]> git.ipfire.org Git - people/ms/u-boot.git/blame - include/configs/openrd.h
stm32f7: use stm32f7 gpio driver supporting driver model
[people/ms/u-boot.git] / include / configs / openrd.h
CommitLineData
35629363
AA
1/*
2 * (C) Copyright 2009
3 * Net Insight <www.netinsight.net>
4 * Written-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
5 *
6 * Based on sheevaplug.h:
7 * (C) Copyright 2009
8 * Marvell Semiconductor <www.marvell.com>
9 * Written-by: Prafulla Wadaskar <prafulla@marvell.com>
10 *
11 * SPDX-License-Identifier: GPL-2.0+
12 */
13
14#ifndef _CONFIG_OPENRD_H
15#define _CONFIG_OPENRD_H
16
35629363
AA
17/*
18 * High Level Configuration Options (easy to change)
19 */
20#define CONFIG_SHEEVA_88SV131 1 /* CPU Core subversion */
21#define CONFIG_KW88F6281 1 /* SOC Name */
22#define CONFIG_MACH_OPENRD_BASE /* Machine type */
23#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
35629363
AA
24
25/*
26 * Commands configuration
27 */
35629363 28#define CONFIG_SYS_MVFS
35629363 29#define CONFIG_CMD_ENV
35629363 30#define CONFIG_CMD_NAND
35629363
AA
31#define CONFIG_CMD_IDE
32
33/*
34 * mv-common.h should be defined after CMD configs since it used them
35 * to enable certain macros
36 */
37#include "mv-common.h"
38
39/*
40 * Environment variables configurations
41 */
42#ifdef CONFIG_CMD_NAND
43#define CONFIG_ENV_IS_IN_NAND 1
44#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K */
45#else
46#define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */
47#endif
48/*
49 * max 4k env size is enough, but in case of nand
50 * it has to be rounded to sector size
51 */
52#define CONFIG_ENV_SIZE 0x20000 /* 128k */
53#define CONFIG_ENV_ADDR 0x60000
54#define CONFIG_ENV_OFFSET 0x60000 /* env starts here */
55/*
56 * Environment is right behind U-Boot in flash. Make sure U-Boot
57 * doesn't grow into the environment area.
58 */
59#define CONFIG_BOARD_SIZE_LIMIT CONFIG_ENV_OFFSET
60
61/*
62 * Default environment variables
63 */
64#define CONFIG_BOOTCOMMAND "${x_bootcmd_kernel}; " \
65 "setenv bootargs ${x_bootargs} ${x_bootargs_root}; " \
66 "${x_bootcmd_usb}; bootm 0x6400000;"
67
68#define MTDIDS_DEFAULT "nand0=nand_mtd"
69#define MTDPARTS_DEFAULT "mtdparts=nand_mtd:0x100000@0x000000(uboot),"\
70 "0x400000@0x100000(uImage),"\
71 "0x1fb00000@0x500000(rootfs)"
72
73#define CONFIG_EXTRA_ENV_SETTINGS "x_bootargs=console" \
74 "=ttyS0,115200 "MTDPARTS_DEFAULT " rw ubi.mtd=2,2048\0" \
75 "x_bootcmd_kernel=nand read 0x6400000 0x100000 0x300000\0" \
76 "x_bootcmd_usb=usb start\0" \
77 "x_bootargs_root=root=ubi0:rootfs rootfstype=ubifs\0" \
78 "mtdids="MTDIDS_DEFAULT"\0" \
79 "mtdparts="MTDPARTS_DEFAULT"\0"
80
81/*
82 * Ethernet Driver configuration
83 */
84#ifdef CONFIG_CMD_NET
85# ifdef CONFIG_BOARD_IS_OPENRD_BASE
86# define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */
87# else
88# define CONFIG_MVGBE_PORTS {1, 1} /* enable both ports */
89# endif
90# ifdef CONFIG_BOARD_IS_OPENRD_ULTIMATE
91# define CONFIG_PHY_BASE_ADR 0x0
92# define PHY_NO "88E1121"
93# else
94# define CONFIG_PHY_BASE_ADR 0x8
95# define PHY_NO "88E1116"
96# endif
97#endif /* CONFIG_CMD_NET */
98
99/*
100 * SATA Driver configuration
101 */
102#ifdef CONFIG_MVSATA_IDE
103#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
104#define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET
105#endif /*CONFIG_MVSATA_IDE*/
106
107#ifdef CONFIG_CMD_MMC
35629363
AA
108#define CONFIG_MVEBU_MMC
109#define CONFIG_SYS_MMC_BASE KW_SDIO_BASE
110#endif /* CONFIG_CMD_MMC */
111
112#endif /* _CONFIG_OPENRD_BASE_H */