[people/ms/u-boot.git] / include / configs / pico-imx6ul.h

/*
 * Copyright (C) 2015 Technexion Ltd.
 *
 * Configuration settings for the Technexion PICO-IMX6UL-EMMC board.
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */
#ifndef __PICO_IMX6UL_CONFIG_H
#define __PICO_IMX6UL_CONFIG_H


#include <asm/arch/imx-regs.h>
#include <linux/sizes.h>
#include "mx6_common.h"
#include <asm/mach-imx/gpio.h>

/* Network support */

#define CONFIG_FEC_MXC
#define CONFIG_MII
#define IMX_FEC_BASE			ENET2_BASE_ADDR
#define CONFIG_FEC_MXC_PHYADDR		0x1
#define CONFIG_FEC_XCV_TYPE		RMII

/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN		(35 * SZ_1M) /* Increase due to DFU */

#define CONFIG_MXC_UART
#define CONFIG_MXC_UART_BASE		UART6_BASE_ADDR

/* MMC Configs */
#define CONFIG_FSL_USDHC
#define CONFIG_FSL_ESDHC
#define CONFIG_SYS_FSL_ESDHC_ADDR	USDHC1_BASE_ADDR
#define CONFIG_SUPPORT_EMMC_BOOT

/* USB Configs */
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
#define CONFIG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS		0
#define CONFIG_USB_MAX_CONTROLLER_COUNT	2

#define CONFIG_USBD_HS

#define CONFIG_USB_FUNCTION_MASS_STORAGE
#define CONFIG_USB_GADGET_VBUS_DRAW	2

#define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_16M
#define DFU_DEFAULT_POLL_TIMEOUT 300

#define CONFIG_SYS_MMC_IMG_LOAD_PART	1

#define CONFIG_EXTRA_ENV_SETTINGS \
	"image=zImage\0" \
	"console=ttymxc5\0" \
	"fdt_high=0xffffffff\0" \
	"initrd_high=0xffffffff\0" \
	"fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
	"fdt_addr=0x83000000\0" \
	"mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
	"mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
	"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
	"mmcautodetect=yes\0" \
	"dfu_alt_info=boot raw 0x2 0x400 mmcpart 1\0" \
	"mmcargs=setenv bootargs console=${console},${baudrate} " \
		"root=${mmcroot}\0" \
	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
	"mmcboot=echo Booting from mmc ...; " \
		"run mmcargs; " \
		"if run loadfdt; then " \
			"bootz ${loadaddr} - ${fdt_addr}; " \
		"else " \
			"echo WARN: Cannot load the DT; " \
		"fi;\0" \
	"netargs=setenv bootargs console=${console},${baudrate} " \
		"root=/dev/nfs " \
	"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
		"netboot=echo Booting from net ...; " \
		"run netargs; " \
		"if test ${ip_dyn} = yes; then " \
			"setenv get_cmd dhcp; " \
		"else " \
			"setenv get_cmd tftp; " \
		"fi; " \
		"${get_cmd} ${image}; " \
		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
			"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
				"bootz ${loadaddr} - ${fdt_addr}; " \
			"else " \
				"if test ${boot_fdt} = try; then " \
					"bootz; " \
				"else " \
					"echo WARN: Cannot load the DT; " \
				"fi; " \
			"fi; " \
		"else " \
			"bootz; " \
		"fi;\0" \

#define CONFIG_BOOTCOMMAND \
	   "if mmc rescan; then " \
		   "if run loadimage; then " \
			   "run mmcboot; " \
		   "else run netboot; " \
		   "fi; " \
	   "else run netboot; fi"

#define CONFIG_SYS_MEMTEST_START	0x80000000
#define CONFIG_SYS_MEMTEST_END		CONFIG_SYS_MEMTEST_START + SZ_128M

#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
#define CONFIG_SYS_HZ			1000

#define CONFIG_CMDLINE_EDITING

/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS		1
#define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR

#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE

#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

/* I2C configs */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_MXC_I2C1
#define CONFIG_SYS_I2C_SPEED		100000

/* PMIC */
#define CONFIG_POWER
#define CONFIG_POWER_I2C
#define CONFIG_POWER_PFUZE3000
#define CONFIG_POWER_PFUZE3000_I2C_ADDR	0x08

/* environment organization */
#define CONFIG_ENV_SIZE			SZ_8K
#define CONFIG_ENV_OFFSET		(8 * SZ_64K)

#define CONFIG_SYS_MMC_ENV_DEV		0
#define CONFIG_SYS_MMC_ENV_PART		0
#define CONFIG_MMCROOT			"/dev/mmcblk0p2"

#endif /* __PICO_IMX6UL_CONFIG_H */
Commit	Line	Data
69cc7dbf FE	1	/*
	2	* Copyright (C) 2015 Technexion Ltd.
	3	*
	4	* Configuration settings for the Technexion PICO-IMX6UL-EMMC board.
	5	*
	6	* SPDX-License-Identifier: GPL-2.0+
	7	*/
	8	#ifndef __PICO_IMX6UL_CONFIG_H
	9	#define __PICO_IMX6UL_CONFIG_H
	10
	11
	12	#include <asm/arch/imx-regs.h>
	13	#include <linux/sizes.h>
	14	#include "mx6_common.h"
552a848e	15	#include <asm/mach-imx/gpio.h>
69cc7dbf	16
6d7aa51a DD	17	/* Network support */
	18
	19	#define CONFIG_FEC_MXC
	20	#define CONFIG_MII
	21	#define IMX_FEC_BASE ENET2_BASE_ADDR
	22	#define CONFIG_FEC_MXC_PHYADDR 0x1
	23	#define CONFIG_FEC_XCV_TYPE RMII
6d7aa51a	24
69cc7dbf	25	/* Size of malloc() pool */
af07d154	26	#define CONFIG_SYS_MALLOC_LEN (35 * SZ_1M) /* Increase due to DFU */
69cc7dbf	27
69cc7dbf FE	28	#define CONFIG_MXC_UART
	29	#define CONFIG_MXC_UART_BASE UART6_BASE_ADDR
	30
	31	/* MMC Configs */
	32	#define CONFIG_FSL_USDHC
	33	#define CONFIG_FSL_ESDHC
	34	#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC1_BASE_ADDR
69cc7dbf FE	35	#define CONFIG_SUPPORT_EMMC_BOOT
	36
	37	/* USB Configs */
69cc7dbf FE	38	#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
	39	#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI \| PORT_PTS_PTW)
	40	#define CONFIG_MXC_USB_FLAGS 0
ca103e09	41	#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
69cc7dbf	42
69cc7dbf	43	#define CONFIG_USBD_HS
69cc7dbf	44
69cc7dbf	45	#define CONFIG_USB_FUNCTION_MASS_STORAGE
69cc7dbf FE	46	#define CONFIG_USB_GADGET_VBUS_DRAW 2
69cc7dbf FE	47
af07d154 VM	48	#define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_16M
	49	#define DFU_DEFAULT_POLL_TIMEOUT 300
	50
69cc7dbf FE	51	#define CONFIG_SYS_MMC_IMG_LOAD_PART 1
	52
	53	#define CONFIG_EXTRA_ENV_SETTINGS \
	54	"image=zImage\0" \
	55	"console=ttymxc5\0" \
	56	"fdt_high=0xffffffff\0" \
	57	"initrd_high=0xffffffff\0" \
	58	"fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
	59	"fdt_addr=0x83000000\0" \
	60	"mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
	61	"mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
	62	"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
	63	"mmcautodetect=yes\0" \
af07d154	64	"dfu_alt_info=boot raw 0x2 0x400 mmcpart 1\0" \
69cc7dbf FE	65	"mmcargs=setenv bootargs console=${console},${baudrate} " \
	66	"root=${mmcroot}\0" \
	67	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
	68	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
	69	"mmcboot=echo Booting from mmc ...; " \
	70	"run mmcargs; " \
	71	"if run loadfdt; then " \
	72	"bootz ${loadaddr} - ${fdt_addr}; " \
	73	"else " \
	74	"echo WARN: Cannot load the DT; " \
d0daec67 DD	75	"fi;\0" \
	76	"netargs=setenv bootargs console=${console},${baudrate} " \
	77	"root=/dev/nfs " \
	78	"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
	79	"netboot=echo Booting from net ...; " \
	80	"run netargs; " \
	81	"if test ${ip_dyn} = yes; then " \
	82	"setenv get_cmd dhcp; " \
	83	"else " \
	84	"setenv get_cmd tftp; " \
	85	"fi; " \
	86	"${get_cmd} ${image}; " \
	87	"if test ${boot_fdt} = yes \|\| test ${boot_fdt} = try; then " \
	88	"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
	89	"bootz ${loadaddr} - ${fdt_addr}; " \
	90	"else " \
	91	"if test ${boot_fdt} = try; then " \
	92	"bootz; " \
	93	"else " \
	94	"echo WARN: Cannot load the DT; " \
	95	"fi; " \
	96	"fi; " \
	97	"else " \
	98	"bootz; " \
	99	"fi;\0" \
69cc7dbf FE	100
	101	#define CONFIG_BOOTCOMMAND \
	102	"if mmc rescan; then " \
	103	"if run loadimage; then " \
	104	"run mmcboot; " \
	105	"else run netboot; " \
	106	"fi; " \
	107	"else run netboot; fi"
	108
69cc7dbf FE	109	#define CONFIG_SYS_MEMTEST_START 0x80000000
	110	#define CONFIG_SYS_MEMTEST_END CONFIG_SYS_MEMTEST_START + SZ_128M
	111
	112	#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
	113	#define CONFIG_SYS_HZ 1000
	114
	115	#define CONFIG_CMDLINE_EDITING
69cc7dbf FE	116
	117	/* Physical Memory Map */
	118	#define CONFIG_NR_DRAM_BANKS 1
	119	#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
	120
	121	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
	122	#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
	123	#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
	124
	125	#define CONFIG_SYS_INIT_SP_OFFSET \
	126	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
	127	#define CONFIG_SYS_INIT_SP_ADDR \
	128	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
	129
88e4774e VM	130	/* I2C configs */
	131	#define CONFIG_SYS_I2C
	132	#define CONFIG_SYS_I2C_MXC
	133	#define CONFIG_SYS_I2C_MXC_I2C1
	134	#define CONFIG_SYS_I2C_SPEED 100000
	135
	136	/* PMIC */
	137	#define CONFIG_POWER
	138	#define CONFIG_POWER_I2C
	139	#define CONFIG_POWER_PFUZE3000
	140	#define CONFIG_POWER_PFUZE3000_I2C_ADDR 0x08
	141
e856bdcf	142	/* environment organization */
69cc7dbf	143	#define CONFIG_ENV_SIZE SZ_8K
69cc7dbf FE	144	#define CONFIG_ENV_OFFSET (8 * SZ_64K)
	145
	146	#define CONFIG_SYS_MMC_ENV_DEV 0
	147	#define CONFIG_SYS_MMC_ENV_PART 0
	148	#define CONFIG_MMCROOT "/dev/mmcblk0p2"
	149
69cc7dbf	150	#endif /* __PICO_IMX6UL_CONFIG_H */