[thirdparty/u-boot.git] / include / configs / pm9261.h

/* SPDX-License-Identifier: GPL-2.0+ */
/*
 * (C) Copyright 2007-2008
 * Stelian Pop <stelian@popies.net>
 * Lead Tech Design <www.leadtechdesign.com>
 * Ilko Iliev <www.ronetix.at>
 *
 * Configuation settings for the RONETIX PM9261 board.
 */

#ifndef __CONFIG_H
#define __CONFIG_H

/*
 * SoC must be defined first, before hardware.h is included.
 * In this case SoC is defined in boards.cfg.
 */

#include <asm/hardware.h>
/* ARM asynchronous clock */

#define MASTER_PLL_DIV		15
#define MASTER_PLL_MUL		162
#define MAIN_PLL_DIV		2
#define CONFIG_SYS_AT91_SLOW_CLOCK	32768		/* slow clock xtal */
#define CONFIG_SYS_AT91_MAIN_CLOCK	18432000

#define CONFIG_SYS_AT91_CPU_NAME	"AT91SAM9261"

#define CONFIG_MACH_TYPE	MACH_TYPE_PM9261

/* clocks */
/* CKGR_MOR - enable main osc. */
#define CONFIG_SYS_MOR_VAL						\
		(AT91_PMC_MOR_MOSCEN |					\
		 (255 << 8))		/* Main Oscillator Start-up Time */
#define CONFIG_SYS_PLLAR_VAL						\
		(AT91_PMC_PLLAR_29 | /* Bit 29 must be 1 when prog */ \
		 AT91_PMC_PLLXR_OUT(3) |						\
		 ((MASTER_PLL_MUL - 1) << 16) | (MASTER_PLL_DIV))

/* PCK/2 = MCK Master Clock from PLLA */
#define	CONFIG_SYS_MCKR1_VAL		\
		(AT91_PMC_MCKR_CSS_SLOW |	\
		 AT91_PMC_MCKR_PRES_1 |	\
		 AT91_PMC_MCKR_MDIV_2)

/* PCK/2 = MCK Master Clock from PLLA */
#define	CONFIG_SYS_MCKR2_VAL		\
		(AT91_PMC_MCKR_CSS_PLLA |	\
		 AT91_PMC_MCKR_PRES_1 |	\
		 AT91_PMC_MCKR_MDIV_2)

/* define PDC[31:16] as DATA[31:16] */
#define CONFIG_SYS_PIOC_PDR_VAL1	0xFFFF0000
/* no pull-up for D[31:16] */
#define CONFIG_SYS_PIOC_PPUDR_VAL	0xFFFF0000

/* EBI_CSA, no pull-ups for D[15:0], CS1 SDRAM, CS3 NAND Flash */
#define CONFIG_SYS_MATRIX_EBICSA_VAL		\
	(AT91_MATRIX_CSA_DBPUC | AT91_MATRIX_CSA_EBI_CS1A)

/* SDRAM */
/* SDRAMC_MR Mode register */
#define CONFIG_SYS_SDRC_MR_VAL1		AT91_SDRAMC_MODE_NORMAL
/* SDRAMC_TR - Refresh Timer register */
#define CONFIG_SYS_SDRC_TR_VAL1		0x13C
/* SDRAMC_CR - Configuration register*/
#define CONFIG_SYS_SDRC_CR_VAL							\
		(AT91_SDRAMC_NC_9 |						\
		 AT91_SDRAMC_NR_13 |						\
		 AT91_SDRAMC_NB_4 |						\
		 AT91_SDRAMC_CAS_3 |						\
		 AT91_SDRAMC_DBW_32 |						\
		 (1 <<  8) |		/* Write Recovery Delay */		\
		 (7 << 12) |		/* Row Cycle Delay */			\
		 (3 << 16) |		/* Row Precharge Delay */		\
		 (2 << 20) |		/* Row to Column Delay */		\
		 (5 << 24) |		/* Active to Precharge Delay */		\
		 (1 << 28))		/* Exit Self Refresh to Active Delay */

/* Memory Device Register -> SDRAM */
#define CONFIG_SYS_SDRC_MDR_VAL		AT91_SDRAMC_MD_SDRAM
#define CONFIG_SYS_SDRC_MR_VAL2		AT91_SDRAMC_MODE_PRECHARGE
#define CONFIG_SYS_SDRAM_VAL1		0		/* SDRAM_BASE */
#define CONFIG_SYS_SDRC_MR_VAL3		AT91_SDRAMC_MODE_REFRESH
#define CONFIG_SYS_SDRAM_VAL2		0		/* SDRAM_BASE */
#define CONFIG_SYS_SDRAM_VAL3		0		/* SDRAM_BASE */
#define CONFIG_SYS_SDRAM_VAL4		0		/* SDRAM_BASE */
#define CONFIG_SYS_SDRAM_VAL5		0		/* SDRAM_BASE */
#define CONFIG_SYS_SDRAM_VAL6		0		/* SDRAM_BASE */
#define CONFIG_SYS_SDRAM_VAL7		0		/* SDRAM_BASE */
#define CONFIG_SYS_SDRAM_VAL8		0		/* SDRAM_BASE */
#define CONFIG_SYS_SDRAM_VAL9		0		/* SDRAM_BASE */
#define CONFIG_SYS_SDRC_MR_VAL4		AT91_SDRAMC_MODE_LMR
#define CONFIG_SYS_SDRAM_VAL10		0		/* SDRAM_BASE */
#define CONFIG_SYS_SDRC_MR_VAL5		AT91_SDRAMC_MODE_NORMAL
#define CONFIG_SYS_SDRAM_VAL11		0		/* SDRAM_BASE */
#define CONFIG_SYS_SDRC_TR_VAL2		1200		/* SDRAM_TR */
#define CONFIG_SYS_SDRAM_VAL12		0		/* SDRAM_BASE */

/* setup SMC0, CS0 (NOR Flash) - 16-bit, 15 WS */
#define CONFIG_SYS_SMC0_SETUP0_VAL					\
		(AT91_SMC_SETUP_NWE(10) | AT91_SMC_SETUP_NCS_WR(10) |	\
		 AT91_SMC_SETUP_NRD(10) | AT91_SMC_SETUP_NCS_RD(10))
#define CONFIG_SYS_SMC0_PULSE0_VAL					\
		(AT91_SMC_PULSE_NWE(11) | AT91_SMC_PULSE_NCS_WR(11) |	\
		 AT91_SMC_PULSE_NRD(11) | AT91_SMC_PULSE_NCS_RD(11))
#define CONFIG_SYS_SMC0_CYCLE0_VAL	\
		(AT91_SMC_CYCLE_NWE(22) | AT91_SMC_CYCLE_NRD(22))
#define CONFIG_SYS_SMC0_MODE0_VAL				\
		(AT91_SMC_MODE_RM_NRD | AT91_SMC_MODE_WM_NWE |	\
		 AT91_SMC_MODE_DBW_16 |				\
		 AT91_SMC_MODE_TDF |				\
		 AT91_SMC_MODE_TDF_CYCLE(6))

/* user reset enable */
#define CONFIG_SYS_RSTC_RMR_VAL			\
		(AT91_RSTC_KEY |		\
		AT91_RSTC_CR_PROCRST |		\
		AT91_RSTC_MR_ERSTL(1) |	\
		AT91_RSTC_MR_ERSTL(2))

/* Disable Watchdog */
#define CONFIG_SYS_WDTC_WDMR_VAL				\
		(AT91_WDT_MR_WDIDLEHLT | AT91_WDT_MR_WDDBGHLT |	\
		 AT91_WDT_MR_WDV(0xfff) |					\
		 AT91_WDT_MR_WDDIS |				\
		 AT91_WDT_MR_WDD(0xfff))

#define CONFIG_CMDLINE_TAG	1	/* enable passing of ATAGs */
#define CONFIG_SETUP_MEMORY_TAGS 1
#define CONFIG_INITRD_TAG	1

#undef CONFIG_SKIP_LOWLEVEL_INIT

/*
 * Hardware drivers
 */

/* LCD */
#define LCD_BPP				LCD_COLOR8
#define CONFIG_LCD_LOGO			1
#undef LCD_TEST_PATTERN
#define CONFIG_LCD_INFO			1
#define CONFIG_LCD_INFO_BELOW_LOGO	1
#define CONFIG_ATMEL_LCD		1
#define CONFIG_ATMEL_LCD_BGR555		1

/*
 * BOOTP options
 */
#define CONFIG_BOOTP_BOOTFILESIZE	1

/* SDRAM */
#define PHYS_SDRAM				0x20000000
#define PHYS_SDRAM_SIZE				0x04000000	/* 64 megs */

/* NAND flash */
#define CONFIG_SYS_MAX_NAND_DEVICE		1
#define CONFIG_SYS_NAND_BASE			0x40000000
#define CONFIG_SYS_NAND_DBW_8			1
/* our ALE is AD22 */
#define CONFIG_SYS_NAND_MASK_ALE		(1 << 22)
/* our CLE is AD21 */
#define CONFIG_SYS_NAND_MASK_CLE		(1 << 21)
#define CONFIG_SYS_NAND_ENABLE_PIN		GPIO_PIN_PC(14)
#define CONFIG_SYS_NAND_READY_PIN		GPIO_PIN_PA(16)

/* NOR flash */
#define PHYS_FLASH_1				0x10000000
#define CONFIG_SYS_FLASH_BASE			PHYS_FLASH_1
#define CONFIG_SYS_MAX_FLASH_SECT		256
#define CONFIG_SYS_MAX_FLASH_BANKS		1

/* Ethernet */
#define CONFIG_DRIVER_DM9000			1
#define CONFIG_DM9000_BASE			0x30000000
#define DM9000_IO				CONFIG_DM9000_BASE
#define DM9000_DATA				(CONFIG_DM9000_BASE + 4)
#define CONFIG_DM9000_USE_16BIT			1
#define CONFIG_NET_RETRY_COUNT			20
#define CONFIG_RESET_PHY_R			1

/* USB */
#define CONFIG_USB_ATMEL
#define CONFIG_USB_ATMEL_CLK_SEL_PLLB
#define CONFIG_USB_OHCI_NEW			1
#define CONFIG_SYS_USB_OHCI_CPU_INIT		1
#define CONFIG_SYS_USB_OHCI_REGS_BASE		0x00500000
#define CONFIG_SYS_USB_OHCI_SLOT_NAME		"at91sam9261"
#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	2

#define CONFIG_SYS_LOAD_ADDR			0x22000000

#undef CONFIG_SYS_USE_DATAFLASH_CS0
#undef CONFIG_SYS_USE_NANDFLASH
#define CONFIG_SYS_USE_FLASH	1

#ifdef CONFIG_SYS_USE_DATAFLASH_CS0

/* bootstrap + u-boot + env + linux in dataflash on CS0 */
#define CONFIG_BOOTCOMMAND	"sf probe 0; " \
				"sf read 0x22000000 0x84000 0x210000; " \
				"bootm 0x22000000"

#elif defined(CONFIG_SYS_USE_NANDFLASH) /* CONFIG_SYS_USE_NANDFLASH */

/* bootstrap + u-boot + env + linux in nandflash */
#define CONFIG_BOOTCOMMAND	"nand read 0x22000000 0xA0000 0x200000; bootm"

#elif defined (CONFIG_SYS_USE_FLASH)

#define CONFIG_ENV_OVERWRITE	1

/* JFFS Partition offset set */
#define CONFIG_SYS_JFFS2_FIRST_BANK	0
#define CONFIG_SYS_JFFS2_NUM_BANKS	1

/* 512k reserved for u-boot */
#define CONFIG_SYS_JFFS2_FIRST_SECTOR	11

#define CONFIG_BOOTCOMMAND	"run flashboot"

#define CONFIG_CON_ROT "fbcon=rotate:3 "

#define CONFIG_EXTRA_ENV_SETTINGS				\
	"mtdids=" CONFIG_MTDIDS_DEFAULT "\0"				\
	"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0"			\
	"partition=nand0,0\0"					\
	"ramargs=setenv bootargs $(bootargs) $(mtdparts)\0"	\
	"nfsargs=setenv bootargs root=/dev/nfs rw "		\
		CONFIG_CON_ROT					\
		"nfsroot=$(serverip):$(rootpath) $(mtdparts)\0"	\
	"addip=setenv bootargs $(bootargs) "			\
		"ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)"\
		":$(hostname):eth0:off\0"			\
	"ramboot=tftpboot 0x22000000 vmImage;"			\
		"run ramargs;run addip;bootm 22000000\0"	\
	"nfsboot=tftpboot 0x22000000 vmImage;"			\
		"run nfsargs;run addip;bootm 22000000\0"	\
	"flashboot=run ramargs;run addip;bootm 0x10050000\0"	\
	""
#else
#error "Undefined memory device"
#endif

/*
 * Size of malloc() pool
 */
#define CONFIG_SYS_MALLOC_LEN		\
		ROUND(3 * CONFIG_ENV_SIZE + 128 * 1024, 0x1000)

#define CONFIG_SYS_SDRAM_BASE	PHYS_SDRAM
#define CONFIG_SYS_INIT_SP_ADDR	(CONFIG_SYS_SDRAM_BASE + 16 * 1024 - \
				GENERATED_GBL_DATA_SIZE)

#endif
Commit	Line	Data
83d290c5	1	/* SPDX-License-Identifier: GPL-2.0+ */
32949232 II	2	/*
32949232 II	3	* (C) Copyright 2007-2008
c9e798d3	4	* Stelian Pop <stelian@popies.net>
32949232 II	5	* Lead Tech Design <www.leadtechdesign.com>
	6	* Ilko Iliev <www.ronetix.at>
	7	*
	8	* Configuation settings for the RONETIX PM9261 board.
32949232 II	9	*/
	10
	11	#ifndef __CONFIG_H
	12	#define __CONFIG_H
	13
f47316a8 AD	14	/*
	15	* SoC must be defined first, before hardware.h is included.
	16	* In this case SoC is defined in boards.cfg.
	17	*/
	18
	19	#include <asm/hardware.h>
32949232	20	/* ARM asynchronous clock */
32949232	21
32949232 II	22	#define MASTER_PLL_DIV 15
	23	#define MASTER_PLL_MUL 162
	24	#define MAIN_PLL_DIV 2
f47316a8	25	#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */
7c966a8b	26	#define CONFIG_SYS_AT91_MAIN_CLOCK 18432000
32949232	27
f47316a8	28	#define CONFIG_SYS_AT91_CPU_NAME "AT91SAM9261"
32949232	29
a3e09cc2 AD	30	#define CONFIG_MACH_TYPE MACH_TYPE_PM9261
a3e09cc2 AD	31
32949232 II	32	/* clocks */
	33	/* CKGR_MOR - enable main osc. */
	34	#define CONFIG_SYS_MOR_VAL \
e3150c77	35	(AT91_PMC_MOR_MOSCEN \| \
32949232 II	36	(255 << 8)) /* Main Oscillator Start-up Time */
32949232 II	37	#define CONFIG_SYS_PLLAR_VAL \
e3150c77 AD	38	(AT91_PMC_PLLAR_29 \| /* Bit 29 must be 1 when prog */ \
e3150c77 AD	39	AT91_PMC_PLLXR_OUT(3) \| \
32949232 II	40	((MASTER_PLL_MUL - 1) << 16) \| (MASTER_PLL_DIV))
	41
	42	/* PCK/2 = MCK Master Clock from PLLA */
	43	#define CONFIG_SYS_MCKR1_VAL \
e3150c77 AD	44	(AT91_PMC_MCKR_CSS_SLOW \| \
e3150c77 AD	45	AT91_PMC_MCKR_PRES_1 \| \
7ac2e7c1	46	AT91_PMC_MCKR_MDIV_2)
32949232 II	47
	48	/* PCK/2 = MCK Master Clock from PLLA */
	49	#define CONFIG_SYS_MCKR2_VAL \
e3150c77 AD	50	(AT91_PMC_MCKR_CSS_PLLA \| \
e3150c77 AD	51	AT91_PMC_MCKR_PRES_1 \| \
7ac2e7c1	52	AT91_PMC_MCKR_MDIV_2)
32949232 II	53
	54	/* define PDC[31:16] as DATA[31:16] */
	55	#define CONFIG_SYS_PIOC_PDR_VAL1 0xFFFF0000
	56	/* no pull-up for D[31:16] */
	57	#define CONFIG_SYS_PIOC_PPUDR_VAL 0xFFFF0000
	58
	59	/* EBI_CSA, no pull-ups for D[15:0], CS1 SDRAM, CS3 NAND Flash */
	60	#define CONFIG_SYS_MATRIX_EBICSA_VAL \
e3150c77	61	(AT91_MATRIX_CSA_DBPUC \| AT91_MATRIX_CSA_EBI_CS1A)
32949232 II	62
	63	/* SDRAM */
	64	/* SDRAMC_MR Mode register */
	65	#define CONFIG_SYS_SDRC_MR_VAL1 AT91_SDRAMC_MODE_NORMAL
	66	/* SDRAMC_TR - Refresh Timer register */
	67	#define CONFIG_SYS_SDRC_TR_VAL1 0x13C
	68	/* SDRAMC_CR - Configuration register*/
	69	#define CONFIG_SYS_SDRC_CR_VAL \
	70	(AT91_SDRAMC_NC_9 \| \
	71	AT91_SDRAMC_NR_13 \| \
	72	AT91_SDRAMC_NB_4 \| \
	73	AT91_SDRAMC_CAS_3 \| \
	74	AT91_SDRAMC_DBW_32 \| \
	75	(1 << 8) \| /* Write Recovery Delay */ \
	76	(7 << 12) \| /* Row Cycle Delay */ \
	77	(3 << 16) \| /* Row Precharge Delay */ \
	78	(2 << 20) \| /* Row to Column Delay */ \
	79	(5 << 24) \| /* Active to Precharge Delay */ \
	80	(1 << 28)) /* Exit Self Refresh to Active Delay */
	81
	82	/* Memory Device Register -> SDRAM */
	83	#define CONFIG_SYS_SDRC_MDR_VAL AT91_SDRAMC_MD_SDRAM
	84	#define CONFIG_SYS_SDRC_MR_VAL2 AT91_SDRAMC_MODE_PRECHARGE
	85	#define CONFIG_SYS_SDRAM_VAL1 0 /* SDRAM_BASE */
	86	#define CONFIG_SYS_SDRC_MR_VAL3 AT91_SDRAMC_MODE_REFRESH
	87	#define CONFIG_SYS_SDRAM_VAL2 0 /* SDRAM_BASE */
	88	#define CONFIG_SYS_SDRAM_VAL3 0 /* SDRAM_BASE */
	89	#define CONFIG_SYS_SDRAM_VAL4 0 /* SDRAM_BASE */
	90	#define CONFIG_SYS_SDRAM_VAL5 0 /* SDRAM_BASE */
	91	#define CONFIG_SYS_SDRAM_VAL6 0 /* SDRAM_BASE */
	92	#define CONFIG_SYS_SDRAM_VAL7 0 /* SDRAM_BASE */
	93	#define CONFIG_SYS_SDRAM_VAL8 0 /* SDRAM_BASE */
	94	#define CONFIG_SYS_SDRAM_VAL9 0 /* SDRAM_BASE */
	95	#define CONFIG_SYS_SDRC_MR_VAL4 AT91_SDRAMC_MODE_LMR
	96	#define CONFIG_SYS_SDRAM_VAL10 0 /* SDRAM_BASE */
	97	#define CONFIG_SYS_SDRC_MR_VAL5 AT91_SDRAMC_MODE_NORMAL
	98	#define CONFIG_SYS_SDRAM_VAL11 0 /* SDRAM_BASE */
	99	#define CONFIG_SYS_SDRC_TR_VAL2 1200 /* SDRAM_TR */
	100	#define CONFIG_SYS_SDRAM_VAL12 0 /* SDRAM_BASE */
	101
	102	/* setup SMC0, CS0 (NOR Flash) - 16-bit, 15 WS */
	103	#define CONFIG_SYS_SMC0_SETUP0_VAL \
e3150c77 AD	104	(AT91_SMC_SETUP_NWE(10) \| AT91_SMC_SETUP_NCS_WR(10) \| \
e3150c77 AD	105	AT91_SMC_SETUP_NRD(10) \| AT91_SMC_SETUP_NCS_RD(10))
32949232	106	#define CONFIG_SYS_SMC0_PULSE0_VAL \
e3150c77 AD	107	(AT91_SMC_PULSE_NWE(11) \| AT91_SMC_PULSE_NCS_WR(11) \| \
e3150c77 AD	108	AT91_SMC_PULSE_NRD(11) \| AT91_SMC_PULSE_NCS_RD(11))
32949232	109	#define CONFIG_SYS_SMC0_CYCLE0_VAL \
e3150c77	110	(AT91_SMC_CYCLE_NWE(22) \| AT91_SMC_CYCLE_NRD(22))
32949232	111	#define CONFIG_SYS_SMC0_MODE0_VAL \
e3150c77 AD	112	(AT91_SMC_MODE_RM_NRD \| AT91_SMC_MODE_WM_NWE \| \
	113	AT91_SMC_MODE_DBW_16 \| \
	114	AT91_SMC_MODE_TDF \| \
	115	AT91_SMC_MODE_TDF_CYCLE(6))
32949232 II	116
	117	/* user reset enable */
	118	#define CONFIG_SYS_RSTC_RMR_VAL \
	119	(AT91_RSTC_KEY \| \
e3150c77 AD	120	AT91_RSTC_CR_PROCRST \| \
	121	AT91_RSTC_MR_ERSTL(1) \| \
	122	AT91_RSTC_MR_ERSTL(2))
32949232 II	123
	124	/* Disable Watchdog */
	125	#define CONFIG_SYS_WDTC_WDMR_VAL \
e3150c77 AD	126	(AT91_WDT_MR_WDIDLEHLT \| AT91_WDT_MR_WDDBGHLT \| \
	127	AT91_WDT_MR_WDV(0xfff) \| \
	128	AT91_WDT_MR_WDDIS \| \
	129	AT91_WDT_MR_WDD(0xfff))
32949232 II	130
	131	#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
	132	#define CONFIG_SETUP_MEMORY_TAGS 1
	133	#define CONFIG_INITRD_TAG 1
	134
	135	#undef CONFIG_SKIP_LOWLEVEL_INIT
32949232 II	136
	137	/*
	138	* Hardware drivers
	139	*/
32949232 II	140
32949232 II	141	/* LCD */
32949232 II	142	#define LCD_BPP LCD_COLOR8
	143	#define CONFIG_LCD_LOGO 1
	144	#undef LCD_TEST_PATTERN
	145	#define CONFIG_LCD_INFO 1
	146	#define CONFIG_LCD_INFO_BELOW_LOGO 1
32949232 II	147	#define CONFIG_ATMEL_LCD 1
32949232 II	148	#define CONFIG_ATMEL_LCD_BGR555 1
32949232	149
32949232 II	150	/*
	151	* BOOTP options
	152	*/
	153	#define CONFIG_BOOTP_BOOTFILESIZE 1
32949232	154
32949232	155	/* SDRAM */
32949232 II	156	#define PHYS_SDRAM 0x20000000
	157	#define PHYS_SDRAM_SIZE 0x04000000 /* 64 megs */
	158
32949232	159	/* NAND flash */
32949232 II	160	#define CONFIG_SYS_MAX_NAND_DEVICE 1
	161	#define CONFIG_SYS_NAND_BASE 0x40000000
	162	#define CONFIG_SYS_NAND_DBW_8 1
	163	/* our ALE is AD22 */
	164	#define CONFIG_SYS_NAND_MASK_ALE (1 << 22)
	165	/* our CLE is AD21 */
	166	#define CONFIG_SYS_NAND_MASK_CLE (1 << 21)
ac45bb16 AB	167	#define CONFIG_SYS_NAND_ENABLE_PIN GPIO_PIN_PC(14)
ac45bb16 AB	168	#define CONFIG_SYS_NAND_READY_PIN GPIO_PIN_PA(16)
32949232	169
32949232	170	/* NOR flash */
32949232 II	171	#define PHYS_FLASH_1 0x10000000
	172	#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
	173	#define CONFIG_SYS_MAX_FLASH_SECT 256
	174	#define CONFIG_SYS_MAX_FLASH_BANKS 1
	175
	176	/* Ethernet */
	177	#define CONFIG_DRIVER_DM9000 1
	178	#define CONFIG_DM9000_BASE 0x30000000
	179	#define DM9000_IO CONFIG_DM9000_BASE
	180	#define DM9000_DATA (CONFIG_DM9000_BASE + 4)
	181	#define CONFIG_DM9000_USE_16BIT 1
	182	#define CONFIG_NET_RETRY_COUNT 20
	183	#define CONFIG_RESET_PHY_R 1
	184
	185	/* USB */
	186	#define CONFIG_USB_ATMEL
dcd2f1a0	187	#define CONFIG_USB_ATMEL_CLK_SEL_PLLB
32949232	188	#define CONFIG_USB_OHCI_NEW 1
32949232 II	189	#define CONFIG_SYS_USB_OHCI_CPU_INIT 1
	190	#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00500000
	191	#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9261"
	192	#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
32949232 II	193
	194	#define CONFIG_SYS_LOAD_ADDR 0x22000000
	195
32949232 II	196	#undef CONFIG_SYS_USE_DATAFLASH_CS0
	197	#undef CONFIG_SYS_USE_NANDFLASH
	198	#define CONFIG_SYS_USE_FLASH 1
	199
	200	#ifdef CONFIG_SYS_USE_DATAFLASH_CS0
	201
	202	/* bootstrap + u-boot + env + linux in dataflash on CS0 */
c53a825e WY	203	#define CONFIG_BOOTCOMMAND "sf probe 0; " \
	204	"sf read 0x22000000 0x84000 0x210000; " \
	205	"bootm 0x22000000"
32949232 II	206
	207	#elif defined(CONFIG_SYS_USE_NANDFLASH) /* CONFIG_SYS_USE_NANDFLASH */
	208
	209	/* bootstrap + u-boot + env + linux in nandflash */
32949232	210	#define CONFIG_BOOTCOMMAND "nand read 0x22000000 0xA0000 0x200000; bootm"
32949232 II	211
	212	#elif defined (CONFIG_SYS_USE_FLASH)
	213
32949232 II	214	#define CONFIG_ENV_OVERWRITE 1
	215
	216	/* JFFS Partition offset set */
	217	#define CONFIG_SYS_JFFS2_FIRST_BANK 0
	218	#define CONFIG_SYS_JFFS2_NUM_BANKS 1
	219
	220	/* 512k reserved for u-boot */
	221	#define CONFIG_SYS_JFFS2_FIRST_SECTOR 11
	222
	223	#define CONFIG_BOOTCOMMAND "run flashboot"
	224
32949232	225	#define CONFIG_CON_ROT "fbcon=rotate:3 "
32949232 II	226
32949232 II	227	#define CONFIG_EXTRA_ENV_SETTINGS \
43ede0bc TR	228	"mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
43ede0bc TR	229	"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
32949232 II	230	"partition=nand0,0\0" \
	231	"ramargs=setenv bootargs $(bootargs) $(mtdparts)\0" \
	232	"nfsargs=setenv bootargs root=/dev/nfs rw " \
	233	CONFIG_CON_ROT \
	234	"nfsroot=$(serverip):$(rootpath) $(mtdparts)\0" \
	235	"addip=setenv bootargs $(bootargs) " \
	236	"ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)"\
	237	":$(hostname):eth0:off\0" \
	238	"ramboot=tftpboot 0x22000000 vmImage;" \
	239	"run ramargs;run addip;bootm 22000000\0" \
	240	"nfsboot=tftpboot 0x22000000 vmImage;" \
	241	"run nfsargs;run addip;bootm 22000000\0" \
	242	"flashboot=run ramargs;run addip;bootm 0x10050000\0" \
	243	""
	244	#else
	245	#error "Undefined memory device"
	246	#endif
	247
32949232 II	248	/*
	249	* Size of malloc() pool
	250	*/
	251	#define CONFIG_SYS_MALLOC_LEN \
	252	ROUND(3 * CONFIG_ENV_SIZE + 128 * 1024, 0x1000)
32949232	253
4f81bf43	254	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
c53a825e	255	#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 16 * 1024 - \
4f81bf43 AD	256	GENERATED_GBL_DATA_SIZE)
4f81bf43 AD	257
32949232	258	#endif