[people/ms/u-boot.git] / include / configs / omap3_beagle.h

/*
 * (C) Copyright 2006-2008
 * Texas Instruments.
 * Richard Woodruff <r-woodruff2@ti.com>
 * Syed Mohammed Khasim <x0khasim@ti.com>
 *
 * Configuration settings for the TI OMAP3530 Beagle board.
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

#ifndef __CONFIG_H
#define __CONFIG_H

/*
 * High Level Configuration Options
 */
#define CONFIG_ARMV7		1	/* This is an ARM V7 CPU core */
#define CONFIG_OMAP		1	/* in a TI OMAP core */
#define CONFIG_OMAP34XX		1	/* which is a 34XX */
#define CONFIG_OMAP3430		1	/* which is in a 3430 */
#define CONFIG_OMAP3_BEAGLE	1	/* working with BEAGLE */

#define CONFIG_SDRC	/* The chip has SDRC controller */

#include <asm/arch/cpu.h>		/* get chip and board defs */
#include <asm/arch/omap3.h>

/*
 * Display CPU and Board information
 */
#define CONFIG_DISPLAY_CPUINFO		1
#define CONFIG_DISPLAY_BOARDINFO	1

/* Clock Defines */
#define V_OSCK			26000000	/* Clock output from T2 */
#define V_SCLK			(V_OSCK >> 1)

#undef CONFIG_USE_IRQ				/* no support for IRQs */
#define CONFIG_MISC_INIT_R

#define CONFIG_CMDLINE_TAG		1	/* enable passing of ATAGs */
#define CONFIG_SETUP_MEMORY_TAGS	1
#define CONFIG_INITRD_TAG		1
#define CONFIG_REVISION_TAG		1

/*
 * Size of malloc() pool
 */
#define CONFIG_ENV_SIZE			(128 << 10)	/* 128 KiB */
						/* Sector */
#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (128 << 10))
#define CONFIG_SYS_GBL_DATA_SIZE	128	/* bytes reserved for */
						/* initial data */

/*
 * Hardware drivers
 */

/*
 * NS16550 Configuration
 */
#define V_NS16550_CLK			48000000	/* 48MHz (APLL96/2) */

#define CONFIG_SYS_NS16550
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE	(-4)
#define CONFIG_SYS_NS16550_CLK		V_NS16550_CLK

/*
 * select serial console configuration
 */
#define CONFIG_CONS_INDEX		3
#define CONFIG_SYS_NS16550_COM3		OMAP34XX_UART3
#define CONFIG_SERIAL3			3	/* UART3 on Beagle Rev 2 */

/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_BAUDRATE			115200
#define CONFIG_SYS_BAUDRATE_TABLE	{4800, 9600, 19200, 38400, 57600,\
					115200}
#define CONFIG_MMC			1
#define CONFIG_OMAP3_MMC		1
#define CONFIG_DOS_PARTITION		1

/* DDR - I use Micron DDR */
#define CONFIG_OMAP3_MICRON_DDR		1

/* USB */
#define CONFIG_MUSB_UDC			1
#define CONFIG_USB_OMAP3		1
#define CONFIG_TWL4030_USB		1

/* USB device configuration */
#define CONFIG_USB_DEVICE		1
#define CONFIG_USB_TTY			1
#define CONFIG_SYS_CONSOLE_IS_IN_ENV	1
/* Change these to suit your needs */
#define CONFIG_USBD_VENDORID		0x0451
#define CONFIG_USBD_PRODUCTID		0x5678
#define CONFIG_USBD_MANUFACTURER	"Texas Instruments"
#define CONFIG_USBD_PRODUCT_NAME	"Beagle"

/* commands to include */
#include <config_cmd_default.h>

#define CONFIG_CMD_CACHE
#define CONFIG_CMD_EXT2		/* EXT2 Support			*/
#define CONFIG_CMD_FAT		/* FAT support			*/
#define CONFIG_CMD_JFFS2	/* JFFS2 Support		*/
#define CONFIG_CMD_MTDPARTS	/* Enable MTD parts commands */
#define CONFIG_MTD_DEVICE	/* needed for mtdparts commands */
#define MTDIDS_DEFAULT			"nand0=nand"
#define MTDPARTS_DEFAULT		"mtdparts=nand:512k(x-loader),"\
					"1920k(u-boot),128k(u-boot-env),"\
					"4m(kernel),-(fs)"

#define CONFIG_CMD_I2C		/* I2C serial bus support	*/
#define CONFIG_CMD_MMC		/* MMC support			*/
#define CONFIG_CMD_NAND		/* NAND support			*/

#undef CONFIG_CMD_FLASH		/* flinfo, erase, protect	*/
#undef CONFIG_CMD_FPGA		/* FPGA configuration Support	*/
#undef CONFIG_CMD_IMI		/* iminfo			*/
#undef CONFIG_CMD_IMLS		/* List all found images	*/
#undef CONFIG_CMD_NET		/* bootp, tftpboot, rarpboot	*/
#undef CONFIG_CMD_NFS		/* NFS support			*/

#define CONFIG_SYS_NO_FLASH
#define CONFIG_HARD_I2C			1
#define CONFIG_SYS_I2C_SPEED		100000
#define CONFIG_SYS_I2C_SLAVE		1
#define CONFIG_SYS_I2C_BUS		0
#define CONFIG_SYS_I2C_BUS_SELECT	1
#define CONFIG_DRIVER_OMAP34XX_I2C	1

/*
 * TWL4030
 */
#define CONFIG_TWL4030_POWER		1
#define CONFIG_TWL4030_LED		1

/*
 * Board NAND Info.
 */
#define CONFIG_SYS_NAND_QUIET_TEST	1
#define CONFIG_NAND_OMAP_GPMC
#define CONFIG_SYS_NAND_ADDR		NAND_BASE	/* physical address */
							/* to access nand */
#define CONFIG_SYS_NAND_BASE		NAND_BASE	/* physical address */
							/* to access nand at */
							/* CS0 */
#define GPMC_NAND_ECC_LP_x16_LAYOUT	1

#define CONFIG_SYS_MAX_NAND_DEVICE	1		/* Max number of NAND */
							/* devices */
#define CONFIG_JFFS2_NAND
/* nand device jffs2 lives on */
#define CONFIG_JFFS2_DEV		"nand0"
/* start of jffs2 partition */
#define CONFIG_JFFS2_PART_OFFSET	0x680000
#define CONFIG_JFFS2_PART_SIZE		0xf980000	/* size of jffs2 */
							/* partition */

/* Environment information */
#define CONFIG_BOOTDELAY		10

#define CONFIG_EXTRA_ENV_SETTINGS \
	"loadaddr=0x82000000\0" \
	"usbtty=cdc_acm\0" \
	"console=ttyS2,115200n8\0" \
	"mpurate=500\0" \
	"vram=12M\0" \
	"dvimode=1024x768MR-16@60\0" \
	"defaultdisplay=dvi\0" \
	"mmcroot=/dev/mmcblk0p2 rw\0" \
	"mmcrootfstype=ext3 rootwait\0" \
	"nandroot=/dev/mtdblock4 rw\0" \
	"nandrootfstype=jffs2\0" \
	"mmcargs=setenv bootargs console=${console} " \
		"mpurate=${mpurate} " \
		"vram=${vram} " \
		"omapfb.mode=dvi:${dvimode} " \
		"omapfb.debug=y " \
		"omapdss.def_disp=${defaultdisplay} " \
		"root=${mmcroot} " \
		"rootfstype=${mmcrootfstype}\0" \
	"nandargs=setenv bootargs console=${console} " \
		"mpurate=${mpurate} " \
		"vram=${vram} " \
		"omapfb.mode=dvi:${dvimode} " \
		"omapfb.debug=y " \
		"omapdss.def_disp=${defaultdisplay} " \
		"root=${nandroot} " \
		"rootfstype=${nandrootfstype}\0" \
	"loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \
	"bootscript=echo Running bootscript from mmc ...; " \
		"source ${loadaddr}\0" \
	"loaduimage=fatload mmc 0 ${loadaddr} uImage\0" \
	"mmcboot=echo Booting from mmc ...; " \
		"run mmcargs; " \
		"bootm ${loadaddr}\0" \
	"nandboot=echo Booting from nand ...; " \
		"run nandargs; " \
		"nand read ${loadaddr} 280000 400000; " \
		"bootm ${loadaddr}\0" \

#define CONFIG_BOOTCOMMAND \
	"if mmc init; then " \
		"if run loadbootscript; then " \
			"run bootscript; " \
		"else " \
			"if run loaduimage; then " \
				"run mmcboot; " \
			"else run nandboot; " \
			"fi; " \
		"fi; " \
	"else run nandboot; fi"

#define CONFIG_AUTO_COMPLETE		1
/*
 * Miscellaneous configurable options
 */
#define CONFIG_SYS_LONGHELP		/* undef to save memory */
#define CONFIG_SYS_HUSH_PARSER		/* use "hush" command parser */
#define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
#define CONFIG_SYS_PROMPT		"OMAP3 beagleboard.org # "
#define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size */
/* Print Buffer Size */
#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
					sizeof(CONFIG_SYS_PROMPT) + 16)
#define CONFIG_SYS_MAXARGS		16	/* max number of command args */
/* Boot Argument Buffer Size */
#define CONFIG_SYS_BARGSIZE		(CONFIG_SYS_CBSIZE)

#define CONFIG_SYS_MEMTEST_START	(OMAP34XX_SDRC_CS0)	/* memtest */
								/* works on */
#define CONFIG_SYS_MEMTEST_END		(OMAP34XX_SDRC_CS0 + \
					0x01F00000) /* 31MB */

#define CONFIG_SYS_LOAD_ADDR		(OMAP34XX_SDRC_CS0)	/* default */
							/* load address */

/*
 * OMAP3 has 12 GP timers, they can be driven by the system clock
 * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
 * This rate is divided by a local divisor.
 */
#define CONFIG_SYS_TIMERBASE		(OMAP34XX_GPT2)
#define CONFIG_SYS_PTV			2       /* Divisor: 2^(PTV+1) => 8 */
#define CONFIG_SYS_HZ			1000

/*-----------------------------------------------------------------------
 * Stack sizes
 *
 * The stack sizes are set up in start.S using the settings below
 */
#define CONFIG_STACKSIZE	(128 << 10)	/* regular stack 128 KiB */
#ifdef CONFIG_USE_IRQ
#define CONFIG_STACKSIZE_IRQ	(4 << 10)	/* IRQ stack 4 KiB */
#define CONFIG_STACKSIZE_FIQ	(4 << 10)	/* FIQ stack 4 KiB */
#endif

/*-----------------------------------------------------------------------
 * Physical Memory Map
 */
#define CONFIG_NR_DRAM_BANKS	2	/* CS1 may or may not be populated */
#define PHYS_SDRAM_1		OMAP34XX_SDRC_CS0
#define PHYS_SDRAM_1_SIZE	(32 << 20)	/* at least 32 MiB */
#define PHYS_SDRAM_2		OMAP34XX_SDRC_CS1

/* SDRAM Bank Allocation method */
#define SDRC_R_B_C		1

/*-----------------------------------------------------------------------
 * FLASH and environment organization
 */

/* **** PISMO SUPPORT *** */

/* Configure the PISMO */
#define PISMO1_NAND_SIZE		GPMC_SIZE_128M
#define PISMO1_ONEN_SIZE		GPMC_SIZE_128M

#define CONFIG_SYS_MAX_FLASH_SECT	520	/* max number of sectors on */
						/* one chip */
#define CONFIG_SYS_MAX_FLASH_BANKS	2	/* max number of flash banks */
#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 2 sectors */

#define CONFIG_SYS_FLASH_BASE		boot_flash_base

/* Monitor at start of flash */
#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_FLASH_BASE
#define CONFIG_SYS_ONENAND_BASE		ONENAND_MAP

#define CONFIG_ENV_IS_IN_NAND		1
#define ONENAND_ENV_OFFSET		0x260000 /* environment starts here */
#define SMNAND_ENV_OFFSET		0x260000 /* environment starts here */

#define CONFIG_SYS_ENV_SECT_SIZE	boot_flash_sec
#define CONFIG_ENV_OFFSET		boot_flash_off
#define CONFIG_ENV_ADDR			SMNAND_ENV_OFFSET

/*-----------------------------------------------------------------------
 * CFI FLASH driver setup
 */
/* timeout values are in ticks */
#define CONFIG_SYS_FLASH_ERASE_TOUT	(100 * CONFIG_SYS_HZ)
#define CONFIG_SYS_FLASH_WRITE_TOUT	(100 * CONFIG_SYS_HZ)

/* Flash banks JFFS2 should use */
#define CONFIG_SYS_MAX_MTD_BANKS	(CONFIG_SYS_MAX_FLASH_BANKS + \
					CONFIG_SYS_MAX_NAND_DEVICE)
#define CONFIG_SYS_JFFS2_MEM_NAND
/* use flash_info[2] */
#define CONFIG_SYS_JFFS2_FIRST_BANK	CONFIG_SYS_MAX_FLASH_BANKS
#define CONFIG_SYS_JFFS2_NUM_BANKS	1

#ifndef __ASSEMBLY__
extern unsigned int boot_flash_base;
extern volatile unsigned int boot_flash_env_addr;
extern unsigned int boot_flash_off;
extern unsigned int boot_flash_sec;
extern unsigned int boot_flash_type;
#endif

#endif /* __CONFIG_H */
Commit	Line	Data
f904cdbb DB	1	/*
	2	* (C) Copyright 2006-2008
	3	* Texas Instruments.
	4	* Richard Woodruff <r-woodruff2@ti.com>
	5	* Syed Mohammed Khasim <x0khasim@ti.com>
	6	*
	7	* Configuration settings for the TI OMAP3530 Beagle board.
	8	*
	9	* See file CREDITS for list of people who contributed to this
	10	* project.
	11	*
	12	* This program is free software; you can redistribute it and/or
	13	* modify it under the terms of the GNU General Public License as
	14	* published by the Free Software Foundation; either version 2 of
	15	* the License, or (at your option) any later version.
	16	*
	17	* This program is distributed in the hope that it will be useful,
	18	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	19	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	20	* GNU General Public License for more details.
	21	*
	22	* You should have received a copy of the GNU General Public License
	23	* along with this program; if not, write to the Free Software
	24	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	25	* MA 02111-1307 USA
	26	*/
	27
	28	#ifndef __CONFIG_H
	29	#define __CONFIG_H
f904cdbb DB	30
	31	/*
	32	* High Level Configuration Options
	33	*/
f56348af	34	#define CONFIG_ARMV7 1 /* This is an ARM V7 CPU core */
f904cdbb DB	35	#define CONFIG_OMAP 1 /* in a TI OMAP core */
	36	#define CONFIG_OMAP34XX 1 /* which is a 34XX */
	37	#define CONFIG_OMAP3430 1 /* which is in a 3430 */
	38	#define CONFIG_OMAP3_BEAGLE 1 /* working with BEAGLE */
	39
cae377b5 VH	40	#define CONFIG_SDRC /* The chip has SDRC controller */
cae377b5 VH	41
f904cdbb DB	42	#include <asm/arch/cpu.h> /* get chip and board defs */
	43	#include <asm/arch/omap3.h>
	44
6a6b62e3 SP	45	/*
	46	* Display CPU and Board information
	47	*/
	48	#define CONFIG_DISPLAY_CPUINFO 1
	49	#define CONFIG_DISPLAY_BOARDINFO 1
	50
f904cdbb DB	51	/* Clock Defines */
	52	#define V_OSCK 26000000 /* Clock output from T2 */
	53	#define V_SCLK (V_OSCK >> 1)
	54
	55	#undef CONFIG_USE_IRQ /* no support for IRQs */
	56	#define CONFIG_MISC_INIT_R
	57
	58	#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
	59	#define CONFIG_SETUP_MEMORY_TAGS 1
	60	#define CONFIG_INITRD_TAG 1
	61	#define CONFIG_REVISION_TAG 1
	62
	63	/*
	64	* Size of malloc() pool
	65	*/
9c44ddcc	66	#define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */
f904cdbb	67	/* Sector */
9c44ddcc	68	#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10))
f904cdbb DB	69	#define CONFIG_SYS_GBL_DATA_SIZE 128 /* bytes reserved for */
	70	/* initial data */
	71
	72	/*
	73	* Hardware drivers
	74	*/
	75
	76	/*
	77	* NS16550 Configuration
	78	*/
	79	#define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */
	80
	81	#define CONFIG_SYS_NS16550
	82	#define CONFIG_SYS_NS16550_SERIAL
	83	#define CONFIG_SYS_NS16550_REG_SIZE (-4)
	84	#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK
	85
	86	/*
	87	* select serial console configuration
	88	*/
	89	#define CONFIG_CONS_INDEX 3
	90	#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3
	91	#define CONFIG_SERIAL3 3 /* UART3 on Beagle Rev 2 */
	92
	93	/* allow to overwrite serial and ethaddr */
	94	#define CONFIG_ENV_OVERWRITE
	95	#define CONFIG_BAUDRATE 115200
	96	#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\
	97	115200}
	98	#define CONFIG_MMC 1
	99	#define CONFIG_OMAP3_MMC 1
	100	#define CONFIG_DOS_PARTITION 1
	101
30563a04 NM	102	/* DDR - I use Micron DDR */
	103	#define CONFIG_OMAP3_MICRON_DDR 1
	104
25374bfb TR	105	/* USB */
	106	#define CONFIG_MUSB_UDC 1
	107	#define CONFIG_USB_OMAP3 1
	108	#define CONFIG_TWL4030_USB 1
	109
	110	/* USB device configuration */
	111	#define CONFIG_USB_DEVICE 1
	112	#define CONFIG_USB_TTY 1
	113	#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1
	114	/* Change these to suit your needs */
	115	#define CONFIG_USBD_VENDORID 0x0451
	116	#define CONFIG_USBD_PRODUCTID 0x5678
	117	#define CONFIG_USBD_MANUFACTURER "Texas Instruments"
	118	#define CONFIG_USBD_PRODUCT_NAME "Beagle"
	119
f904cdbb DB	120	/* commands to include */
	121	#include <config_cmd_default.h>
	122
95c6f6d3	123	#define CONFIG_CMD_CACHE
f904cdbb DB	124	#define CONFIG_CMD_EXT2 /* EXT2 Support */
	125	#define CONFIG_CMD_FAT /* FAT support */
	126	#define CONFIG_CMD_JFFS2 /* JFFS2 Support */
917cfc70	127	#define CONFIG_CMD_MTDPARTS /* Enable MTD parts commands */
942556a9	128	#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
917cfc70 NM	129	#define MTDIDS_DEFAULT "nand0=nand"
	130	#define MTDPARTS_DEFAULT "mtdparts=nand:512k(x-loader),"\
	131	"1920k(u-boot),128k(u-boot-env),"\
	132	"4m(kernel),-(fs)"
f904cdbb DB	133
	134	#define CONFIG_CMD_I2C /* I2C serial bus support */
	135	#define CONFIG_CMD_MMC /* MMC support */
	136	#define CONFIG_CMD_NAND /* NAND support */
	137
	138	#undef CONFIG_CMD_FLASH /* flinfo, erase, protect */
	139	#undef CONFIG_CMD_FPGA /* FPGA configuration Support */
	140	#undef CONFIG_CMD_IMI /* iminfo */
	141	#undef CONFIG_CMD_IMLS /* List all found images */
	142	#undef CONFIG_CMD_NET /* bootp, tftpboot, rarpboot */
	143	#undef CONFIG_CMD_NFS /* NFS support */
	144
	145	#define CONFIG_SYS_NO_FLASH
0297ec7e	146	#define CONFIG_HARD_I2C 1
f904cdbb DB	147	#define CONFIG_SYS_I2C_SPEED 100000
	148	#define CONFIG_SYS_I2C_SLAVE 1
	149	#define CONFIG_SYS_I2C_BUS 0
	150	#define CONFIG_SYS_I2C_BUS_SELECT 1
	151	#define CONFIG_DRIVER_OMAP34XX_I2C 1
	152
2c155130 TR	153	/*
	154	* TWL4030
	155	*/
	156	#define CONFIG_TWL4030_POWER 1
	157	#define CONFIG_TWL4030_LED 1
	158
f904cdbb DB	159	/*
	160	* Board NAND Info.
	161	*/
60c23173	162	#define CONFIG_SYS_NAND_QUIET_TEST 1
f904cdbb DB	163	#define CONFIG_NAND_OMAP_GPMC
	164	#define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */
	165	/* to access nand */
	166	#define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */
	167	/* to access nand at */
	168	/* CS0 */
	169	#define GPMC_NAND_ECC_LP_x16_LAYOUT 1
	170
	171	#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */
	172	/* devices */
f904cdbb DB	173	#define CONFIG_JFFS2_NAND
	174	/* nand device jffs2 lives on */
	175	#define CONFIG_JFFS2_DEV "nand0"
	176	/* start of jffs2 partition */
	177	#define CONFIG_JFFS2_PART_OFFSET 0x680000
	178	#define CONFIG_JFFS2_PART_SIZE 0xf980000 /* size of jffs2 */
	179	/* partition */
	180
	181	/* Environment information */
	182	#define CONFIG_BOOTDELAY 10
	183
	184	#define CONFIG_EXTRA_ENV_SETTINGS \
	185	"loadaddr=0x82000000\0" \
25374bfb	186	"usbtty=cdc_acm\0" \
f904cdbb	187	"console=ttyS2,115200n8\0" \
5af32460	188	"mpurate=500\0" \
13d2cb98 SS	189	"vram=12M\0" \
	190	"dvimode=1024x768MR-16@60\0" \
	191	"defaultdisplay=dvi\0" \
	192	"mmcroot=/dev/mmcblk0p2 rw\0" \
	193	"mmcrootfstype=ext3 rootwait\0" \
	194	"nandroot=/dev/mtdblock4 rw\0" \
	195	"nandrootfstype=jffs2\0" \
f904cdbb	196	"mmcargs=setenv bootargs console=${console} " \
5af32460	197	"mpurate=${mpurate} " \
13d2cb98 SS	198	"vram=${vram} " \
	199	"omapfb.mode=dvi:${dvimode} " \
	200	"omapfb.debug=y " \
	201	"omapdss.def_disp=${defaultdisplay} " \
	202	"root=${mmcroot} " \
	203	"rootfstype=${mmcrootfstype}\0" \
f904cdbb	204	"nandargs=setenv bootargs console=${console} " \
5af32460	205	"mpurate=${mpurate} " \
13d2cb98 SS	206	"vram=${vram} " \
	207	"omapfb.mode=dvi:${dvimode} " \
	208	"omapfb.debug=y " \
	209	"omapdss.def_disp=${defaultdisplay} " \
	210	"root=${nandroot} " \
	211	"rootfstype=${nandrootfstype}\0" \
f904cdbb DB	212	"loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \
f904cdbb DB	213	"bootscript=echo Running bootscript from mmc ...; " \
74de7aef	214	"source ${loadaddr}\0" \
f904cdbb DB	215	"loaduimage=fatload mmc 0 ${loadaddr} uImage\0" \
	216	"mmcboot=echo Booting from mmc ...; " \
	217	"run mmcargs; " \
	218	"bootm ${loadaddr}\0" \
	219	"nandboot=echo Booting from nand ...; " \
	220	"run nandargs; " \
	221	"nand read ${loadaddr} 280000 400000; " \
	222	"bootm ${loadaddr}\0" \
	223
	224	#define CONFIG_BOOTCOMMAND \
a85693b3	225	"if mmc init; then " \
f904cdbb DB	226	"if run loadbootscript; then " \
	227	"run bootscript; " \
	228	"else " \
	229	"if run loaduimage; then " \
	230	"run mmcboot; " \
	231	"else run nandboot; " \
	232	"fi; " \
	233	"fi; " \
	234	"else run nandboot; fi"
	235
	236	#define CONFIG_AUTO_COMPLETE 1
	237	/*
	238	* Miscellaneous configurable options
	239	*/
f904cdbb DB	240	#define CONFIG_SYS_LONGHELP /* undef to save memory */
	241	#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
	242	#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
1270ec13	243	#define CONFIG_SYS_PROMPT "OMAP3 beagleboard.org # "
f904cdbb DB	244	#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
	245	/* Print Buffer Size */
	246	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
	247	sizeof(CONFIG_SYS_PROMPT) + 16)
	248	#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
	249	/* Boot Argument Buffer Size */
	250	#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE)
	251
	252	#define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0) /* memtest */
	253	/* works on */
	254	#define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \
	255	0x01F00000) /* 31MB */
	256
f904cdbb DB	257	#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0) /* default */
	258	/* load address */
	259
	260	/*
d3a513c2 MP	261	* OMAP3 has 12 GP timers, they can be driven by the system clock
	262	* (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
	263	* This rate is divided by a local divisor.
f904cdbb	264	*/
f904cdbb	265	#define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2)
d3a513c2 MP	266	#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
d3a513c2 MP	267	#define CONFIG_SYS_HZ 1000
f904cdbb DB	268
	269	/*-----------------------------------------------------------------------
	270	* Stack sizes
	271	*
	272	* The stack sizes are set up in start.S using the settings below
	273	*/
9c44ddcc	274	#define CONFIG_STACKSIZE (128 << 10) /* regular stack 128 KiB */
f904cdbb	275	#ifdef CONFIG_USE_IRQ
9c44ddcc SP	276	#define CONFIG_STACKSIZE_IRQ (4 << 10) /* IRQ stack 4 KiB */
9c44ddcc SP	277	#define CONFIG_STACKSIZE_FIQ (4 << 10) /* FIQ stack 4 KiB */
f904cdbb DB	278	#endif
	279
	280	/*-----------------------------------------------------------------------
	281	* Physical Memory Map
	282	*/
	283	#define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */
	284	#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0
9c44ddcc	285	#define PHYS_SDRAM_1_SIZE (32 << 20) /* at least 32 MiB */
f904cdbb DB	286	#define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1
	287
	288	/* SDRAM Bank Allocation method */
	289	#define SDRC_R_B_C 1
	290
	291	/*-----------------------------------------------------------------------
	292	* FLASH and environment organization
	293	*/
	294
	295	/* ** PISMO SUPPORT * */
	296
	297	/* Configure the PISMO */
	298	#define PISMO1_NAND_SIZE GPMC_SIZE_128M
	299	#define PISMO1_ONEN_SIZE GPMC_SIZE_128M
	300
	301	#define CONFIG_SYS_MAX_FLASH_SECT 520 /* max number of sectors on */
	302	/* one chip */
	303	#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of flash banks */
9c44ddcc	304	#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */
f904cdbb DB	305
	306	#define CONFIG_SYS_FLASH_BASE boot_flash_base
	307
	308	/* Monitor at start of flash */
	309	#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
	310	#define CONFIG_SYS_ONENAND_BASE ONENAND_MAP
	311
	312	#define CONFIG_ENV_IS_IN_NAND 1
	313	#define ONENAND_ENV_OFFSET 0x260000 /* environment starts here */
	314	#define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */
	315
	316	#define CONFIG_SYS_ENV_SECT_SIZE boot_flash_sec
	317	#define CONFIG_ENV_OFFSET boot_flash_off
	318	#define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET
	319
	320	/*-----------------------------------------------------------------------
	321	* CFI FLASH driver setup
	322	*/
	323	/* timeout values are in ticks */
	324	#define CONFIG_SYS_FLASH_ERASE_TOUT (100 * CONFIG_SYS_HZ)
	325	#define CONFIG_SYS_FLASH_WRITE_TOUT (100 * CONFIG_SYS_HZ)
	326
	327	/* Flash banks JFFS2 should use */
	328	#define CONFIG_SYS_MAX_MTD_BANKS (CONFIG_SYS_MAX_FLASH_BANKS + \
	329	CONFIG_SYS_MAX_NAND_DEVICE)
	330	#define CONFIG_SYS_JFFS2_MEM_NAND
	331	/* use flash_info[2] */
	332	#define CONFIG_SYS_JFFS2_FIRST_BANK CONFIG_SYS_MAX_FLASH_BANKS
	333	#define CONFIG_SYS_JFFS2_NUM_BANKS 1
	334
	335	#ifndef __ASSEMBLY__
f904cdbb DB	336	extern unsigned int boot_flash_base;
	337	extern volatile unsigned int boot_flash_env_addr;
	338	extern unsigned int boot_flash_off;
	339	extern unsigned int boot_flash_sec;
	340	extern unsigned int boot_flash_type;
	341	#endif
	342
f904cdbb	343	#endif /* __CONFIG_H */