[people/ms/u-boot.git] / include / configs / omap3_logic.h

/*
 * (C) Copyright 2011 Logic Product Development <www.logicpd.com>
 *	Peter Barada <peter.barada@logicpd.com>
 *
 * Configuration settings for the Logic OMAP35x/DM37x SOM LV/Torpedo
 * reference boards.
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __CONFIG_H
#define __CONFIG_H

/*
 * High Level Configuration Options
 */

#define CONFIG_NR_DRAM_BANKS	2	/* CS1 may or may not be populated */
#define CONFIG_SYS_TEXT_BASE	0x80400000

#include <configs/ti_omap3_common.h>
#define CONFIG_OMAP3_LOGIC		/* working with Logic OMAP boards */
/*
 * Display CPU and Board information
 */

#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO

/* Clock Defines */
#define V_OSCK			26000000	/* Clock output from T2 */
#define V_SCLK			(V_OSCK >> 1)

#define CONFIG_MISC_INIT_R		/* misc_init_r dumps the die id */

#define CONFIG_CMDLINE_TAG			/* enable passing of ATAGs */
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG
#define CONFIG_REVISION_TAG

#define CONFIG_CMDLINE_EDITING			/* cmd line edit/history */
#define CONFIG_ZERO_BOOTDELAY_CHECK		/* check keypress w/no delay */

/*
 * Size of malloc() pool
 */
#define CONFIG_ENV_SIZE			(128 << 10)	/* 128 KiB */
						/* Sector */
/*
 * Hardware drivers
 */

/*
 * select serial console configuration
 */
#undef CONFIG_CONS_INDEX
#define CONFIG_CONS_INDEX		1
#define CONFIG_SYS_NS16550_COM1		OMAP34XX_UART1
#define CONFIG_SERIAL1			1	/* UART1 on OMAP Logic boards */

/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_BAUDRATE			115200
#define CONFIG_SYS_BAUDRATE_TABLE	{4800, 9600, 19200, 38400, 57600,\
					115200}
#define CONFIG_GENERIC_MMC
#define CONFIG_MMC
#define CONFIG_OMAP_HSMMC
#define CONFIG_DOS_PARTITION

/* commands to include */
#define CONFIG_CMD_CACHE
#define CONFIG_CMD_EXT2		/* EXT2 Support			*/
#define CONFIG_CMD_FAT		/* FAT support			*/
#define CONFIG_CMD_MTDPARTS	/* Enable MTD parts commands */
#define CONFIG_MTD_DEVICE	/* needed for mtdparts commands */
#define MTDIDS_DEFAULT			"nand0=omap2-nand.0"
#define MTDPARTS_DEFAULT		"mtdparts=omap2-nand.0:512k(x-loader),"\
					"1920k(u-boot),128k(u-boot-env),"\
					"4m(kernel),-(fs)"

#define CONFIG_CMD_I2C		/* I2C serial bus support	*/
#define CONFIG_CMD_MMC		/* MMC support			*/
#define CONFIG_CMD_NAND		/* NAND support			*/
#define CONFIG_CMD_NAND_LOCK_UNLOCK	/* nand (un)lock commands	*/
#define CONFIG_CMD_PING
#define CONFIG_CMD_DHCP

#define CONFIG_SYS_NO_FLASH

/*
 * I2C
 */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_OMAP24_I2C_SPEED	100000
#define CONFIG_SYS_OMAP24_I2C_SLAVE	1
#define CONFIG_SYS_I2C_OMAP34XX

/*
 * TWL4030
 */


/*
 * Board NAND Info.
 */
#define CONFIG_SYS_NAND_BASE            NAND_BASE
#define CONFIG_NAND_OMAP_GPMC
#define CONFIG_SYS_NAND_ADDR		NAND_BASE	/* physical address */
							/* to access nand */


#define CONFIG_SYS_MAX_NAND_DEVICE	1		/* Max number of */
							/* NAND devices */
#define CONFIG_SYS_NAND_BUSWIDTH_16BIT


/* Environment information */

/*
 * PREBOOT assumes the 4.3" display is attached.  User can interrupt
 * and modify display variable to suit their needs.
 */
#define CONFIG_PREBOOT \
	"echo ======================NOTICE============================;"\
	"echo \"The u-boot environment is not set.\";"			\
	"echo \"If using a display a valid display varible for your panel\";" \
	"echo \"needs to be set.\";"					\
	"echo \"Valid display options are:\";"				\
	"echo \"  2 == LQ121S1DG31     TFT SVGA    (12.1)  Sharp\";"	\
	"echo \"  3 == LQ036Q1DA01     TFT QVGA    (3.6)   Sharp w/ASIC\";" \
	"echo \"  5 == LQ064D343       TFT VGA     (6.4)   Sharp\";"	\
	"echo \"  7 == LQ10D368        TFT VGA     (10.4)  Sharp\";"	\
	"echo \" 15 == LQ043T1DG01     TFT WQVGA   (4.3)   Sharp (DEFAULT)\";" \
	"echo \" vga[-dvi or -hdmi]    LCD VGA     640x480\";"          \
	"echo \" svga[-dvi or -hdmi]   LCD SVGA    800x600\";"          \
	"echo \" xga[-dvi or -hdmi]    LCD XGA     1024x768\";"         \
	"echo \" 720p[-dvi or -hdmi]   LCD 720P    1280x720\";"         \
	"echo \"Defaulting to 4.3 LCD panel (display=15).\";"		\
	"setenv display 15;"						\
	"setenv preboot;"						\
	"saveenv;"


#define CONFIG_EXTRA_ENV_SETTINGS \
	"loadaddr=0x81000000\0" \
	"bootfile=uImage\0" \
	"mtdids=" MTDIDS_DEFAULT "\0"	\
	"mtdparts=" MTDPARTS_DEFAULT "\0" \
	"mmcdev=0\0" \
	"autoboot=mmc dev ${mmcdev}; if mmc rescan; then " \
			"if run loadbootscript; then " \
				"run bootscript; " \
			"else " \
				"run defaultboot;" \
			"fi; " \
		"else run defaultboot; fi\0" \
	"defaultboot=run mmcramboot\0" \
	"consoledevice=ttyO0\0" \
	"display=15\0" \
	"setconsole=setenv console ${consoledevice},${baudrate}n8\0" \
	"dump_bootargs=echo 'Bootargs: '; echo $bootargs\0" \
	"rotation=0\0" \
	"vrfb_arg=if itest ${rotation} -ne 0; then " \
		"setenv bootargs ${bootargs} omapfb.vrfb=y " \
		"omapfb.rotate=${rotation}; " \
		"fi\0" \
	"otherbootargs=ignore_loglevel early_printk no_console_suspend\0" \
	"addmtdparts=setenv bootargs ${bootargs} ${mtdparts}\0" \
	"common_bootargs=setenv bootargs ${bootargs} display=${display} " \
		"${otherbootargs};" \
		"run addmtdparts; " \
		"run vrfb_arg\0" \
	"loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
	"bootscript=echo 'Running bootscript from mmc ...'; " \
		"source ${loadaddr}\0" \
	"loaduimage=mmc rescan ${mmcdev}; " \
		"fatload mmc ${mmcdev} ${loadaddr} ${bootfile}\0" \
	"ramdisksize=64000\0" \
	"ramdiskaddr=0x82000000\0" \
	"ramdiskimage=rootfs.ext2.gz.uboot\0" \
	"ramargs=run setconsole; setenv bootargs console=${console} " \
		"root=/dev/ram rw ramdisk_size=${ramdisksize}\0" \
	"mmcramboot=echo 'Booting kernel from mmc w/ramdisk...'; " \
		"run ramargs; " \
		"run common_bootargs; " \
		"run dump_bootargs; " \
		"run loaduimage; " \
		"fatload mmc ${mmcdev} ${ramdiskaddr} ${ramdiskimage}; "\
		"bootm ${loadaddr} ${ramdiskaddr}\0" \
	"ramboot=echo 'Booting kernel/ramdisk rootfs from tftp...'; " \
		"run ramargs; " \
		"run common_bootargs; " \
		"run dump_bootargs; " \
		"tftpboot ${loadaddr} ${bootfile}; "\
		"tftpboot ${ramdiskaddr} ${ramdiskimage}; "\
		"bootm ${loadaddr} ${ramdiskaddr}\0"

#define CONFIG_BOOTCOMMAND \
	"run autoboot"

#define CONFIG_AUTO_COMPLETE
/*
 * Miscellaneous configurable options
 */
#define CONFIG_SYS_LONGHELP		/* undef to save memory */
#define CONFIG_SYS_HUSH_PARSER		/* use "hush" command parser */
#define CONFIG_SYS_CBSIZE		512	/* Console I/O Buffer Size */
/* Print Buffer Size */
#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
					sizeof(CONFIG_SYS_PROMPT) + 16)


/* memtest works on */
#define CONFIG_SYS_MEMTEST_START	(OMAP34XX_SDRC_CS0)
#define CONFIG_SYS_MEMTEST_END		(OMAP34XX_SDRC_CS0 + \
					0x01F00000) /* 31MB */

/*
 * OMAP3 has 12 GP timers, they can be driven by the system clock
 * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
 * This rate is divided by a local divisor.
 */
#define CONFIG_SYS_TIMERBASE		(OMAP34XX_GPT2)
#define CONFIG_SYS_PTV			2	/* Divisor: 2^(PTV+1) => 8 */

/*
 * Physical Memory Map
 */
#define CONFIG_NR_DRAM_BANKS	2	/* CS1 may or may not be populated */
#define PHYS_SDRAM_1		OMAP34XX_SDRC_CS0
#define PHYS_SDRAM_2		OMAP34XX_SDRC_CS1

/*
 * FLASH and environment organization
 */

/* **** PISMO SUPPORT *** */
#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 2 sectors */

#if defined(CONFIG_CMD_NAND)
#define CONFIG_SYS_FLASH_BASE		NAND_BASE
#elif defined(CONFIG_CMD_ONENAND)
#define CONFIG_SYS_FLASH_BASE		ONENAND_MAP
#endif

/* Monitor at start of flash */
#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_FLASH_BASE

#define SMNAND_ENV_OFFSET		0x260000 /* environment starts here */

#if defined(CONFIG_CMD_NAND)
#define CONFIG_NAND_OMAP_GPMC
#define CONFIG_ENV_IS_IN_NAND
#define CONFIG_ENV_OFFSET		SMNAND_ENV_OFFSET
#endif

#define CONFIG_SYS_ENV_SECT_SIZE	(128 << 10)	/* 128 KiB */
#define CONFIG_ENV_ADDR			CONFIG_ENV_OFFSET

#define CONFIG_SYS_INIT_RAM_ADDR	0x4020f800
#define CONFIG_SYS_INIT_RAM_SIZE	0x800

/*
 * SMSC922x Ethernet
 */
#if defined(CONFIG_CMD_NET)

#define CONFIG_SMC911X
#define CONFIG_SMC911X_16_BIT
#define CONFIG_SMC911X_BASE	0x08000000

#endif /* (CONFIG_CMD_NET) */

#endif /* __CONFIG_H */
Commit	Line	Data
86887f8e PB	1	/*
	2	* (C) Copyright 2011 Logic Product Development <www.logicpd.com>
	3	* Peter Barada <peter.barada@logicpd.com>
	4	*
	5	* Configuration settings for the Logic OMAP35x/DM37x SOM LV/Torpedo
	6	* reference boards.
	7	*
3765b3e7	8	* SPDX-License-Identifier: GPL-2.0+
86887f8e PB	9	*/
	10
	11	#ifndef __CONFIG_H
	12	#define __CONFIG_H
	13
	14	/*
	15	* High Level Configuration Options
	16	*/
86887f8e	17
7b77b1f6	18	#define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */
86887f8e PB	19	#define CONFIG_SYS_TEXT_BASE 0x80400000
86887f8e PB	20
7b77b1f6 AF	21	#include <configs/ti_omap3_common.h>
7b77b1f6 AF	22	#define CONFIG_OMAP3_LOGIC /* working with Logic OMAP boards */
86887f8e PB	23	/*
	24	* Display CPU and Board information
	25	*/
7b77b1f6	26
86887f8e PB	27	#define CONFIG_DISPLAY_CPUINFO
	28	#define CONFIG_DISPLAY_BOARDINFO
	29
	30	/* Clock Defines */
	31	#define V_OSCK 26000000 /* Clock output from T2 */
	32	#define V_SCLK (V_OSCK >> 1)
	33
	34	#define CONFIG_MISC_INIT_R /* misc_init_r dumps the die id */
	35
	36	#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
	37	#define CONFIG_SETUP_MEMORY_TAGS
	38	#define CONFIG_INITRD_TAG
	39	#define CONFIG_REVISION_TAG
	40
	41	#define CONFIG_CMDLINE_EDITING /* cmd line edit/history */
	42	#define CONFIG_ZERO_BOOTDELAY_CHECK /* check keypress w/no delay */
	43
	44	/*
	45	* Size of malloc() pool
	46	*/
	47	#define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */
	48	/* Sector */
86887f8e PB	49	/*
	50	* Hardware drivers
	51	*/
	52
86887f8e PB	53	/*
	54	* select serial console configuration
	55	*/
7b77b1f6	56	#undef CONFIG_CONS_INDEX
86887f8e PB	57	#define CONFIG_CONS_INDEX 1
	58	#define CONFIG_SYS_NS16550_COM1 OMAP34XX_UART1
	59	#define CONFIG_SERIAL1 1 /* UART1 on OMAP Logic boards */
	60
	61	/* allow to overwrite serial and ethaddr */
	62	#define CONFIG_ENV_OVERWRITE
	63	#define CONFIG_BAUDRATE 115200
	64	#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\
	65	115200}
	66	#define CONFIG_GENERIC_MMC
	67	#define CONFIG_MMC
	68	#define CONFIG_OMAP_HSMMC
	69	#define CONFIG_DOS_PARTITION
	70
	71	/* commands to include */
86887f8e PB	72	#define CONFIG_CMD_CACHE
	73	#define CONFIG_CMD_EXT2 /* EXT2 Support */
	74	#define CONFIG_CMD_FAT /* FAT support */
86887f8e PB	75	#define CONFIG_CMD_MTDPARTS /* Enable MTD parts commands */
	76	#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
	77	#define MTDIDS_DEFAULT "nand0=omap2-nand.0"
	78	#define MTDPARTS_DEFAULT "mtdparts=omap2-nand.0:512k(x-loader),"\
	79	"1920k(u-boot),128k(u-boot-env),"\
	80	"4m(kernel),-(fs)"
	81
	82	#define CONFIG_CMD_I2C /* I2C serial bus support */
	83	#define CONFIG_CMD_MMC /* MMC support */
	84	#define CONFIG_CMD_NAND /* NAND support */
	85	#define CONFIG_CMD_NAND_LOCK_UNLOCK /* nand (un)lock commands */
86887f8e PB	86	#define CONFIG_CMD_PING
86887f8e PB	87	#define CONFIG_CMD_DHCP
86887f8e	88
86887f8e PB	89	#define CONFIG_SYS_NO_FLASH
	90
	91	/*
	92	* I2C
	93	*/
6789e84e HS	94	#define CONFIG_SYS_I2C
	95	#define CONFIG_SYS_OMAP24_I2C_SPEED 100000
	96	#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
	97	#define CONFIG_SYS_I2C_OMAP34XX
86887f8e PB	98
	99	/*
	100	* TWL4030
	101	*/
7b77b1f6	102
86887f8e PB	103
	104	/*
	105	* Board NAND Info.
	106	*/
7b77b1f6	107	#define CONFIG_SYS_NAND_BASE NAND_BASE
86887f8e PB	108	#define CONFIG_NAND_OMAP_GPMC
	109	#define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */
	110	/* to access nand */
7b77b1f6	111
86887f8e PB	112
	113	#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of */
	114	/* NAND devices */
55f1b39f	115	#define CONFIG_SYS_NAND_BUSWIDTH_16BIT
7b77b1f6	116
86887f8e PB	117
86887f8e PB	118	/* Environment information */
86887f8e PB	119
	120	/*
	121	* PREBOOT assumes the 4.3" display is attached. User can interrupt
	122	* and modify display variable to suit their needs.
	123	*/
	124	#define CONFIG_PREBOOT \
	125	"echo ======================NOTICE============================;"\
	126	"echo \"The u-boot environment is not set.\";" \
	127	"echo \"If using a display a valid display varible for your panel\";" \
	128	"echo \"needs to be set.\";" \
	129	"echo \"Valid display options are:\";" \
	130	"echo \" 2 == LQ121S1DG31 TFT SVGA (12.1) Sharp\";" \
	131	"echo \" 3 == LQ036Q1DA01 TFT QVGA (3.6) Sharp w/ASIC\";" \
	132	"echo \" 5 == LQ064D343 TFT VGA (6.4) Sharp\";" \
	133	"echo \" 7 == LQ10D368 TFT VGA (10.4) Sharp\";" \
	134	"echo \" 15 == LQ043T1DG01 TFT WQVGA (4.3) Sharp (DEFAULT)\";" \
	135	"echo \" vga[-dvi or -hdmi] LCD VGA 640x480\";" \
	136	"echo \" svga[-dvi or -hdmi] LCD SVGA 800x600\";" \
	137	"echo \" xga[-dvi or -hdmi] LCD XGA 1024x768\";" \
	138	"echo \" 720p[-dvi or -hdmi] LCD 720P 1280x720\";" \
	139	"echo \"Defaulting to 4.3 LCD panel (display=15).\";" \
	140	"setenv display 15;" \
	141	"setenv preboot;" \
	142	"saveenv;"
	143
	144
	145	#define CONFIG_EXTRA_ENV_SETTINGS \
	146	"loadaddr=0x81000000\0" \
	147	"bootfile=uImage\0" \
	148	"mtdids=" MTDIDS_DEFAULT "\0" \
	149	"mtdparts=" MTDPARTS_DEFAULT "\0" \
	150	"mmcdev=0\0" \
66968110	151	"autoboot=mmc dev ${mmcdev}; if mmc rescan; then " \
86887f8e PB	152	"if run loadbootscript; then " \
	153	"run bootscript; " \
	154	"else " \
	155	"run defaultboot;" \
	156	"fi; " \
	157	"else run defaultboot; fi\0" \
	158	"defaultboot=run mmcramboot\0" \
	159	"consoledevice=ttyO0\0" \
	160	"display=15\0" \
	161	"setconsole=setenv console ${consoledevice},${baudrate}n8\0" \
	162	"dump_bootargs=echo 'Bootargs: '; echo $bootargs\0" \
	163	"rotation=0\0" \
	164	"vrfb_arg=if itest ${rotation} -ne 0; then " \
	165	"setenv bootargs ${bootargs} omapfb.vrfb=y " \
	166	"omapfb.rotate=${rotation}; " \
	167	"fi\0" \
	168	"otherbootargs=ignore_loglevel early_printk no_console_suspend\0" \
	169	"addmtdparts=setenv bootargs ${bootargs} ${mtdparts}\0" \
	170	"common_bootargs=setenv bootargs ${bootargs} display=${display} " \
	171	"${otherbootargs};" \
	172	"run addmtdparts; " \
	173	"run vrfb_arg\0" \
	174	"loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
	175	"bootscript=echo 'Running bootscript from mmc ...'; " \
	176	"source ${loadaddr}\0" \
	177	"loaduimage=mmc rescan ${mmcdev}; " \
	178	"fatload mmc ${mmcdev} ${loadaddr} ${bootfile}\0" \
	179	"ramdisksize=64000\0" \
	180	"ramdiskaddr=0x82000000\0" \
	181	"ramdiskimage=rootfs.ext2.gz.uboot\0" \
	182	"ramargs=run setconsole; setenv bootargs console=${console} " \
	183	"root=/dev/ram rw ramdisk_size=${ramdisksize}\0" \
	184	"mmcramboot=echo 'Booting kernel from mmc w/ramdisk...'; " \
	185	"run ramargs; " \
	186	"run common_bootargs; " \
	187	"run dump_bootargs; " \
	188	"run loaduimage; " \
	189	"fatload mmc ${mmcdev} ${ramdiskaddr} ${ramdiskimage}; "\
	190	"bootm ${loadaddr} ${ramdiskaddr}\0" \
	191	"ramboot=echo 'Booting kernel/ramdisk rootfs from tftp...'; " \
	192	"run ramargs; " \
	193	"run common_bootargs; " \
	194	"run dump_bootargs; " \
	195	"tftpboot ${loadaddr} ${bootfile}; "\
	196	"tftpboot ${ramdiskaddr} ${ramdiskimage}; "\
	197	"bootm ${loadaddr} ${ramdiskaddr}\0"
	198
	199	#define CONFIG_BOOTCOMMAND \
	200	"run autoboot"
	201
	202	#define CONFIG_AUTO_COMPLETE
	203	/*
	204	* Miscellaneous configurable options
	205	*/
	206	#define CONFIG_SYS_LONGHELP /* undef to save memory */
	207	#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
86887f8e PB	208	#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
	209	/* Print Buffer Size */
	210	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
	211	sizeof(CONFIG_SYS_PROMPT) + 16)
7b77b1f6 AF	212
7b77b1f6 AF	213
86887f8e PB	214	/* memtest works on */
	215	#define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0)
	216	#define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + \
	217	0x01F00000) /* 31MB */
	218
86887f8e PB	219	/*
	220	* OMAP3 has 12 GP timers, they can be driven by the system clock
	221	* (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
	222	* This rate is divided by a local divisor.
	223	*/
	224	#define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2)
	225	#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
86887f8e	226
86887f8e PB	227	/*
	228	* Physical Memory Map
	229	*/
	230	#define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */
	231	#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0
	232	#define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1
	233
	234	/*
	235	* FLASH and environment organization
	236	*/
	237
	238	/* ** PISMO SUPPORT * */
86887f8e PB	239	#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */
	240
	241	#if defined(CONFIG_CMD_NAND)
222a3113	242	#define CONFIG_SYS_FLASH_BASE NAND_BASE
86887f8e	243	#elif defined(CONFIG_CMD_ONENAND)
222a3113	244	#define CONFIG_SYS_FLASH_BASE ONENAND_MAP
86887f8e PB	245	#endif
	246
	247	/* Monitor at start of flash */
	248	#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
	249
	250	#define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */
	251
	252	#if defined(CONFIG_CMD_NAND)
	253	#define CONFIG_NAND_OMAP_GPMC
86887f8e PB	254	#define CONFIG_ENV_IS_IN_NAND
	255	#define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET
	256	#endif
	257
	258	#define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */
	259	#define CONFIG_ENV_ADDR CONFIG_ENV_OFFSET
	260
86887f8e PB	261	#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800
86887f8e PB	262	#define CONFIG_SYS_INIT_RAM_SIZE 0x800
86887f8e PB	263
	264	/*
	265	* SMSC922x Ethernet
	266	*/
	267	#if defined(CONFIG_CMD_NET)
	268
	269	#define CONFIG_SMC911X
	270	#define CONFIG_SMC911X_16_BIT
	271	#define CONFIG_SMC911X_BASE 0x08000000
	272
	273	#endif /* (CONFIG_CMD_NET) */
	274
86887f8e	275	#endif /* __CONFIG_H */