[people/ms/u-boot.git] / include / configs / platinum.h

/*
 * Copyright (C) 2014, Barco (www.barco.com)
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __PLATINUM_CONFIG_H__
#define __PLATINUM_CONFIG_H__

/* SPL */

/* Location in NAND to read U-Boot from */
#define CONFIG_SYS_NAND_U_BOOT_OFFS     (14 * 1024 * 1024)

#include "imx6_spl.h"                  /* common IMX6 SPL configuration */
#include "mx6_common.h"

/*
 * Console configuration
 */

#define CONFIG_CMD_MTDPARTS
#define CONFIG_CMD_NAND
#define CONFIG_CMD_NAND_TRIMFFS
#define CONFIG_CMD_UBIFS

/*
 * Hardware configuration
 */

/* UART config */
#define CONFIG_MXC_UART
#define CONFIG_MXC_UART_BASE			UART1_BASE

/* I2C config */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
#define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
#define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
#define CONFIG_SYS_I2C_SPEED			100000

/* MMC config */
#define CONFIG_SYS_FSL_ESDHC_ADDR		0
#define CONFIG_SYS_FSL_USDHC_NUM		1

/* Ethernet config */
#define CONFIG_FEC_MXC
#define CONFIG_MII
#define IMX_FEC_BASE				ENET_BASE_ADDR

#define CONFIG_PHYLIB

/* USB config */
#define CONFIG_MXC_USB_PORT			1
#define CONFIG_MXC_USB_PORTSC			(PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS			0

/* Memory config */
#define CONFIG_NR_DRAM_BANKS			1
#define PHYS_SDRAM				MMDC0_ARB_BASE_ADDR
#ifndef PHYS_SDRAM_SIZE
#define PHYS_SDRAM_SIZE				(1024 << 20)
#endif

#define CONFIG_SYS_SDRAM_BASE			PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR		IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE		IRAM_SIZE

#define CONFIG_SYS_INIT_SP_OFFSET		(CONFIG_SYS_INIT_RAM_SIZE - \
						 GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR			(CONFIG_SYS_INIT_RAM_ADDR + \
						 CONFIG_SYS_INIT_SP_OFFSET)

#define CONFIG_SYS_MALLOC_LEN			(16 * 1024 * 1024)

#ifdef CONFIG_CMD_NAND

/* NAND config */
#define CONFIG_NAND_MXS
#ifndef CONFIG_SYS_NAND_MAX_CHIPS
#define CONFIG_SYS_NAND_MAX_CHIPS		2
#endif
#define CONFIG_SYS_MAX_NAND_DEVICE		1
#define CONFIG_SYS_NAND_BASE			0x40000000
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_ONFI_DETECTION

/* DMA config, needed for GPMI/MXS NAND support */
#define CONFIG_APBH_DMA
#define CONFIG_APBH_DMA_BURST
#define CONFIG_APBH_DMA_BURST8

/* Environment in NAND */
#define CONFIG_ENV_IS_IN_NAND
#define CONFIG_ENV_OFFSET		(16 << 20)
#define CONFIG_ENV_SECT_SIZE		(128 << 10)
#define CONFIG_ENV_SIZE			CONFIG_ENV_SECT_SIZE
#define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET + (512 << 10))
#define CONFIG_ENV_SIZE_REDUND		CONFIG_ENV_SIZE

#else /* CONFIG_CMD_NAND */

/* Environment in MMC */
#define CONFIG_ENV_SIZE			(8 << 10)
#define CONFIG_ENV_IS_IN_MMC
#define CONFIG_ENV_OFFSET		(6 * 64 * 1024)
#define CONFIG_SYS_MMC_ENV_DEV		0

#endif /* CONFIG_CMD_NAND */

/*
 * U-Boot configuration
 */

/* Board startup config */
#define CONFIG_MISC_INIT_R

#define CONFIG_SYS_MEMTEST_START		PHYS_SDRAM
#define CONFIG_SYS_MEMTEST_END			(CONFIG_SYS_MEMTEST_START + \
						 PHYS_SDRAM_SIZE - (12 << 20))

#define CONFIG_BOOTCOMMAND			"run bootubi_scr"

/* Miscellaneous configurable options */
#define CONFIG_PREBOOT

/* Print Buffer Size */
#define CONFIG_SYS_PBSIZE			(CONFIG_SYS_CBSIZE + \
						 sizeof(CONFIG_SYS_PROMPT) + 16)

/* MTD/UBI/UBIFS config */
#define CONFIG_LZO
#define CONFIG_MTD_DEVICE
#define CONFIG_MTD_PARTITIONS
#define CONFIG_RBTREE

#if (CONFIG_SYS_NAND_MAX_CHIPS == 1)
#define MTDIDS_DEFAULT		"nand0=gpmi-nand"
#define MTDPARTS_DEFAULT	"mtdparts=gpmi-nand:14M(spl),2M(uboot)," \
				"512k(env1),512k(env2),-(ubi)"
#elif (CONFIG_SYS_NAND_MAX_CHIPS == 2)
#define MTDIDS_DEFAULT		"nand0=gpmi-nand"
#define MTDPARTS_DEFAULT	"mtdparts=gpmi-nand:14M(spl),2M(uboot)," \
				"512k(env1),512k(env2),495M(ubi0)," \
				"14M(res0),2M(res1)," \
				"512k(res2),512k(res3),-(ubi1)"
#endif

/*
 * Environment configuration
 */

#if (CONFIG_SYS_NAND_MAX_CHIPS == 1)
#define CONFIG_COMMON_ENV_UBI						\
	"setubipartition=env set ubipartition ubi\0"			\
	"setubirfs=env set ubirfs $ubipartition:rootfs$boot_vol\0"
#elif (CONFIG_SYS_NAND_MAX_CHIPS == 2)
#define CONFIG_COMMON_ENV_UBI						\
	"setubipartition=env set ubipartition ubi$boot_vol\0"		\
	"setubirfs=env set ubirfs ubi0:rootfs\0"
#endif

#define CONFIG_COMMON_ENV_MISC						\
	"user=user\0"							\
	"project="CONFIG_PLATINUM_PROJECT"\0"				\
	"uimage=uImage\0"						\
	"dtb="CONFIG_PLATINUM_CPU"-platinum-"CONFIG_PLATINUM_PROJECT".dtb\0" \
	"serverip=serverip\0"						\
	"memaddrlinux=0x10800000\0"					\
	"memaddrsrc=0x11000000\0"					\
	"memaddrdtb=0x12000000\0"					\
	"console=ttymxc0\0"						\
	"baudrate=115200\0"						\
	"boot_scr=boot.uboot\0"						\
	"boot_vol=0\0"							\
	"mtdids="MTDIDS_DEFAULT"\0"					\
	"mtdparts="MTDPARTS_DEFAULT"\0"					\
	"mmcfs=ext2\0"							\
	"mmcrootpart=1\0"						\
	\
	"setnfspath=env set nfspath /home/nfs/$user/$project/root\0"	\
	"settftpfilelinux=env set tftpfilelinux $user/$project/$uimage\0" \
	"settftpfiledtb=env set tftpfiledtb $user/$project/$dtb\0"	\
	"setubifilelinux=env set ubifilelinux boot/$uimage\0"		\
	"setubipfiledtb=env set ubifiledtb boot/$dtb\0"			\
	"setmmcrootdev=env set mmcrootdev /dev/mmcblk0p$mmcrootpart\0"	\
	"setmmcfilelinux=env set mmcfilelinux /boot/$uimage\0"		\
	"setmmcfiledtb=env set mmcfiledtb /boot/$dtb\0"			\
	\
	"loadtftpkernel=dhcp $memaddrlinux $tftpfilelinux\0"		\
	"loadtftpdtb=dhcp $memaddrdtb $tftpfiledtb\0"			\
	"loadubikernel=ubifsload $memaddrlinux $ubifilelinux\0"		\
	"loadubidtb=ubifsload $memaddrdtb $ubifiledtb\0"		\
	"loadmmckernel=${mmcfs}load mmc 0:$mmcrootpart $memaddrlinux "	\
		"$mmcfilelinux\0"					\
	"loadmmcdtb=${mmcfs}load mmc 0:$mmcrootpart $memaddrdtb "	\
		"$mmcfiledtb\0"						\
	\
	"ubipart=ubi part $ubipartition\0"				\
	"ubimount=ubifsmount $ubirfs\0"					\
	\
	"setbootargscommon=env set bootargs $bootargs "			\
		"console=$console,$baudrate enable_wait_mode=off\0"	\
	"setbootargsmtd=env set bootargs $bootargs $mtdparts\0"		\
	"setbootargsdhcp=env set bootargs $bootargs ip=dhcp\0"		\
	"setbootargsubirfs=env set bootargs $bootargs "			\
		"ubi.mtd=$ubipartition root=$ubirfs rootfstype=ubifs\0" \
	"setbootargsnfsrfs=env set bootargs $bootargs root=/dev/nfs "	\
		"nfsroot=$serverip:$nfspath,v3,tcp\0"			\
	"setbootargsmmcrfs=env set bootargs $bootargs "			\
		"root=$mmcrootdev rootwait rw\0"			\
	\
	"bootnet=run settftpfilelinux settftpfiledtb setnfspath "	\
		"setbootargscommon setbootargsmtd setbootargsdhcp "	\
			"setbootargsnfsrfs;"				\
			"run loadtftpkernel loadtftpdtb;"		\
			"bootm $memaddrlinux - $memaddrdtb\0"		\
	"bootnet_ubirfs=run settftpfilelinux settftpfiledtb;"		\
			"run setubipartition setubirfs;"		\
			"run setbootargscommon setbootargsmtd "		\
				"setbootargsubirfs;"			\
			"run loadtftpkernel loadtftpdtb;"		\
			"bootm $memaddrlinux - $memaddrdtb\0"		\
	"bootubi=run setubipartition setubirfs setubifilelinux "	\
				"setubipfiledtb;"			\
			"run setbootargscommon setbootargsmtd "		\
				"setbootargsubirfs;"			\
			"run ubipart ubimount loadubikernel loadubidtb;" \
			"bootm $memaddrlinux - $memaddrdtb\0"		\
	"bootubi_scr=run setubipartition setubirfs;"			\
			"run ubipart ubimount;"				\
			"if ubifsload ${memaddrsrc} boot/${boot_scr}; "	\
			"then source ${memaddrsrc}; else run bootubi; fi\0" \
	"bootmmc=run setmmcrootdev setmmcfilelinux setmmcfiledtb "	\
			"setbootargscommon setbootargsmmcrfs;"		\
			"run loadmmckernel loadmmcdtb;"			\
			"bootm $memaddrlinux - $memaddrdtb\0"		\
	\
	"bootcmd="CONFIG_BOOTCOMMAND"\0"

#define CONFIG_COMMON_ENV_SETTINGS			CONFIG_COMMON_ENV_MISC \
							CONFIG_COMMON_ENV_UBI
#endif /* __PLATINUM_CONFIG_H__ */
Commit	Line	Data
5d6050fd SR	1	/*
	2	* Copyright (C) 2014, Barco (www.barco.com)
	3	*
	4	* SPDX-License-Identifier: GPL-2.0+
	5	*/
	6
	7	#ifndef __PLATINUM_CONFIG_H__
	8	#define __PLATINUM_CONFIG_H__
	9
5d6050fd	10	/* SPL */
5d6050fd SR	11
	12	/* Location in NAND to read U-Boot from */
	13	#define CONFIG_SYS_NAND_U_BOOT_OFFS (14 * 1024 * 1024)
	14
	15	#include "imx6_spl.h" /* common IMX6 SPL configuration */
	16	#include "mx6_common.h"
5d6050fd SR	17
	18	/*
	19	* Console configuration
	20	*/
	21
5d6050fd SR	22	#define CONFIG_CMD_MTDPARTS
	23	#define CONFIG_CMD_NAND
	24	#define CONFIG_CMD_NAND_TRIMFFS
5d6050fd	25	#define CONFIG_CMD_UBIFS
5d6050fd SR	26
	27	/*
	28	* Hardware configuration
	29	*/
	30
5d6050fd SR	31	/* UART config */
	32	#define CONFIG_MXC_UART
	33	#define CONFIG_MXC_UART_BASE UART1_BASE
5d6050fd SR	34
	35	/* I2C config */
	36	#define CONFIG_SYS_I2C
	37	#define CONFIG_SYS_I2C_MXC
03544c66 AA	38	#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
03544c66 AA	39	#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
f8cb101e	40	#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
5d6050fd SR	41	#define CONFIG_SYS_I2C_SPEED 100000
	42
	43	/* MMC config */
5d6050fd SR	44	#define CONFIG_SYS_FSL_ESDHC_ADDR 0
5d6050fd SR	45	#define CONFIG_SYS_FSL_USDHC_NUM 1
5d6050fd SR	46
	47	/* Ethernet config */
	48	#define CONFIG_FEC_MXC
	49	#define CONFIG_MII
	50	#define IMX_FEC_BASE ENET_BASE_ADDR
	51
	52	#define CONFIG_PHYLIB
	53
	54	/* USB config */
5d6050fd SR	55	#define CONFIG_MXC_USB_PORT 1
	56	#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI \| PORT_PTS_PTW)
	57	#define CONFIG_MXC_USB_FLAGS 0
	58
	59	/* Memory config */
	60	#define CONFIG_NR_DRAM_BANKS 1
	61	#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
	62	#ifndef PHYS_SDRAM_SIZE
	63	#define PHYS_SDRAM_SIZE (1024 << 20)
	64	#endif
	65
	66	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
	67	#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
	68	#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
	69
	70	#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \
	71	GENERATED_GBL_DATA_SIZE)
	72	#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
	73	CONFIG_SYS_INIT_SP_OFFSET)
	74
	75	#define CONFIG_SYS_MALLOC_LEN (16 * 1024 * 1024)
	76
5d6050fd SR	77	#ifdef CONFIG_CMD_NAND
	78
	79	/* NAND config */
	80	#define CONFIG_NAND_MXS
	81	#ifndef CONFIG_SYS_NAND_MAX_CHIPS
	82	#define CONFIG_SYS_NAND_MAX_CHIPS 2
	83	#endif
	84	#define CONFIG_SYS_MAX_NAND_DEVICE 1
	85	#define CONFIG_SYS_NAND_BASE 0x40000000
	86	#define CONFIG_SYS_NAND_5_ADDR_CYCLE
	87	#define CONFIG_SYS_NAND_ONFI_DETECTION
	88
	89	/* DMA config, needed for GPMI/MXS NAND support */
	90	#define CONFIG_APBH_DMA
	91	#define CONFIG_APBH_DMA_BURST
	92	#define CONFIG_APBH_DMA_BURST8
	93
5d6050fd SR	94	/* Environment in NAND */
	95	#define CONFIG_ENV_IS_IN_NAND
	96	#define CONFIG_ENV_OFFSET (16 << 20)
	97	#define CONFIG_ENV_SECT_SIZE (128 << 10)
	98	#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
	99	#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + (512 << 10))
	100	#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
	101
	102	#else /* CONFIG_CMD_NAND */
	103
	104	/* Environment in MMC */
	105	#define CONFIG_ENV_SIZE (8 << 10)
	106	#define CONFIG_ENV_IS_IN_MMC
	107	#define CONFIG_ENV_OFFSET (6 * 64 * 1024)
	108	#define CONFIG_SYS_MMC_ENV_DEV 0
	109
	110	#endif /* CONFIG_CMD_NAND */
	111
	112	/*
	113	* U-Boot configuration
	114	*/
	115
5d6050fd	116	/* Board startup config */
5d6050fd SR	117	#define CONFIG_MISC_INIT_R
5d6050fd SR	118
5d6050fd SR	119	#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
	120	#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + \
	121	PHYS_SDRAM_SIZE - (12 << 20))
	122
5d6050fd SR	123	#define CONFIG_BOOTCOMMAND "run bootubi_scr"
	124
	125	/* Miscellaneous configurable options */
5d6050fd SR	126	#define CONFIG_PREBOOT
5d6050fd SR	127
5d6050fd SR	128	/* Print Buffer Size */
	129	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
	130	sizeof(CONFIG_SYS_PROMPT) + 16)
5d6050fd	131
5d6050fd SR	132	/* MTD/UBI/UBIFS config */
	133	#define CONFIG_LZO
	134	#define CONFIG_MTD_DEVICE
	135	#define CONFIG_MTD_PARTITIONS
	136	#define CONFIG_RBTREE
	137
	138	#if (CONFIG_SYS_NAND_MAX_CHIPS == 1)
	139	#define MTDIDS_DEFAULT "nand0=gpmi-nand"
	140	#define MTDPARTS_DEFAULT "mtdparts=gpmi-nand:14M(spl),2M(uboot)," \
	141	"512k(env1),512k(env2),-(ubi)"
	142	#elif (CONFIG_SYS_NAND_MAX_CHIPS == 2)
	143	#define MTDIDS_DEFAULT "nand0=gpmi-nand"
	144	#define MTDPARTS_DEFAULT "mtdparts=gpmi-nand:14M(spl),2M(uboot)," \
	145	"512k(env1),512k(env2),495M(ubi0)," \
	146	"14M(res0),2M(res1)," \
	147	"512k(res2),512k(res3),-(ubi1)"
	148	#endif
	149
5d6050fd SR	150	/*
	151	* Environment configuration
	152	*/
	153
	154	#if (CONFIG_SYS_NAND_MAX_CHIPS == 1)
	155	#define CONFIG_COMMON_ENV_UBI \
	156	"setubipartition=env set ubipartition ubi\0" \
	157	"setubirfs=env set ubirfs $ubipartition:rootfs$boot_vol\0"
	158	#elif (CONFIG_SYS_NAND_MAX_CHIPS == 2)
	159	#define CONFIG_COMMON_ENV_UBI \
	160	"setubipartition=env set ubipartition ubi$boot_vol\0" \
	161	"setubirfs=env set ubirfs ubi0:rootfs\0"
	162	#endif
	163
	164	#define CONFIG_COMMON_ENV_MISC \
	165	"user=user\0" \
	166	"project="CONFIG_PLATINUM_PROJECT"\0" \
	167	"uimage=uImage\0" \
	168	"dtb="CONFIG_PLATINUM_CPU"-platinum-"CONFIG_PLATINUM_PROJECT".dtb\0" \
	169	"serverip=serverip\0" \
	170	"memaddrlinux=0x10800000\0" \
	171	"memaddrsrc=0x11000000\0" \
	172	"memaddrdtb=0x12000000\0" \
	173	"console=ttymxc0\0" \
	174	"baudrate=115200\0" \
	175	"boot_scr=boot.uboot\0" \
	176	"boot_vol=0\0" \
	177	"mtdids="MTDIDS_DEFAULT"\0" \
	178	"mtdparts="MTDPARTS_DEFAULT"\0" \
	179	"mmcfs=ext2\0" \
	180	"mmcrootpart=1\0" \
	181	\
	182	"setnfspath=env set nfspath /home/nfs/$user/$project/root\0" \
	183	"settftpfilelinux=env set tftpfilelinux $user/$project/$uimage\0" \
	184	"settftpfiledtb=env set tftpfiledtb $user/$project/$dtb\0" \
	185	"setubifilelinux=env set ubifilelinux boot/$uimage\0" \
	186	"setubipfiledtb=env set ubifiledtb boot/$dtb\0" \
	187	"setmmcrootdev=env set mmcrootdev /dev/mmcblk0p$mmcrootpart\0" \
	188	"setmmcfilelinux=env set mmcfilelinux /boot/$uimage\0" \
	189	"setmmcfiledtb=env set mmcfiledtb /boot/$dtb\0" \
	190	\
	191	"loadtftpkernel=dhcp $memaddrlinux $tftpfilelinux\0" \
	192	"loadtftpdtb=dhcp $memaddrdtb $tftpfiledtb\0" \
	193	"loadubikernel=ubifsload $memaddrlinux $ubifilelinux\0" \
	194	"loadubidtb=ubifsload $memaddrdtb $ubifiledtb\0" \
	195	"loadmmckernel=${mmcfs}load mmc 0:$mmcrootpart $memaddrlinux " \
	196	"$mmcfilelinux\0" \
	197	"loadmmcdtb=${mmcfs}load mmc 0:$mmcrootpart $memaddrdtb " \
	198	"$mmcfiledtb\0" \
	199	\
	200	"ubipart=ubi part $ubipartition\0" \
	201	"ubimount=ubifsmount $ubirfs\0" \
	202	\
	203	"setbootargscommon=env set bootargs $bootargs " \
	204	"console=$console,$baudrate enable_wait_mode=off\0" \
	205	"setbootargsmtd=env set bootargs $bootargs $mtdparts\0" \
	206	"setbootargsdhcp=env set bootargs $bootargs ip=dhcp\0" \
	207	"setbootargsubirfs=env set bootargs $bootargs " \
	208	"ubi.mtd=$ubipartition root=$ubirfs rootfstype=ubifs\0" \
	209	"setbootargsnfsrfs=env set bootargs $bootargs root=/dev/nfs " \
	210	"nfsroot=$serverip:$nfspath,v3,tcp\0" \
	211	"setbootargsmmcrfs=env set bootargs $bootargs " \
	212	"root=$mmcrootdev rootwait rw\0" \
	213	\
214	"bootnet=run settftpfilelinux settftpfiledtb setnfspath " \
215	"setbootargscommon setbootargsmtd setbootargsdhcp " \
216	"setbootargsnfsrfs;" \
217	"run loadtftpkernel loadtftpdtb;" \
218	"bootm $memaddrlinux - $memaddrdtb\0" \
219	"bootnet_ubirfs=run settftpfilelinux settftpfiledtb;" \
220	"run setubipartition setubirfs;" \
221	"run setbootargscommon setbootargsmtd " \
222	"setbootargsubirfs;" \
223	"run loadtftpkernel loadtftpdtb;" \
224	"bootm $memaddrlinux - $memaddrdtb\0" \
225	"bootubi=run setubipartition setubirfs setubifilelinux " \
226	"setubipfiledtb;" \
227	"run setbootargscommon setbootargsmtd " \
228	"setbootargsubirfs;" \
229	"run ubipart ubimount loadubikernel loadubidtb;" \
230	"bootm $memaddrlinux - $memaddrdtb\0" \
231	"bootubi_scr=run setubipartition setubirfs;" \
232	"run ubipart ubimount;" \
233	"if ubifsload ${memaddrsrc} boot/${boot_scr}; " \
234	"then source ${memaddrsrc}; else run bootubi; fi\0" \
235	"bootmmc=run setmmcrootdev setmmcfilelinux setmmcfiledtb " \
236	"setbootargscommon setbootargsmmcrfs;" \
237	"run loadmmckernel loadmmcdtb;" \
238	"bootm $memaddrlinux - $memaddrdtb\0" \
239	\
240	"bootcmd="CONFIG_BOOTCOMMAND"\0"
241
242	#define CONFIG_COMMON_ENV_SETTINGS CONFIG_COMMON_ENV_MISC \
243	CONFIG_COMMON_ENV_UBI
244	#endif /* __PLATINUM_CONFIG_H__ */