[people/ms/u-boot.git] / include / configs / nokia_rx51.h

/*
 * (C) Copyright 2011-2012
 * Pali Rohár <pali.rohar@gmail.com>
 *
 * (C) Copyright 2010
 * Alistair Buxton <a.j.buxton@gmail.com>
 *
 * Derived from Beagle Board code:
 * (C) Copyright 2006-2008
 * Texas Instruments.
 * Richard Woodruff <r-woodruff2@ti.com>
 * Syed Mohammed Khasim <x0khasim@ti.com>
 *
 * Configuration settings for the Nokia RX-51 aka N900.
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __CONFIG_H
#define __CONFIG_H

/*
 * High Level Configuration Options
 */

#define CONFIG_OMAP			/* in a TI OMAP core */
#define CONFIG_OMAP3430			/* which is in a 3430 */
#define CONFIG_OMAP3_RX51		/* working with RX51 */
#define CONFIG_SYS_L2CACHE_OFF		/* pretend there is no L2 CACHE */
#define CONFIG_OMAP_COMMON

#define CONFIG_MACH_TYPE		MACH_TYPE_NOKIA_RX51

/*
 * Nokia X-Loader loading secondary image to address 0x80400000
 * NOLO loading boot image to random place, so it doesn't really
 * matter what we set this to. We have to copy u-boot to this address
 */
#define CONFIG_SYS_TEXT_BASE	0x80008000

#define CONFIG_SDRC			/* The chip has SDRC controller */

#include <asm/arch/cpu.h>		/* get chip and board defs */
#include <asm/arch/omap3.h>
#include <asm/arch/mem.h>
#include <linux/stringify.h>

/*
 * Display CPU and Board information
 */
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO

/* Clock Defines */
#define V_OSCK			26000000	/* Clock output from T2 */
#define V_SCLK			(V_OSCK >> 1)

#undef CONFIG_USE_IRQ				/* no support for IRQs */
#define CONFIG_MISC_INIT_R
#define CONFIG_SKIP_LOWLEVEL_INIT		/* X-Loader set everything up */

#define CONFIG_CMDLINE_TAG	/* enable passing kernel command line string */
#define CONFIG_INITRD_TAG			/* enable passing initrd */
#define CONFIG_REVISION_TAG			/* enable passing revision tag*/
#define CONFIG_SETUP_MEMORY_TAGS		/* enable memory tag */

/*
 * Size of malloc() pool
 */
#define CONFIG_ENV_SIZE			(128 << 10)
#define CONFIG_UBI_SIZE			(512 << 10)
#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + CONFIG_UBI_SIZE + \
					(128 << 10))

/*
 * Hardware drivers
 */

/*
 * NS16550 Configuration
 */
#define V_NS16550_CLK		48000000		/* 48MHz (APLL96/2) */

#define CONFIG_SYS_NS16550
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE	(-4)
#define CONFIG_SYS_NS16550_CLK		V_NS16550_CLK

/*
 * select serial console configuration
 */
#define CONFIG_CONS_INDEX		3
#define CONFIG_SYS_NS16550_COM3		OMAP34XX_UART3
#define CONFIG_SERIAL3			3		/* UART3 on RX-51 */

/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_BAUDRATE			115200
#define CONFIG_SYS_BAUDRATE_TABLE { 4800, 9600, 19200, 38400, 57600, 115200 }
#define CONFIG_MMC
#define CONFIG_GENERIC_MMC
#define CONFIG_OMAP_HSMMC
#define CONFIG_DOS_PARTITION

/* USB */
#define CONFIG_MUSB_UDC
#define CONFIG_MUSB_HDC
#define CONFIG_USB_OMAP3
#define CONFIG_TWL4030_USB

/* USB device configuration */
#define CONFIG_USB_DEVICE
#define CONFIG_USBD_VENDORID		0x0421
#define CONFIG_USBD_PRODUCTID		0x01c8
#define CONFIG_USBD_MANUFACTURER	"Nokia"
#define CONFIG_USBD_PRODUCT_NAME	"N900"

#define CONFIG_SYS_CONSOLE_IS_IN_ENV
#define CONFIG_SYS_NO_FLASH

/* commands to include */
#include <config_cmd_default.h>

#define CONFIG_CMD_EXT2			/* EXT2 Support */
#define CONFIG_CMD_EXT4			/* EXT4 Support */
#define CONFIG_CMD_FAT			/* FAT support */

#define CONFIG_CMD_I2C			/* I2C serial bus support */
#define CONFIG_CMD_MMC			/* MMC support */
#define CONFIG_CMD_GPIO			/* Enable gpio command */

#define CONFIG_CMDLINE_EDITING		/* add command line history */
#define CONFIG_AUTO_COMPLETE		/* add autocompletion support */

#define CONFIG_CMD_BOOTMENU		/* ANSI terminal Boot Menu */
#define CONFIG_CMD_CLEAR		/* ANSI terminal clear screen command */

#ifdef ONENAND_SUPPORT

#define CONFIG_CMD_ONENAND		/* ONENAND support */
#define CONFIG_CMD_MTDPARTS		/* mtd parts support */

#ifdef UBIFS_SUPPORT
#define CONFIG_CMD_UBI			/* UBI Support */
#define CONFIG_CMD_UBIFS		/* UBIFS Support */
#endif

#endif

/* commands not needed from config_cmd_default.h */
#undef CONFIG_CMD_FPGA			/* FPGA configuration Support */
#undef CONFIG_CMD_IMI			/* iminfo */
#undef CONFIG_CMD_NET			/* bootp, tftpboot, rarpboot */
#undef CONFIG_CMD_NFS			/* NFS support */
#undef CONFIG_CMD_SAVEENV		/* saveenv */
#undef CONFIG_CMD_SETGETDCR		/* DCR support on 4xx */

#define CONFIG_OMAP3_SPI
#define CONFIG_SYS_I2C
#define CONFIG_SYS_OMAP24_I2C_SPEED	100000
#define CONFIG_SYS_OMAP24_I2C_SLAVE	1
#define CONFIG_SYS_I2C_OMAP34XX

/*
 * TWL4030
 */
#define CONFIG_TWL4030_POWER
#define CONFIG_TWL4030_LED
#define CONFIG_TWL4030_KEYPAD

#define CONFIG_OMAP_GPIO
#define GPIO_SLIDE			71

/*
 * Board ONENAND Info.
 */

#define PART1_NAME			"bootloader"
#define PART1_SIZE			128
#define PART1_MULL			1024
#define PART1_SUFF			"k"
#define PART1_OFFS			0x00000000
#define PART1_MASK			0x00000003

#define PART2_NAME			"config"
#define PART2_SIZE			384
#define PART2_MULL			1024
#define PART2_SUFF			"k"
#define PART2_OFFS			0x00020000
#define PART2_MASK			0x00000000

#define PART3_NAME			"log"
#define PART3_SIZE			256
#define PART3_MULL			1024
#define PART3_SUFF			"k"
#define PART3_OFFS			0x00080000
#define PART3_MASK			0x00000000

#define PART4_NAME			"kernel"
#define PART4_SIZE			2
#define PART4_MULL			1024*1024
#define PART4_SUFF			"m"
#define PART4_OFFS			0x000c0000
#define PART4_MASK			0x00000000

#define PART5_NAME			"initfs"
#define PART5_SIZE			2
#define PART5_MULL			1024*1024
#define PART5_SUFF			"m"
#define PART5_OFFS			0x002c0000
#define PART5_MASK			0x00000000

#define PART6_NAME			"rootfs"
#define PART6_SIZE			257280
#define PART6_MULL			1024
#define PART6_SUFF			"k"
#define PART6_OFFS			0x004c0000
#define PART6_MASK			0x00000000

#ifdef ONENAND_SUPPORT

#define CONFIG_SYS_ONENAND_BASE		ONENAND_MAP
#define CONFIG_MTD_DEVICE
#define CONFIG_MTD_PARTITIONS

#ifdef UBIFS_SUPPORT
#define CONFIG_RBTREE
#define CONFIG_LZO
#endif

#define MTDIDS_DEFAULT			"onenand0=onenand"
#define MTDPARTS_DEFAULT		"mtdparts=onenand:" \
		__stringify(PART1_SIZE) PART1_SUFF "(" PART1_NAME ")ro," \
		__stringify(PART2_SIZE) PART2_SUFF "(" PART2_NAME ")," \
		__stringify(PART3_SIZE) PART3_SUFF "(" PART3_NAME ")," \
		__stringify(PART4_SIZE) PART4_SUFF "(" PART4_NAME ")," \
		__stringify(PART5_SIZE) PART5_SUFF "(" PART5_NAME ")," \
		"-(" PART6_NAME ")"

#endif

/* Watchdog support */
#define CONFIG_HW_WATCHDOG

/*
 * Framebuffer
 */
/* Video console */
#define CONFIG_VIDEO
#define CONFIG_CFB_CONSOLE
#define CONFIG_CFB_CONSOLE_ANSI	/* Enable ANSI escape codes in framebuffer */
#define CONFIG_VIDEO_LOGO
#define VIDEO_FB_16BPP_PIXEL_SWAP
#define VIDEO_FB_16BPP_WORD_SWAP
#define CONFIG_VIDEO_SW_CURSOR
#define CONFIG_SPLASH_SCREEN

/* functions for cfb_console */
#define VIDEO_KBD_INIT_FCT		rx51_kp_init()
#define VIDEO_TSTC_FCT			rx51_kp_tstc
#define VIDEO_GETC_FCT			rx51_kp_getc
#ifndef __ASSEMBLY__
struct stdio_dev;
int rx51_kp_init(void);
int rx51_kp_tstc(struct stdio_dev *sdev);
int rx51_kp_getc(struct stdio_dev *sdev);
#endif

#ifndef MTDPARTS_DEFAULT
#define MTDPARTS_DEFAULT
#endif

/* Environment information */
#define CONFIG_EXTRA_ENV_SETTINGS \
	"mtdparts=" MTDPARTS_DEFAULT "\0" \
	"usbtty=cdc_acm\0" \
	"stdin=vga\0" \
	"stdout=vga\0" \
	"stderr=vga\0" \
	"setcon=setenv stdin ${con};" \
		"setenv stdout ${con};" \
		"setenv stderr ${con}\0" \
	"sercon=setenv con serial; run setcon\0" \
	"usbcon=setenv con usbtty; run setcon\0" \
	"vgacon=setenv con vga; run setcon\0" \
	"slide=gpio input " __stringify(GPIO_SLIDE) "\0" \
	"switchmmc=mmc dev ${mmcnum}\0" \
	"kernaddr=0x82008000\0" \
	"initrdaddr=0x84008000\0" \
	"scriptaddr=0x86008000\0" \
	"fileload=${mmctype}load mmc ${mmcnum}:${mmcpart} " \
		"${loadaddr} ${mmcfile}\0" \
	"kernload=setenv loadaddr ${kernaddr};" \
		"setenv mmcfile ${mmckernfile};" \
		"run fileload\0" \
	"initrdload=setenv loadaddr ${initrdaddr};" \
		"setenv mmcfile ${mmcinitrdfile};" \
		"run fileload\0" \
	"scriptload=setenv loadaddr ${scriptaddr};" \
		"setenv mmcfile ${mmcscriptfile};" \
		"run fileload\0" \
	"scriptboot=echo Running ${mmcscriptfile} from mmc " \
		"${mmcnum}:${mmcpart} ...; source ${scriptaddr}\0" \
	"kernboot=echo Booting ${mmckernfile} from mmc " \
		"${mmcnum}:${mmcpart} ...; bootm ${kernaddr}\0" \
	"kerninitrdboot=echo Booting ${mmckernfile} ${mmcinitrdfile} from mmc "\
		"${mmcnum}:${mmcpart} ...; bootm ${kernaddr} ${initrdaddr}\0" \
	"attachboot=echo Booting attached kernel image ...;" \
		"setenv setup_omap_atag 1;" \
		"bootm ${attkernaddr};" \
		"setenv setup_omap_atag\0" \
	"trymmcscriptboot=if run switchmmc; then " \
			"if run scriptload; then " \
				"run scriptboot;" \
			"fi;" \
		"fi\0" \
	"trymmckernboot=if run switchmmc; then " \
			"if run kernload; then " \
				"run kernboot;" \
			"fi;" \
		"fi\0" \
	"trymmckerninitrdboot=if run switchmmc; then " \
			"if run initrdload; then " \
				"if run kernload; then " \
					"run kerninitrdboot;" \
				"fi;" \
			"fi; " \
		"fi\0" \
	"trymmcpartboot=setenv mmcscriptfile boot.scr; run trymmcscriptboot;" \
		"setenv mmckernfile uImage; run trymmckernboot\0" \
	"trymmcallpartboot=setenv mmcpart 1; run trymmcpartboot;" \
		"setenv mmcpart 2; run trymmcpartboot;" \
		"setenv mmcpart 3; run trymmcpartboot;" \
		"setenv mmcpart 4; run trymmcpartboot\0" \
	"trymmcboot=if run switchmmc; then " \
			"setenv mmctype fat;" \
			"run trymmcallpartboot;" \
			"setenv mmctype ext2;" \
			"run trymmcallpartboot;" \
			"setenv mmctype ext4;" \
			"run trymmcallpartboot;" \
		"fi\0" \
	"emmcboot=setenv mmcnum 1; run trymmcboot\0" \
	"sdboot=setenv mmcnum 0; run trymmcboot\0" \
	"menucmd=bootmenu\0" \
	"bootmenu_0=Attached kernel=run attachboot\0" \
	"bootmenu_1=Internal eMMC=run emmcboot\0" \
	"bootmenu_2=External SD card=run sdboot\0" \
	"bootmenu_3=U-Boot boot order=boot\0" \
	"bootmenu_delay=30\0" \
	""

#define CONFIG_PREBOOT \
	"setenv mmcnum 1; setenv mmcpart 1;" \
	"setenv mmcscriptfile bootmenu.scr;" \
	"if run switchmmc; then " \
		"setenv mmcdone true;" \
		"setenv mmctype fat;" \
		"if run scriptload; then true; else " \
			"setenv mmctype ext2;" \
			"if run scriptload; then true; else " \
				"setenv mmctype ext4;" \
				"if run scriptload; then true; else " \
					"setenv mmcdone false;" \
				"fi;" \
			"fi;" \
		"fi;" \
		"if ${mmcdone}; then " \
			"run scriptboot;" \
		"fi;" \
	"fi;" \
	"if run slide; then true; else " \
		"setenv bootmenu_delay 0;" \
		"setenv bootdelay 0;" \
	"fi"

#define CONFIG_POSTBOOTMENU \
	"echo;" \
	"echo Extra commands:;" \
	"echo run sercon - Use serial port for control.;" \
	"echo run usbcon - Use usbtty for control.;" \
	"echo run vgacon - Use framebuffer/keyboard.;" \
	"echo run sdboot - Boot from SD card slot.;" \
	"echo run emmcboot - Boot internal eMMC memory.;" \
	"echo run attachboot - Boot attached kernel image.;" \
	"echo"

#define CONFIG_BOOTCOMMAND \
	"run sdboot;" \
	"run emmcboot;" \
	"run attachboot;" \
	"echo"

#define CONFIG_BOOTDELAY 30
#define CONFIG_AUTOBOOT_KEYED
#define CONFIG_MENU
#define CONFIG_MENU_SHOW

/*
 * Miscellaneous configurable options
 */
#define CONFIG_SYS_LONGHELP			/* undef to save memory */
#define CONFIG_SYS_HUSH_PARSER			/* use "hush" command parser */
#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
#define CONFIG_SYS_PROMPT		"Nokia RX-51 # "
#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size */
/* Print Buffer Size */
#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
						sizeof(CONFIG_SYS_PROMPT) + 16)
#define CONFIG_SYS_MAXARGS		16	/* max number of command args */
/* Boot Argument Buffer Size */
#define CONFIG_SYS_BARGSIZE		(CONFIG_SYS_CBSIZE)

#define CONFIG_SYS_MEMTEST_START	(OMAP34XX_SDRC_CS0)
#define CONFIG_SYS_MEMTEST_END		(OMAP34XX_SDRC_CS0 + 0x01F00000)/*31MB*/

/* default load address */
#define CONFIG_SYS_LOAD_ADDR		(OMAP34XX_SDRC_CS0)

/*
 * OMAP3 has 12 GP timers, they can be driven by the system clock
 * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
 * This rate is divided by a local divisor.
 */
#define CONFIG_SYS_TIMERBASE		(OMAP34XX_GPT2)
#define CONFIG_SYS_PTV			2	/* Divisor: 2^(PTV+1) => 8 */

/*
 * Stack sizes
 *
 * The stack sizes are set up in start.S using the settings below
 */
#define CONFIG_STACKSIZE		(128 << 10) /* regular stack 128 KiB */

/*
 * Physical Memory Map
 */
#define CONFIG_NR_DRAM_BANKS		2
#define PHYS_SDRAM_1			OMAP34XX_SDRC_CS0

/*
 * FLASH and environment organization
 */

#define CONFIG_ENV_IS_NOWHERE

#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
#define CONFIG_SYS_INIT_RAM_ADDR	0x4020f800
#define CONFIG_SYS_INIT_RAM_SIZE	0x800
#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_INIT_RAM_ADDR + \
			CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)

/*
 * Attached kernel image
 */

#define SDRAM_SIZE			0x10000000	/* 256 MB */
#define SDRAM_END			(CONFIG_SYS_SDRAM_BASE + SDRAM_SIZE)

#define IMAGE_MAXSIZE			0x1FF800	/* 2 MB - 2 kB */
#define KERNEL_OFFSET			0x40000		/* 256 kB */
#define KERNEL_MAXSIZE			(IMAGE_MAXSIZE-KERNEL_OFFSET)
#define KERNEL_ADDRESS			(SDRAM_END-KERNEL_MAXSIZE)

/* Reserve protected RAM for attached kernel */
#define CONFIG_PRAM			((KERNEL_MAXSIZE >> 10)+1)

#endif /* __CONFIG_H */
Commit	Line	Data
ed407be5 PR	1	/*
	2	* (C) Copyright 2011-2012
	3	* Pali Rohár <pali.rohar@gmail.com>
	4	*
	5	* (C) Copyright 2010
	6	* Alistair Buxton <a.j.buxton@gmail.com>
	7	*
	8	* Derived from Beagle Board code:
	9	* (C) Copyright 2006-2008
	10	* Texas Instruments.
	11	* Richard Woodruff <r-woodruff2@ti.com>
	12	* Syed Mohammed Khasim <x0khasim@ti.com>
	13	*
	14	* Configuration settings for the Nokia RX-51 aka N900.
	15	*
3765b3e7	16	* SPDX-License-Identifier: GPL-2.0+
ed407be5 PR	17	*/
	18
	19	#ifndef __CONFIG_H
	20	#define __CONFIG_H
	21
	22	/*
	23	* High Level Configuration Options
	24	*/
	25
	26	#define CONFIG_OMAP /* in a TI OMAP core */
ed407be5 PR	27	#define CONFIG_OMAP3430 /* which is in a 3430 */
	28	#define CONFIG_OMAP3_RX51 /* working with RX51 */
	29	#define CONFIG_SYS_L2CACHE_OFF /* pretend there is no L2 CACHE */
806d2792	30	#define CONFIG_OMAP_COMMON
ed407be5 PR	31
	32	#define CONFIG_MACH_TYPE MACH_TYPE_NOKIA_RX51
	33
	34	/*
	35	* Nokia X-Loader loading secondary image to address 0x80400000
	36	* NOLO loading boot image to random place, so it doesn't really
	37	* matter what we set this to. We have to copy u-boot to this address
	38	*/
	39	#define CONFIG_SYS_TEXT_BASE 0x80008000
	40
	41	#define CONFIG_SDRC /* The chip has SDRC controller */
	42
	43	#include <asm/arch/cpu.h> /* get chip and board defs */
	44	#include <asm/arch/omap3.h>
	45	#include <asm/arch/mem.h>
	46	#include <linux/stringify.h>
	47
	48	/*
	49	* Display CPU and Board information
	50	*/
	51	#define CONFIG_DISPLAY_CPUINFO
	52	#define CONFIG_DISPLAY_BOARDINFO
	53
	54	/* Clock Defines */
	55	#define V_OSCK 26000000 /* Clock output from T2 */
	56	#define V_SCLK (V_OSCK >> 1)
	57
	58	#undef CONFIG_USE_IRQ /* no support for IRQs */
	59	#define CONFIG_MISC_INIT_R
	60	#define CONFIG_SKIP_LOWLEVEL_INIT /* X-Loader set everything up */
	61
	62	#define CONFIG_CMDLINE_TAG /* enable passing kernel command line string */
	63	#define CONFIG_INITRD_TAG /* enable passing initrd */
	64	#define CONFIG_REVISION_TAG /* enable passing revision tag*/
	65	#define CONFIG_SETUP_MEMORY_TAGS /* enable memory tag */
	66
	67	/*
	68	* Size of malloc() pool
	69	*/
	70	#define CONFIG_ENV_SIZE (128 << 10)
	71	#define CONFIG_UBI_SIZE (512 << 10)
	72	#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + CONFIG_UBI_SIZE + \
	73	(128 << 10))
	74
	75	/*
	76	* Hardware drivers
	77	*/
	78
	79	/*
	80	* NS16550 Configuration
	81	*/
	82	#define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */
	83
	84	#define CONFIG_SYS_NS16550
	85	#define CONFIG_SYS_NS16550_SERIAL
	86	#define CONFIG_SYS_NS16550_REG_SIZE (-4)
	87	#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK
	88
	89	/*
	90	* select serial console configuration
	91	*/
	92	#define CONFIG_CONS_INDEX 3
	93	#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3
	94	#define CONFIG_SERIAL3 3 /* UART3 on RX-51 */
95
96	/* allow to overwrite serial and ethaddr */
97	#define CONFIG_ENV_OVERWRITE
98	#define CONFIG_BAUDRATE 115200
99	#define CONFIG_SYS_BAUDRATE_TABLE { 4800, 9600, 19200, 38400, 57600, 115200 }
100	#define CONFIG_MMC
101	#define CONFIG_GENERIC_MMC
102	#define CONFIG_OMAP_HSMMC
103	#define CONFIG_DOS_PARTITION
104
105	/* USB */
106	#define CONFIG_MUSB_UDC
107	#define CONFIG_MUSB_HDC
108	#define CONFIG_USB_OMAP3
109	#define CONFIG_TWL4030_USB
110
111	/* USB device configuration */
112	#define CONFIG_USB_DEVICE
113	#define CONFIG_USBD_VENDORID 0x0421
114	#define CONFIG_USBD_PRODUCTID 0x01c8
115	#define CONFIG_USBD_MANUFACTURER "Nokia"
116	#define CONFIG_USBD_PRODUCT_NAME "N900"
117
118	#define CONFIG_SYS_CONSOLE_IS_IN_ENV
119	#define CONFIG_SYS_NO_FLASH
120
121	/* commands to include */
122	#include <config_cmd_default.h>
123
124	#define CONFIG_CMD_EXT2 /* EXT2 Support */
125	#define CONFIG_CMD_EXT4 /* EXT4 Support */
126	#define CONFIG_CMD_FAT /* FAT support */
127
128	#define CONFIG_CMD_I2C /* I2C serial bus support */
129	#define CONFIG_CMD_MMC /* MMC support */
130	#define CONFIG_CMD_GPIO /* Enable gpio command */
131
132	#define CONFIG_CMDLINE_EDITING /* add command line history */
133	#define CONFIG_AUTO_COMPLETE /* add autocompletion support */
134
d9993988	135	#define CONFIG_CMD_BOOTMENU /* ANSI terminal Boot Menu */
ed407be5 PR	136	#define CONFIG_CMD_CLEAR /* ANSI terminal clear screen command */
	137
	138	#ifdef ONENAND_SUPPORT
	139
	140	#define CONFIG_CMD_ONENAND /* ONENAND support */
	141	#define CONFIG_CMD_MTDPARTS /* mtd parts support */
	142
	143	#ifdef UBIFS_SUPPORT
	144	#define CONFIG_CMD_UBI /* UBI Support */
	145	#define CONFIG_CMD_UBIFS /* UBIFS Support */
	146	#endif
	147
	148	#endif
	149
	150	/* commands not needed from config_cmd_default.h */
	151	#undef CONFIG_CMD_FPGA /* FPGA configuration Support */
	152	#undef CONFIG_CMD_IMI /* iminfo */
	153	#undef CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */
	154	#undef CONFIG_CMD_NFS /* NFS support */
	155	#undef CONFIG_CMD_SAVEENV /* saveenv */
	156	#undef CONFIG_CMD_SETGETDCR /* DCR support on 4xx */
	157
	158	#define CONFIG_OMAP3_SPI
6789e84e HS	159	#define CONFIG_SYS_I2C
	160	#define CONFIG_SYS_OMAP24_I2C_SPEED 100000
	161	#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
	162	#define CONFIG_SYS_I2C_OMAP34XX
ed407be5 PR	163
	164	/*
	165	* TWL4030
	166	*/
	167	#define CONFIG_TWL4030_POWER
	168	#define CONFIG_TWL4030_LED
	169	#define CONFIG_TWL4030_KEYPAD
	170
	171	#define CONFIG_OMAP_GPIO
	172	#define GPIO_SLIDE 71
	173
	174	/*
	175	* Board ONENAND Info.
	176	*/
	177
	178	#define PART1_NAME "bootloader"
	179	#define PART1_SIZE 128
	180	#define PART1_MULL 1024
	181	#define PART1_SUFF "k"
	182	#define PART1_OFFS 0x00000000
	183	#define PART1_MASK 0x00000003
	184
	185	#define PART2_NAME "config"
	186	#define PART2_SIZE 384
	187	#define PART2_MULL 1024
	188	#define PART2_SUFF "k"
	189	#define PART2_OFFS 0x00020000
	190	#define PART2_MASK 0x00000000
	191
	192	#define PART3_NAME "log"
	193	#define PART3_SIZE 256
	194	#define PART3_MULL 1024
	195	#define PART3_SUFF "k"
	196	#define PART3_OFFS 0x00080000
	197	#define PART3_MASK 0x00000000
	198
	199	#define PART4_NAME "kernel"
	200	#define PART4_SIZE 2
	201	#define PART4_MULL 1024*1024
	202	#define PART4_SUFF "m"
	203	#define PART4_OFFS 0x000c0000
	204	#define PART4_MASK 0x00000000
	205
	206	#define PART5_NAME "initfs"
	207	#define PART5_SIZE 2
	208	#define PART5_MULL 1024*1024
	209	#define PART5_SUFF "m"
	210	#define PART5_OFFS 0x002c0000
	211	#define PART5_MASK 0x00000000
	212
	213	#define PART6_NAME "rootfs"
	214	#define PART6_SIZE 257280
	215	#define PART6_MULL 1024
	216	#define PART6_SUFF "k"
	217	#define PART6_OFFS 0x004c0000
	218	#define PART6_MASK 0x00000000
	219
	220	#ifdef ONENAND_SUPPORT
	221
ed407be5 PR	222	#define CONFIG_SYS_ONENAND_BASE ONENAND_MAP
	223	#define CONFIG_MTD_DEVICE
	224	#define CONFIG_MTD_PARTITIONS
	225
	226	#ifdef UBIFS_SUPPORT
	227	#define CONFIG_RBTREE
	228	#define CONFIG_LZO
	229	#endif
	230
	231	#define MTDIDS_DEFAULT "onenand0=onenand"
	232	#define MTDPARTS_DEFAULT "mtdparts=onenand:" \
	233	__stringify(PART1_SIZE) PART1_SUFF "(" PART1_NAME ")ro," \
	234	__stringify(PART2_SIZE) PART2_SUFF "(" PART2_NAME ")," \
	235	__stringify(PART3_SIZE) PART3_SUFF "(" PART3_NAME ")," \
	236	__stringify(PART4_SIZE) PART4_SUFF "(" PART4_NAME ")," \
	237	__stringify(PART5_SIZE) PART5_SUFF "(" PART5_NAME ")," \
	238	"-(" PART6_NAME ")"
	239
	240	#endif
	241
	242	/* Watchdog support */
	243	#define CONFIG_HW_WATCHDOG
	244
	245	/*
	246	* Framebuffer
	247	*/
	248	/* Video console */
	249	#define CONFIG_VIDEO
	250	#define CONFIG_CFB_CONSOLE
	251	#define CONFIG_CFB_CONSOLE_ANSI /* Enable ANSI escape codes in framebuffer */
	252	#define CONFIG_VIDEO_LOGO
	253	#define VIDEO_FB_16BPP_PIXEL_SWAP
	254	#define VIDEO_FB_16BPP_WORD_SWAP
	255	#define CONFIG_VIDEO_SW_CURSOR
	256	#define CONFIG_SPLASH_SCREEN
	257
	258	/* functions for cfb_console */
	259	#define VIDEO_KBD_INIT_FCT rx51_kp_init()
	260	#define VIDEO_TSTC_FCT rx51_kp_tstc
	261	#define VIDEO_GETC_FCT rx51_kp_getc
	262	#ifndef __ASSEMBLY__
709ea543	263	struct stdio_dev;
ed407be5	264	int rx51_kp_init(void);
709ea543 SG	265	int rx51_kp_tstc(struct stdio_dev *sdev);
709ea543 SG	266	int rx51_kp_getc(struct stdio_dev *sdev);
ed407be5 PR	267	#endif
	268
	269	#ifndef MTDPARTS_DEFAULT
	270	#define MTDPARTS_DEFAULT
	271	#endif
	272
	273	/* Environment information */
ed407be5 PR	274	#define CONFIG_EXTRA_ENV_SETTINGS \
	275	"mtdparts=" MTDPARTS_DEFAULT "\0" \
	276	"usbtty=cdc_acm\0" \
	277	"stdin=vga\0" \
	278	"stdout=vga\0" \
	279	"stderr=vga\0" \
	280	"setcon=setenv stdin ${con};" \
	281	"setenv stdout ${con};" \
	282	"setenv stderr ${con}\0" \
	283	"sercon=setenv con serial; run setcon\0" \
	284	"usbcon=setenv con usbtty; run setcon\0" \
	285	"vgacon=setenv con vga; run setcon\0" \
	286	"slide=gpio input " __stringify(GPIO_SLIDE) "\0" \
	287	"switchmmc=mmc dev ${mmcnum}\0" \
	288	"kernaddr=0x82008000\0" \
	289	"initrdaddr=0x84008000\0" \
	290	"scriptaddr=0x86008000\0" \
	291	"fileload=${mmctype}load mmc ${mmcnum}:${mmcpart} " \
	292	"${loadaddr} ${mmcfile}\0" \
	293	"kernload=setenv loadaddr ${kernaddr};" \
	294	"setenv mmcfile ${mmckernfile};" \
	295	"run fileload\0" \
	296	"initrdload=setenv loadaddr ${initrdaddr};" \
	297	"setenv mmcfile ${mmcinitrdfile};" \
	298	"run fileload\0" \
	299	"scriptload=setenv loadaddr ${scriptaddr};" \
	300	"setenv mmcfile ${mmcscriptfile};" \
	301	"run fileload\0" \
	302	"scriptboot=echo Running ${mmcscriptfile} from mmc " \
	303	"${mmcnum}:${mmcpart} ...; source ${scriptaddr}\0" \
	304	"kernboot=echo Booting ${mmckernfile} from mmc " \
	305	"${mmcnum}:${mmcpart} ...; bootm ${kernaddr}\0" \
	306	"kerninitrdboot=echo Booting ${mmckernfile} ${mmcinitrdfile} from mmc "\
	307	"${mmcnum}:${mmcpart} ...; bootm ${kernaddr} ${initrdaddr}\0" \
	308	"attachboot=echo Booting attached kernel image ...;" \
	309	"setenv setup_omap_atag 1;" \
	310	"bootm ${attkernaddr};" \
	311	"setenv setup_omap_atag\0" \
	312	"trymmcscriptboot=if run switchmmc; then " \
	313	"if run scriptload; then " \
	314	"run scriptboot;" \
	315	"fi;" \
	316	"fi\0" \
	317	"trymmckernboot=if run switchmmc; then " \
	318	"if run kernload; then " \
	319	"run kernboot;" \
	320	"fi;" \
	321	"fi\0" \
	322	"trymmckerninitrdboot=if run switchmmc; then " \
	323	"if run initrdload; then " \
	324	"if run kernload; then " \
	325	"run kerninitrdboot;" \
	326	"fi;" \
	327	"fi; " \
	328	"fi\0" \
	329	"trymmcpartboot=setenv mmcscriptfile boot.scr; run trymmcscriptboot;" \
	330	"setenv mmckernfile uImage; run trymmckernboot\0" \
	331	"trymmcallpartboot=setenv mmcpart 1; run trymmcpartboot;" \
	332	"setenv mmcpart 2; run trymmcpartboot;" \
	333	"setenv mmcpart 3; run trymmcpartboot;" \
	334	"setenv mmcpart 4; run trymmcpartboot\0" \
	335	"trymmcboot=if run switchmmc; then " \
	336	"setenv mmctype fat;" \
	337	"run trymmcallpartboot;" \
338	"setenv mmctype ext2;" \
339	"run trymmcallpartboot;" \
340	"setenv mmctype ext4;" \
341	"run trymmcallpartboot;" \
342	"fi\0" \
343	"emmcboot=setenv mmcnum 1; run trymmcboot\0" \
344	"sdboot=setenv mmcnum 0; run trymmcboot\0" \
d9993988 PR	345	"menucmd=bootmenu\0" \
	346	"bootmenu_0=Attached kernel=run attachboot\0" \
	347	"bootmenu_1=Internal eMMC=run emmcboot\0" \
	348	"bootmenu_2=External SD card=run sdboot\0" \
	349	"bootmenu_3=U-Boot boot order=boot\0" \
	350	"bootmenu_delay=30\0" \
ed407be5 PR	351	""
	352
	353	#define CONFIG_PREBOOT \
d9993988 PR	354	"setenv mmcnum 1; setenv mmcpart 1;" \
	355	"setenv mmcscriptfile bootmenu.scr;" \
	356	"if run switchmmc; then " \
	357	"setenv mmcdone true;" \
	358	"setenv mmctype fat;" \
	359	"if run scriptload; then true; else " \
	360	"setenv mmctype ext2;" \
	361	"if run scriptload; then true; else " \
	362	"setenv mmctype ext4;" \
	363	"if run scriptload; then true; else " \
	364	"setenv mmcdone false;" \
	365	"fi;" \
	366	"fi;" \
	367	"fi;" \
	368	"if ${mmcdone}; then " \
	369	"run scriptboot;" \
	370	"fi;" \
	371	"fi;" \
	372	"if run slide; then true; else " \
	373	"setenv bootmenu_delay 0;" \
	374	"setenv bootdelay 0;" \
	375	"fi"
	376
	377	#define CONFIG_POSTBOOTMENU \
	378	"echo;" \
ed407be5 PR	379	"echo Extra commands:;" \
	380	"echo run sercon - Use serial port for control.;" \
	381	"echo run usbcon - Use usbtty for control.;" \
	382	"echo run vgacon - Use framebuffer/keyboard.;" \
	383	"echo run sdboot - Boot from SD card slot.;" \
	384	"echo run emmcboot - Boot internal eMMC memory.;" \
	385	"echo run attachboot - Boot attached kernel image.;" \
	386	"echo"
	387
	388	#define CONFIG_BOOTCOMMAND \
	389	"run sdboot;" \
	390	"run emmcboot;" \
	391	"run attachboot;" \
	392	"echo"
	393
d9993988 PR	394	#define CONFIG_BOOTDELAY 30
	395	#define CONFIG_AUTOBOOT_KEYED
	396	#define CONFIG_MENU
	397	#define CONFIG_MENU_SHOW
	398
ed407be5 PR	399	/*
	400	* Miscellaneous configurable options
	401	*/
	402	#define CONFIG_SYS_LONGHELP /* undef to save memory */
	403	#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
	404	#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
	405	#define CONFIG_SYS_PROMPT "Nokia RX-51 # "
	406	#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
	407	/* Print Buffer Size */
	408	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
	409	sizeof(CONFIG_SYS_PROMPT) + 16)
	410	#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
	411	/* Boot Argument Buffer Size */
	412	#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE)
	413
	414	#define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0)
	415	#define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + 0x01F00000)/31MB/
	416
	417	/* default load address */
	418	#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0)
	419
	420	/*
	421	* OMAP3 has 12 GP timers, they can be driven by the system clock
	422	* (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
	423	* This rate is divided by a local divisor.
	424	*/
	425	#define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2)
	426	#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
ed407be5 PR	427
	428	/*
	429	* Stack sizes
	430	*
	431	* The stack sizes are set up in start.S using the settings below
	432	*/
	433	#define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */
	434
	435	/*
	436	* Physical Memory Map
	437	*/
	438	#define CONFIG_NR_DRAM_BANKS 2
	439	#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0
	440
	441	/*
	442	* FLASH and environment organization
	443	*/
	444
	445	#define CONFIG_ENV_IS_NOWHERE
	446
	447	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
	448	#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800
	449	#define CONFIG_SYS_INIT_RAM_SIZE 0x800
	450	#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
	451	CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
	452
	453	/*
	454	* Attached kernel image
	455	*/
	456
	457	#define SDRAM_SIZE 0x10000000 /* 256 MB */
	458	#define SDRAM_END (CONFIG_SYS_SDRAM_BASE + SDRAM_SIZE)
	459
	460	#define IMAGE_MAXSIZE 0x1FF800 /* 2 MB - 2 kB */
	461	#define KERNEL_OFFSET 0x40000 /* 256 kB */
	462	#define KERNEL_MAXSIZE (IMAGE_MAXSIZE-KERNEL_OFFSET)
	463	#define KERNEL_ADDRESS (SDRAM_END-KERNEL_MAXSIZE)
	464
	465	/* Reserve protected RAM for attached kernel */
	466	#define CONFIG_PRAM ((KERNEL_MAXSIZE >> 10)+1)
	467
	468	#endif /* __CONFIG_H */