[people/ms/u-boot.git] / include / configs / pm9g45.h

/*
 * (C) Copyright 2010
 * Ilko Iliev <iliev@ronetix.at>
 * Asen Dimov <dimov@ronetix.at>
 * Ronetix GmbH <www.ronetix.at>
 *
 * (C) Copyright 2007-2008
 * Stelian Pop <stelian@popies.net>
 * Lead Tech Design <www.leadtechdesign.com>
 *
 * Configuation settings for the PM9G45 board.
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __CONFIG_H
#define __CONFIG_H

/*
 * SoC must be defined first, before hardware.h is included.
 * In this case SoC is defined in boards.cfg.
 */
#include <asm/hardware.h>

#define CONFIG_PM9G45		1	/* It's an Ronetix PM9G45 */
#define CONFIG_SYS_AT91_CPU_NAME	"AT91SAM9G45"

#define MACH_TYPE_PM9G45	2672
#define CONFIG_MACH_TYPE	MACH_TYPE_PM9G45

/* ARM asynchronous clock */
#define CONFIG_SYS_AT91_MAIN_CLOCK	12000000 /* from 12 MHz crystal */
#define CONFIG_SYS_AT91_SLOW_CLOCK	32768		/* slow clock xtal */
#define CONFIG_SYS_TEXT_BASE		0x73f00000

#define CONFIG_ARCH_CPU_INIT

#define CONFIG_CMDLINE_TAG	1	/* enable passing of ATAGs */
#define CONFIG_SETUP_MEMORY_TAGS 1
#define CONFIG_INITRD_TAG	1

#define CONFIG_SKIP_LOWLEVEL_INIT
#define CONFIG_BOARD_EARLY_INIT_F

/*
 * Hardware drivers
 */
#define CONFIG_AT91_GPIO	1
#define CONFIG_ATMEL_USART	1
#define CONFIG_USART_BASE		ATMEL_BASE_DBGU
#define	CONFIG_USART_ID			ATMEL_ID_SYS

#define CONFIG_SYS_USE_NANDFLASH	1

/* LED */
#define CONFIG_AT91_LED
#define CONFIG_RED_LED		GPIO_PIN_PD(31) /* this is the user1 led */
#define CONFIG_GREEN_LED	GPIO_PIN_PD(0)  /* this is the user2 led */

#define CONFIG_BOOTDELAY	3

/*
 * BOOTP options
 */
#define CONFIG_BOOTP_BOOTFILESIZE	1
#define CONFIG_BOOTP_BOOTPATH		1
#define CONFIG_BOOTP_GATEWAY		1
#define CONFIG_BOOTP_HOSTNAME		1

/*
 * Command line configuration.
 */
#include <config_cmd_default.h>
#undef CONFIG_CMD_FPGA
#undef CONFIG_CMD_IMLS

#define CONFIG_CMD_CACHE
#define CONFIG_CMD_PING		1
#define CONFIG_CMD_DHCP		1
#define CONFIG_CMD_NAND		1
#define CONFIG_CMD_USB		1

#define CONFIG_CMD_JFFS2		1
#define CONFIG_JFFS2_CMDLINE		1
#define CONFIG_JFFS2_NAND		1
#define CONFIG_JFFS2_DEV		"nand0" /* NAND dev jffs2 lives on */
#define CONFIG_JFFS2_PART_OFFSET	0	/* start of jffs2 partition */
#define CONFIG_JFFS2_PART_SIZE		(256 * 1024 * 1024) /* partition */

/* SDRAM */
#define CONFIG_NR_DRAM_BANKS		1
#define PHYS_SDRAM			0x70000000
#define PHYS_SDRAM_SIZE			0x08000000	/* 128 megs */

/* NOR flash, not available */
#define CONFIG_SYS_NO_FLASH		1
#undef CONFIG_CMD_FLASH

/* NAND flash */
#ifdef CONFIG_CMD_NAND
#define CONFIG_NAND_ATMEL
#define CONFIG_SYS_MAX_NAND_DEVICE	1
#define CONFIG_SYS_NAND_BASE		0x40000000
#define CONFIG_SYS_NAND_DBW_8		1
/* our ALE is AD21 */
#define CONFIG_SYS_NAND_MASK_ALE	(1 << 21)
/* our CLE is AD22 */
#define CONFIG_SYS_NAND_MASK_CLE	(1 << 22)
#define CONFIG_SYS_NAND_ENABLE_PIN	GPIO_PIN_PC(14)
#define CONFIG_SYS_NAND_READY_PIN	GPIO_PIN_PD(3)

#endif

/* Ethernet */
#define CONFIG_MACB			1
#define CONFIG_RMII			1
#define CONFIG_NET_RETRY_COUNT		20
#define CONFIG_RESET_PHY_R		1

/* USB */
#define CONFIG_USB_ATMEL
#define CONFIG_USB_ATMEL_CLK_SEL_UPLL
#define CONFIG_USB_OHCI_NEW		1
#define CONFIG_DOS_PARTITION		1
#define CONFIG_SYS_USB_OHCI_CPU_INIT	1
#define CONFIG_SYS_USB_OHCI_REGS_BASE	0x00700000 /* _UHP_OHCI_BASE */
#define CONFIG_SYS_USB_OHCI_SLOT_NAME	"at91sam9g45"
#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS	2
#define CONFIG_USB_STORAGE		1

/* board specific(not enough SRAM) */
#define CONFIG_AT91SAM9G45_LCD_BASE	PHYS_SDRAM + 0xE00000

#define CONFIG_SYS_LOAD_ADDR		PHYS_SDRAM + 0x2000000 /* load addr */

#define CONFIG_SYS_MEMTEST_START	PHYS_SDRAM
#define CONFIG_SYS_MEMTEST_END		CONFIG_AT91SAM9G45_LCD_BASE

/* bootstrap + u-boot + env + linux in nandflash */
#define CONFIG_ENV_IS_IN_NAND		1
#define CONFIG_ENV_OFFSET		0x60000
#define CONFIG_ENV_OFFSET_REDUND	0x80000
#define CONFIG_ENV_SIZE			0x20000		/* 1 sector = 128 kB */
#define CONFIG_BOOTCOMMAND	"nand read 0x72000000 0x200000 0x200000; bootm"
#define CONFIG_BOOTARGS		"fbcon=rotate:3 console=tty0 " \
				"console=ttyS0,115200 " \
				"root=/dev/mtdblock4 " \
				"mtdparts=atmel_nand:128k(bootstrap)ro," \
				"256k(uboot)ro,1664k(env)," \
				"2M(linux)ro,-(root) rw " \
				"rootfstype=jffs2"

#define CONFIG_BAUDRATE			115200

#define CONFIG_SYS_PROMPT		"U-Boot> "
#define CONFIG_SYS_CBSIZE		256
#define CONFIG_SYS_MAXARGS		16
#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
					sizeof(CONFIG_SYS_PROMPT) + 16)
#define CONFIG_SYS_LONGHELP		1
#define CONFIG_CMDLINE_EDITING		1
#define CONFIG_AUTO_COMPLETE
#define CONFIG_SYS_HUSH_PARSER

/*
 * Size of malloc() pool
 */
#define CONFIG_SYS_MALLOC_LEN		ROUND(3 * CONFIG_ENV_SIZE + 128*1024,\
					0x1000)

#define CONFIG_SYS_SDRAM_BASE	PHYS_SDRAM
#define CONFIG_SYS_INIT_SP_ADDR	(CONFIG_SYS_SDRAM_BASE + 0x1000 - \
				GENERATED_GBL_DATA_SIZE)

#endif
Commit	Line	Data
b5d289fc AD	1	/*
	2	* (C) Copyright 2010
	3	* Ilko Iliev <iliev@ronetix.at>
	4	* Asen Dimov <dimov@ronetix.at>
	5	* Ronetix GmbH <www.ronetix.at>
	6	*
	7	* (C) Copyright 2007-2008
c9e798d3	8	* Stelian Pop <stelian@popies.net>
b5d289fc AD	9	* Lead Tech Design <www.leadtechdesign.com>
	10	*
	11	* Configuation settings for the PM9G45 board.
	12	*
1a459660	13	* SPDX-License-Identifier: GPL-2.0+
b5d289fc AD	14	*/
	15
	16	#ifndef __CONFIG_H
	17	#define __CONFIG_H
	18
eb6e608b AD	19	/*
	20	* SoC must be defined first, before hardware.h is included.
	21	* In this case SoC is defined in boards.cfg.
	22	*/
	23	#include <asm/hardware.h>
	24
b5d289fc	25	#define CONFIG_PM9G45 1 /* It's an Ronetix PM9G45 */
eb6e608b	26	#define CONFIG_SYS_AT91_CPU_NAME "AT91SAM9G45"
b5d289fc	27
a3e09cc2 AD	28	#define MACH_TYPE_PM9G45 2672
	29	#define CONFIG_MACH_TYPE MACH_TYPE_PM9G45
	30
b5d289fc AD	31	/* ARM asynchronous clock */
b5d289fc AD	32	#define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */
eb6e608b	33	#define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */
eb6e608b	34	#define CONFIG_SYS_TEXT_BASE 0x73f00000
b5d289fc AD	35
	36	#define CONFIG_ARCH_CPU_INIT
	37
	38	#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
	39	#define CONFIG_SETUP_MEMORY_TAGS 1
	40	#define CONFIG_INITRD_TAG 1
	41
	42	#define CONFIG_SKIP_LOWLEVEL_INIT
c4df2149	43	#define CONFIG_BOARD_EARLY_INIT_F
b5d289fc AD	44
	45	/*
	46	* Hardware drivers
	47	*/
	48	#define CONFIG_AT91_GPIO 1
	49	#define CONFIG_ATMEL_USART 1
eb6e608b AD	50	#define CONFIG_USART_BASE ATMEL_BASE_DBGU
eb6e608b AD	51	#define CONFIG_USART_ID ATMEL_ID_SYS
b5d289fc AD	52
	53	#define CONFIG_SYS_USE_NANDFLASH 1
	54
	55	/* LED */
	56	#define CONFIG_AT91_LED
bcf9fe37 AB	57	#define CONFIG_RED_LED GPIO_PIN_PD(31) /* this is the user1 led */
bcf9fe37 AB	58	#define CONFIG_GREEN_LED GPIO_PIN_PD(0) /* this is the user2 led */
b5d289fc AD	59
	60	#define CONFIG_BOOTDELAY 3
	61
	62	/*
	63	* BOOTP options
	64	*/
	65	#define CONFIG_BOOTP_BOOTFILESIZE 1
	66	#define CONFIG_BOOTP_BOOTPATH 1
	67	#define CONFIG_BOOTP_GATEWAY 1
	68	#define CONFIG_BOOTP_HOSTNAME 1
	69
	70	/*
	71	* Command line configuration.
	72	*/
	73	#include <config_cmd_default.h>
	74	#undef CONFIG_CMD_FPGA
	75	#undef CONFIG_CMD_IMLS
	76
37ee3ccc	77	#define CONFIG_CMD_CACHE
b5d289fc AD	78	#define CONFIG_CMD_PING 1
	79	#define CONFIG_CMD_DHCP 1
	80	#define CONFIG_CMD_NAND 1
	81	#define CONFIG_CMD_USB 1
	82
	83	#define CONFIG_CMD_JFFS2 1
	84	#define CONFIG_JFFS2_CMDLINE 1
	85	#define CONFIG_JFFS2_NAND 1
	86	#define CONFIG_JFFS2_DEV "nand0" /* NAND dev jffs2 lives on */
	87	#define CONFIG_JFFS2_PART_OFFSET 0 /* start of jffs2 partition */
	88	#define CONFIG_JFFS2_PART_SIZE (256 * 1024 * 1024) /* partition */
	89
	90	/* SDRAM */
	91	#define CONFIG_NR_DRAM_BANKS 1
	92	#define PHYS_SDRAM 0x70000000
	93	#define PHYS_SDRAM_SIZE 0x08000000 /* 128 megs */
	94
	95	/* NOR flash, not available */
	96	#define CONFIG_SYS_NO_FLASH 1
	97	#undef CONFIG_CMD_FLASH
	98
	99	/* NAND flash */
	100	#ifdef CONFIG_CMD_NAND
b5d289fc AD	101	#define CONFIG_NAND_ATMEL
	102	#define CONFIG_SYS_MAX_NAND_DEVICE 1
	103	#define CONFIG_SYS_NAND_BASE 0x40000000
	104	#define CONFIG_SYS_NAND_DBW_8 1
	105	/* our ALE is AD21 */
	106	#define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
	107	/* our CLE is AD22 */
	108	#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
ac45bb16 AB	109	#define CONFIG_SYS_NAND_ENABLE_PIN GPIO_PIN_PC(14)
ac45bb16 AB	110	#define CONFIG_SYS_NAND_READY_PIN GPIO_PIN_PD(3)
b5d289fc AD	111
	112	#endif
	113
	114	/* Ethernet */
	115	#define CONFIG_MACB 1
	116	#define CONFIG_RMII 1
b5d289fc AD	117	#define CONFIG_NET_RETRY_COUNT 20
	118	#define CONFIG_RESET_PHY_R 1
	119
	120	/* USB */
	121	#define CONFIG_USB_ATMEL
dcd2f1a0	122	#define CONFIG_USB_ATMEL_CLK_SEL_UPLL
b5d289fc AD	123	#define CONFIG_USB_OHCI_NEW 1
	124	#define CONFIG_DOS_PARTITION 1
	125	#define CONFIG_SYS_USB_OHCI_CPU_INIT 1
	126	#define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00700000 /* _UHP_OHCI_BASE */
	127	#define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9g45"
	128	#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
	129	#define CONFIG_USB_STORAGE 1
	130
	131	/* board specific(not enough SRAM) */
	132	#define CONFIG_AT91SAM9G45_LCD_BASE PHYS_SDRAM + 0xE00000
	133
	134	#define CONFIG_SYS_LOAD_ADDR PHYS_SDRAM + 0x2000000 /* load addr */
	135
	136	#define CONFIG_SYS_MEMTEST_START PHYS_SDRAM
	137	#define CONFIG_SYS_MEMTEST_END CONFIG_AT91SAM9G45_LCD_BASE
	138
	139	/* bootstrap + u-boot + env + linux in nandflash */
	140	#define CONFIG_ENV_IS_IN_NAND 1
	141	#define CONFIG_ENV_OFFSET 0x60000
	142	#define CONFIG_ENV_OFFSET_REDUND 0x80000
	143	#define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */
	144	#define CONFIG_BOOTCOMMAND "nand read 0x72000000 0x200000 0x200000; bootm"
	145	#define CONFIG_BOOTARGS "fbcon=rotate:3 console=tty0 " \
	146	"console=ttyS0,115200 " \
	147	"root=/dev/mtdblock4 " \
	148	"mtdparts=atmel_nand:128k(bootstrap)ro," \
	149	"256k(uboot)ro,1664k(env)," \
	150	"2M(linux)ro,-(root) rw " \
	151	"rootfstype=jffs2"
	152
	153	#define CONFIG_BAUDRATE 115200
b5d289fc AD	154
	155	#define CONFIG_SYS_PROMPT "U-Boot> "
	156	#define CONFIG_SYS_CBSIZE 256
	157	#define CONFIG_SYS_MAXARGS 16
	158	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
	159	sizeof(CONFIG_SYS_PROMPT) + 16)
	160	#define CONFIG_SYS_LONGHELP 1
	161	#define CONFIG_CMDLINE_EDITING 1
	162	#define CONFIG_AUTO_COMPLETE
	163	#define CONFIG_SYS_HUSH_PARSER
b5d289fc AD	164
	165	/*
	166	* Size of malloc() pool
	167	*/
	168	#define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + 128*1024,\
	169	0x1000)
b5d289fc	170
510f794c AD	171	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
	172	#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - \
	173	GENERATED_GBL_DATA_SIZE)
	174
b5d289fc	175	#endif