[people/ms/u-boot.git] / include / configs / omap3_zoom1.h

/*
 * (C) Copyright 2006-2008
 * Texas Instruments.
 * Richard Woodruff <r-woodruff2@ti.com>
 * Syed Mohammed Khasim <x0khasim@ti.com>
 * Nishanth Menon <nm@ti.com>
 *
 * Configuration settings for the TI OMAP3430 Zoom MDK board.
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __CONFIG_H
#define __CONFIG_H

/*
 * High Level Configuration Options
 */
#define CONFIG_OMAP3_ZOOM1	1	/* working with Zoom MDK Rev1 */

#define CONFIG_NAND
#define CONFIG_NR_DRAM_BANKS	2	/* CS1 may or may not be populated */
#include <asm/arch/cpu.h>		/* get chip and board defs */
#include <asm/arch/omap.h>
#include <configs/ti_omap3_common.h>

/* Remove SPL boot option - we do not support that on LDP yet */
#undef CONFIG_SPL_FRAMEWORK
#undef CONFIG_SPL_OS_BOOT

/* Generic NAND definition conflicts with debug_base */
#undef CONFIG_SYS_NAND_BASE

/*
 * Display CPU and Board information
 */
#define CONFIG_DISPLAY_CPUINFO		1
#define CONFIG_DISPLAY_BOARDINFO	1

#define CONFIG_MISC_INIT_R

#define CONFIG_REVISION_TAG		1

#define CONFIG_ENV_SIZE			(128 << 10)	/* 128 KiB */

/*
 * Hardware drivers
 */

/* USB */
#define CONFIG_USB_MUSB_UDC			1
#define CONFIG_USB_OMAP3		1
#define CONFIG_TWL4030_USB		1

/* USB device configuration */
#define CONFIG_USB_DEVICE		1
#define CONFIG_USB_TTY			1
#define CONFIG_SYS_CONSOLE_IS_IN_ENV	1
/* Change these to suit your needs */
#define CONFIG_USBD_VENDORID		0x0451
#define CONFIG_USBD_PRODUCTID		0x5678
#define CONFIG_USBD_MANUFACTURER	"Texas Instruments"
#define CONFIG_USBD_PRODUCT_NAME	"Zoom1"

#define MTDIDS_DEFAULT			"nand0=nand"
#define MTDPARTS_DEFAULT		"mtdparts=nand:512k(x-loader),"\
					"1920k(u-boot),128k(u-boot-env),"\
					"4m(kernel),-(fs)"

#if defined(CONFIG_CMD_NAND)
/* NAND: SPL falcon mode configs */
#ifdef CONFIG_SPL_OS_BOOT
#define CONFIG_CMD_SPL_NAND_OFS		0x240000
#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS	0x280000
#define CONFIG_CMD_SPL_WRITE_SIZE	0x2000
#endif
#define CONFIG_CMD_NAND_LOCK_UNLOCK /* Enable lock/unlock support */
#endif

#define CONFIG_CMD_PING
#define CONFIG_CMD_DHCP

#undef CONFIG_SYS_I2C_OMAP24XX
#define CONFIG_SYS_I2C_OMAP34XX

/*
 * TWL4030
 */
#define CONFIG_TWL4030_LED		1

/*
 * Board NAND Info.
 */
#define CONFIG_SYS_NAND_ADDR		NAND_BASE	/* physical address */
							/* to access nand */
#define CONFIG_SYS_NAND_BASE		NAND_BASE	/* physical address */
							/* to access nand at */
							/* CS0 */
#define CONFIG_SYS_NAND_BUSWIDTH_16BIT

/* Environment information */

#define CONFIG_EXTRA_ENV_SETTINGS \
	"loadaddr=0x82000000\0" \
	"fdtaddr=0x80f80000\0" \
	"bootfile=uImage\0" \
	"fdtfile=omap3-ldp.dtb\0" \
	"bootdir=/\0" \
	"bootpart=0:1\0" \
	"usbtty=cdc_acm\0" \
	"console=ttyO2,115200n8\0" \
	"mmcdev=0\0" \
	"videomode=1024x768@60,vxres=1024,vyres=768\0" \
	"videospec=omapfb:vram:2M,vram:4M\0" \
	"mmcargs=setenv bootargs console=${console} " \
		"video=${videospec},mode:${videomode} " \
		"root=/dev/mmcblk0p2 rw " \
		"rootfstype=ext3 rootwait\0" \
	"nandargs=setenv bootargs console=${console} " \
		"video=${videospec},mode:${videomode} " \
		"root=/dev/mtdblock4 rw " \
		"rootfstype=jffs2\0" \
	"loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
	"bootscript=echo Running bootscript from mmc ...; " \
		"source ${loadaddr}\0" \
	"loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
	"loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
	"loadzimage=setenv bootfile zImage; if run loadimage; then run loadfdt;fi\0"\
	"mmcboot=echo Booting from mmc ...; " \
		"run mmcargs; " \
		"bootm ${loadaddr}\0" \
	"mmczboot=echo Booting from mmc ...; " \
		"run mmcargs; " \
		"bootz ${loadaddr} - ${fdtaddr}\0" \
	"nandboot=echo Booting from nand ...; " \
		"run nandargs; " \
		"nand read ${loadaddr} 280000 400000; " \
		"bootm ${loadaddr}\0" \

#define CONFIG_BOOTCOMMAND \
	"mmc dev ${mmcdev}; if mmc rescan; then " \
		"if run loadbootscript; then " \
			"run bootscript; " \
		"else " \
			"if run loadimage; then " \
				"run mmcboot; " \
			"else if run loadzimage; then " \
				"run mmczboot; " \
			"else run nandboot; " \
			"fi; fi;" \
		"fi; " \
	"else run nandboot; fi"

/*
 * Miscellaneous configurable options
 */
#define CONFIG_SYS_MEMTEST_START	(PHYS_SDRAM_1)	/* memtest */
#define CONFIG_SYS_MEMTEST_END		(PHYS_SDRAM_2 + \
					0x01F00000) /* 31MB */

/*-----------------------------------------------------------------------
 * FLASH and environment organization
 */

/* **** PISMO SUPPORT *** */
#if defined(CONFIG_CMD_NAND)
#define CONFIG_SYS_FLASH_BASE		NAND_BASE
#endif

/* Monitor at start of flash */
#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_FLASH_BASE
#define CONFIG_SYS_ONENAND_BASE		ONENAND_MAP

#define CONFIG_ENV_IS_IN_NAND		1
#define ONENAND_ENV_OFFSET		0x260000 /* environment starts here */
#define SMNAND_ENV_OFFSET		0x260000 /* environment starts here */

#define CONFIG_SYS_ENV_SECT_SIZE	(128 << 10)	/* 128 KiB */
#define CONFIG_ENV_OFFSET		SMNAND_ENV_OFFSET
#define CONFIG_ENV_ADDR			SMNAND_ENV_OFFSET

#define CONFIG_SYS_CACHELINE_SIZE	64

#ifdef CONFIG_CMD_NET
/* Ethernet (LAN9211 from SMSC9118 family) */
#define CONFIG_SMC911X
#define CONFIG_SMC911X_32_BIT
#define CONFIG_SMC911X_BASE		DEBUG_BASE

#endif

#endif				/* __CONFIG_H */
Commit	Line	Data
7379f45a DB	1	/*
	2	* (C) Copyright 2006-2008
	3	* Texas Instruments.
	4	* Richard Woodruff <r-woodruff2@ti.com>
	5	* Syed Mohammed Khasim <x0khasim@ti.com>
	6	* Nishanth Menon <nm@ti.com>
	7	*
	8	* Configuration settings for the TI OMAP3430 Zoom MDK board.
	9	*
3765b3e7	10	* SPDX-License-Identifier: GPL-2.0+
7379f45a DB	11	*/
	12
	13	#ifndef __CONFIG_H
	14	#define __CONFIG_H
7379f45a DB	15
	16	/*
	17	* High Level Configuration Options
	18	*/
7379f45a DB	19	#define CONFIG_OMAP3_ZOOM1 1 /* working with Zoom MDK Rev1 */
7379f45a DB	20
161d2d5e NM	21	#define CONFIG_NAND
161d2d5e NM	22	#define CONFIG_NR_DRAM_BANKS 2 /* CS1 may or may not be populated */
7379f45a	23	#include <asm/arch/cpu.h> /* get chip and board defs */
987ec585	24	#include <asm/arch/omap.h>
161d2d5e NM	25	#include <configs/ti_omap3_common.h>
	26
	27	/* Remove SPL boot option - we do not support that on LDP yet */
161d2d5e NM	28	#undef CONFIG_SPL_FRAMEWORK
	29	#undef CONFIG_SPL_OS_BOOT
	30
	31	/* Generic NAND definition conflicts with debug_base */
	32	#undef CONFIG_SYS_NAND_BASE
7379f45a	33
6a6b62e3 SP	34	/*
	35	* Display CPU and Board information
	36	*/
	37	#define CONFIG_DISPLAY_CPUINFO 1
	38	#define CONFIG_DISPLAY_BOARDINFO 1
	39
7379f45a DB	40	#define CONFIG_MISC_INIT_R
7379f45a DB	41
7379f45a DB	42	#define CONFIG_REVISION_TAG 1
7379f45a DB	43
9c44ddcc	44	#define CONFIG_ENV_SIZE (128 << 10) /* 128 KiB */
7379f45a DB	45
	46	/*
	47	* Hardware drivers
	48	*/
	49
05be5a60	50	/* USB */
95de1e2f	51	#define CONFIG_USB_MUSB_UDC 1
05be5a60 TR	52	#define CONFIG_USB_OMAP3 1
	53	#define CONFIG_TWL4030_USB 1
	54
	55	/* USB device configuration */
	56	#define CONFIG_USB_DEVICE 1
	57	#define CONFIG_USB_TTY 1
	58	#define CONFIG_SYS_CONSOLE_IS_IN_ENV 1
	59	/* Change these to suit your needs */
	60	#define CONFIG_USBD_VENDORID 0x0451
	61	#define CONFIG_USBD_PRODUCTID 0x5678
	62	#define CONFIG_USBD_MANUFACTURER "Texas Instruments"
	63	#define CONFIG_USBD_PRODUCT_NAME "Zoom1"
	64
4e8183b7 NM	65	#define MTDIDS_DEFAULT "nand0=nand"
	66	#define MTDPARTS_DEFAULT "mtdparts=nand:512k(x-loader),"\
	67	"1920k(u-boot),128k(u-boot-env),"\
	68	"4m(kernel),-(fs)"
7379f45a	69
161d2d5e	70	#if defined(CONFIG_CMD_NAND)
434f2cfc	71	/* NAND: SPL falcon mode configs */
	72	#ifdef CONFIG_SPL_OS_BOOT
	73	#define CONFIG_CMD_SPL_NAND_OFS 0x240000
	74	#define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000
	75	#define CONFIG_CMD_SPL_WRITE_SIZE 0x2000
	76	#endif
e7deec1b	77	#define CONFIG_CMD_NAND_LOCK_UNLOCK /* Enable lock/unlock support */
161d2d5e	78	#endif
7379f45a	79
d71dd042 NM	80	#define CONFIG_CMD_PING
d71dd042 NM	81	#define CONFIG_CMD_DHCP
7379f45a	82
161d2d5e	83	#undef CONFIG_SYS_I2C_OMAP24XX
6789e84e	84	#define CONFIG_SYS_I2C_OMAP34XX
7379f45a	85
cd782635 TR	86	/*
	87	* TWL4030
	88	*/
2c155130	89	#define CONFIG_TWL4030_LED 1
cd782635	90
7379f45a DB	91	/*
	92	* Board NAND Info.
	93	*/
7379f45a DB	94	#define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */
	95	/* to access nand */
	96	#define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */
	97	/* to access nand at */
	98	/* CS0 */
55f1b39f	99	#define CONFIG_SYS_NAND_BUSWIDTH_16BIT
7379f45a DB	100
7379f45a DB	101	/* Environment information */
7379f45a DB	102
	103	#define CONFIG_EXTRA_ENV_SETTINGS \
	104	"loadaddr=0x82000000\0" \
c2e7c7b2	105	"fdtaddr=0x80f80000\0" \
4e8183b7	106	"bootfile=uImage\0" \
c2e7c7b2	107	"fdtfile=omap3-ldp.dtb\0" \
4e8183b7 NM	108	"bootdir=/\0" \
4e8183b7 NM	109	"bootpart=0:1\0" \
05be5a60	110	"usbtty=cdc_acm\0" \
ea467c73	111	"console=ttyO2,115200n8\0" \
d6906cb8	112	"mmcdev=0\0" \
7379f45a DB	113	"videomode=1024x768@60,vxres=1024,vyres=768\0" \
	114	"videospec=omapfb:vram:2M,vram:4M\0" \
	115	"mmcargs=setenv bootargs console=${console} " \
	116	"video=${videospec},mode:${videomode} " \
	117	"root=/dev/mmcblk0p2 rw " \
	118	"rootfstype=ext3 rootwait\0" \
	119	"nandargs=setenv bootargs console=${console} " \
	120	"video=${videospec},mode:${videomode} " \
	121	"root=/dev/mtdblock4 rw " \
	122	"rootfstype=jffs2\0" \
d6906cb8	123	"loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
7379f45a	124	"bootscript=echo Running bootscript from mmc ...; " \
74de7aef	125	"source ${loadaddr}\0" \
4e8183b7	126	"loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
c2e7c7b2 NM	127	"loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
c2e7c7b2 NM	128	"loadzimage=setenv bootfile zImage; if run loadimage; then run loadfdt;fi\0"\
7379f45a DB	129	"mmcboot=echo Booting from mmc ...; " \
	130	"run mmcargs; " \
	131	"bootm ${loadaddr}\0" \
c2e7c7b2 NM	132	"mmczboot=echo Booting from mmc ...; " \
	133	"run mmcargs; " \
	134	"bootz ${loadaddr} - ${fdtaddr}\0" \
7379f45a DB	135	"nandboot=echo Booting from nand ...; " \
	136	"run nandargs; " \
	137	"nand read ${loadaddr} 280000 400000; " \
	138	"bootm ${loadaddr}\0" \
	139
	140	#define CONFIG_BOOTCOMMAND \
66968110	141	"mmc dev ${mmcdev}; if mmc rescan; then " \
7379f45a DB	142	"if run loadbootscript; then " \
	143	"run bootscript; " \
	144	"else " \
4e8183b7	145	"if run loadimage; then " \
7379f45a	146	"run mmcboot; " \
c2e7c7b2 NM	147	"else if run loadzimage; then " \
c2e7c7b2 NM	148	"run mmczboot; " \
7379f45a	149	"else run nandboot; " \
c2e7c7b2	150	"fi; fi;" \
7379f45a DB	151	"fi; " \
	152	"else run nandboot; fi"
	153
7379f45a DB	154	/*
	155	* Miscellaneous configurable options
	156	*/
161d2d5e NM	157	#define CONFIG_SYS_MEMTEST_START (PHYS_SDRAM_1) /* memtest */
161d2d5e NM	158	#define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_2 + \
7379f45a DB	159	0x01F00000) /* 31MB */
7379f45a DB	160
7379f45a DB	161	/*-----------------------------------------------------------------------
	162	* FLASH and environment organization
	163	*/
	164
	165	/* ** PISMO SUPPORT * */
6cbec7b3	166	#if defined(CONFIG_CMD_NAND)
222a3113	167	#define CONFIG_SYS_FLASH_BASE NAND_BASE
6cbec7b3	168	#endif
7379f45a DB	169
	170	/* Monitor at start of flash */
	171	#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
	172	#define CONFIG_SYS_ONENAND_BASE ONENAND_MAP
	173
	174	#define CONFIG_ENV_IS_IN_NAND 1
	175	#define ONENAND_ENV_OFFSET 0x260000 /* environment starts here */
	176	#define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */
	177
6cbec7b3 LC	178	#define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */
6cbec7b3 LC	179	#define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET
7379f45a DB	180	#define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET
7379f45a DB	181
8e40852f A	182	#define CONFIG_SYS_CACHELINE_SIZE 64
8e40852f A	183
9d70e772 NM	184	#ifdef CONFIG_CMD_NET
	185	/* Ethernet (LAN9211 from SMSC9118 family) */
	186	#define CONFIG_SMC911X
	187	#define CONFIG_SMC911X_32_BIT
	188	#define CONFIG_SMC911X_BASE DEBUG_BASE
	189
	190	#endif
	191
7379f45a	192	#endif /* __CONFIG_H */