[people/ms/u-boot.git] / include / configs / platinum.h

/*
 * Copyright (C) 2014, Barco (www.barco.com)
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __PLATINUM_CONFIG_H__
#define __PLATINUM_CONFIG_H__

/* SPL */
#define CONFIG_SPL_NAND_SUPPORT
#define CONFIG_SPL_MMC_SUPPORT

/* Location in NAND to read U-Boot from */
#define CONFIG_SYS_NAND_U_BOOT_OFFS     (14 * 1024 * 1024)

#include "imx6_spl.h"                  /* common IMX6 SPL configuration */
#include "mx6_common.h"

/*
 * Console configuration
 */

#define CONFIG_CMD_BMODE
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_I2C
#define CONFIG_CMD_MII
#define CONFIG_CMD_MTDPARTS
#define CONFIG_CMD_NAND
#define CONFIG_CMD_NAND_TRIMFFS
#define CONFIG_CMD_PING
#define CONFIG_CMD_TIME
#define CONFIG_CMD_UBI
#define CONFIG_CMD_UBIFS
#define CONFIG_CMD_USB

/*
 * Hardware configuration
 */

/* UART config */
#define CONFIG_MXC_UART
#define CONFIG_MXC_UART_BASE			UART1_BASE

/* I2C config */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
#define CONFIG_SYS_I2C_SPEED			100000

/* MMC config */
#define CONFIG_SYS_FSL_ESDHC_ADDR		0
#define CONFIG_SYS_FSL_USDHC_NUM		1

/* Ethernet config */
#define CONFIG_FEC_MXC
#define CONFIG_MII
#define IMX_FEC_BASE				ENET_BASE_ADDR

#define CONFIG_PHYLIB

/* USB config */
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_MX6
#define CONFIG_USB_STORAGE
#define CONFIG_MXC_USB_PORT			1
#define CONFIG_MXC_USB_PORTSC			(PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS			0

/* Memory config */
#define CONFIG_NR_DRAM_BANKS			1
#define PHYS_SDRAM				MMDC0_ARB_BASE_ADDR
#ifndef PHYS_SDRAM_SIZE
#define PHYS_SDRAM_SIZE				(1024 << 20)
#endif

#define CONFIG_SYS_SDRAM_BASE			PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR		IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE		IRAM_SIZE

#define CONFIG_SYS_INIT_SP_OFFSET		(CONFIG_SYS_INIT_RAM_SIZE - \
						 GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR			(CONFIG_SYS_INIT_RAM_ADDR + \
						 CONFIG_SYS_INIT_SP_OFFSET)

#define CONFIG_SYS_MALLOC_LEN			(16 * 1024 * 1024)

#ifdef CONFIG_CMD_NAND

/* NAND config */
#define CONFIG_NAND_MXS
#ifndef CONFIG_SYS_NAND_MAX_CHIPS
#define CONFIG_SYS_NAND_MAX_CHIPS		2
#endif
#define CONFIG_SYS_MAX_NAND_DEVICE		1
#define CONFIG_SYS_NAND_BASE			0x40000000
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_ONFI_DETECTION

/* DMA config, needed for GPMI/MXS NAND support */
#define CONFIG_APBH_DMA
#define CONFIG_APBH_DMA_BURST
#define CONFIG_APBH_DMA_BURST8

/* Environment in NAND */
#define CONFIG_ENV_IS_IN_NAND
#define CONFIG_ENV_OFFSET		(16 << 20)
#define CONFIG_ENV_SECT_SIZE		(128 << 10)
#define CONFIG_ENV_SIZE			CONFIG_ENV_SECT_SIZE
#define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET + (512 << 10))
#define CONFIG_ENV_SIZE_REDUND		CONFIG_ENV_SIZE

#else /* CONFIG_CMD_NAND */

/* Environment in MMC */
#define CONFIG_ENV_SIZE			(8 << 10)
#define CONFIG_ENV_IS_IN_MMC
#define CONFIG_ENV_OFFSET		(6 * 64 * 1024)
#define CONFIG_SYS_MMC_ENV_DEV		0

#endif /* CONFIG_CMD_NAND */

/*
 * U-Boot configuration
 */

/* Board startup config */
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_MISC_INIT_R

#define CONFIG_SYS_MEMTEST_START		PHYS_SDRAM
#define CONFIG_SYS_MEMTEST_END			(CONFIG_SYS_MEMTEST_START + \
						 PHYS_SDRAM_SIZE - (12 << 20))

#define CONFIG_BOOTCOMMAND			"run bootubi_scr"

/* Miscellaneous configurable options */
#define CONFIG_PREBOOT

/* Print Buffer Size */
#define CONFIG_SYS_PBSIZE			(CONFIG_SYS_CBSIZE + \
						 sizeof(CONFIG_SYS_PROMPT) + 16)

/* MTD/UBI/UBIFS config */
#define CONFIG_LZO
#define CONFIG_MTD_DEVICE
#define CONFIG_MTD_PARTITIONS
#define CONFIG_RBTREE

#if (CONFIG_SYS_NAND_MAX_CHIPS == 1)
#define MTDIDS_DEFAULT		"nand0=gpmi-nand"
#define MTDPARTS_DEFAULT	"mtdparts=gpmi-nand:14M(spl),2M(uboot)," \
				"512k(env1),512k(env2),-(ubi)"
#elif (CONFIG_SYS_NAND_MAX_CHIPS == 2)
#define MTDIDS_DEFAULT		"nand0=gpmi-nand"
#define MTDPARTS_DEFAULT	"mtdparts=gpmi-nand:14M(spl),2M(uboot)," \
				"512k(env1),512k(env2),495M(ubi0)," \
				"14M(res0),2M(res1)," \
				"512k(res2),512k(res3),-(ubi1)"
#endif

/*
 * Environment configuration
 */

#if (CONFIG_SYS_NAND_MAX_CHIPS == 1)
#define CONFIG_COMMON_ENV_UBI						\
	"setubipartition=env set ubipartition ubi\0"			\
	"setubirfs=env set ubirfs $ubipartition:rootfs$boot_vol\0"
#elif (CONFIG_SYS_NAND_MAX_CHIPS == 2)
#define CONFIG_COMMON_ENV_UBI						\
	"setubipartition=env set ubipartition ubi$boot_vol\0"		\
	"setubirfs=env set ubirfs ubi0:rootfs\0"
#endif

#define CONFIG_COMMON_ENV_MISC						\
	"user=user\0"							\
	"project="CONFIG_PLATINUM_PROJECT"\0"				\
	"uimage=uImage\0"						\
	"dtb="CONFIG_PLATINUM_CPU"-platinum-"CONFIG_PLATINUM_PROJECT".dtb\0" \
	"serverip=serverip\0"						\
	"memaddrlinux=0x10800000\0"					\
	"memaddrsrc=0x11000000\0"					\
	"memaddrdtb=0x12000000\0"					\
	"console=ttymxc0\0"						\
	"baudrate=115200\0"						\
	"boot_scr=boot.uboot\0"						\
	"boot_vol=0\0"							\
	"mtdids="MTDIDS_DEFAULT"\0"					\
	"mtdparts="MTDPARTS_DEFAULT"\0"					\
	"mmcfs=ext2\0"							\
	"mmcrootpart=1\0"						\
	\
	"setnfspath=env set nfspath /home/nfs/$user/$project/root\0"	\
	"settftpfilelinux=env set tftpfilelinux $user/$project/$uimage\0" \
	"settftpfiledtb=env set tftpfiledtb $user/$project/$dtb\0"	\
	"setubifilelinux=env set ubifilelinux boot/$uimage\0"		\
	"setubipfiledtb=env set ubifiledtb boot/$dtb\0"			\
	"setmmcrootdev=env set mmcrootdev /dev/mmcblk0p$mmcrootpart\0"	\
	"setmmcfilelinux=env set mmcfilelinux /boot/$uimage\0"		\
	"setmmcfiledtb=env set mmcfiledtb /boot/$dtb\0"			\
	\
	"loadtftpkernel=dhcp $memaddrlinux $tftpfilelinux\0"		\
	"loadtftpdtb=dhcp $memaddrdtb $tftpfiledtb\0"			\
	"loadubikernel=ubifsload $memaddrlinux $ubifilelinux\0"		\
	"loadubidtb=ubifsload $memaddrdtb $ubifiledtb\0"		\
	"loadmmckernel=${mmcfs}load mmc 0:$mmcrootpart $memaddrlinux "	\
		"$mmcfilelinux\0"					\
	"loadmmcdtb=${mmcfs}load mmc 0:$mmcrootpart $memaddrdtb "	\
		"$mmcfiledtb\0"						\
	\
	"ubipart=ubi part $ubipartition\0"				\
	"ubimount=ubifsmount $ubirfs\0"					\
	\
	"setbootargscommon=env set bootargs $bootargs "			\
		"console=$console,$baudrate enable_wait_mode=off\0"	\
	"setbootargsmtd=env set bootargs $bootargs $mtdparts\0"		\
	"setbootargsdhcp=env set bootargs $bootargs ip=dhcp\0"		\
	"setbootargsubirfs=env set bootargs $bootargs "			\
		"ubi.mtd=$ubipartition root=$ubirfs rootfstype=ubifs\0" \
	"setbootargsnfsrfs=env set bootargs $bootargs root=/dev/nfs "	\
		"nfsroot=$serverip:$nfspath,v3,tcp\0"			\
	"setbootargsmmcrfs=env set bootargs $bootargs "			\
		"root=$mmcrootdev rootwait rw\0"			\
	\
	"bootnet=run settftpfilelinux settftpfiledtb setnfspath "	\
		"setbootargscommon setbootargsmtd setbootargsdhcp "	\
			"setbootargsnfsrfs;"				\
			"run loadtftpkernel loadtftpdtb;"		\
			"bootm $memaddrlinux - $memaddrdtb\0"		\
	"bootnet_ubirfs=run settftpfilelinux settftpfiledtb;"		\
			"run setubipartition setubirfs;"		\
			"run setbootargscommon setbootargsmtd "		\
				"setbootargsubirfs;"			\
			"run loadtftpkernel loadtftpdtb;"		\
			"bootm $memaddrlinux - $memaddrdtb\0"		\
	"bootubi=run setubipartition setubirfs setubifilelinux "	\
				"setubipfiledtb;"			\
			"run setbootargscommon setbootargsmtd "		\
				"setbootargsubirfs;"			\
			"run ubipart ubimount loadubikernel loadubidtb;" \
			"bootm $memaddrlinux - $memaddrdtb\0"		\
	"bootubi_scr=run setubipartition setubirfs;"			\
			"run ubipart ubimount;"				\
			"if ubifsload ${memaddrsrc} boot/${boot_scr}; "	\
			"then source ${memaddrsrc}; else run bootubi; fi\0" \
	"bootmmc=run setmmcrootdev setmmcfilelinux setmmcfiledtb "	\
			"setbootargscommon setbootargsmmcrfs;"		\
			"run loadmmckernel loadmmcdtb;"			\
			"bootm $memaddrlinux - $memaddrdtb\0"		\
	\
	"bootcmd="CONFIG_BOOTCOMMAND"\0"

#define CONFIG_COMMON_ENV_SETTINGS			CONFIG_COMMON_ENV_MISC \
							CONFIG_COMMON_ENV_UBI
#endif /* __PLATINUM_CONFIG_H__ */
Commit	Line	Data
5d6050fd SR	1	/*
	2	* Copyright (C) 2014, Barco (www.barco.com)
	3	*
	4	* SPDX-License-Identifier: GPL-2.0+
	5	*/
	6
	7	#ifndef __PLATINUM_CONFIG_H__
	8	#define __PLATINUM_CONFIG_H__
	9
5d6050fd SR	10	/* SPL */
	11	#define CONFIG_SPL_NAND_SUPPORT
	12	#define CONFIG_SPL_MMC_SUPPORT
	13
	14	/* Location in NAND to read U-Boot from */
	15	#define CONFIG_SYS_NAND_U_BOOT_OFFS (14 * 1024 * 1024)
	16
	17	#include "imx6_spl.h" /* common IMX6 SPL configuration */
	18	#include "mx6_common.h"
5d6050fd SR	19
	20	/*
	21	* Console configuration
	22	*/
	23
5d6050fd SR	24	#define CONFIG_CMD_BMODE
5d6050fd SR	25	#define CONFIG_CMD_DHCP
5d6050fd	26	#define CONFIG_CMD_I2C
5d6050fd	27	#define CONFIG_CMD_MII
5d6050fd SR	28	#define CONFIG_CMD_MTDPARTS
	29	#define CONFIG_CMD_NAND
	30	#define CONFIG_CMD_NAND_TRIMFFS
5d6050fd SR	31	#define CONFIG_CMD_PING
	32	#define CONFIG_CMD_TIME
	33	#define CONFIG_CMD_UBI
	34	#define CONFIG_CMD_UBIFS
	35	#define CONFIG_CMD_USB
	36
	37	/*
	38	* Hardware configuration
	39	*/
	40
5d6050fd SR	41	/* UART config */
	42	#define CONFIG_MXC_UART
	43	#define CONFIG_MXC_UART_BASE UART1_BASE
5d6050fd SR	44
	45	/* I2C config */
	46	#define CONFIG_SYS_I2C
	47	#define CONFIG_SYS_I2C_MXC
f8cb101e	48	#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
5d6050fd SR	49	#define CONFIG_SYS_I2C_SPEED 100000
	50
	51	/* MMC config */
5d6050fd SR	52	#define CONFIG_SYS_FSL_ESDHC_ADDR 0
5d6050fd SR	53	#define CONFIG_SYS_FSL_USDHC_NUM 1
5d6050fd SR	54
	55	/* Ethernet config */
	56	#define CONFIG_FEC_MXC
	57	#define CONFIG_MII
	58	#define IMX_FEC_BASE ENET_BASE_ADDR
	59
	60	#define CONFIG_PHYLIB
	61
	62	/* USB config */
	63	#define CONFIG_USB_EHCI
	64	#define CONFIG_USB_EHCI_MX6
	65	#define CONFIG_USB_STORAGE
	66	#define CONFIG_MXC_USB_PORT 1
	67	#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI \| PORT_PTS_PTW)
	68	#define CONFIG_MXC_USB_FLAGS 0
	69
	70	/* Memory config */
	71	#define CONFIG_NR_DRAM_BANKS 1
	72	#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
	73	#ifndef PHYS_SDRAM_SIZE
	74	#define PHYS_SDRAM_SIZE (1024 << 20)
	75	#endif
	76
	77	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
	78	#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
	79	#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
	80
	81	#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \
	82	GENERATED_GBL_DATA_SIZE)
	83	#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
	84	CONFIG_SYS_INIT_SP_OFFSET)
	85
	86	#define CONFIG_SYS_MALLOC_LEN (16 * 1024 * 1024)
	87
5d6050fd SR	88	#ifdef CONFIG_CMD_NAND
	89
	90	/* NAND config */
	91	#define CONFIG_NAND_MXS
	92	#ifndef CONFIG_SYS_NAND_MAX_CHIPS
	93	#define CONFIG_SYS_NAND_MAX_CHIPS 2
	94	#endif
	95	#define CONFIG_SYS_MAX_NAND_DEVICE 1
	96	#define CONFIG_SYS_NAND_BASE 0x40000000
	97	#define CONFIG_SYS_NAND_5_ADDR_CYCLE
	98	#define CONFIG_SYS_NAND_ONFI_DETECTION
	99
	100	/* DMA config, needed for GPMI/MXS NAND support */
	101	#define CONFIG_APBH_DMA
	102	#define CONFIG_APBH_DMA_BURST
	103	#define CONFIG_APBH_DMA_BURST8
	104
5d6050fd SR	105	/* Environment in NAND */
	106	#define CONFIG_ENV_IS_IN_NAND
	107	#define CONFIG_ENV_OFFSET (16 << 20)
	108	#define CONFIG_ENV_SECT_SIZE (128 << 10)
	109	#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
	110	#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + (512 << 10))
	111	#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
	112
	113	#else /* CONFIG_CMD_NAND */
	114
	115	/* Environment in MMC */
	116	#define CONFIG_ENV_SIZE (8 << 10)
	117	#define CONFIG_ENV_IS_IN_MMC
	118	#define CONFIG_ENV_OFFSET (6 * 64 * 1024)
	119	#define CONFIG_SYS_MMC_ENV_DEV 0
	120
	121	#endif /* CONFIG_CMD_NAND */
	122
	123	/*
	124	* U-Boot configuration
	125	*/
	126
5d6050fd SR	127	/* Board startup config */
	128	#define CONFIG_BOARD_EARLY_INIT_F
	129	#define CONFIG_MISC_INIT_R
	130
5d6050fd SR	131	#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
	132	#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + \
	133	PHYS_SDRAM_SIZE - (12 << 20))
	134
5d6050fd SR	135	#define CONFIG_BOOTCOMMAND "run bootubi_scr"
	136
	137	/* Miscellaneous configurable options */
5d6050fd SR	138	#define CONFIG_PREBOOT
5d6050fd SR	139
5d6050fd SR	140	/* Print Buffer Size */
	141	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
	142	sizeof(CONFIG_SYS_PROMPT) + 16)
5d6050fd	143
5d6050fd SR	144	/* MTD/UBI/UBIFS config */
	145	#define CONFIG_LZO
	146	#define CONFIG_MTD_DEVICE
	147	#define CONFIG_MTD_PARTITIONS
	148	#define CONFIG_RBTREE
	149
	150	#if (CONFIG_SYS_NAND_MAX_CHIPS == 1)
	151	#define MTDIDS_DEFAULT "nand0=gpmi-nand"
	152	#define MTDPARTS_DEFAULT "mtdparts=gpmi-nand:14M(spl),2M(uboot)," \
	153	"512k(env1),512k(env2),-(ubi)"
	154	#elif (CONFIG_SYS_NAND_MAX_CHIPS == 2)
	155	#define MTDIDS_DEFAULT "nand0=gpmi-nand"
	156	#define MTDPARTS_DEFAULT "mtdparts=gpmi-nand:14M(spl),2M(uboot)," \
	157	"512k(env1),512k(env2),495M(ubi0)," \
	158	"14M(res0),2M(res1)," \
	159	"512k(res2),512k(res3),-(ubi1)"
	160	#endif
	161
5d6050fd SR	162	/*
	163	* Environment configuration
	164	*/
	165
	166	#if (CONFIG_SYS_NAND_MAX_CHIPS == 1)
	167	#define CONFIG_COMMON_ENV_UBI \
	168	"setubipartition=env set ubipartition ubi\0" \
	169	"setubirfs=env set ubirfs $ubipartition:rootfs$boot_vol\0"
	170	#elif (CONFIG_SYS_NAND_MAX_CHIPS == 2)
	171	#define CONFIG_COMMON_ENV_UBI \
	172	"setubipartition=env set ubipartition ubi$boot_vol\0" \
	173	"setubirfs=env set ubirfs ubi0:rootfs\0"
	174	#endif
	175
	176	#define CONFIG_COMMON_ENV_MISC \
	177	"user=user\0" \
	178	"project="CONFIG_PLATINUM_PROJECT"\0" \
	179	"uimage=uImage\0" \
	180	"dtb="CONFIG_PLATINUM_CPU"-platinum-"CONFIG_PLATINUM_PROJECT".dtb\0" \
	181	"serverip=serverip\0" \
	182	"memaddrlinux=0x10800000\0" \
	183	"memaddrsrc=0x11000000\0" \
	184	"memaddrdtb=0x12000000\0" \
	185	"console=ttymxc0\0" \
	186	"baudrate=115200\0" \
	187	"boot_scr=boot.uboot\0" \
	188	"boot_vol=0\0" \
	189	"mtdids="MTDIDS_DEFAULT"\0" \
	190	"mtdparts="MTDPARTS_DEFAULT"\0" \
	191	"mmcfs=ext2\0" \
	192	"mmcrootpart=1\0" \
	193	\
	194	"setnfspath=env set nfspath /home/nfs/$user/$project/root\0" \
	195	"settftpfilelinux=env set tftpfilelinux $user/$project/$uimage\0" \
	196	"settftpfiledtb=env set tftpfiledtb $user/$project/$dtb\0" \
	197	"setubifilelinux=env set ubifilelinux boot/$uimage\0" \
	198	"setubipfiledtb=env set ubifiledtb boot/$dtb\0" \
	199	"setmmcrootdev=env set mmcrootdev /dev/mmcblk0p$mmcrootpart\0" \
	200	"setmmcfilelinux=env set mmcfilelinux /boot/$uimage\0" \
	201	"setmmcfiledtb=env set mmcfiledtb /boot/$dtb\0" \
	202	\
	203	"loadtftpkernel=dhcp $memaddrlinux $tftpfilelinux\0" \
	204	"loadtftpdtb=dhcp $memaddrdtb $tftpfiledtb\0" \
	205	"loadubikernel=ubifsload $memaddrlinux $ubifilelinux\0" \
	206	"loadubidtb=ubifsload $memaddrdtb $ubifiledtb\0" \
	207	"loadmmckernel=${mmcfs}load mmc 0:$mmcrootpart $memaddrlinux " \
	208	"$mmcfilelinux\0" \
	209	"loadmmcdtb=${mmcfs}load mmc 0:$mmcrootpart $memaddrdtb " \
	210	"$mmcfiledtb\0" \
	211	\
	212	"ubipart=ubi part $ubipartition\0" \
	213	"ubimount=ubifsmount $ubirfs\0" \
	214	\
	215	"setbootargscommon=env set bootargs $bootargs " \
	216	"console=$console,$baudrate enable_wait_mode=off\0" \
	217	"setbootargsmtd=env set bootargs $bootargs $mtdparts\0" \
	218	"setbootargsdhcp=env set bootargs $bootargs ip=dhcp\0" \
	219	"setbootargsubirfs=env set bootargs $bootargs " \
	220	"ubi.mtd=$ubipartition root=$ubirfs rootfstype=ubifs\0" \
	221	"setbootargsnfsrfs=env set bootargs $bootargs root=/dev/nfs " \
	222	"nfsroot=$serverip:$nfspath,v3,tcp\0" \
	223	"setbootargsmmcrfs=env set bootargs $bootargs " \
	224	"root=$mmcrootdev rootwait rw\0" \
	225	\
226	"bootnet=run settftpfilelinux settftpfiledtb setnfspath " \
227	"setbootargscommon setbootargsmtd setbootargsdhcp " \
228	"setbootargsnfsrfs;" \
229	"run loadtftpkernel loadtftpdtb;" \
230	"bootm $memaddrlinux - $memaddrdtb\0" \
231	"bootnet_ubirfs=run settftpfilelinux settftpfiledtb;" \
232	"run setubipartition setubirfs;" \
233	"run setbootargscommon setbootargsmtd " \
234	"setbootargsubirfs;" \
235	"run loadtftpkernel loadtftpdtb;" \
236	"bootm $memaddrlinux - $memaddrdtb\0" \
237	"bootubi=run setubipartition setubirfs setubifilelinux " \
238	"setubipfiledtb;" \
239	"run setbootargscommon setbootargsmtd " \
240	"setbootargsubirfs;" \
241	"run ubipart ubimount loadubikernel loadubidtb;" \
242	"bootm $memaddrlinux - $memaddrdtb\0" \
243	"bootubi_scr=run setubipartition setubirfs;" \
244	"run ubipart ubimount;" \
245	"if ubifsload ${memaddrsrc} boot/${boot_scr}; " \
246	"then source ${memaddrsrc}; else run bootubi; fi\0" \
247	"bootmmc=run setmmcrootdev setmmcfilelinux setmmcfiledtb " \
248	"setbootargscommon setbootargsmmcrfs;" \
249	"run loadmmckernel loadmmcdtb;" \
250	"bootm $memaddrlinux - $memaddrdtb\0" \
251	\
252	"bootcmd="CONFIG_BOOTCOMMAND"\0"
253
254	#define CONFIG_COMMON_ENV_SETTINGS CONFIG_COMMON_ENV_MISC \
255	CONFIG_COMMON_ENV_UBI
256	#endif /* __PLATINUM_CONFIG_H__ */