[people/ms/u-boot.git] / include / configs / pxa255_idp.h

/*
 * (C) Copyright 2002
 * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
 *
 * (C) Copyright 2002
 * Sysgo Real-Time Solutions, GmbH <www.elinos.com>
 * Marius Groeger <mgroeger@sysgo.de>
 *
 * Copied from lubbock.h
 *
 * (C) Copyright 2004
 * BEC Systems <http://bec-systems.com>
 * Cliff Brake <cliff.brake@gmail.com>
 * Configuation settings for the Accelent/Vibren PXA255 IDP
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

#ifndef __CONFIG_H
#define __CONFIG_H

#include <asm/arch/pxa-regs.h>

/*
 * If we are developing, we might want to start U-Boot from RAM
 * so we MUST NOT initialize critical regs like mem-timing ...
 */
#undef CONFIG_SKIP_LOWLEVEL_INIT			/* define for developing */
#define	CONFIG_SYS_TEXT_BASE	0x0

/*
 * define the following to enable debug blinks.  A debug blink function
 * must be defined in memsetup.S
 */
#undef DEBUG_BLINK_ENABLE
#undef DEBUG_BLINKC_ENABLE

/*
 * High Level Configuration Options
 * (easy to change)
 */
#define CONFIG_CPU_PXA25X		1	/* This is an PXA250 CPU    */

#undef CONFIG_LCD
#ifdef CONFIG_LCD
#define CONFIG_SHARP_LM8V31
#endif

#define CONFIG_MMC		1
#define CONFIG_DOS_PARTITION	1
#define CONFIG_BOARD_LATE_INIT

/* we will never enable dcache, because we have to setup MMU first */
#define CONFIG_SYS_DCACHE_OFF

/*
 * Size of malloc() pool
 */
#define CONFIG_SYS_MALLOC_LEN	    (CONFIG_ENV_SIZE + 128*1024)

/*
 * PXA250 IDP memory map information
 */

#define IDP_CS5_ETH_OFFSET	0x03400000


/*
 * Hardware drivers
 */
#define CONFIG_SMC91111
#define CONFIG_SMC91111_BASE	(PXA_CS5_PHYS + IDP_CS5_ETH_OFFSET + 0x300)
#define CONFIG_SMC_USE_32_BIT	1
/* #define CONFIG_SMC_USE_IOFUNCS */

/* the following has to be set high -- suspect something is wrong with
 * with the tftp timeout routines. FIXME!!!
 */
#define CONFIG_NET_RETRY_COUNT	100

/*
 * select serial console configuration
 */
#define CONFIG_PXA_SERIAL
#define CONFIG_FFUART	       1       /* we use FFUART on LUBBOCK */
#define CONFIG_CONS_INDEX	3

/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE

#define CONFIG_BAUDRATE		115200


/*
 * BOOTP options
 */
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME


/*
 * Command line configuration.
 */
#include <config_cmd_default.h>

#define CONFIG_CMD_FAT
#define CONFIG_CMD_DHCP

#define CONFIG_BOOTDELAY	3
#define CONFIG_BOOTCOMMAND	"bootm 40000"
#define CONFIG_BOOTARGS		"root=/dev/mtdblock2 rootfstype=cramfs console=ttyS0,115200"

#define CONFIG_CMDLINE_TAG		1	/* enable passing of ATAGs */
#define CONFIG_SETUP_MEMORY_TAGS	1
/* #define CONFIG_INITRD_TAG		1 */

/*
 * Current memory map for Vibren supplied Linux images:
 *
 * Flash:
 * 0 - 0x3ffff (size = 0x40000): bootloader
 * 0x40000 - 0x13ffff (size = 0x100000): kernel
 * 0x140000 - 0x1f3ffff (size = 0x1e00000): jffs
 *
 * RAM:
 * 0xa0008000 - kernel is loaded
 * 0xa3000000 - Uboot runs (48MB into RAM)
 *
 */

#define CONFIG_EXTRA_ENV_SETTINGS					\
	"prog_boot_mmc="						\
			"mw.b 0xa0000000 0xff 0x40000; "		\
			"if	 mmcinit && "				\
				"fatload mmc 0 0xa0000000 u-boot.bin; "	\
			"then "						\
				"protect off 0x0 0x3ffff; "		\
				"erase 0x0 0x3ffff; "			\
				"cp.b 0xa0000000 0x0 0x40000; "		\
				"reset;"				\
			"fi\0"						\
	"prog_uzImage_mmc="						\
			"mw.b 0xa0000000 0xff 0x100000; "		\
			"if	 mmcinit && "				\
				"fatload mmc 0 0xa0000000 uzImage; "	\
			"then "						\
				"protect off 0x40000 0xfffff; "		\
				"erase 0x40000 0xfffff; "		\
				"cp.b 0xa0000000 0x40000 0x100000; "	\
			"fi\0"						\
	"prog_jffs_mmc="						\
			"mw.b 0xa0000000 0xff 0x1e00000; "		\
			"if	 mmcinit && "				\
				"fatload mmc 0 0xa0000000 root.jffs; "	\
			"then "						\
				"protect off 0x140000 0x1f3ffff; "	\
				"erase 0x140000 0x1f3ffff; "		\
				"cp.b 0xa0000000 0x140000 0x1e00000; "	\
			"fi\0"						\
	"boot_mmc="							\
			"if	 mmcinit && "				\
				"fatload mmc 0 0xa1000000 uzImage && "	\
			"then "						\
				"bootm 0xa1000000; "			\
			"fi\0"						\
	"prog_boot_net="						\
			"mw.b 0xa0000000 0xff 0x100000; "		\
			"if	 bootp 0xa0000000 u-boot.bin; "		\
			"then "						\
				"protect off 0x0 0x3ffff; "		\
				"erase 0x0 0x3ffff; "			\
				"cp.b 0xa0000000 0x0 0x40000; "		\
				"reset; "				\
			"fi\0"						\
	"prog_uzImage_net="						\
			"mw.b 0xa0000000 0xff 0x100000; "		\
			"if	 bootp 0xa0000000 uzImage; "		\
			"then "						\
				"protect off 0x40000 0xfffff; "		\
				"erase 0x40000 0xfffff; "		\
				"cp.b 0xa0000000 0x40000 0x100000; "	\
			"fi\0"						\
	"prog_jffs_net="						\
			"mw.b 0xa0000000 0xff 0x1e00000; "		\
			"if	 bootp 0xa0000000 root.jffs; "		\
			"then "						\
				"protect off 0x140000 0x1f3ffff; "	\
				"erase 0x140000 0x1f3ffff; "		\
				"cp.b 0xa0000000 0x140000 0x1e00000; "	\
			"fi\0"


/*	"erase_env="			*/
/*			"protect off"	*/


#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE	115200		/* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX	2		/* which serial port to use */
#endif

/*
 * Miscellaneous configurable options
 */
#define CONFIG_SYS_HUSH_PARSER		1

#define CONFIG_SYS_LONGHELP				/* undef to save memory		*/
#ifdef CONFIG_SYS_HUSH_PARSER
#define CONFIG_SYS_PROMPT		"$ "		/* Monitor Command Prompt */
#else
#define CONFIG_SYS_PROMPT		"=> "		/* Monitor Command Prompt */
#endif
#define CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size	*/
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
#define CONFIG_SYS_MAXARGS		16		/* max number of command args	*/
#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
#define CONFIG_SYS_DEVICE_NULLDEV	1

#define CONFIG_SYS_MEMTEST_START	0xa0400000	/* memtest works on	*/
#define CONFIG_SYS_MEMTEST_END		0xa0800000	/* 4 ... 8 MB in DRAM	*/

#define CONFIG_SYS_LOAD_ADDR		0xa0800000	/* default load address */

#define CONFIG_SYS_HZ			1000
#define CONFIG_SYS_CPUSPEED		0x161		/* set core clock to 400/200/100 MHz */

#define RTC	1				/* enable 32KHz osc */

#ifdef CONFIG_MMC
#define CONFIG_PXA_MMC
#define CONFIG_CMD_MMC
#define CONFIG_SYS_MMC_BASE		0xF0000000
#endif

/*
 * Physical Memory Map
 */
#define CONFIG_NR_DRAM_BANKS	1	   /* we have 1 bank of DRAM */
#define PHYS_SDRAM_1		0xa0000000 /* SDRAM Bank #1 */
#define PHYS_SDRAM_1_SIZE	0x04000000 /* 64 MB */
#define PHYS_SDRAM_2		0xa4000000 /* SDRAM Bank #2 */
#define PHYS_SDRAM_2_SIZE	0x00000000 /* 0 MB */
#define PHYS_SDRAM_3		0xa8000000 /* SDRAM Bank #3 */
#define PHYS_SDRAM_3_SIZE	0x00000000 /* 0 MB */
#define PHYS_SDRAM_4		0xac000000 /* SDRAM Bank #4 */
#define PHYS_SDRAM_4_SIZE	0x00000000 /* 0 MB */

#define PHYS_FLASH_1		0x00000000 /* Flash Bank #1 */
#define PHYS_FLASH_2		0x04000000 /* Flash Bank #2 */
#define PHYS_FLASH_SIZE		0x02000000 /* 32 MB */
#define PHYS_FLASH_BANK_SIZE	0x02000000 /* 32 MB Banks */
#define PHYS_FLASH_SECT_SIZE	0x00040000 /* 256 KB sectors (x2) */

#define CONFIG_SYS_DRAM_BASE		0xa0000000
#define CONFIG_SYS_DRAM_SIZE		0x04000000

#define CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1

#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
#define	CONFIG_SYS_INIT_SP_ADDR		0xfffff800

/*
 * GPIO settings
 */

#define CONFIG_SYS_GAFR0_L_VAL	0x80001005
#define CONFIG_SYS_GAFR0_U_VAL	0xa5128012
#define CONFIG_SYS_GAFR1_L_VAL	0x699a9558
#define CONFIG_SYS_GAFR1_U_VAL	0xaaa5aa6a
#define CONFIG_SYS_GAFR2_L_VAL	0xaaaaaaaa
#define CONFIG_SYS_GAFR2_U_VAL	0x2
#define CONFIG_SYS_GPCR0_VAL	0x1800400
#define CONFIG_SYS_GPCR1_VAL	0x0
#define CONFIG_SYS_GPCR2_VAL	0x0
#define CONFIG_SYS_GPDR0_VAL	0xc1818440
#define CONFIG_SYS_GPDR1_VAL	0xfcffab82
#define CONFIG_SYS_GPDR2_VAL	0x1ffff
#define CONFIG_SYS_GPSR0_VAL	0x8000
#define CONFIG_SYS_GPSR1_VAL	0x3f0002
#define CONFIG_SYS_GPSR2_VAL	0x1c000

#define CONFIG_SYS_PSSR_VAL		0x20

#define	CONFIG_SYS_CCCR			CCCR_L27|CCCR_M2|CCCR_N10
#define	CONFIG_SYS_CKEN			0x0

/*
 * Memory settings
 */
#define CONFIG_SYS_MSC0_VAL		0x29DCA4D2
#define CONFIG_SYS_MSC1_VAL		0x43AC494C
#define CONFIG_SYS_MSC2_VAL		0x39D449D4
#define CONFIG_SYS_MDCNFG_VAL		0x090009C9
#define CONFIG_SYS_MDREFR_VAL		0x0085C017
#define CONFIG_SYS_MDMRS_VAL		0x00220022
#define	CONFIG_SYS_FLYCNFG_VAL		0x00000000
#define	CONFIG_SYS_SXCNFG_VAL		0x00000000

/*
 * PCMCIA and CF Interfaces
 */
#define CONFIG_SYS_MECR_VAL		0x00000003
#define CONFIG_SYS_MCMEM0_VAL		0x00014405
#define CONFIG_SYS_MCMEM1_VAL		0x00014405
#define CONFIG_SYS_MCATT0_VAL		0x00014405
#define CONFIG_SYS_MCATT1_VAL		0x00014405
#define CONFIG_SYS_MCIO0_VAL		0x00014405
#define CONFIG_SYS_MCIO1_VAL		0x00014405

/*
 * FLASH and environment organization
 */
#define CONFIG_SYS_FLASH_CFI
#define CONFIG_FLASH_CFI_DRIVER	1

#define CONFIG_SYS_MONITOR_BASE	0
#define CONFIG_SYS_MONITOR_LEN		PHYS_FLASH_SECT_SIZE

#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
#define CONFIG_SYS_MAX_FLASH_SECT	128  /* max number of sectors on one chip    */

#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE	1

/* timeout values are in ticks */
#define CONFIG_SYS_FLASH_ERASE_TOUT	(25*CONFIG_SYS_HZ) /* Timeout for Flash Erase */
#define CONFIG_SYS_FLASH_WRITE_TOUT	(25*CONFIG_SYS_HZ) /* Timeout for Flash Write */

/* put cfg at end of flash for now */
#define CONFIG_ENV_IS_IN_FLASH	1
 /* Addr of Environment Sector	*/
#define CONFIG_ENV_ADDR		(PHYS_FLASH_1 + PHYS_FLASH_SIZE - 0x40000)
#define CONFIG_ENV_SIZE		PHYS_FLASH_SECT_SIZE	/* Total Size of Environment Sector	*/
#define	CONFIG_ENV_SECT_SIZE	(PHYS_FLASH_SECT_SIZE / 16)

#endif	/* __CONFIG_H */
Commit	Line	Data
70a2047f WD	1	/*
	2	* (C) Copyright 2002
	3	* Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
	4	*
	5	* (C) Copyright 2002
	6	* Sysgo Real-Time Solutions, GmbH <www.elinos.com>
	7	* Marius Groeger <mgroeger@sysgo.de>
	8	*
	9	* Copied from lubbock.h
	10	*
	11	* (C) Copyright 2004
	12	* BEC Systems <http://bec-systems.com>
	13	* Cliff Brake <cliff.brake@gmail.com>
	14	* Configuation settings for the Accelent/Vibren PXA255 IDP
	15	*
	16	* See file CREDITS for list of people who contributed to this
	17	* project.
	18	*
	19	* This program is free software; you can redistribute it and/or
	20	* modify it under the terms of the GNU General Public License as
	21	* published by the Free Software Foundation; either version 2 of
	22	* the License, or (at your option) any later version.
	23	*
	24	* This program is distributed in the hope that it will be useful,
	25	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	26	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	27	* GNU General Public License for more details.
	28	*
	29	* You should have received a copy of the GNU General Public License
	30	* along with this program; if not, write to the Free Software
	31	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	32	* MA 02111-1307 USA
	33	*/
	34
	35	#ifndef __CONFIG_H
	36	#define __CONFIG_H
	37
	38	#include <asm/arch/pxa-regs.h>
	39
	40	/*
2a4741d9	41	* If we are developing, we might want to start U-Boot from RAM
70a2047f WD	42	* so we MUST NOT initialize critical regs like mem-timing ...
70a2047f WD	43	*/
2a4741d9	44	#undef CONFIG_SKIP_LOWLEVEL_INIT /* define for developing */
65bd6a90	45	#define CONFIG_SYS_TEXT_BASE 0x0
70a2047f WD	46
	47	/*
	48	* define the following to enable debug blinks. A debug blink function
	49	* must be defined in memsetup.S
	50	*/
	51	#undef DEBUG_BLINK_ENABLE
	52	#undef DEBUG_BLINKC_ENABLE
	53
	54	/*
	55	* High Level Configuration Options
	56	* (easy to change)
	57	*/
abc20aba	58	#define CONFIG_CPU_PXA25X 1 /* This is an PXA250 CPU */
70a2047f WD	59
	60	#undef CONFIG_LCD
	61	#ifdef CONFIG_LCD
	62	#define CONFIG_SHARP_LM8V31
	63	#endif
	64
	65	#define CONFIG_MMC 1
2a4741d9	66	#define CONFIG_DOS_PARTITION 1
9660e442	67	#define CONFIG_BOARD_LATE_INIT
70a2047f	68
b3acb6cd	69	/* we will never enable dcache, because we have to setup MMU first */
e47f2db5	70	#define CONFIG_SYS_DCACHE_OFF
b3acb6cd	71
70a2047f WD	72	/*
	73	* Size of malloc() pool
	74	*/
6d0f6bcf	75	#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
70a2047f WD	76
	77	/*
	78	* PXA250 IDP memory map information
	79	*/
	80
	81	#define IDP_CS5_ETH_OFFSET 0x03400000
	82
	83
	84	/*
	85	* Hardware drivers
	86	*/
7194ab80	87	#define CONFIG_SMC91111
70a2047f WD	88	#define CONFIG_SMC91111_BASE (PXA_CS5_PHYS + IDP_CS5_ETH_OFFSET + 0x300)
	89	#define CONFIG_SMC_USE_32_BIT 1
	90	/* #define CONFIG_SMC_USE_IOFUNCS */
	91
	92	/* the following has to be set high -- suspect something is wrong with
	93	* with the tftp timeout routines. FIXME!!!
	94	*/
	95	#define CONFIG_NET_RETRY_COUNT 100
	96
	97	/*
	98	* select serial console configuration
	99	*/
379be585	100	#define CONFIG_PXA_SERIAL
70a2047f	101	#define CONFIG_FFUART 1 /* we use FFUART on LUBBOCK */
ce6971cd	102	#define CONFIG_CONS_INDEX 3
70a2047f WD	103
	104	/* allow to overwrite serial and ethaddr */
	105	#define CONFIG_ENV_OVERWRITE
	106
	107	#define CONFIG_BAUDRATE 115200
	108
70a2047f	109
079a136c JL	110	/*
	111	* BOOTP options
	112	*/
	113	#define CONFIG_BOOTP_BOOTFILESIZE
	114	#define CONFIG_BOOTP_BOOTPATH
	115	#define CONFIG_BOOTP_GATEWAY
	116	#define CONFIG_BOOTP_HOSTNAME
	117
	118
26a34560 JL	119	/*
	120	* Command line configuration.
	121	*/
	122	#include <config_cmd_default.h>
	123
26a34560 JL	124	#define CONFIG_CMD_FAT
	125	#define CONFIG_CMD_DHCP
	126
70a2047f WD	127	#define CONFIG_BOOTDELAY 3
	128	#define CONFIG_BOOTCOMMAND "bootm 40000"
	129	#define CONFIG_BOOTARGS "root=/dev/mtdblock2 rootfstype=cramfs console=ttyS0,115200"
25dbe98a WD	130
	131	#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
	132	#define CONFIG_SETUP_MEMORY_TAGS 1
	133	/* #define CONFIG_INITRD_TAG 1 */
70a2047f WD	134
	135	/*
	136	* Current memory map for Vibren supplied Linux images:
	137	*
	138	* Flash:
	139	* 0 - 0x3ffff (size = 0x40000): bootloader
	140	* 0x40000 - 0x13ffff (size = 0x100000): kernel
	141	* 0x140000 - 0x1f3ffff (size = 0x1e00000): jffs
	142	*
	143	* RAM:
	144	* 0xa0008000 - kernel is loaded
	145	* 0xa3000000 - Uboot runs (48MB into RAM)
	146	*
	147	*/
	148
	149	#define CONFIG_EXTRA_ENV_SETTINGS \
	150	"prog_boot_mmc=" \
	151	"mw.b 0xa0000000 0xff 0x40000; " \
	152	"if mmcinit && " \
	153	"fatload mmc 0 0xa0000000 u-boot.bin; " \
	154	"then " \
	155	"protect off 0x0 0x3ffff; " \
	156	"erase 0x0 0x3ffff; " \
	157	"cp.b 0xa0000000 0x0 0x40000; " \
	158	"reset;" \
	159	"fi\0" \
	160	"prog_uzImage_mmc=" \
	161	"mw.b 0xa0000000 0xff 0x100000; " \
	162	"if mmcinit && " \
	163	"fatload mmc 0 0xa0000000 uzImage; " \
	164	"then " \
	165	"protect off 0x40000 0xfffff; " \
	166	"erase 0x40000 0xfffff; " \
	167	"cp.b 0xa0000000 0x40000 0x100000; " \
	168	"fi\0" \
	169	"prog_jffs_mmc=" \
	170	"mw.b 0xa0000000 0xff 0x1e00000; " \
	171	"if mmcinit && " \
	172	"fatload mmc 0 0xa0000000 root.jffs; " \
	173	"then " \
	174	"protect off 0x140000 0x1f3ffff; " \
	175	"erase 0x140000 0x1f3ffff; " \
	176	"cp.b 0xa0000000 0x140000 0x1e00000; " \
	177	"fi\0" \
	178	"boot_mmc=" \
	179	"if mmcinit && " \
	180	"fatload mmc 0 0xa1000000 uzImage && " \
	181	"then " \
	182	"bootm 0xa1000000; " \
	183	"fi\0" \
	184	"prog_boot_net=" \
	185	"mw.b 0xa0000000 0xff 0x100000; " \
	186	"if bootp 0xa0000000 u-boot.bin; " \
	187	"then " \
	188	"protect off 0x0 0x3ffff; " \
	189	"erase 0x0 0x3ffff; " \
	190	"cp.b 0xa0000000 0x0 0x40000; " \
	191	"reset; " \
	192	"fi\0" \
	193	"prog_uzImage_net=" \
	194	"mw.b 0xa0000000 0xff 0x100000; " \
	195	"if bootp 0xa0000000 uzImage; " \
	196	"then " \
	197	"protect off 0x40000 0xfffff; " \
198	"erase 0x40000 0xfffff; " \
199	"cp.b 0xa0000000 0x40000 0x100000; " \
200	"fi\0" \
201	"prog_jffs_net=" \
202	"mw.b 0xa0000000 0xff 0x1e00000; " \
203	"if bootp 0xa0000000 root.jffs; " \
204	"then " \
205	"protect off 0x140000 0x1f3ffff; " \
206	"erase 0x140000 0x1f3ffff; " \
207	"cp.b 0xa0000000 0x140000 0x1e00000; " \
208	"fi\0"
209
210
211	/* "erase_env=" */
212	/* "protect off" */
213
214
26a34560	215	#if defined(CONFIG_CMD_KGDB)
70a2047f WD	216	#define CONFIG_KGDB_BAUDRATE 115200 /* speed to run kgdb serial port */
	217	#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
	218	#endif
	219
	220	/*
	221	* Miscellaneous configurable options
	222	*/
6d0f6bcf	223	#define CONFIG_SYS_HUSH_PARSER 1
70a2047f	224
6d0f6bcf JCPV	225	#define CONFIG_SYS_LONGHELP /* undef to save memory */
	226	#ifdef CONFIG_SYS_HUSH_PARSER
	227	#define CONFIG_SYS_PROMPT "$ " /* Monitor Command Prompt */
70a2047f	228	#else
6d0f6bcf	229	#define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */
70a2047f	230	#endif
6d0f6bcf JCPV	231	#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
	232	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
	233	#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
	234	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
	235	#define CONFIG_SYS_DEVICE_NULLDEV 1
70a2047f	236
6d0f6bcf JCPV	237	#define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */
6d0f6bcf JCPV	238	#define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */
70a2047f	239
6d0f6bcf	240	#define CONFIG_SYS_LOAD_ADDR 0xa0800000 /* default load address */
70a2047f	241
94a33129	242	#define CONFIG_SYS_HZ 1000
6d0f6bcf	243	#define CONFIG_SYS_CPUSPEED 0x161 /* set core clock to 400/200/100 MHz */
70a2047f WD	244
	245	#define RTC 1 /* enable 32KHz osc */
	246
b03d92e5 JCPV	247	#ifdef CONFIG_MMC
	248	#define CONFIG_PXA_MMC
	249	#define CONFIG_CMD_MMC
6d0f6bcf	250	#define CONFIG_SYS_MMC_BASE 0xF0000000
b03d92e5	251	#endif
70a2047f	252
70a2047f WD	253	/*
	254	* Physical Memory Map
	255	*/
65bd6a90	256	#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */
70a2047f WD	257	#define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */
	258	#define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */
	259	#define PHYS_SDRAM_2 0xa4000000 /* SDRAM Bank #2 */
	260	#define PHYS_SDRAM_2_SIZE 0x00000000 /* 0 MB */
	261	#define PHYS_SDRAM_3 0xa8000000 /* SDRAM Bank #3 */
	262	#define PHYS_SDRAM_3_SIZE 0x00000000 /* 0 MB */
	263	#define PHYS_SDRAM_4 0xac000000 /* SDRAM Bank #4 */
	264	#define PHYS_SDRAM_4_SIZE 0x00000000 /* 0 MB */
	265
	266	#define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */
	267	#define PHYS_FLASH_2 0x04000000 /* Flash Bank #2 */
	268	#define PHYS_FLASH_SIZE 0x02000000 /* 32 MB */
	269	#define PHYS_FLASH_BANK_SIZE 0x02000000 /* 32 MB Banks */
	270	#define PHYS_FLASH_SECT_SIZE 0x00040000 /* 256 KB sectors (x2) */
	271
6d0f6bcf JCPV	272	#define CONFIG_SYS_DRAM_BASE 0xa0000000
6d0f6bcf JCPV	273	#define CONFIG_SYS_DRAM_SIZE 0x04000000
70a2047f	274
6d0f6bcf	275	#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
70a2047f	276
6ef6eb91	277	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
00d5ec93	278	#define CONFIG_SYS_INIT_SP_ADDR 0xfffff800
6ef6eb91	279
70a2047f WD	280	/*
	281	* GPIO settings
	282	*/
	283
6d0f6bcf JCPV	284	#define CONFIG_SYS_GAFR0_L_VAL 0x80001005
	285	#define CONFIG_SYS_GAFR0_U_VAL 0xa5128012
	286	#define CONFIG_SYS_GAFR1_L_VAL 0x699a9558
	287	#define CONFIG_SYS_GAFR1_U_VAL 0xaaa5aa6a
	288	#define CONFIG_SYS_GAFR2_L_VAL 0xaaaaaaaa
	289	#define CONFIG_SYS_GAFR2_U_VAL 0x2
	290	#define CONFIG_SYS_GPCR0_VAL 0x1800400
	291	#define CONFIG_SYS_GPCR1_VAL 0x0
	292	#define CONFIG_SYS_GPCR2_VAL 0x0
	293	#define CONFIG_SYS_GPDR0_VAL 0xc1818440
	294	#define CONFIG_SYS_GPDR1_VAL 0xfcffab82
	295	#define CONFIG_SYS_GPDR2_VAL 0x1ffff
	296	#define CONFIG_SYS_GPSR0_VAL 0x8000
	297	#define CONFIG_SYS_GPSR1_VAL 0x3f0002
	298	#define CONFIG_SYS_GPSR2_VAL 0x1c000
	299
	300	#define CONFIG_SYS_PSSR_VAL 0x20
70a2047f	301
65bd6a90 MV	302	#define CONFIG_SYS_CCCR CCCR_L27\|CCCR_M2\|CCCR_N10
	303	#define CONFIG_SYS_CKEN 0x0
	304
70a2047f WD	305	/*
	306	* Memory settings
	307	*/
6d0f6bcf JCPV	308	#define CONFIG_SYS_MSC0_VAL 0x29DCA4D2
	309	#define CONFIG_SYS_MSC1_VAL 0x43AC494C
	310	#define CONFIG_SYS_MSC2_VAL 0x39D449D4
	311	#define CONFIG_SYS_MDCNFG_VAL 0x090009C9
	312	#define CONFIG_SYS_MDREFR_VAL 0x0085C017
	313	#define CONFIG_SYS_MDMRS_VAL 0x00220022
65bd6a90 MV	314	#define CONFIG_SYS_FLYCNFG_VAL 0x00000000
65bd6a90 MV	315	#define CONFIG_SYS_SXCNFG_VAL 0x00000000
70a2047f WD	316
	317	/*
	318	* PCMCIA and CF Interfaces
	319	*/
6d0f6bcf JCPV	320	#define CONFIG_SYS_MECR_VAL 0x00000003
	321	#define CONFIG_SYS_MCMEM0_VAL 0x00014405
	322	#define CONFIG_SYS_MCMEM1_VAL 0x00014405
	323	#define CONFIG_SYS_MCATT0_VAL 0x00014405
	324	#define CONFIG_SYS_MCATT1_VAL 0x00014405
	325	#define CONFIG_SYS_MCIO0_VAL 0x00014405
	326	#define CONFIG_SYS_MCIO1_VAL 0x00014405
70a2047f WD	327
	328	/*
	329	* FLASH and environment organization
	330	*/
6d0f6bcf	331	#define CONFIG_SYS_FLASH_CFI
00b1883a	332	#define CONFIG_FLASH_CFI_DRIVER 1
70a2047f	333
6d0f6bcf JCPV	334	#define CONFIG_SYS_MONITOR_BASE 0
6d0f6bcf JCPV	335	#define CONFIG_SYS_MONITOR_LEN PHYS_FLASH_SECT_SIZE
70a2047f	336
6d0f6bcf JCPV	337	#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
6d0f6bcf JCPV	338	#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max number of sectors on one chip */
70a2047f	339
6d0f6bcf	340	#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1
70a2047f WD	341
70a2047f WD	342	/* timeout values are in ticks */
6d0f6bcf JCPV	343	#define CONFIG_SYS_FLASH_ERASE_TOUT (25CONFIG_SYS_HZ) / Timeout for Flash Erase */
6d0f6bcf JCPV	344	#define CONFIG_SYS_FLASH_WRITE_TOUT (25CONFIG_SYS_HZ) / Timeout for Flash Write */
70a2047f WD	345
70a2047f WD	346	/* put cfg at end of flash for now */
5a1aceb0	347	#define CONFIG_ENV_IS_IN_FLASH 1
70a2047f	348	/* Addr of Environment Sector */
0e8d1586 JCPV	349	#define CONFIG_ENV_ADDR (PHYS_FLASH_1 + PHYS_FLASH_SIZE - 0x40000)
	350	#define CONFIG_ENV_SIZE PHYS_FLASH_SECT_SIZE /* Total Size of Environment Sector */
	351	#define CONFIG_ENV_SECT_SIZE (PHYS_FLASH_SECT_SIZE / 16)
70a2047f WD	352
70a2047f WD	353	#endif /* __CONFIG_H */