[people/ms/u-boot.git] / include / configs / pfla02.h

/*
 * Copyright (C) Stefano Babic <sbabic@denx.de>
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */


#ifndef __PCM058_CONFIG_H
#define __PCM058_CONFIG_H

#include <config_distro_defaults.h>

#ifdef CONFIG_SPL
#define CONFIG_SPL_SPI_LOAD
#define CONFIG_SYS_SPI_U_BOOT_OFFS	(64 * 1024)
#include "imx6_spl.h"
#endif

#include "mx6_common.h"

/* Thermal */
#define CONFIG_IMX_THERMAL

/* Serial */
#define CONFIG_MXC_UART
#define CONFIG_MXC_UART_BASE	       UART4_BASE
#define CONSOLE_DEV		"ttymxc3"

/* Early setup */
#define CONFIG_DISPLAY_BOARDINFO_LATE


/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN		(8 * SZ_1M)

/* Ethernet */
#define CONFIG_MII
#define IMX_FEC_BASE			ENET_BASE_ADDR
#define CONFIG_FEC_XCV_TYPE		RGMII
#define CONFIG_ETHPRIME			"FEC"
#define CONFIG_FEC_MXC_PHYADDR		3

/* SPI Flash */
#define CONFIG_MXC_SPI
#define CONFIG_SF_DEFAULT_BUS		2
#define CONFIG_SF_DEFAULT_CS		0
#define CONFIG_SF_DEFAULT_SPEED		20000000
#define CONFIG_SF_DEFAULT_MODE		SPI_MODE_0

/* I2C Configs */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 0 */
#define CONFIG_SYS_I2C_SPEED		  100000

#ifndef CONFIG_SPL_BUILD
#define CONFIG_CMD_NAND
/* Enable NAND support */
#define CONFIG_CMD_NAND_TRIMFFS
#define CONFIG_NAND_MXS
#define CONFIG_SYS_MAX_NAND_DEVICE	1
#define CONFIG_SYS_NAND_BASE		0x40000000
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_ONFI_DETECTION
#endif

/* DMA stuff, needed for GPMI/MXS NAND support */
#define CONFIG_APBH_DMA
#define CONFIG_APBH_DMA_BURST
#define CONFIG_APBH_DMA_BURST8

/* Filesystem support */
#define CONFIG_MTD_PARTITIONS
#define CONFIG_MTD_DEVICE

/* Various command support */

/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS           1
#define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR

#define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE

#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

/* MMC Configs */
#define CONFIG_SYS_FSL_ESDHC_ADDR	0
#define CONFIG_SYS_FSL_USDHC_NUM	2

/* Environment organization */
#define CONFIG_ENV_IS_IN_SPI_FLASH
#define CONFIG_ENV_SIZE                (16 * 1024)
#define CONFIG_ENV_OFFSET		(1024 * SZ_1K)
#define CONFIG_ENV_SECT_SIZE		(64 * SZ_1K)
#define CONFIG_ENV_SPI_BUS             CONFIG_SF_DEFAULT_BUS
#define CONFIG_ENV_SPI_CS              CONFIG_SF_DEFAULT_CS
#define CONFIG_ENV_SPI_MODE            CONFIG_SF_DEFAULT_MODE
#define CONFIG_ENV_SPI_MAX_HZ          CONFIG_SF_DEFAULT_SPEED
#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
#define CONFIG_ENV_OFFSET_REDUND       (CONFIG_ENV_OFFSET + \
						CONFIG_ENV_SECT_SIZE)
#define CONFIG_ENV_SIZE_REDUND         CONFIG_ENV_SIZE

#ifdef CONFIG_ENV_IS_IN_NAND
#define CONFIG_ENV_OFFSET              (0x1E0000)
#define CONFIG_ENV_SECT_SIZE           (128 * SZ_1K)
#endif

/* Default environment */
#define CONFIG_EXTRA_ENV_SETTINGS \
	"addcons=setenv bootargs ${bootargs} "				\
		"console=${console},${baudrate}\0"			\
	"addip=setenv bootargs ${bootargs} "				\
		"ip=${ipaddr}:${serverip}:${gatewayip}:"		\
		"${netmask}:${hostname}:${netdev}:off\0"		\
	"addmisc=setenv bootargs ${bootargs} ${miscargs}\0"		\
	"addmtd=run mtdnand;run mtdspi;"				\
		"setenv bootargs ${bootargs} ${mtdparts}\0"		\
	"mtdnand=setenv mtdparts mtdparts=gpmi-nand:"			\
		"40m(Kernels),400m(root),-(nand)\0"			\
	"mtdspi=setenv mtdparts ${mtdparts}"				\
		"';spi2.0:1024k(bootloader),"				\
			"64k(env1),64k(env2),-(rescue)'\0"		\
	"bootcmd=if test -n ${rescue};"					\
		"then run swupdate;fi;run nandboot;run swupdate\0"	\
	"bootfile=uImage\0"						\
	"bootimage=uImage\0"						\
	"console=ttymxc3\0"						\
	"fdt_addr_r=0x18000000\0"					\
	"fdt_file=pfla02.dtb\0"						\
	"fdt_high=0xffffffff\0"						\
	"initrd_high=0xffffffff\0"					\
	"kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0"		\
	"miscargs=panic=1 quiet\0"					\
	"mmcargs=setenv bootargs root=${mmcroot} rw rootwait\0"		\
	"mmcboot=if run mmcload;then "					\
		"run mmcargs addcons addmisc;"				\
			"bootm;fi\0"					\
	"mmcload=mmc rescan;"						\
		"load mmc 0:${mmcpart} ${kernel_addr_r} boot/fitImage\0"\
	"mmcpart=1\0"							\
	"mmcroot=/dev/mmcblk0p1\0"					\
	"ubiroot=1\0"							\
	"nandargs=setenv bootargs ubi.mtd=1 "				\
		"root=ubi0:rootfs${ubiroot} rootfstype=ubifs\0"		\
	"nandboot=run mtdnand;ubi part nand0,0;"			\
		"ubi readvol ${kernel_addr_r} kernel${ubiroot};"	\
		"run nandargs addip addcons addmtd addmisc;"		\
		"bootm ${kernel_addr_r}\0"				\
	"net_nfs=tftp ${kernel_addr_r} ${board_name}/${bootfile};"	\
		"tftp ${fdt_addr_r} ${board_name}/${fdt_file};"		\
		"run nfsargs addip addcons addmtd addmisc;"		\
		"bootm ${kernel_addr_r} - ${fdt_addr_r}\0"		\
	"net_nfs_fit=tftp ${kernel_addr_r} ${board_name}/${fitfile};"	\
		"run nfsargs addip addcons addmtd addmisc;"		\
		"bootm ${kernel_addr_r}\0"				\
	"nfsargs=setenv bootargs root=/dev/nfs"				\
		" nfsroot=${serverip}:${nfsroot},v3 panic=1\0"		\
	"swupdate=setenv bootargs root=/dev/ram;"			\
		"run addip addcons addmtd addmisc;"			\
		"sf probe;"						\
		"sf read ${kernel_addr_r} 120000 600000;"		\
		"sf read 14000000 730000 800000;"			\
		"bootm ${kernel_addr_r} 14000000\0"

#endif
Commit	Line	Data
83605d37 SB	1	/*
	2	* Copyright (C) Stefano Babic <sbabic@denx.de>
	3	*
	4	* SPDX-License-Identifier: GPL-2.0+
	5	*/
	6
	7
	8	#ifndef __PCM058_CONFIG_H
	9	#define __PCM058_CONFIG_H
	10
	11	#include <config_distro_defaults.h>
	12
	13	#ifdef CONFIG_SPL
	14	#define CONFIG_SPL_SPI_LOAD
	15	#define CONFIG_SYS_SPI_U_BOOT_OFFS (64 * 1024)
	16	#include "imx6_spl.h"
	17	#endif
	18
	19	#include "mx6_common.h"
	20
	21	/* Thermal */
	22	#define CONFIG_IMX_THERMAL
	23
	24	/* Serial */
	25	#define CONFIG_MXC_UART
	26	#define CONFIG_MXC_UART_BASE UART4_BASE
	27	#define CONSOLE_DEV "ttymxc3"
	28
	29	/* Early setup */
	30	#define CONFIG_DISPLAY_BOARDINFO_LATE
	31
	32
	33	/* Size of malloc() pool */
	34	#define CONFIG_SYS_MALLOC_LEN (8 * SZ_1M)
	35
	36	/* Ethernet */
83605d37 SB	37	#define CONFIG_MII
	38	#define IMX_FEC_BASE ENET_BASE_ADDR
	39	#define CONFIG_FEC_XCV_TYPE RGMII
	40	#define CONFIG_ETHPRIME "FEC"
	41	#define CONFIG_FEC_MXC_PHYADDR 3
	42
83605d37 SB	43	/* SPI Flash */
	44	#define CONFIG_MXC_SPI
	45	#define CONFIG_SF_DEFAULT_BUS 2
	46	#define CONFIG_SF_DEFAULT_CS 0
	47	#define CONFIG_SF_DEFAULT_SPEED 20000000
	48	#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0
	49
	50	/* I2C Configs */
	51	#define CONFIG_SYS_I2C
	52	#define CONFIG_SYS_I2C_MXC
	53	#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 0 */
	54	#define CONFIG_SYS_I2C_SPEED 100000
	55
	56	#ifndef CONFIG_SPL_BUILD
	57	#define CONFIG_CMD_NAND
	58	/* Enable NAND support */
	59	#define CONFIG_CMD_NAND_TRIMFFS
	60	#define CONFIG_NAND_MXS
	61	#define CONFIG_SYS_MAX_NAND_DEVICE 1
	62	#define CONFIG_SYS_NAND_BASE 0x40000000
	63	#define CONFIG_SYS_NAND_5_ADDR_CYCLE
	64	#define CONFIG_SYS_NAND_ONFI_DETECTION
	65	#endif
	66
	67	/* DMA stuff, needed for GPMI/MXS NAND support */
	68	#define CONFIG_APBH_DMA
	69	#define CONFIG_APBH_DMA_BURST
	70	#define CONFIG_APBH_DMA_BURST8
	71
	72	/* Filesystem support */
	73	#define CONFIG_MTD_PARTITIONS
	74	#define CONFIG_MTD_DEVICE
83605d37 SB	75
	76	/* Various command support */
	77
	78	/* Physical Memory Map */
	79	#define CONFIG_NR_DRAM_BANKS 1
	80	#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
	81
	82	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
	83	#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
	84	#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
	85
	86	#define CONFIG_SYS_INIT_SP_OFFSET \
	87	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
	88	#define CONFIG_SYS_INIT_SP_ADDR \
	89	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
	90
	91	/* MMC Configs */
	92	#define CONFIG_SYS_FSL_ESDHC_ADDR 0
	93	#define CONFIG_SYS_FSL_USDHC_NUM 2
	94
	95	/* Environment organization */
	96	#define CONFIG_ENV_IS_IN_SPI_FLASH
	97	#define CONFIG_ENV_SIZE (16 * 1024)
	98	#define CONFIG_ENV_OFFSET (1024 * SZ_1K)
	99	#define CONFIG_ENV_SECT_SIZE (64 * SZ_1K)
	100	#define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS
	101	#define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS
	102	#define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE
	103	#define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
	104	#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
	105	#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + \
	106	CONFIG_ENV_SECT_SIZE)
	107	#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
	108
	109	#ifdef CONFIG_ENV_IS_IN_NAND
	110	#define CONFIG_ENV_OFFSET (0x1E0000)
	111	#define CONFIG_ENV_SECT_SIZE (128 * SZ_1K)
	112	#endif
	113
	114	/* Default environment */
	115	#define CONFIG_EXTRA_ENV_SETTINGS \
	116	"addcons=setenv bootargs ${bootargs} " \
	117	"console=${console},${baudrate}\0" \
	118	"addip=setenv bootargs ${bootargs} " \
	119	"ip=${ipaddr}:${serverip}:${gatewayip}:" \
	120	"${netmask}:${hostname}:${netdev}:off\0" \
	121	"addmisc=setenv bootargs ${bootargs} ${miscargs}\0" \
	122	"addmtd=run mtdnand;run mtdspi;" \
	123	"setenv bootargs ${bootargs} ${mtdparts}\0" \
	124	"mtdnand=setenv mtdparts mtdparts=gpmi-nand:" \
	125	"40m(Kernels),400m(root),-(nand)\0" \
	126	"mtdspi=setenv mtdparts ${mtdparts}" \
	127	"';spi2.0:1024k(bootloader)," \
	128	"64k(env1),64k(env2),-(rescue)'\0" \
	129	"bootcmd=if test -n ${rescue};" \
	130	"then run swupdate;fi;run nandboot;run swupdate\0" \
	131	"bootfile=uImage\0" \
	132	"bootimage=uImage\0" \
	133	"console=ttymxc3\0" \
	134	"fdt_addr_r=0x18000000\0" \
	135	"fdt_file=pfla02.dtb\0" \
	136	"fdt_high=0xffffffff\0" \
	137	"initrd_high=0xffffffff\0" \
	138	"kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
139	"miscargs=panic=1 quiet\0" \
140	"mmcargs=setenv bootargs root=${mmcroot} rw rootwait\0" \
141	"mmcboot=if run mmcload;then " \
142	"run mmcargs addcons addmisc;" \
143	"bootm;fi\0" \
144	"mmcload=mmc rescan;" \
145	"load mmc 0:${mmcpart} ${kernel_addr_r} boot/fitImage\0"\
146	"mmcpart=1\0" \
147	"mmcroot=/dev/mmcblk0p1\0" \
148	"ubiroot=1\0" \
149	"nandargs=setenv bootargs ubi.mtd=1 " \
150	"root=ubi0:rootfs${ubiroot} rootfstype=ubifs\0" \
151	"nandboot=run mtdnand;ubi part nand0,0;" \
152	"ubi readvol ${kernel_addr_r} kernel${ubiroot};" \
153	"run nandargs addip addcons addmtd addmisc;" \
154	"bootm ${kernel_addr_r}\0" \
155	"net_nfs=tftp ${kernel_addr_r} ${board_name}/${bootfile};" \
156	"tftp ${fdt_addr_r} ${board_name}/${fdt_file};" \
157	"run nfsargs addip addcons addmtd addmisc;" \
158	"bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \
159	"net_nfs_fit=tftp ${kernel_addr_r} ${board_name}/${fitfile};" \
160	"run nfsargs addip addcons addmtd addmisc;" \
161	"bootm ${kernel_addr_r}\0" \
162	"nfsargs=setenv bootargs root=/dev/nfs" \
163	" nfsroot=${serverip}:${nfsroot},v3 panic=1\0" \
164	"swupdate=setenv bootargs root=/dev/ram;" \
165	"run addip addcons addmtd addmisc;" \
166	"sf probe;" \
167	"sf read ${kernel_addr_r} 120000 600000;" \
168	"sf read 14000000 730000 800000;" \
169	"bootm ${kernel_addr_r} 14000000\0"
170
171	#endif