000000\0" \
f8b1e86d FE	196	"boot_fdt=try\0" \
f8b1e86d FE	197	"ip_dyn=yes\0" \
05d1c245	198	"mmcdevs=0 1\0" \
f8b1e86d FE	199	"mmcpart=1\0" \
	200	"mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
	201	"mmcargs=setenv bootargs console=${console},${baudrate} " \
	202	"root=${mmcroot}\0" \
	203	"loadbootscript=" \
3ee96c7d	204	"load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
f8b1e86d FE	205	"bootscript=echo Running bootscript from mmc ...; " \
f8b1e86d FE	206	"source\0" \
3ee96c7d GG	207	"loaduimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
3ee96c7d GG	208	"loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
f8b1e86d FE	209	"mmcboot=echo Booting from mmc ...; " \
	210	"run mmcargs; " \
	211	"if test ${boot_fdt} = yes \|\| test ${boot_fdt} = try; then " \
	212	"if run loadfdt; then " \
	213	"bootm ${loadaddr} - ${fdt_addr}; " \
	214	"else " \
	215	"if test ${boot_fdt} = try; then " \
	216	"bootm; " \
	217	"else " \
	218	"echo WARN: Cannot load the DT; " \
	219	"fi; " \
	220	"fi; " \
	221	"else " \
	222	"bootm; " \
	223	"fi;\0" \
	224	"netargs=setenv bootargs console=${console},${baudrate} " \
	225	"root=/dev/nfs " \
	226	"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
	227	"netboot=echo Booting from net ...; " \
	228	"run netargs; " \
	229	"if test ${ip_dyn} = yes; then " \
	230	"setenv get_cmd dhcp; " \
	231	"else " \
	232	"setenv get_cmd tftp; " \
	233	"fi; " \
	234	"${get_cmd} ${uimage}; " \
	235	"if test ${boot_fdt} = yes \|\| test ${boot_fdt} = try; then " \
	236	"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
	237	"bootm ${loadaddr} - ${fdt_addr}; " \
	238	"else " \
	239	"if test ${boot_fdt} = try; then " \
	240	"bootm; " \
	241	"else " \
	242	"echo WARN: Cannot load the DT; " \
	243	"fi; " \
	244	"fi; " \
	245	"else " \
	246	"bootm; " \
	247	"fi;\0"
	248
	249	#define CONFIG_BOOTCOMMAND \
05d1c245 GG	250	"for mmcdev in ${mmcdevs}; do " \
	251	"mmc dev ${mmcdev}; " \
	252	"if mmc rescan; then " \
	253	"if run loadbootscript; then " \
	254	"run bootscript; " \
	255	"else " \
	256	"if run loaduimage; then " \
	257	"run mmcboot; " \
	258	"fi; " \
	259	"fi; " \
	260	"fi; " \
	261	"done; " \
	262	"run netboot; "
f8b1e86d	263	#else
d67b0d97	264	#define CONFIG_EXTRA_ENV_SETTINGS \
5b7103e0	265	"bootdevs=" CONFIG_DRIVE_TYPES "\0" \
8d97b3ad	266	"umsdevs=" CONFIG_UMSDEVS "\0" \
d67b0d97 EN	267	"console=ttymxc1\0" \
	268	"clearenv=if sf probe \|\| sf probe \|\| sf probe 1 ; then " \
	269	"sf erase 0xc0000 0x2000 && " \
	270	"echo restored environment to factory default ; fi\0" \
5b7103e0	271	"bootcmd=for dtype in ${bootdevs}" \
d67b0d97	272	"; do " \
5b7103e0 DR	273	"if itest.s \"xusb\" == \"x${dtype}\" ; then " \
	274	"usb start ;" \
	275	"fi; " \
d67b0d97	276	"for disk in 0 1 ; do ${dtype} dev ${disk} ;" \
43a3431c KM	277	"load " \
	278	"${dtype} ${disk}:1 " \
	279	"10008000 " \
	280	"/6x_bootscript" \
	281	"&& source 10008000 ; " \
d67b0d97 EN	282	"done ; " \
	283	"done; " \
	284	"setenv stdout serial,vga ; " \
	285	"echo ; echo 6x_bootscript not found ; " \
	286	"echo ; echo serial console at 115200, 8N1 ; echo ; " \
	287	"echo details at http://boundarydevices.com/6q_bootscript ; " \
8d97b3ad EN	288	"setenv stdout serial;" \
	289	"setenv stdin serial,usbkbd;" \
	290	"for dtype in ${umsdevs} ; do " \
	291	"if itest.s sata == ${dtype}; then " \
	292	"initcmd='sata init' ;" \
	293	"else " \
	294	"initcmd='mmc rescan' ;" \
	295	"fi; " \
	296	"for disk in 0 1 ; do " \
	297	"if $initcmd && $dtype dev $disk ; then " \
	298	"setenv stdout serial,vga; " \
	299	"echo expose ${dtype} ${disk} " \
	300	"over USB; " \
	301	"ums 0 $dtype $disk ;" \
	302	"fi; " \
	303	" done; " \
	304	"done ;" \
	305	"setenv stdout serial,vga; " \
	306	"echo no block devices found;" \
	307	"\0" \
8145ccc3	308	"initrd_high=0xffffffff\0" \
5b7103e0	309	"upgradeu=for dtype in ${bootdevs}" \
d67b0d97 EN	310	"; do " \
d67b0d97 EN	311	"for disk in 0 1 ; do ${dtype} dev ${disk} ;" \
43a3431c KM	312	"load ${dtype} ${disk}:1 10008000 " \
	313	"/6x_upgrade " \
	314	"&& source 10008000 ; " \
d67b0d97 EN	315	"done ; " \
	316	"done\0" \
	317
f8b1e86d	318	#endif
d67b0d97 EN	319	/* Miscellaneous configurable options */
	320	#define CONFIG_SYS_LONGHELP
	321	#define CONFIG_SYS_HUSH_PARSER
	322	#define CONFIG_SYS_PROMPT "U-Boot > "
	323	#define CONFIG_AUTO_COMPLETE
	324	#define CONFIG_SYS_CBSIZE 1024
	325
	326	/* Print Buffer Size */
	327	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
	328	#define CONFIG_SYS_MAXARGS 16
	329	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
	330
	331	#define CONFIG_SYS_MEMTEST_START 0x10000000
	332	#define CONFIG_SYS_MEMTEST_END 0x10010000
	333	#define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000
	334
	335	#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
d67b0d97 EN	336
	337	#define CONFIG_CMDLINE_EDITING
	338
	339	/* Physical Memory Map */
	340	#define CONFIG_NR_DRAM_BANKS 1
	341	#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
	342
	343	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
	344	#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
	345	#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
	346
	347	#define CONFIG_SYS_INIT_SP_OFFSET \
	348	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
	349	#define CONFIG_SYS_INIT_SP_ADDR \
	350	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
	351
	352	/* FLASH and environment organization */
	353	#define CONFIG_SYS_NO_FLASH
	354
	355	#define CONFIG_ENV_SIZE (8 * 1024)
	356
f8b1e86d FE	357	#if defined(CONFIG_SABRELITE)
	358	#define CONFIG_ENV_IS_IN_MMC
	359	#else
d67b0d97	360	#define CONFIG_ENV_IS_IN_SPI_FLASH
f8b1e86d	361	#endif
d67b0d97 EN	362
	363	#if defined(CONFIG_ENV_IS_IN_MMC)
	364	#define CONFIG_ENV_OFFSET (6 * 64 * 1024)
	365	#define CONFIG_SYS_MMC_ENV_DEV 0
	366	#elif defined(CONFIG_ENV_IS_IN_SPI_FLASH)
	367	#define CONFIG_ENV_OFFSET (768 * 1024)
	368	#define CONFIG_ENV_SECT_SIZE (8 * 1024)
	369	#define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS
	370	#define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS
	371	#define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE
	372	#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
	373	#endif
	374
	375	#define CONFIG_OF_LIBFDT
	376	#define CONFIG_CMD_BOOTZ
	377
d67b0d97 EN	378	#ifndef CONFIG_SYS_DCACHE_OFF
	379	#define CONFIG_CMD_CACHE
	380	#endif
	381
	382	#define CONFIG_CMD_BMP
	383
	384	#define CONFIG_CMD_TIME
	385	#define CONFIG_SYS_ALT_MEMTEST
	386
9b9ba6f0	387	#define CONFIG_CMD_BOOTZ
36558295	388	#define CONFIG_SUPPORT_RAW_INITRD
262326b4	389	#define CONFIG_CMD_FS_GENERIC
9b9ba6f0	390
147f8fa3 MV	391	/*
	392	* PCI express
	393	*/
147f8fa3 MV	394	#ifdef CONFIG_CMD_PCI
	395	#define CONFIG_PCI
	396	#define CONFIG_PCI_PNP
	397	#define CONFIG_PCI_SCAN_SHOW
	398	#define CONFIG_PCIE_IMX
	399	#endif
	400
84e2dc0c EN	401	#define CONFIG_CMD_ELF
	402
	403	#define CONFIG_USB_GADGET
	404	#define CONFIG_CMD_USB_MASS_STORAGE
	405	#define CONFIG_USB_GADGET_MASS_STORAGE
	406	#define CONFIG_USBDOWNLOAD_GADGET
	407	#define CONFIG_USB_GADGET_VBUS_DRAW 2
	408
	409	/* Netchip IDs */
	410	#define CONFIG_G_DNL_VENDOR_NUM 0x0525
	411	#define CONFIG_G_DNL_PRODUCT_NUM 0xa4a5
	412	#define CONFIG_G_DNL_MANUFACTURER "Boundary"
	413
d67b0d97	414	#endif /* __CONFIG_H */