projects / people / ms / u-boot.git / blame
| Commit | Line | Data |
|---|---|---|
| 5e4b3361 SR |
1 | /* |
| 2 | * (C) Copyright 2003-2004 | |
| 3 | * Wolfgang Denk, DENX Software Engineering, wd@denx.de. | |
| 4 | * | |
| 5 | * See file CREDITS for list of people who contributed to this | |
| 6 | * project. | |
| 7 | * | |
| 8 | * This program is free software; you can redistribute it and/or | |
| 9 | * modify it under the terms of the GNU General Public License as | |
| 10 | * published by the Free Software Foundation; either version 2 of | |
| 11 | * the License, or (at your option) any later version. | |
| 12 | * | |
| 13 | * This program is distributed in the hope that it will be useful, | |
| 14 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
| 15 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
| 16 | * GNU General Public License for more details. | |
| 17 | * | |
| 18 | * You should have received a copy of the GNU General Public License | |
| 19 | * along with this program; if not, write to the Free Software | |
| 20 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, | |
| 21 | * MA 02111-1307 USA | |
| 22 | */ | |
| 23 | ||
| 24 | /************************************************************************* | |
| 25 | * (c) 2005 esd gmbh Hannover | |
| 26 | * | |
| 27 | * | |
| 28 | * from IceCube.h file | |
| 29 | * by Reinhard Arlt reinhard.arlt@esd-electronics.com | |
| 30 | * | |
| 31 | *************************************************************************/ | |
| 32 | ||
| 33 | #ifndef __CONFIG_H | |
| 34 | #define __CONFIG_H | |
| 35 | ||
| 36 | /* | |
| 37 | * High Level Configuration Options | |
| 38 | * (easy to change) | |
| 39 | */ | |
| 40 | ||
| 41 | #define CONFIG_MPC5200 1 /* This is an MPC5xxx CPU */ | |
| 42 | #define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */ | |
| 43 | #define CONFIG_ICECUBE 1 /* ... on IceCube board */ | |
| 44 | #define CONFIG_PF5200 1 /* ... on PF5200 board */ | |
| 45 | #define CONFIG_MPC5200_DDR 1 /* ... use DDR RAM */ | |
| 46 | ||
| 47 | #define CFG_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */ | |
| 48 | ||
| 49 | #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ | |
| 50 | #define BOOTFLAG_WARM 0x02 /* Software reboot */ | |
| 51 | ||
| 31d82672 | 52 | #define CONFIG_HIGH_BATS 1 /* High BATs supported */ |
| 5e4b3361 SR |
53 | /* |
| 54 | * Serial console configuration | |
| 55 | */ | |
| 56 | #define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */ | |
| 57 | #if 0 /* test-only */ | |
| 58 | #define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */ | |
| 59 | #else | |
| 60 | #define CONFIG_BAUDRATE 9600 /* ... at 115200 bps */ | |
| 61 | #endif | |
| 62 | #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 } | |
| 63 | ||
| 64 | #ifdef CONFIG_MPC5200 /* MPC5100 PCI is not supported yet. */ | |
| 65 | /* | |
| 66 | * PCI Mapping: | |
| 67 | * 0x40000000 - 0x4fffffff - PCI Memory | |
| 68 | * 0x50000000 - 0x50ffffff - PCI IO Space | |
| 69 | */ | |
| 70 | #define CONFIG_PCI 1 | |
| 71 | #define CONFIG_PCI_PNP 1 | |
| 72 | #define CONFIG_PCI_SCAN_SHOW 1 | |
| f33fca22 | 73 | #define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE 1 |
| 5e4b3361 SR |
74 | |
| 75 | #define CONFIG_PCI_MEM_BUS 0x40000000 | |
| 76 | #define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS | |
| 77 | #define CONFIG_PCI_MEM_SIZE 0x10000000 | |
| 78 | ||
| 79 | #define CONFIG_PCI_IO_BUS 0x50000000 | |
| 80 | #define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS | |
| 81 | #define CONFIG_PCI_IO_SIZE 0x01000000 | |
| 82 | ||
| 63ff004c | 83 | #define CONFIG_MII 1 |
| 5e4b3361 SR |
84 | #if 0 /* test-only !!! */ |
| 85 | #define CONFIG_NET_MULTI 1 | |
| 86 | #define CONFIG_EEPRO100 1 | |
| 87 | #define CFG_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */ | |
| 88 | #define CONFIG_NS8382X 1 | |
| 89 | #endif | |
| 5e4b3361 SR |
90 | #endif |
| 91 | ||
| 92 | /* Partitions */ | |
| 93 | #define CONFIG_MAC_PARTITION | |
| 94 | #define CONFIG_DOS_PARTITION | |
| 95 | ||
| 96 | /* USB */ | |
| 97 | #if 0 | |
| 98 | #define CONFIG_USB_OHCI | |
| 5e4b3361 | 99 | #define CONFIG_USB_STORAGE |
| 5e4b3361 SR |
100 | #endif |
| 101 | ||
| d794cfef | 102 | |
| 079a136c JL |
103 | /* |
| 104 | * BOOTP options | |
| 105 | */ | |
| 106 | #define CONFIG_BOOTP_BOOTFILESIZE | |
| 107 | #define CONFIG_BOOTP_BOOTPATH | |
| 108 | #define CONFIG_BOOTP_GATEWAY | |
| 109 | #define CONFIG_BOOTP_HOSTNAME | |
| 110 | ||
| 111 | ||
| 5e4b3361 | 112 | /* |
| d794cfef | 113 | * Command line configuration. |
| 5e4b3361 | 114 | */ |
| d794cfef JL |
115 | #include <config_cmd_default.h> |
| 116 | ||
| 117 | #define CONFIG_CMD_BSP | |
| d794cfef JL |
118 | #define CONFIG_CMD_EEPROM |
| 119 | #define CONFIG_CMD_ELF | |
| 120 | #define CONFIG_CMD_FAT | |
| 121 | #define CONFIG_CMD_I2C | |
| 122 | #define CONFIG_CMD_IDE | |
| 123 | ||
| 079a136c JL |
124 | #ifdef CONFIG_MPC5200 |
| 125 | #define CONFIG_CMD_PCI | |
| 126 | #endif | |
| 127 | ||
| 5e4b3361 SR |
128 | |
| 129 | #if (TEXT_BASE == 0xFF000000) /* Boot low with 16 MB Flash */ | |
| 130 | # define CFG_LOWBOOT 1 | |
| 131 | # define CFG_LOWBOOT16 1 | |
| 132 | #endif | |
| 133 | #if (TEXT_BASE == 0xFF800000) /* Boot low with 8 MB Flash */ | |
| 134 | # define CFG_LOWBOOT 1 | |
| 135 | # define CFG_LOWBOOT08 1 | |
| 136 | #endif | |
| 137 | ||
| 138 | /* | |
| 139 | * Autobooting | |
| 140 | */ | |
| 141 | #define CONFIG_BOOTDELAY 3 /* autoboot after 5 seconds */ | |
| 142 | ||
| 143 | #define CONFIG_PREBOOT "echo;" \ | |
| 144 | "echo Welcome to ParaFinder pf5200;" \ | |
| 145 | "echo" | |
| 146 | ||
| 147 | #undef CONFIG_BOOTARGS | |
| 148 | ||
| 149 | #define CONFIG_EXTRA_ENV_SETTINGS \ | |
| 150 | "netdev=eth0\0" \ | |
| 151 | "flash_vxworks0=run ata_vxworks_args;setenv loadaddr ff000000;bootvx\0" \ | |
| 152 | "flash_vxworks1=run ata_vxworks_args;setenv loadaddr ff200000:bootvx\0" \ | |
| fe126d8b WD |
153 | "net_vxworks=phypower 1;sleep 2;tftp ${loadaddr} ${image};run vxworks_args;bootvx\0" \ |
| 154 | "vxworks_args=setenv bootargs fec(0,0)${host}:${image} h=${serverip} e=${ipaddr} g=${gatewayip} u=${user} ${pass} tn=${target} s=${script}\0" \ | |
| 155 | "ata_vxworks_args=setenv bootargs /ata0/vxWorks h=${serverip} e=${ipaddr} g=${gatewayip} u=${user} ${pass} tn=${target} s=${script} o=fec0 \0" \ | |
| 5e4b3361 SR |
156 | "loadaddr=01000000\0" \ |
| 157 | "serverip=192.168.2.99\0" \ | |
| 158 | "gatewayip=10.0.0.79\0" \ | |
| 159 | "user=mu\0" \ | |
| 160 | "target=pf5200.esd\0" \ | |
| 161 | "script=pf5200.bat\0" \ | |
| 162 | "image=/tftpboot/vxWorks_pf5200\0" \ | |
| 163 | "ipaddr=10.0.13.196\0" \ | |
| 164 | "netmask=255.255.0.0\0" \ | |
| 165 | "" | |
| 166 | ||
| 167 | #define CONFIG_BOOTCOMMAND "run flash_vxworks0" | |
| 168 | ||
| 169 | #if defined(CONFIG_MPC5200) | |
| 170 | /* | |
| 171 | * IPB Bus clocking configuration. | |
| 172 | */ | |
| c99512d6 | 173 | #undef CFG_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */ |
| 5e4b3361 SR |
174 | #endif |
| 175 | /* | |
| 176 | * I2C configuration | |
| 177 | */ | |
| 178 | #define CONFIG_HARD_I2C 1 /* I2C with hardware support */ | |
| 179 | #define CFG_I2C_MODULE 2 /* Select I2C module #1 or #2 */ | |
| 180 | ||
| 181 | #define CFG_I2C_SPEED 86000 /* 100 kHz */ | |
| 182 | #define CFG_I2C_SLAVE 0x7F | |
| 183 | ||
| 184 | /* | |
| 185 | * EEPROM configuration | |
| 186 | */ | |
| 187 | #define CFG_I2C_EEPROM_ADDR 0x50 /* 1010000x */ | |
| 188 | #define CFG_I2C_EEPROM_ADDR_LEN 2 | |
| 189 | #define CFG_EEPROM_PAGE_WRITE_BITS 5 | |
| 190 | #define CFG_EEPROM_PAGE_WRITE_DELAY_MS 20 | |
| 191 | #define CFG_I2C_MULTI_EEPROMS 1 | |
| 192 | /* | |
| 193 | * Flash configuration | |
| 194 | */ | |
| 195 | #define CFG_FLASH_BASE 0xFE000000 | |
| 196 | #define CFG_FLASH_SIZE 0x02000000 | |
| 0e8d1586 | 197 | #define CONFIG_ENV_ADDR (CFG_FLASH_BASE + 0x00000000) |
| 5e4b3361 SR |
198 | #define CFG_MAX_FLASH_BANKS 1 /* max num of memory banks */ |
| 199 | #define CFG_MAX_FLASH_SECT 512 | |
| 200 | ||
| 201 | #define CFG_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */ | |
| 202 | #define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */ | |
| 203 | ||
| 204 | /* | |
| 205 | * Environment settings | |
| 206 | */ | |
| 207 | #if 1 /* test-only */ | |
| 5a1aceb0 | 208 | #define CONFIG_ENV_IS_IN_FLASH |
| 0e8d1586 JCPV |
209 | #define CONFIG_ENV_SIZE 0x10000 |
| 210 | #define CONFIG_ENV_SECT_SIZE 0x10000 | |
| 5e4b3361 SR |
211 | #define CONFIG_ENV_OVERWRITE 1 |
| 212 | #else | |
| bb1f8b4f | 213 | #define CONFIG_ENV_IS_IN_EEPROM 1 /* use EEPROM for environment vars */ |
| 0e8d1586 JCPV |
214 | #define CONFIG_ENV_OFFSET 0x0000 /* environment starts at the beginning of the EEPROM */ |
| 215 | #define CONFIG_ENV_SIZE 0x0400 /* 8192 bytes may be used for env vars */ | |
| 5e4b3361 SR |
216 | /* total size of a CAT24WC32 is 8192 bytes */ |
| 217 | #define CONFIG_ENV_OVERWRITE 1 | |
| 218 | #endif | |
| 219 | ||
| 220 | /* | |
| 221 | * Memory map | |
| 222 | */ | |
| 223 | #define CFG_MBAR 0xF0000000 | |
| 224 | #define CFG_SDRAM_BASE 0x00000000 | |
| 225 | #define CFG_DEFAULT_MBAR 0x80000000 | |
| 226 | ||
| 227 | /* Use SRAM until RAM will be available */ | |
| 228 | #define CFG_INIT_RAM_ADDR MPC5XXX_SRAM | |
| 229 | #define CFG_INIT_RAM_END MPC5XXX_SRAM_SIZE /* End of used area in DPRAM */ | |
| 230 | ||
| 231 | #define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ | |
| 232 | #define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) | |
| 233 | #define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET | |
| 234 | ||
| 235 | #define CFG_MONITOR_BASE TEXT_BASE | |
| 236 | #if (CFG_MONITOR_BASE < CFG_FLASH_BASE) | |
| 237 | # define CFG_RAMBOOT 1 | |
| 238 | #endif | |
| 239 | ||
| 240 | #define CFG_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */ | |
| 241 | #define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ | |
| 242 | #define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ | |
| 243 | ||
| 244 | /* | |
| 245 | * Ethernet configuration | |
| 246 | */ | |
| 247 | #define CONFIG_MPC5xxx_FEC 1 | |
| 248 | /* | |
| 249 | * Define CONFIG_FEC_10MBIT to force FEC at 10Mb | |
| 250 | */ | |
| 251 | /* #define CONFIG_FEC_10MBIT 1 */ | |
| 252 | #define CONFIG_PHY_ADDR 0x00 | |
| 253 | #define CONFIG_UDP_CHECKSUM 1 | |
| 254 | ||
| 255 | /* | |
| 256 | * GPIO configuration | |
| 257 | */ | |
| 258 | #define CFG_GPS_PORT_CONFIG 0x01052444 | |
| 259 | ||
| 260 | /* | |
| 261 | * Miscellaneous configurable options | |
| 262 | */ | |
| 263 | #define CFG_LONGHELP /* undef to save memory */ | |
| 264 | #define CFG_PROMPT "=> " /* Monitor Command Prompt */ | |
| d794cfef | 265 | #if defined(CONFIG_CMD_KGDB) |
| 5e4b3361 SR |
266 | #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ |
| 267 | #else | |
| 268 | #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ | |
| 269 | #endif | |
| 270 | #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ | |
| 271 | #define CFG_MAXARGS 16 /* max number of command args */ | |
| 272 | #define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ | |
| 273 | ||
| 274 | #define CFG_MEMTEST_START 0x00100000 /* memtest works on */ | |
| 275 | #define CFG_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */ | |
| 276 | ||
| 277 | #define CFG_LOAD_ADDR 0x100000 /* default load address */ | |
| 278 | ||
| 279 | #define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ | |
| 280 | ||
| 281 | #define CFG_VXWORKS_MAC_PTR 0x00000000 /* Pass Ethernet MAC to VxWorks */ | |
| 282 | ||
| d794cfef JL |
283 | #define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */ |
| 284 | #if defined(CONFIG_CMD_KGDB) | |
| 285 | # define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */ | |
| 286 | #endif | |
| 287 | ||
| 5e4b3361 SR |
288 | /* |
| 289 | * Various low-level settings | |
| 290 | */ | |
| 291 | #if defined(CONFIG_MPC5200) | |
| 292 | #define CFG_HID0_INIT HID0_ICE | HID0_ICFI | |
| 293 | #define CFG_HID0_FINAL HID0_ICE | |
| 294 | #else | |
| 295 | #define CFG_HID0_INIT 0 | |
| 296 | #define CFG_HID0_FINAL 0 | |
| 297 | #endif | |
| 298 | ||
| 299 | #define CFG_BOOTCS_START CFG_FLASH_BASE | |
| 300 | #define CFG_BOOTCS_SIZE CFG_FLASH_SIZE | |
| 301 | #define CFG_BOOTCS_CFG 0x0004DD00 | |
| 302 | ||
| 303 | #define CFG_CS0_START CFG_FLASH_BASE | |
| 304 | #define CFG_CS0_SIZE CFG_FLASH_SIZE | |
| 305 | ||
| 306 | #define CFG_CS1_START 0xfd000000 | |
| 307 | #define CFG_CS1_SIZE 0x00010000 | |
| 308 | #define CFG_CS1_CFG 0x10101410 | |
| 309 | ||
| 310 | #define CFG_CS_BURST 0x00000000 | |
| 311 | #define CFG_CS_DEADCYCLE 0x33333333 | |
| 312 | ||
| 313 | #define CFG_RESET_ADDRESS 0xff000000 | |
| 314 | ||
| 315 | /*----------------------------------------------------------------------- | |
| 316 | * USB stuff | |
| 317 | *----------------------------------------------------------------------- | |
| 318 | */ | |
| 319 | #define CONFIG_USB_CLOCK 0x0001BBBB | |
| 320 | #define CONFIG_USB_CONFIG 0x00001000 | |
| 321 | ||
| 322 | /*----------------------------------------------------------------------- | |
| 323 | * IDE/ATA stuff Supports IDE harddisk | |
| 324 | *----------------------------------------------------------------------- | |
| 325 | */ | |
| 326 | ||
| 327 | #undef CONFIG_IDE_8xx_PCCARD /* Use IDE with PC Card Adapter */ | |
| 328 | ||
| 329 | #undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ | |
| 330 | #undef CONFIG_IDE_LED /* LED for ide not supported */ | |
| 331 | ||
| 332 | #define CONFIG_IDE_RESET /* reset for ide supported */ | |
| 333 | #define CONFIG_IDE_PREINIT | |
| 334 | ||
| 335 | #define CFG_IDE_MAXBUS 1 /* max. 1 IDE bus */ | |
| 336 | #define CFG_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */ | |
| 337 | ||
| 338 | #define CFG_ATA_IDE0_OFFSET 0x0000 | |
| 339 | ||
| 340 | #define CFG_ATA_BASE_ADDR MPC5XXX_ATA | |
| 341 | ||
| 342 | /* Offset for data I/O */ | |
| 343 | #define CFG_ATA_DATA_OFFSET (0x0060) | |
| 344 | ||
| 345 | /* Offset for normal register accesses */ | |
| 346 | #define CFG_ATA_REG_OFFSET (CFG_ATA_DATA_OFFSET) | |
| 347 | ||
| 348 | /* Offset for alternate registers */ | |
| 349 | #define CFG_ATA_ALT_OFFSET (0x005C) | |
| 350 | ||
| 351 | /* Interval between registers */ | |
| 352 | #define CFG_ATA_STRIDE 4 | |
| 353 | ||
| 354 | /*----------------------------------------------------------------------- | |
| 355 | * CPLD stuff | |
| 356 | */ | |
| 357 | #define CFG_FPGA_XC95XL 1 /* using Xilinx XC95XL CPLD */ | |
| 358 | #define CFG_FPGA_MAX_SIZE 32*1024 /* 32kByte is enough for CPLD */ | |
| 359 | ||
| 360 | /* CPLD program pin configuration */ | |
| 361 | #define CFG_FPGA_PRG 0x20000000 /* JTAG TMS pin (ppc output) */ | |
| 362 | #define CFG_FPGA_CLK 0x10000000 /* JTAG TCK pin (ppc output) */ | |
| 363 | #define CFG_FPGA_DATA 0x20000000 /* JTAG TDO->TDI data pin (ppc output) */ | |
| 364 | #define CFG_FPGA_DONE 0x10000000 /* JTAG TDI->TDO pin (ppc input) */ | |
| 365 | ||
| 366 | #define JTAG_GPIO_ADDR_TMS (CFG_MBAR + 0xB10) /* JTAG TMS pin (GPS data out value reg.) */ | |
| 367 | #define JTAG_GPIO_ADDR_TCK (CFG_MBAR + 0xC0C) /* JTAG TCK pin (GPW data out value reg.) */ | |
| 368 | #define JTAG_GPIO_ADDR_TDI (CFG_MBAR + 0xC0C) /* JTAG TDO->TDI pin (GPW data out value reg.) */ | |
| 369 | #define JTAG_GPIO_ADDR_TDO (CFG_MBAR + 0xB14) /* JTAG TDI->TDO pin (GPS data in value reg.) */ | |
| 370 | ||
| 371 | #define JTAG_GPIO_ADDR_CFG (CFG_MBAR + 0xB00) | |
| 372 | #define JTAG_GPIO_CFG_SET 0x00000000 | |
| 373 | #define JTAG_GPIO_CFG_RESET 0x00F00000 | |
| 374 | ||
| 375 | #define JTAG_GPIO_ADDR_EN_TMS (CFG_MBAR + 0xB04) | |
| 376 | #define JTAG_GPIO_TMS_EN_SET 0x20000000 /* Enable for GPIO */ | |
| 377 | #define JTAG_GPIO_TMS_EN_RESET 0x00000000 | |
| 378 | #define JTAG_GPIO_ADDR_DDR_TMS (CFG_MBAR + 0xB0C) | |
| 379 | #define JTAG_GPIO_TMS_DDR_SET 0x20000000 /* Set as output */ | |
| 380 | #define JTAG_GPIO_TMS_DDR_RESET 0x00000000 | |
| 381 | ||
| 382 | #define JTAG_GPIO_ADDR_EN_TCK (CFG_MBAR + 0xC00) | |
| 383 | #define JTAG_GPIO_TCK_EN_SET 0x20000000 /* Enable for GPIO */ | |
| 384 | #define JTAG_GPIO_TCK_EN_RESET 0x00000000 | |
| 385 | #define JTAG_GPIO_ADDR_DDR_TCK (CFG_MBAR + 0xC08) | |
| 386 | #define JTAG_GPIO_TCK_DDR_SET 0x20000000 /* Set as output */ | |
| 387 | #define JTAG_GPIO_TCK_DDR_RESET 0x00000000 | |
| 388 | ||
| 389 | #define JTAG_GPIO_ADDR_EN_TDI (CFG_MBAR + 0xC00) | |
| 390 | #define JTAG_GPIO_TDI_EN_SET 0x10000000 /* Enable as GPIO */ | |
| 391 | #define JTAG_GPIO_TDI_EN_RESET 0x00000000 | |
| 392 | #define JTAG_GPIO_ADDR_DDR_TDI (CFG_MBAR + 0xC08) | |
| 393 | #define JTAG_GPIO_TDI_DDR_SET 0x10000000 /* Set as output */ | |
| 394 | #define JTAG_GPIO_TDI_DDR_RESET 0x00000000 | |
| 395 | ||
| 396 | #define JTAG_GPIO_ADDR_EN_TDO (CFG_MBAR + 0xB04) | |
| 397 | #define JTAG_GPIO_TDO_EN_SET 0x10000000 /* Enable as GPIO */ | |
| 398 | #define JTAG_GPIO_TDO_EN_RESET 0x00000000 | |
| 399 | #define JTAG_GPIO_ADDR_DDR_TDO (CFG_MBAR + 0xB0C) | |
| 400 | #define JTAG_GPIO_TDO_DDR_SET 0x00000000 | |
| 401 | #define JTAG_GPIO_TDO_DDR_RESET 0x10000000 /* Set as input */ | |
| 402 | ||
| 403 | #endif /* __CONFIG_H */ |