[people/ms/u-boot.git] / include / configs / omap3_sdp3430.h

/*
 * (C) Copyright 2006-2009
 * Texas Instruments Incorporated.
 * Richard Woodruff <r-woodruff2@ti.com>
 * Syed Mohammed Khasim <x0khasim@ti.com>
 * Nishanth Menon <nm@ti.com>
 *
 * Configuration settings for the 3430 TI SDP3430 board.
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

#ifndef __CONFIG_H
#define __CONFIG_H

/* TODO: REMOVE THE FOLLOWING
 * Retained the following till size.h is removed in u-boot
 */
#include <asm/sizes.h>
/*
 * High Level Configuration Options
 */
#define CONFIG_OMAP		1	/* in a TI OMAP core */
#define CONFIG_OMAP34XX		1	/* which is a 34XX */
#define CONFIG_OMAP3_3430SDP	1	/* working with SDP Rev2 */

#define CONFIG_SDRC	/* The chip has SDRC controller */

#include <asm/arch/cpu.h>		/* get chip and board defs */
#include <asm/arch/omap3.h>

/*
 * NOTE:  these #defines presume standard SDP jumper settings.
 * In particular:
 *  - 26 MHz clock (not 19.2 or 38.4 MHz)
 *  - Boot from 128MB NOR, not NAND or OneNAND
 *
 * At this writing, OMAP3 U-Boot support doesn't permit concurrent
 * support for all the flash types the board supports.
 */
#define CONFIG_DISPLAY_CPUINFO		1
#define CONFIG_DISPLAY_BOARDINFO	1

/* Clock Defines */
#define V_OSCK			26000000	/* Clock output from T2 */
#define V_SCLK			(V_OSCK >> 1)

#define CONFIG_MISC_INIT_R

#define CONFIG_CMDLINE_TAG		1	/* enable passing of ATAGs */
#define CONFIG_SETUP_MEMORY_TAGS	1
#define CONFIG_INITRD_TAG		1
#define CONFIG_REVISION_TAG		1

#define CONFIG_OF_LIBFDT		1

/*
 * Size of malloc() pool
 * Total Size Environment - 256k
 * Malloc - add 256k
 */
#define CONFIG_ENV_SIZE			(256 << 10)
#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (256 << 10))

/*--------------------------------------------------------------------------*/

/*
 * Hardware drivers
 */

/*
 * TWL4030
 */
#define CONFIG_TWL4030_POWER		1

/*
 * serial port - NS16550 compatible
 */
#define V_NS16550_CLK			48000000	/* 48MHz (APLL96/2) */

#define CONFIG_SYS_NS16550
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE	(-4)
#define CONFIG_SYS_NS16550_CLK		V_NS16550_CLK

/* Original SDP u-boot used UART1 and thus J8 (innermost); that can be
 * swapped with UART2 via jumpering.  Downsides of using J8:  it doesn't
 * support UART boot (that's only for UART3); it prevents sharing a Linux
 * kernel (LL_DEBUG_UART3) or filesystem (getty ttyS2) with most boards.
 *
 * UART boot uses UART3 on J9, and the SDP user's guide says to use
 * that for console.  Downsides of using J9:  you can't use IRDA too;
 * since UART3 isn't in the CORE power domain, it may be a bit less
 * usable in certain PM-sensitive debug scenarios.
 */
#undef CONSOLE_J9			/* else J8/UART1 (innermost) */

#ifdef CONSOLE_J9
#define CONFIG_CONS_INDEX		3
#define CONFIG_SYS_NS16550_COM3		OMAP34XX_UART3
#define CONFIG_SERIAL3			3	/* UART3 */
#else
#define CONFIG_CONS_INDEX		1
#define CONFIG_SYS_NS16550_COM1		OMAP34XX_UART1
#define CONFIG_SERIAL1			1	/* UART1 */
#endif

#define CONFIG_ENV_OVERWRITE
#define CONFIG_BAUDRATE			115200
#define CONFIG_SYS_BAUDRATE_TABLE	{4800, 9600, 19200, 38400, 57600,\
					115200}

/*
 * I2C for power management setup
 */
#define CONFIG_HARD_I2C			1
#define CONFIG_SYS_I2C_SPEED		100000
#define CONFIG_SYS_I2C_SLAVE		1
#define CONFIG_SYS_I2C_BUS		0
#define CONFIG_SYS_I2C_BUS_SELECT	1
#define CONFIG_DRIVER_OMAP34XX_I2C	1

/* OMITTED:  single 1 Gbit MT29F1G NAND flash */

/*
 * NOR boot support - single 1 Gbit PF48F6000M0 Strataflash
 */
#define CONFIG_SYS_FLASH_BASE		0x10000000
#define CONFIG_FLASH_CFI_DRIVER		1	/* Use drivers/cfi_flash.c */
#define CONFIG_SYS_FLASH_CFI		1	/* use CFI geometry data */
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1	/* ~10x faster writes */
#define CONFIG_SYS_FLASH_PROTECTION	1	/* hardware sector protection */
#define CONFIG_SYS_FLASH_EMPTY_INFO	1	/* flinfo 'E' for empty */
#define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE}
#define CONFIG_SYS_MAX_FLASH_BANKS      1	/* max number of flash banks */

#define CONFIG_SYS_FLASH_CFI_WIDTH	2
#define PHYS_FLASH_SIZE			(128 << 20)
#define CONFIG_SYS_MAX_FLASH_SECT	512	/* max sectors on one chip */

/* OMITTED:  single 2 Gbit KFM2G16 OneNAND flash */

#define CONFIG_ENV_IS_IN_FLASH		1
#define CONFIG_SYS_ENV_SECT_SIZE	(256 << 10)
#define CONFIG_ENV_OFFSET		CONFIG_SYS_ENV_SECT_SIZE
#define CONFIG_ENV_ADDR	(CONFIG_SYS_FLASH_BASE + CONFIG_SYS_ENV_SECT_SIZE)
/*--------------------------------------------------------------------------*/

/* commands to include */
#include <config_cmd_default.h>

/* Enabled commands */
#define CONFIG_CMD_DHCP		/* DHCP Support			*/
#define CONFIG_CMD_EXT2		/* EXT2 Support			*/
#define CONFIG_CMD_FAT		/* FAT support			*/
#define CONFIG_CMD_I2C		/* I2C serial bus support	*/
#define CONFIG_CMD_JFFS2	/* JFFS2 Support		*/
#define CONFIG_CMD_MMC		/* MMC support			*/
#define CONFIG_CMD_NET

/* Disabled commands */
#undef CONFIG_CMD_FPGA		/* FPGA configuration Support	*/
#undef CONFIG_CMD_IMLS		/* List all found images	*/

/*--------------------------------------------------------------------------*/
/*
 * MMC boot support
 */

#if defined(CONFIG_CMD_MMC)
#define CONFIG_GENERIC_MMC		1
#define CONFIG_MMC			1
#define CONFIG_OMAP_HSMMC		1
#define CONFIG_DOS_PARTITION		1
#endif

/*----------------------------------------------------------------------------
 * SMSC9115 Ethernet from SMSC9118 family
 *----------------------------------------------------------------------------
 */
#if defined(CONFIG_CMD_NET)

#define CONFIG_LAN91C96
#define CONFIG_LAN91C96_BASE	DEBUG_BASE
#define CONFIG_LAN91C96_EXT_PHY

#define CONFIG_BOOTP_SEND_HOSTNAME
/*
 * BOOTP fields
 */
#define CONFIG_BOOTP_SUBNETMASK		0x00000001
#define CONFIG_BOOTP_GATEWAY		0x00000002
#define CONFIG_BOOTP_HOSTNAME		0x00000004
#define CONFIG_BOOTP_BOOTPATH		0x00000010
#endif /* (CONFIG_CMD_NET) */

/*
 * Environment setup
 *
 * Default boot order:  mmc bootscript, MMC uImage, NOR image.
 * Network booting environment must be configured at site.
 */

/* allow overwriting serial config and ethaddr */
#define CONFIG_ENV_OVERWRITE

#define CONFIG_EXTRA_ENV_SETTINGS \
	"loadaddr=0x82000000\0" \
	"console=ttyS0,115200n8\0" \
	"mmcargs=setenv bootargs console=${console} " \
		"root=/dev/mmcblk0p2 rw " \
		"rootfstype=ext3 rootwait\0" \
	"norargs=setenv bootargs console=${console} " \
		"root=/dev/mtdblock3 rw " \
		"rootfstype=jffs2\0" \
	"loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \
	"bootscript=echo Running bootscript from MMC/SD ...; " \
		"autoscr ${loadaddr}\0" \
	"loaduimage=fatload mmc 0 ${loadaddr} uImage\0" \
	"mmcboot=echo Booting from MMC/SD ...; " \
		"run mmcargs; " \
		"bootm ${loadaddr}\0" \
	"norboot=echo Booting from NOR ...; " \
		"run norargs; " \
		"bootm 0x80000\0" \

#define CONFIG_BOOTCOMMAND \
	"if mmcinit; then " \
		"if run loadbootscript; then " \
			"run bootscript; " \
		"else " \
			"if run loaduimage; then " \
				"run mmcboot; " \
			"else run norboot; " \
			"fi; " \
		"fi; " \
	"else run norboot; fi"

#define CONFIG_AUTO_COMPLETE		1

/*--------------------------------------------------------------------------*/

/*
 * Miscellaneous configurable options
 */

#define CONFIG_SYS_LONGHELP		/* undef to save memory */
#define CONFIG_SYS_HUSH_PARSER		/* use "hush" command parser */
#define CONFIG_SYS_PROMPT		"OMAP34XX SDP # "
#define CONFIG_SYS_CBSIZE		512	/* Console I/O Buffer Size */
/* Print Buffer Size */
#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
					sizeof(CONFIG_SYS_PROMPT) + 16)
#define CONFIG_SYS_MAXARGS		16	/* max number of command args */
/* Boot Argument Buffer Size */
#define CONFIG_SYS_BARGSIZE		(CONFIG_SYS_CBSIZE)

/* SDRAM Test range - start at 16 meg boundary -ends at 32Meg -
 * a basic sanity check ONLY
 * IF you would like to increase coverage, increase the end address
 * or run the test with custom options
 */
#define CONFIG_SYS_MEMTEST_START	(OMAP34XX_SDRC_CS0 + 0x01000000)
#define CONFIG_SYS_MEMTEST_END		(OMAP34XX_SDRC_CS0 + (32 << 20))

/* Default load address */
#define CONFIG_SYS_LOAD_ADDR		(OMAP34XX_SDRC_CS0)

/*--------------------------------------------------------------------------*/

/*
 * 3430 has 12 GP timers, they can be driven by the SysClk (12/13/19.2) or by
 * 32KHz clk, or from external sig. This rate is divided by a local divisor.
 */
#define CONFIG_SYS_TIMERBASE		(OMAP34XX_GPT2)
#define CONFIG_SYS_PTV			2	/* Divisor: 2^(PTV+1) => 8 */
#define CONFIG_SYS_HZ			1000

#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
#define CONFIG_SYS_INIT_RAM_ADDR	0x4020f800
#define CONFIG_SYS_INIT_RAM_SIZE	0x800
#define CONFIG_SYS_INIT_SP_ADDR		(CONFIG_SYS_INIT_RAM_ADDR + \
					 CONFIG_SYS_INIT_RAM_SIZE - \
					 GENERATED_GBL_DATA_SIZE)
/*
 * SDRAM Memory Map
 */
#define CONFIG_NR_DRAM_BANKS	2	/* CS1 may or may not be populated */
#define PHYS_SDRAM_1		OMAP34XX_SDRC_CS0
#define PHYS_SDRAM_1_SIZE	(32 << 20) /* at least 32 meg */
#define PHYS_SDRAM_2		OMAP34XX_SDRC_CS1

/*--------------------------------------------------------------------------*/

/*
 * NOR FLASH usage ... default nCS0:
 *  - one 256KB sector for U-Boot
 *  - one 256KB sector for its parameters (not all used)
 *  - eight sectors (2 MB) for kernel
 *  - rest for JFFS2
 */

/* Monitor at start of flash */
#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_FLASH_BASE
#define CONFIG_SYS_MONITOR_LEN		(256 << 10)

/*
 * NAND FLASH usage ... default nCS1:
 *  - four 128KB sectors for X-Loader
 *  - four 128KB sectors for U-Boot
 *  - two 128KB sector for its parameters
 *  - 32 sectors (4 MB) for kernel
 *  - rest for filesystem
 */

/*
 * OneNAND FLASH usage ... default nCS2:
 *  - four 128KB sectors for X-Loader
 *  - two 128KB sectors for U-Boot
 *  - one 128KB sector for its parameters
 *  - sixteen sectors (2 MB) for kernel
 *  - rest for filesystem
 */

#define CONFIG_SYS_CACHELINE_SIZE	64

#endif				/* __CONFIG_H */
Commit	Line	Data
e63e5904 TR	1	/*
	2	* (C) Copyright 2006-2009
	3	* Texas Instruments Incorporated.
	4	* Richard Woodruff <r-woodruff2@ti.com>
	5	* Syed Mohammed Khasim <x0khasim@ti.com>
	6	* Nishanth Menon <nm@ti.com>
	7	*
	8	* Configuration settings for the 3430 TI SDP3430 board.
	9	*
	10	* See file CREDITS for list of people who contributed to this
	11	* project.
	12	*
	13	* This program is free software; you can redistribute it and/or
	14	* modify it under the terms of the GNU General Public License as
	15	* published by the Free Software Foundation; either version 2 of
	16	* the License, or (at your option) any later version.
	17	*
	18	* This program is distributed in the hope that it will be useful,
	19	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	20	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	21	* GNU General Public License for more details.
	22	*
	23	* You should have received a copy of the GNU General Public License
	24	* along with this program; if not, write to the Free Software
	25	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	26	* MA 02111-1307 USA
	27	*/
	28
	29	#ifndef __CONFIG_H
	30	#define __CONFIG_H
	31
	32	/* TODO: REMOVE THE FOLLOWING
	33	* Retained the following till size.h is removed in u-boot
	34	*/
	35	#include <asm/sizes.h>
	36	/*
	37	* High Level Configuration Options
	38	*/
e63e5904 TR	39	#define CONFIG_OMAP 1 /* in a TI OMAP core */
e63e5904 TR	40	#define CONFIG_OMAP34XX 1 /* which is a 34XX */
e63e5904 TR	41	#define CONFIG_OMAP3_3430SDP 1 /* working with SDP Rev2 */
e63e5904 TR	42
cae377b5 VH	43	#define CONFIG_SDRC /* The chip has SDRC controller */
cae377b5 VH	44
e63e5904 TR	45	#include <asm/arch/cpu.h> /* get chip and board defs */
	46	#include <asm/arch/omap3.h>
	47
	48	/*
	49	* NOTE: these #defines presume standard SDP jumper settings.
	50	* In particular:
	51	* - 26 MHz clock (not 19.2 or 38.4 MHz)
	52	* - Boot from 128MB NOR, not NAND or OneNAND
	53	*
	54	* At this writing, OMAP3 U-Boot support doesn't permit concurrent
	55	* support for all the flash types the board supports.
	56	*/
	57	#define CONFIG_DISPLAY_CPUINFO 1
	58	#define CONFIG_DISPLAY_BOARDINFO 1
	59
	60	/* Clock Defines */
	61	#define V_OSCK 26000000 /* Clock output from T2 */
	62	#define V_SCLK (V_OSCK >> 1)
	63
e63e5904 TR	64	#define CONFIG_MISC_INIT_R
	65
	66	#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
	67	#define CONFIG_SETUP_MEMORY_TAGS 1
	68	#define CONFIG_INITRD_TAG 1
	69	#define CONFIG_REVISION_TAG 1
	70
2fa8ca98 GL	71	#define CONFIG_OF_LIBFDT 1
2fa8ca98 GL	72
e63e5904 TR	73	/*
	74	* Size of malloc() pool
	75	* Total Size Environment - 256k
	76	* Malloc - add 256k
	77	*/
	78	#define CONFIG_ENV_SIZE (256 << 10)
	79	#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (256 << 10))
e63e5904 TR	80
	81	/--------------------------------------------------------------------------/
	82
	83	/*
	84	* Hardware drivers
	85	*/
	86
	87	/*
	88	* TWL4030
	89	*/
	90	#define CONFIG_TWL4030_POWER 1
	91
	92	/*
	93	* serial port - NS16550 compatible
	94	*/
	95	#define V_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */
	96
	97	#define CONFIG_SYS_NS16550
	98	#define CONFIG_SYS_NS16550_SERIAL
	99	#define CONFIG_SYS_NS16550_REG_SIZE (-4)
	100	#define CONFIG_SYS_NS16550_CLK V_NS16550_CLK
	101
	102	/* Original SDP u-boot used UART1 and thus J8 (innermost); that can be
	103	* swapped with UART2 via jumpering. Downsides of using J8: it doesn't
	104	* support UART boot (that's only for UART3); it prevents sharing a Linux
	105	* kernel (LL_DEBUG_UART3) or filesystem (getty ttyS2) with most boards.
	106	*
	107	* UART boot uses UART3 on J9, and the SDP user's guide says to use
	108	* that for console. Downsides of using J9: you can't use IRDA too;
	109	* since UART3 isn't in the CORE power domain, it may be a bit less
	110	* usable in certain PM-sensitive debug scenarios.
	111	*/
	112	#undef CONSOLE_J9 /* else J8/UART1 (innermost) */
	113
	114	#ifdef CONSOLE_J9
	115	#define CONFIG_CONS_INDEX 3
	116	#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3
	117	#define CONFIG_SERIAL3 3 /* UART3 */
	118	#else
	119	#define CONFIG_CONS_INDEX 1
	120	#define CONFIG_SYS_NS16550_COM1 OMAP34XX_UART1
	121	#define CONFIG_SERIAL1 1 /* UART1 */
	122	#endif
	123
	124	#define CONFIG_ENV_OVERWRITE
	125	#define CONFIG_BAUDRATE 115200
	126	#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\
	127	115200}
	128
	129	/*
	130	* I2C for power management setup
	131	*/
	132	#define CONFIG_HARD_I2C 1
	133	#define CONFIG_SYS_I2C_SPEED 100000
	134	#define CONFIG_SYS_I2C_SLAVE 1
	135	#define CONFIG_SYS_I2C_BUS 0
	136	#define CONFIG_SYS_I2C_BUS_SELECT 1
	137	#define CONFIG_DRIVER_OMAP34XX_I2C 1
	138
	139	/* OMITTED: single 1 Gbit MT29F1G NAND flash */
	140
	141	/*
	142	* NOR boot support - single 1 Gbit PF48F6000M0 Strataflash
	143	*/
144	#define CONFIG_SYS_FLASH_BASE 0x10000000
145	#define CONFIG_FLASH_CFI_DRIVER 1 /* Use drivers/cfi_flash.c */
146	#define CONFIG_SYS_FLASH_CFI 1 /* use CFI geometry data */
147	#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* ~10x faster writes */
148	#define CONFIG_SYS_FLASH_PROTECTION 1 /* hardware sector protection */
149	#define CONFIG_SYS_FLASH_EMPTY_INFO 1 /* flinfo 'E' for empty */
150	#define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE}
151	#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of flash banks */
152
153	#define CONFIG_SYS_FLASH_CFI_WIDTH 2
154	#define PHYS_FLASH_SIZE (128 << 20)
155	#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max sectors on one chip */
156
e63e5904 TR	157	/* OMITTED: single 2 Gbit KFM2G16 OneNAND flash */
	158
	159	#define CONFIG_ENV_IS_IN_FLASH 1
	160	#define CONFIG_SYS_ENV_SECT_SIZE (256 << 10)
	161	#define CONFIG_ENV_OFFSET CONFIG_SYS_ENV_SECT_SIZE
	162	#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_ENV_SECT_SIZE)
	163	/--------------------------------------------------------------------------/
	164
	165	/* commands to include */
	166	#include <config_cmd_default.h>
	167
	168	/* Enabled commands */
	169	#define CONFIG_CMD_DHCP /* DHCP Support */
	170	#define CONFIG_CMD_EXT2 /* EXT2 Support */
	171	#define CONFIG_CMD_FAT /* FAT support */
	172	#define CONFIG_CMD_I2C /* I2C serial bus support */
	173	#define CONFIG_CMD_JFFS2 /* JFFS2 Support */
	174	#define CONFIG_CMD_MMC /* MMC support */
	175	#define CONFIG_CMD_NET
	176
	177	/* Disabled commands */
	178	#undef CONFIG_CMD_FPGA /* FPGA configuration Support */
	179	#undef CONFIG_CMD_IMLS /* List all found images */
	180
	181	/--------------------------------------------------------------------------/
	182	/*
	183	* MMC boot support
	184	*/
	185
	186	#if defined(CONFIG_CMD_MMC)
7cc862be	187	#define CONFIG_GENERIC_MMC 1
e63e5904	188	#define CONFIG_MMC 1
7cc862be	189	#define CONFIG_OMAP_HSMMC 1
e63e5904 TR	190	#define CONFIG_DOS_PARTITION 1
	191	#endif
	192
	193	/*----------------------------------------------------------------------------
	194	* SMSC9115 Ethernet from SMSC9118 family
	195	*----------------------------------------------------------------------------
	196	*/
	197	#if defined(CONFIG_CMD_NET)
	198
a1725999	199	#define CONFIG_LAN91C96
e63e5904 TR	200	#define CONFIG_LAN91C96_BASE DEBUG_BASE
	201	#define CONFIG_LAN91C96_EXT_PHY
	202
	203	#define CONFIG_BOOTP_SEND_HOSTNAME
	204	/*
	205	* BOOTP fields
	206	*/
	207	#define CONFIG_BOOTP_SUBNETMASK 0x00000001
	208	#define CONFIG_BOOTP_GATEWAY 0x00000002
	209	#define CONFIG_BOOTP_HOSTNAME 0x00000004
	210	#define CONFIG_BOOTP_BOOTPATH 0x00000010
	211	#endif /* (CONFIG_CMD_NET) */
	212
	213	/*
	214	* Environment setup
	215	*
	216	* Default boot order: mmc bootscript, MMC uImage, NOR image.
	217	* Network booting environment must be configured at site.
	218	*/
	219
	220	/* allow overwriting serial config and ethaddr */
	221	#define CONFIG_ENV_OVERWRITE
	222
	223	#define CONFIG_EXTRA_ENV_SETTINGS \
	224	"loadaddr=0x82000000\0" \
	225	"console=ttyS0,115200n8\0" \
	226	"mmcargs=setenv bootargs console=${console} " \
	227	"root=/dev/mmcblk0p2 rw " \
	228	"rootfstype=ext3 rootwait\0" \
	229	"norargs=setenv bootargs console=${console} " \
	230	"root=/dev/mtdblock3 rw " \
	231	"rootfstype=jffs2\0" \
	232	"loadbootscript=fatload mmc 0 ${loadaddr} boot.scr\0" \
	233	"bootscript=echo Running bootscript from MMC/SD ...; " \
	234	"autoscr ${loadaddr}\0" \
	235	"loaduimage=fatload mmc 0 ${loadaddr} uImage\0" \
	236	"mmcboot=echo Booting from MMC/SD ...; " \
	237	"run mmcargs; " \
	238	"bootm ${loadaddr}\0" \
	239	"norboot=echo Booting from NOR ...; " \
	240	"run norargs; " \
	241	"bootm 0x80000\0" \
	242
	243	#define CONFIG_BOOTCOMMAND \
	244	"if mmcinit; then " \
	245	"if run loadbootscript; then " \
	246	"run bootscript; " \
	247	"else " \
	248	"if run loaduimage; then " \
	249	"run mmcboot; " \
	250	"else run norboot; " \
	251	"fi; " \
	252	"fi; " \
	253	"else run norboot; fi"
	254
	255	#define CONFIG_AUTO_COMPLETE 1
	256
	257	/--------------------------------------------------------------------------/
	258
	259	/*
	260	* Miscellaneous configurable options
	261	*/
e63e5904 TR	262
	263	#define CONFIG_SYS_LONGHELP /* undef to save memory */
	264	#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
1270ec13	265	#define CONFIG_SYS_PROMPT "OMAP34XX SDP # "
f62b1257	266	#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
e63e5904 TR	267	/* Print Buffer Size */
	268	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
	269	sizeof(CONFIG_SYS_PROMPT) + 16)
	270	#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
	271	/* Boot Argument Buffer Size */
	272	#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE)
	273
	274	/* SDRAM Test range - start at 16 meg boundary -ends at 32Meg -
	275	* a basic sanity check ONLY
	276	* IF you would like to increase coverage, increase the end address
	277	* or run the test with custom options
	278	*/
	279	#define CONFIG_SYS_MEMTEST_START (OMAP34XX_SDRC_CS0 + 0x01000000)
	280	#define CONFIG_SYS_MEMTEST_END (OMAP34XX_SDRC_CS0 + (32 << 20))
	281
	282	/* Default load address */
	283	#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0)
	284
	285	/--------------------------------------------------------------------------/
	286
	287	/*
	288	* 3430 has 12 GP timers, they can be driven by the SysClk (12/13/19.2) or by
	289	* 32KHz clk, or from external sig. This rate is divided by a local divisor.
	290	*/
	291	#define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2)
	292	#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
	293	#define CONFIG_SYS_HZ 1000
	294
5ec789f6 DB	295	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
	296	#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800
	297	#define CONFIG_SYS_INIT_RAM_SIZE 0x800
	298	#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
	299	CONFIG_SYS_INIT_RAM_SIZE - \
	300	GENERATED_GBL_DATA_SIZE)
e63e5904 TR	301	/*
	302	* SDRAM Memory Map
	303	*/
	304	#define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */
	305	#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0
	306	#define PHYS_SDRAM_1_SIZE (32 << 20) /* at least 32 meg */
	307	#define PHYS_SDRAM_2 OMAP34XX_SDRC_CS1
	308
e63e5904 TR	309	/--------------------------------------------------------------------------/
	310
	311	/*
	312	* NOR FLASH usage ... default nCS0:
	313	* - one 256KB sector for U-Boot
	314	* - one 256KB sector for its parameters (not all used)
	315	* - eight sectors (2 MB) for kernel
	316	* - rest for JFFS2
	317	*/
	318
	319	/* Monitor at start of flash */
	320	#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
	321	#define CONFIG_SYS_MONITOR_LEN (256 << 10)
	322
e63e5904 TR	323	/*
	324	* NAND FLASH usage ... default nCS1:
	325	* - four 128KB sectors for X-Loader
	326	* - four 128KB sectors for U-Boot
	327	* - two 128KB sector for its parameters
	328	* - 32 sectors (4 MB) for kernel
	329	* - rest for filesystem
	330	*/
	331
	332	/*
	333	* OneNAND FLASH usage ... default nCS2:
	334	* - four 128KB sectors for X-Loader
	335	* - two 128KB sectors for U-Boot
	336	* - one 128KB sector for its parameters
	337	* - sixteen sectors (2 MB) for kernel
	338	* - rest for filesystem
	339	*/
	340
8e40852f A	341	#define CONFIG_SYS_CACHELINE_SIZE 64
8e40852f A	342
e63e5904	343	#endif /* __CONFIG_H */