projects / people / ms / u-boot.git / blame
| Commit | Line | Data |
|---|---|---|
| 49f5befa XX |
1 | /* |
| 2 | * Copyright 2013 Freescale Semiconductor, Inc. | |
| 3 | * | |
| 3aab0cd8 | 4 | * SPDX-License-Identifier: GPL-2.0+ |
| 49f5befa XX |
5 | */ |
| 6 | ||
| 7 | /* | |
| 8 | * QorIQ P1 Tower boards configuration file | |
| 9 | */ | |
| 10 | #ifndef __CONFIG_H | |
| 11 | #define __CONFIG_H | |
| 12 | ||
| e838b0c7 | 13 | #define CONFIG_DISPLAY_BOARDINFO |
| 49f5befa XX |
14 | #if defined(CONFIG_TWR_P1025) |
| 15 | #define CONFIG_BOARDNAME "TWR-P1025" | |
| 16 | #define CONFIG_P1025 | |
| 17 | #define CONFIG_PHY_ATHEROS | |
| 18 | #define CONFIG_QE | |
| 19 | #define CONFIG_SYS_LBC_LBCR 0x00080000 /* Conversion of LBC addr */ | |
| 20 | #define CONFIG_SYS_LBC_LCRR 0x80000002 /* LB clock ratio reg */ | |
| 21 | #endif | |
| 22 | ||
| 23 | #ifdef CONFIG_SDCARD | |
| 24 | #define CONFIG_RAMBOOT_SDCARD | |
| 25 | #define CONFIG_SYS_RAMBOOT | |
| 26 | #define CONFIG_SYS_EXTRA_ENV_RELOC | |
| 27 | #define CONFIG_SYS_TEXT_BASE 0x11000000 | |
| e222b1f3 | 28 | #define CONFIG_RESET_VECTOR_ADDRESS 0x110bfffc |
| 49f5befa XX |
29 | #endif |
| 30 | ||
| 31 | #ifndef CONFIG_SYS_TEXT_BASE | |
| e222b1f3 | 32 | #define CONFIG_SYS_TEXT_BASE 0xeff40000 |
| 49f5befa XX |
33 | #endif |
| 34 | ||
| 35 | #ifndef CONFIG_RESET_VECTOR_ADDRESS | |
| 36 | #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc | |
| 37 | #endif | |
| 38 | ||
| 39 | #ifndef CONFIG_SYS_MONITOR_BASE | |
| 40 | #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ | |
| 41 | #endif | |
| 42 | ||
| 43 | /* High Level Configuration Options */ | |
| 44 | #define CONFIG_BOOKE | |
| 45 | #define CONFIG_E500 | |
| 49f5befa XX |
46 | |
| 47 | #define CONFIG_MP | |
| 48 | ||
| 49 | #define CONFIG_FSL_ELBC | |
| 50 | #define CONFIG_PCI | |
| 51 | #define CONFIG_PCIE1 /* PCIE controler 1 (slot 1) */ | |
| 52 | #define CONFIG_PCIE2 /* PCIE controler 2 (slot 2) */ | |
| 53 | #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ | |
| 54 | #define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ | |
| 55 | #define CONFIG_FSL_PCIE_RESET /* need PCIe reset errata */ | |
| 56 | #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ | |
| 57 | ||
| 58 | #define CONFIG_FSL_LAW | |
| 59 | #define CONFIG_TSEC_ENET /* tsec ethernet support */ | |
| 60 | #define CONFIG_ENV_OVERWRITE | |
| 61 | ||
| 62 | #define CONFIG_CMD_SATA | |
| 63 | #define CONFIG_SATA_SIL3114 | |
| 64 | #define CONFIG_SYS_SATA_MAX_DEVICE 2 | |
| 65 | #define CONFIG_LIBATA | |
| 66 | #define CONFIG_LBA48 | |
| 67 | ||
| 68 | #ifndef __ASSEMBLY__ | |
| 69 | extern unsigned long get_board_sys_clk(unsigned long dummy); | |
| 70 | #endif | |
| 71 | #define CONFIG_SYS_CLK_FREQ get_board_sys_clk(0) /*sysclk for TWR-P1025 */ | |
| 72 | ||
| 73 | #define CONFIG_DDR_CLK_FREQ 66666666 | |
| 74 | ||
| 75 | #define CONFIG_HWCONFIG | |
| 76 | /* | |
| 77 | * These can be toggled for performance analysis, otherwise use default. | |
| 78 | */ | |
| 79 | #define CONFIG_L2_CACHE | |
| 80 | #define CONFIG_BTB | |
| 81 | ||
| 82 | #define CONFIG_BOARD_EARLY_INIT_F /* Call board_pre_init */ | |
| 83 | ||
| 84 | #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ | |
| 85 | #define CONFIG_SYS_MEMTEST_END 0x1fffffff | |
| 86 | #define CONFIG_PANIC_HANG /* do not reset board on panic */ | |
| 87 | ||
| 88 | #define CONFIG_SYS_CCSRBAR 0xffe00000 | |
| 89 | #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR | |
| 90 | ||
| 91 | /* DDR Setup */ | |
| 5614e71b | 92 | #define CONFIG_SYS_FSL_DDR3 |
| 49f5befa XX |
93 | |
| 94 | #define CONFIG_SYS_SDRAM_SIZE_LAW LAW_SIZE_512M | |
| 95 | #define CONFIG_CHIP_SELECTS_PER_CTRL 1 | |
| 96 | ||
| 97 | #define CONFIG_SYS_SDRAM_SIZE (1u << (CONFIG_SYS_SDRAM_SIZE_LAW - 19)) | |
| 98 | #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 | |
| 99 | #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE | |
| 100 | ||
| 101 | #define CONFIG_NUM_DDR_CONTROLLERS 1 | |
| 102 | #define CONFIG_DIMM_SLOTS_PER_CTLR 1 | |
| 103 | ||
| 104 | /* Default settings for DDR3 */ | |
| 105 | #define CONFIG_SYS_DDR_CS0_BNDS 0x0000001f | |
| 106 | #define CONFIG_SYS_DDR_CS0_CONFIG 0x80014202 | |
| 107 | #define CONFIG_SYS_DDR_CS0_CONFIG_2 0x00000000 | |
| 108 | #define CONFIG_SYS_DDR_CS1_BNDS 0x00000000 | |
| 109 | #define CONFIG_SYS_DDR_CS1_CONFIG 0x00000000 | |
| 110 | #define CONFIG_SYS_DDR_CS1_CONFIG_2 0x00000000 | |
| 111 | ||
| 112 | #define CONFIG_SYS_DDR_DATA_INIT 0xdeadbeef | |
| 113 | #define CONFIG_SYS_DDR_INIT_ADDR 0x00000000 | |
| 114 | #define CONFIG_SYS_DDR_INIT_EXT_ADDR 0x00000000 | |
| 115 | #define CONFIG_SYS_DDR_MODE_CONTROL 0x00000000 | |
| 116 | ||
| 117 | #define CONFIG_SYS_DDR_ZQ_CONTROL 0x89080600 | |
| 118 | #define CONFIG_SYS_DDR_WRLVL_CONTROL 0x8655a608 | |
| 119 | #define CONFIG_SYS_DDR_SR_CNTR 0x00000000 | |
| 120 | #define CONFIG_SYS_DDR_RCW_1 0x00000000 | |
| 121 | #define CONFIG_SYS_DDR_RCW_2 0x00000000 | |
| 122 | #define CONFIG_SYS_DDR_CONTROL 0xc70c0000 /* Type = DDR3 */ | |
| 123 | #define CONFIG_SYS_DDR_CONTROL_2 0x04401050 | |
| 124 | #define CONFIG_SYS_DDR_TIMING_4 0x00220001 | |
| 125 | #define CONFIG_SYS_DDR_TIMING_5 0x03402400 | |
| 126 | ||
| 127 | #define CONFIG_SYS_DDR_TIMING_3 0x00020000 | |
| 128 | #define CONFIG_SYS_DDR_TIMING_0 0x00220004 | |
| 129 | #define CONFIG_SYS_DDR_TIMING_1 0x5c5b6544 | |
| 130 | #define CONFIG_SYS_DDR_TIMING_2 0x0fa880de | |
| 131 | #define CONFIG_SYS_DDR_CLK_CTRL 0x03000000 | |
| 132 | #define CONFIG_SYS_DDR_MODE_1 0x80461320 | |
| 133 | #define CONFIG_SYS_DDR_MODE_2 0x00008000 | |
| 134 | #define CONFIG_SYS_DDR_INTERVAL 0x09480000 | |
| 135 | ||
| 136 | /* | |
| 137 | * Memory map | |
| 138 | * | |
| 139 | * 0x0000_0000 0x1fff_ffff DDR Up to 512MB cacheable | |
| 140 | * 0x8000_0000 0xdfff_ffff PCI Express Mem 1.5G non-cacheable(PCIe * 3) | |
| 141 | * 0xffc0_0000 0xffc3_ffff PCI IO range 256k non-cacheable | |
| 142 | * | |
| 143 | * Localbus | |
| 144 | * 0xe000_0000 0xe002_0000 SSD1289 128K non-cacheable | |
| 145 | * 0xec00_0000 0xefff_ffff FLASH Up to 64M non-cacheable | |
| 146 | * | |
| 147 | * 0xff90_0000 0xff97_ffff L2 SRAM Up to 512K cacheable | |
| 148 | * 0xffd0_0000 0xffd0_3fff init ram 16K Cacheable | |
| 149 | * 0xffe0_0000 0xffef_ffff CCSR 1M non-cacheable | |
| 150 | */ | |
| 151 | ||
| 152 | /* | |
| 153 | * Local Bus Definitions | |
| 154 | */ | |
| 155 | #define CONFIG_SYS_MAX_FLASH_SECT 512 /* 64M */ | |
| 156 | #define CONFIG_SYS_FLASH_BASE 0xec000000 | |
| 157 | ||
| 158 | #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE | |
| 159 | ||
| 160 | #define CONFIG_FLASH_BR_PRELIM (BR_PHYS_ADDR((CONFIG_SYS_FLASH_BASE_PHYS)) \ | |
| 161 | | BR_PS_16 | BR_V) | |
| 162 | ||
| 163 | #define CONFIG_FLASH_OR_PRELIM 0xfc0000b1 | |
| 164 | ||
| 165 | #define CONFIG_SYS_SSD_BASE 0xe0000000 | |
| 166 | #define CONFIG_SYS_SSD_BASE_PHYS CONFIG_SYS_SSD_BASE | |
| 167 | #define CONFIG_SSD_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_SSD_BASE_PHYS) | \ | |
| 168 | BR_PS_16 | BR_V) | |
| 169 | #define CONFIG_SSD_OR_PRELIM (OR_AM_64KB | OR_GPCM_CSNT | OR_GPCM_XACS | \ | |
| 170 | OR_GPCM_ACS_DIV2 | OR_GPCM_SCY | \ | |
| 171 | OR_GPCM_TRLX | OR_GPCM_EHTR | OR_GPCM_EAD) | |
| 172 | ||
| 173 | #define CONFIG_SYS_BR2_PRELIM CONFIG_SSD_BR_PRELIM | |
| 174 | #define CONFIG_SYS_OR2_PRELIM CONFIG_SSD_OR_PRELIM | |
| 175 | ||
| 176 | #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS} | |
| 177 | #define CONFIG_SYS_FLASH_QUIET_TEST | |
| 178 | #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ | |
| 179 | ||
| 180 | #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ | |
| 181 | ||
| 182 | #undef CONFIG_SYS_FLASH_CHECKSUM | |
| 183 | #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ | |
| 184 | #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ | |
| 185 | ||
| 186 | #define CONFIG_FLASH_CFI_DRIVER | |
| 187 | #define CONFIG_SYS_FLASH_CFI | |
| 188 | #define CONFIG_SYS_FLASH_EMPTY_INFO | |
| 189 | #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE | |
| 190 | ||
| 191 | #define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */ | |
| 192 | ||
| 193 | #define CONFIG_SYS_INIT_RAM_LOCK | |
| 194 | #define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 | |
| 195 | /* Initial L1 address */ | |
| 196 | #define CONFIG_SYS_INIT_RAM_ADDR_PHYS CONFIG_SYS_INIT_RAM_ADDR | |
| 197 | #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0 | |
| 198 | #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS | |
| 199 | /* Size of used area in RAM */ | |
| 200 | #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 | |
| 201 | ||
| 202 | #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ | |
| 203 | GENERATED_GBL_DATA_SIZE) | |
| 204 | #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET | |
| 205 | ||
| 9307cbab | 206 | #define CONFIG_SYS_MONITOR_LEN (768 * 1024) |
| 49f5befa XX |
207 | #define CONFIG_SYS_MALLOC_LEN (1024 * 1024)/* Reserved for malloc */ |
| 208 | ||
| 209 | #define CONFIG_SYS_BR0_PRELIM CONFIG_FLASH_BR_PRELIM /* NOR Base Address */ | |
| 210 | #define CONFIG_SYS_OR0_PRELIM CONFIG_FLASH_OR_PRELIM /* NOR Options */ | |
| 211 | ||
| 212 | /* Serial Port | |
| 213 | * open - index 2 | |
| 214 | * shorted - index 1 | |
| 215 | */ | |
| 216 | #define CONFIG_CONS_INDEX 1 | |
| 217 | #undef CONFIG_SERIAL_SOFTWARE_FIFO | |
| 49f5befa XX |
218 | #define CONFIG_SYS_NS16550_SERIAL |
| 219 | #define CONFIG_SYS_NS16550_REG_SIZE 1 | |
| 220 | #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) | |
| 221 | ||
| 222 | #define CONFIG_SYS_BAUDRATE_TABLE \ | |
| 223 | {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} | |
| 224 | ||
| 225 | #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) | |
| 226 | #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) | |
| 227 | ||
| 228 | /* Use the HUSH parser */ | |
| 229 | #define CONFIG_SYS_HUSH_PARSER | |
| 230 | #ifdef CONFIG_SYS_HUSH_PARSER | |
| 231 | #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " | |
| 232 | #endif | |
| 233 | ||
| 234 | /* | |
| 235 | * Pass open firmware flat tree | |
| 236 | */ | |
| 237 | #define CONFIG_OF_LIBFDT | |
| 238 | #define CONFIG_OF_BOARD_SETUP | |
| 239 | #define CONFIG_OF_STDOUT_VIA_ALIAS | |
| 240 | ||
| 49f5befa XX |
241 | /* new uImage format support */ |
| 242 | #define CONFIG_FIT | |
| 243 | #define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */ | |
| 244 | ||
| 245 | /* I2C */ | |
| 246 | #define CONFIG_SYS_I2C | |
| 247 | #define CONFIG_SYS_I2C_FSL /* Use FSL common I2C driver */ | |
| 248 | #define CONFIG_SYS_FSL_I2C_SPEED 400000 /* I2C spd and slave address */ | |
| 249 | #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F | |
| 250 | #define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 | |
| 251 | #define CONFIG_SYS_I2C_EEPROM_ADDR 0x52 | |
| 252 | ||
| 253 | /* | |
| 254 | * I2C2 EEPROM | |
| 255 | */ | |
| 256 | #define CONFIG_SYS_FSL_I2C2_SPEED 400000 /* I2C spd and slave address */ | |
| 257 | #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F | |
| 258 | #define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100 | |
| 259 | ||
| 260 | #define CONFIG_SYS_I2C_PCA9555_ADDR 0x23 | |
| 261 | ||
| 262 | /* enable read and write access to EEPROM */ | |
| 263 | #define CONFIG_CMD_EEPROM | |
| 49f5befa XX |
264 | #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 |
| 265 | #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 | |
| 266 | #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 | |
| 267 | ||
| 268 | /* | |
| 269 | * eSPI - Enhanced SPI | |
| 270 | */ | |
| 271 | #define CONFIG_HARD_SPI | |
| 49f5befa XX |
272 | |
| 273 | #if defined(CONFIG_PCI) | |
| 274 | /* | |
| 275 | * General PCI | |
| 276 | * Memory space is mapped 1-1, but I/O space must start from 0. | |
| 277 | */ | |
| 278 | ||
| 279 | /* controller 2, direct to uli, tgtid 2, Base address 9000 */ | |
| 280 | #define CONFIG_SYS_PCIE2_NAME "TWR-ELEV PCIe SLOT" | |
| 281 | #define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000 | |
| 282 | #define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000 | |
| 283 | #define CONFIG_SYS_PCIE2_MEM_PHYS 0xa0000000 | |
| 284 | #define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */ | |
| 285 | #define CONFIG_SYS_PCIE2_IO_VIRT 0xffc10000 | |
| 286 | #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 | |
| 287 | #define CONFIG_SYS_PCIE2_IO_PHYS 0xffc10000 | |
| 288 | #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ | |
| 289 | ||
| 290 | /* controller 1, tgtid 1, Base address a000 */ | |
| 291 | #define CONFIG_SYS_PCIE1_NAME "mini PCIe SLOT" | |
| 292 | #define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 | |
| 293 | #define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 | |
| 294 | #define CONFIG_SYS_PCIE1_MEM_PHYS 0x80000000 | |
| 295 | #define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ | |
| 296 | #define CONFIG_SYS_PCIE1_IO_VIRT 0xffc00000 | |
| 297 | #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 | |
| 298 | #define CONFIG_SYS_PCIE1_IO_PHYS 0xffc00000 | |
| 299 | #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ | |
| 300 | ||
| 49f5befa | 301 | #define CONFIG_PCI_PNP /* do pci plug-and-play */ |
| 49f5befa | 302 | #define CONFIG_CMD_PCI |
| 49f5befa XX |
303 | |
| 304 | #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ | |
| 305 | #define CONFIG_DOS_PARTITION | |
| 306 | #endif /* CONFIG_PCI */ | |
| 307 | ||
| 308 | #if defined(CONFIG_TSEC_ENET) | |
| 309 | ||
| 49f5befa XX |
310 | #define CONFIG_MII /* MII PHY management */ |
| 311 | #define CONFIG_TSEC1 | |
| 312 | #define CONFIG_TSEC1_NAME "eTSEC1" | |
| 313 | #undef CONFIG_TSEC2 | |
| 314 | #undef CONFIG_TSEC2_NAME | |
| 315 | #define CONFIG_TSEC3 | |
| 316 | #define CONFIG_TSEC3_NAME "eTSEC3" | |
| 317 | ||
| 318 | #define TSEC1_PHY_ADDR 2 | |
| 319 | #define TSEC2_PHY_ADDR 0 | |
| 320 | #define TSEC3_PHY_ADDR 1 | |
| 321 | ||
| 322 | #define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) | |
| 323 | #define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) | |
| 324 | #define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) | |
| 325 | ||
| 326 | #define TSEC1_PHYIDX 0 | |
| 327 | #define TSEC2_PHYIDX 0 | |
| 328 | #define TSEC3_PHYIDX 0 | |
| 329 | ||
| 330 | #define CONFIG_ETHPRIME "eTSEC1" | |
| 331 | ||
| 332 | #define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */ | |
| 333 | ||
| 334 | #define CONFIG_HAS_ETH0 | |
| 335 | #define CONFIG_HAS_ETH1 | |
| 336 | #undef CONFIG_HAS_ETH2 | |
| 337 | #endif /* CONFIG_TSEC_ENET */ | |
| 338 | ||
| 339 | #ifdef CONFIG_QE | |
| 340 | /* QE microcode/firmware address */ | |
| 341 | #define CONFIG_SYS_QE_FMAN_FW_IN_NOR | |
| dcf1d774 | 342 | #define CONFIG_SYS_QE_FW_ADDR 0xefec0000 |
| 49f5befa XX |
343 | #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 |
| 344 | #endif /* CONFIG_QE */ | |
| 345 | ||
| 346 | #ifdef CONFIG_TWR_P1025 | |
| 347 | /* | |
| 348 | * QE UEC ethernet configuration | |
| 349 | */ | |
| 350 | #define CONFIG_MIIM_ADDRESS (CONFIG_SYS_CCSRBAR + 0x82120) | |
| 351 | ||
| 352 | #undef CONFIG_UEC_ETH | |
| 353 | #define CONFIG_PHY_MODE_NEED_CHANGE | |
| 354 | ||
| 355 | #define CONFIG_UEC_ETH1 /* ETH1 */ | |
| 356 | #define CONFIG_HAS_ETH0 | |
| 357 | ||
| 358 | #ifdef CONFIG_UEC_ETH1 | |
| 359 | #define CONFIG_SYS_UEC1_UCC_NUM 0 /* UCC1 */ | |
| 360 | #define CONFIG_SYS_UEC1_RX_CLK QE_CLK12 /* CLK12 for MII */ | |
| 361 | #define CONFIG_SYS_UEC1_TX_CLK QE_CLK9 /* CLK9 for MII */ | |
| 362 | #define CONFIG_SYS_UEC1_ETH_TYPE FAST_ETH | |
| 363 | #define CONFIG_SYS_UEC1_PHY_ADDR 0x18 /* 0x18 for MII */ | |
| 364 | #define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_MII | |
| 365 | #define CONFIG_SYS_UEC1_INTERFACE_SPEED 100 | |
| 366 | #endif /* CONFIG_UEC_ETH1 */ | |
| 367 | ||
| 368 | #define CONFIG_UEC_ETH5 /* ETH5 */ | |
| 369 | #define CONFIG_HAS_ETH1 | |
| 370 | ||
| 371 | #ifdef CONFIG_UEC_ETH5 | |
| 372 | #define CONFIG_SYS_UEC5_UCC_NUM 4 /* UCC5 */ | |
| 373 | #define CONFIG_SYS_UEC5_RX_CLK QE_CLK_NONE | |
| 374 | #define CONFIG_SYS_UEC5_TX_CLK QE_CLK13 /* CLK 13 for RMII */ | |
| 375 | #define CONFIG_SYS_UEC5_ETH_TYPE FAST_ETH | |
| 376 | #define CONFIG_SYS_UEC5_PHY_ADDR 0x19 /* 0x19 for RMII */ | |
| 377 | #define CONFIG_SYS_UEC5_INTERFACE_TYPE PHY_INTERFACE_MODE_RMII | |
| 378 | #define CONFIG_SYS_UEC5_INTERFACE_SPEED 100 | |
| 379 | #endif /* CONFIG_UEC_ETH5 */ | |
| 380 | #endif /* CONFIG_TWR-P1025 */ | |
| 381 | ||
| 94b383e7 YL |
382 | /* |
| 383 | * Dynamic MTD Partition support with mtdparts | |
| 384 | */ | |
| 385 | #define CONFIG_MTD_DEVICE | |
| 386 | #define CONFIG_MTD_PARTITIONS | |
| 387 | #define CONFIG_CMD_MTDPARTS | |
| 388 | #define CONFIG_FLASH_CFI_MTD | |
| 389 | #define MTDIDS_DEFAULT "nor0=ec000000.nor" | |
| 390 | #define MTDPARTS_DEFAULT "mtdparts=ec000000.nor:256k(vsc7385-firmware)," \ | |
| 391 | "256k(dtb),5632k(kernel),57856k(fs)," \ | |
| 392 | "256k(qe-ucode-firmware),1280k(u-boot)" | |
| 393 | ||
| 49f5befa XX |
394 | /* |
| 395 | * Environment | |
| 396 | */ | |
| 397 | #ifdef CONFIG_SYS_RAMBOOT | |
| 398 | #ifdef CONFIG_RAMBOOT_SDCARD | |
| 399 | #define CONFIG_ENV_IS_IN_MMC | |
| 400 | #define CONFIG_ENV_SIZE 0x2000 | |
| 401 | #define CONFIG_SYS_MMC_ENV_DEV 0 | |
| 402 | #else | |
| 403 | #define CONFIG_ENV_IS_NOWHERE /* Store ENV in memory only */ | |
| 404 | #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000) | |
| 405 | #define CONFIG_ENV_SIZE 0x2000 | |
| 406 | #endif | |
| 407 | #else | |
| 408 | #define CONFIG_ENV_IS_IN_FLASH | |
| 49f5befa | 409 | #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) |
| 49f5befa XX |
410 | #define CONFIG_ENV_SIZE 0x2000 |
| 411 | #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ | |
| 412 | #endif | |
| 413 | ||
| 414 | #define CONFIG_LOADS_ECHO /* echo on for serial download */ | |
| 415 | #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ | |
| 416 | ||
| 417 | /* | |
| 418 | * Command line configuration. | |
| 419 | */ | |
| 49f5befa XX |
420 | #define CONFIG_CMD_IRQ |
| 421 | #define CONFIG_CMD_PING | |
| 422 | #define CONFIG_CMD_I2C | |
| 423 | #define CONFIG_CMD_MII | |
| 49f5befa XX |
424 | #define CONFIG_CMD_REGINFO |
| 425 | ||
| 426 | /* | |
| 427 | * USB | |
| 428 | */ | |
| 429 | #define CONFIG_HAS_FSL_DR_USB | |
| 430 | ||
| 431 | #if defined(CONFIG_HAS_FSL_DR_USB) | |
| 432 | #define CONFIG_USB_EHCI | |
| 433 | ||
| 434 | #ifdef CONFIG_USB_EHCI | |
| 435 | #define CONFIG_CMD_USB | |
| 436 | #define CONFIG_EHCI_HCD_INIT_AFTER_RESET | |
| 437 | #define CONFIG_USB_EHCI_FSL | |
| 438 | #define CONFIG_USB_STORAGE | |
| 439 | #endif | |
| 440 | #endif | |
| 441 | ||
| 442 | #define CONFIG_MMC | |
| 443 | ||
| 444 | #ifdef CONFIG_MMC | |
| 445 | #define CONFIG_FSL_ESDHC | |
| 446 | #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR | |
| 447 | #define CONFIG_CMD_MMC | |
| 448 | #define CONFIG_GENERIC_MMC | |
| 449 | #endif | |
| 450 | ||
| 451 | #if defined(CONFIG_MMC) || defined(CONFIG_USB_EHCI) \ | |
| 452 | || defined(CONFIG_FSL_SATA) | |
| 453 | #define CONFIG_CMD_EXT2 | |
| 454 | #define CONFIG_CMD_FAT | |
| 455 | #define CONFIG_DOS_PARTITION | |
| 456 | #endif | |
| 457 | ||
| 458 | #undef CONFIG_WATCHDOG /* watchdog disabled */ | |
| 459 | ||
| 460 | /* | |
| 461 | * Miscellaneous configurable options | |
| 462 | */ | |
| 463 | #define CONFIG_SYS_LONGHELP /* undef to save memory */ | |
| 464 | #define CONFIG_CMDLINE_EDITING /* Command-line editing */ | |
| 465 | #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ | |
| 49f5befa XX |
466 | #if defined(CONFIG_CMD_KGDB) |
| 467 | #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ | |
| 468 | #else | |
| 469 | #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ | |
| 470 | #endif | |
| 471 | #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) | |
| 472 | /* Print Buffer Size */ | |
| 473 | #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ | |
| 474 | #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ | |
| 49f5befa XX |
475 | |
| 476 | /* | |
| 477 | * For booting Linux, the board info and command line data | |
| 478 | * have to be in the first 64 MB of memory, since this is | |
| 479 | * the maximum mapped by the Linux kernel during initialization. | |
| 480 | */ | |
| 481 | #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory for Linux*/ | |
| 482 | #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ | |
| 483 | ||
| 484 | /* | |
| 485 | * Environment Configuration | |
| 486 | */ | |
| 487 | #define CONFIG_HOSTNAME unknown | |
| 488 | #define CONFIG_ROOTPATH "/opt/nfsroot" | |
| 489 | #define CONFIG_BOOTFILE "uImage" | |
| 490 | #define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */ | |
| 491 | ||
| 492 | /* default location for tftp and bootm */ | |
| 493 | #define CONFIG_LOADADDR 1000000 | |
| 494 | ||
| 495 | #define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ | |
| 496 | #define CONFIG_BOOTARGS /* the boot command will set bootargs */ | |
| 497 | ||
| 498 | #define CONFIG_BAUDRATE 115200 | |
| 499 | ||
| 500 | #define CONFIG_EXTRA_ENV_SETTINGS \ | |
| 501 | "netdev=eth0\0" \ | |
| 502 | "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ | |
| 503 | "loadaddr=1000000\0" \ | |
| 504 | "bootfile=uImage\0" \ | |
| 505 | "dtbfile=twr-p1025twr.dtb\0" \ | |
| 506 | "ramdiskfile=rootfs.ext2.gz.uboot\0" \ | |
| 507 | "qefirmwarefile=fsl_qe_ucode_1021_10_A.bin\0" \ | |
| 508 | "tftpflash=tftpboot $loadaddr $uboot; " \ | |
| 509 | "protect off " __stringify(CONFIG_SYS_TEXT_BASE) " +$filesize; " \ | |
| 510 | "erase " __stringify(CONFIG_SYS_TEXT_BASE) " +$filesize; " \ | |
| 511 | "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) " $filesize; " \ | |
| 512 | "protect on " __stringify(CONFIG_SYS_TEXT_BASE) " +$filesize; " \ | |
| 513 | "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) " $filesize\0" \ | |
| 514 | "kernelflash=tftpboot $loadaddr $bootfile; " \ | |
| 515 | "protect off 0xefa80000 +$filesize; " \ | |
| 516 | "erase 0xefa80000 +$filesize; " \ | |
| 517 | "cp.b $loadaddr 0xefa80000 $filesize; " \ | |
| 518 | "protect on 0xefa80000 +$filesize; " \ | |
| 519 | "cmp.b $loadaddr 0xefa80000 $filesize\0" \ | |
| 520 | "dtbflash=tftpboot $loadaddr $dtbfile; " \ | |
| 521 | "protect off 0xefe80000 +$filesize; " \ | |
| 522 | "erase 0xefe80000 +$filesize; " \ | |
| 523 | "cp.b $loadaddr 0xefe80000 $filesize; " \ | |
| 524 | "protect on 0xefe80000 +$filesize; " \ | |
| 525 | "cmp.b $loadaddr 0xefe80000 $filesize\0" \ | |
| 526 | "ramdiskflash=tftpboot $loadaddr $ramdiskfile; " \ | |
| 527 | "protect off 0xeeb80000 +$filesize; " \ | |
| 528 | "erase 0xeeb80000 +$filesize; " \ | |
| 529 | "cp.b $loadaddr 0xeeb80000 $filesize; " \ | |
| 530 | "protect on 0xeeb80000 +$filesize; " \ | |
| 531 | "cmp.b $loadaddr 0xeeb80000 $filesize\0" \ | |
| 532 | "qefirmwareflash=tftpboot $loadaddr $qefirmwarefile; " \ | |
| 533 | "protect off 0xefec0000 +$filesize; " \ | |
| 534 | "erase 0xefec0000 +$filesize; " \ | |
| 535 | "cp.b $loadaddr 0xefec0000 $filesize; " \ | |
| 536 | "protect on 0xefec0000 +$filesize; " \ | |
| 537 | "cmp.b $loadaddr 0xefec0000 $filesize\0" \ | |
| 538 | "consoledev=ttyS0\0" \ | |
| 539 | "ramdiskaddr=2000000\0" \ | |
| 540 | "ramdiskfile=rootfs.ext2.gz.uboot\0" \ | |
| 541 | "fdtaddr=c00000\0" \ | |
| 542 | "bdev=sda1\0" \ | |
| 543 | "norbootaddr=ef080000\0" \ | |
| 544 | "norfdtaddr=ef040000\0" \ | |
| 545 | "ramdisk_size=120000\0" \ | |
| 546 | "usbboot=setenv bootargs root=/dev/sda1 rw rootdelay=5 " \ | |
| 547 | "console=$consoledev,$baudrate $othbootargs ; bootm 0xefa80000 - 0xefe80000" | |
| 548 | ||
| 549 | #define CONFIG_NFSBOOTCOMMAND \ | |
| 550 | "setenv bootargs root=/dev/nfs rw " \ | |
| 551 | "nfsroot=$serverip:$rootpath " \ | |
| 552 | "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ | |
| 553 | "console=$consoledev,$baudrate $othbootargs;" \ | |
| 554 | "tftp $loadaddr $bootfile&&" \ | |
| 555 | "tftp $fdtaddr $fdtfile&&" \ | |
| 556 | "bootm $loadaddr - $fdtaddr" | |
| 557 | ||
| 558 | #define CONFIG_HDBOOT \ | |
| 559 | "setenv bootargs root=/dev/$bdev rw rootdelay=30 " \ | |
| 560 | "console=$consoledev,$baudrate $othbootargs;" \ | |
| 561 | "usb start;" \ | |
| 562 | "ext2load usb 0:1 $loadaddr /boot/$bootfile;" \ | |
| 563 | "ext2load usb 0:1 $fdtaddr /boot/$fdtfile;" \ | |
| 564 | "bootm $loadaddr - $fdtaddr" | |
| 565 | ||
| 566 | #define CONFIG_USB_FAT_BOOT \ | |
| 567 | "setenv bootargs root=/dev/ram rw " \ | |
| 568 | "console=$consoledev,$baudrate $othbootargs " \ | |
| 569 | "ramdisk_size=$ramdisk_size;" \ | |
| 570 | "usb start;" \ | |
| 571 | "fatload usb 0:2 $loadaddr $bootfile;" \ | |
| 572 | "fatload usb 0:2 $fdtaddr $fdtfile;" \ | |
| 573 | "fatload usb 0:2 $ramdiskaddr $ramdiskfile;" \ | |
| 574 | "bootm $loadaddr $ramdiskaddr $fdtaddr" | |
| 575 | ||
| 576 | #define CONFIG_USB_EXT2_BOOT \ | |
| 577 | "setenv bootargs root=/dev/ram rw " \ | |
| 578 | "console=$consoledev,$baudrate $othbootargs " \ | |
| 579 | "ramdisk_size=$ramdisk_size;" \ | |
| 580 | "usb start;" \ | |
| 581 | "ext2load usb 0:4 $loadaddr $bootfile;" \ | |
| 582 | "ext2load usb 0:4 $fdtaddr $fdtfile;" \ | |
| 583 | "ext2load usb 0:4 $ramdiskaddr $ramdiskfile;" \ | |
| 584 | "bootm $loadaddr $ramdiskaddr $fdtaddr" | |
| 585 | ||
| 586 | #define CONFIG_NORBOOT \ | |
| 587 | "setenv bootargs root=/dev/mtdblock3 rw " \ | |
| 588 | "console=$consoledev,$baudrate rootfstype=jffs2 $othbootargs;" \ | |
| 589 | "bootm $norbootaddr - $norfdtaddr" | |
| 590 | ||
| 591 | #define CONFIG_RAMBOOTCOMMAND_TFTP \ | |
| 592 | "setenv bootargs root=/dev/ram rw " \ | |
| 593 | "console=$consoledev,$baudrate $othbootargs " \ | |
| 594 | "ramdisk_size=$ramdisk_size;" \ | |
| 595 | "tftp $ramdiskaddr $ramdiskfile;" \ | |
| 596 | "tftp $loadaddr $bootfile;" \ | |
| 597 | "tftp $fdtaddr $fdtfile;" \ | |
| 598 | "bootm $loadaddr $ramdiskaddr $fdtaddr" | |
| 599 | ||
| 600 | #define CONFIG_RAMBOOTCOMMAND \ | |
| 601 | "setenv bootargs root=/dev/ram rw " \ | |
| 602 | "console=$consoledev,$baudrate $othbootargs " \ | |
| 603 | "ramdisk_size=$ramdisk_size;" \ | |
| 604 | "bootm 0xefa80000 0xeeb80000 0xefe80000" | |
| 605 | ||
| 606 | #define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND | |
| 607 | ||
| 608 | #endif /* __CONFIG_H */ |