[people/ms/u-boot.git] / include / configs / qemu-ppce500.h

/*
 * Copyright 2011-2014 Freescale Semiconductor, Inc.
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

/*
 * Corenet DS style board configuration file
 */
#ifndef __QEMU_PPCE500_H
#define __QEMU_PPCE500_H

#define CONFIG_CMD_REGINFO

/* High Level Configuration Options */
#define CONFIG_BOOKE
#define CONFIG_E500			/* BOOKE e500 family */
#define CONFIG_QEMU_E500

#undef CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_TEXT_BASE	0xf01000 /* 15 MB */

#define CONFIG_SYS_MPC85XX_NO_RESETVEC

#define CONFIG_SYS_RAMBOOT

#define CONFIG_PCI			/* Enable PCI/PCIE */
#define CONFIG_PCI1		1	/* PCI controller 1 */
#define CONFIG_FSL_PCI_INIT		/* Use common FSL init code */
#define CONFIG_SYS_PCI_64BIT		/* enable 64-bit PCI resources */

#define CONFIG_ENV_OVERWRITE

#define CONFIG_ENABLE_36BIT_PHYS

#define CONFIG_ADDR_MAP
#define CONFIG_SYS_NUM_ADDR_MAP		16	/* number of TLB1 entries */

#define CONFIG_SYS_MEMTEST_START	0x00200000	/* memtest works on */
#define CONFIG_SYS_MEMTEST_END		0x00400000
#define CONFIG_SYS_ALT_MEMTEST
#define CONFIG_PANIC_HANG	/* do not reset board on panic */

/* Needed to fill the ccsrbar pointer */
#define CONFIG_BOARD_EARLY_INIT_F

/* Virtual address to CCSRBAR */
#define CONFIG_SYS_CCSRBAR		0xe0000000
/* Physical address should be a function call */
#ifndef __ASSEMBLY__
extern unsigned long long get_phys_ccsrbar_addr_early(void);
#endif
#define CONFIG_SYS_CCSR_DO_NOT_RELOCATE

/* Virtual address range for PCI region maps */
#define CONFIG_SYS_PCI_MAP_START	0x80000000
#define CONFIG_SYS_PCI_MAP_END		0xe8000000

/* Virtual address to a temporary map if we need it (max 128MB) */
#define CONFIG_SYS_TMPVIRT		0xe8000000

/*
 * DDR Setup
 */
#define CONFIG_VERY_BIG_RAM
#define CONFIG_SYS_DDR_SDRAM_BASE	0x00000000
#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE

#define CONFIG_CHIP_SELECTS_PER_CTRL	0

#define CONFIG_SYS_CLK_FREQ        33000000

#define CONFIG_SYS_NO_FLASH

#define CONFIG_SYS_BOOT_BLOCK		0x00000000	/* boot TLB */

#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_TEXT_BASE

#define CONFIG_ENV_IS_NOWHERE

#define CONFIG_HWCONFIG

#define CONFIG_SYS_INIT_RAM_ADDR		0x00100000
#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH	0x0
#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW	0x00100000
/* The assembler doesn't like typecast */
#define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
	((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \
	  CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
#define CONFIG_SYS_INIT_RAM_SIZE		0x00004000

#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - \
					GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET

#define CONFIG_SYS_MONITOR_LEN		(512 * 1024)
#define CONFIG_SYS_MALLOC_LEN		(4 * 1024 * 1024)

#define CONFIG_CONS_INDEX	1
#define CONFIG_SYS_NS16550
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE	1
#define CONFIG_SYS_NS16550_CLK		(get_bus_freq(0))

#define CONFIG_SYS_BAUDRATE_TABLE	\
	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}

#define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_CCSRBAR+0x4500)
#define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_CCSRBAR+0x4600)

/* Use the HUSH parser */
#define CONFIG_SYS_HUSH_PARSER
#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "

/* pass open firmware flat tree */
#define CONFIG_OF_LIBFDT
#define CONFIG_OF_BOARD_SETUP
#define CONFIG_OF_STDOUT_VIA_ALIAS

/* new uImage format support */
#define CONFIG_FIT
#define CONFIG_FIT_VERBOSE	/* enable fit_format_{error,warning}() */

/*
 * General PCI
 * Memory space is mapped 1-1, but I/O space must start from 0.
 */

#ifdef CONFIG_PCI
#define CONFIG_PCI_INDIRECT_BRIDGE
#define CONFIG_NET_MULTI
#define CONFIG_PCI_PNP			/* do pci plug-and-play */
#define CONFIG_E1000

#define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
#define CONFIG_DOS_PARTITION
#endif	/* CONFIG_PCI */

#define CONFIG_LBA48
#define CONFIG_DOS_PARTITION
#define CONFIG_CMD_EXT2

/*
 * Environment
 */
#define CONFIG_ENV_SIZE		0x2000

#define CONFIG_LOADS_ECHO		/* echo on for serial download */

#define CONFIG_LAST_STAGE_INIT

/*
 * Command line configuration.
 */
#include <config_cmd_default.h>

#define CONFIG_CMD_DHCP
#define CONFIG_CMD_ELF
#define CONFIG_CMD_BOOTZ
#define CONFIG_CMD_GREPENV
#define CONFIG_CMD_IRQ
#define CONFIG_CMD_PING
#define CONFIG_CMD_SETEXPR

#ifdef CONFIG_PCI
#define CONFIG_CMD_PCI
#define CONFIG_CMD_NET
#endif

/*
 * Miscellaneous configurable options
 */
#define CONFIG_SYS_LONGHELP			/* undef to save memory	*/
#define CONFIG_CMDLINE_EDITING			/* Command-line editing */
#define CONFIG_AUTO_COMPLETE			/* add autocompletion support */
#define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size */
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
#define CONFIG_SYS_MAXARGS	16		/* max number of command args */
#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */

/*
 * For booting Linux, the board info and command line data
 * have to be in the first 64 MB of memory, since this is
 * the maximum mapped by the Linux kernel during initialization.
 */
#define CONFIG_SYS_BOOTMAPSZ	(64 << 20)	/* Initial map for Linux*/
#define CONFIG_SYS_BOOTM_LEN	(64 << 20)	/* Increase max gunzip size */

/*
 * Environment Configuration
 */
#define CONFIG_ROOTPATH		"/opt/nfsroot"
#define CONFIG_BOOTFILE		"uImage"
#define CONFIG_UBOOTPATH	"u-boot.bin"	/* U-Boot image on TFTP server*/

/* default location for tftp and bootm */
#define CONFIG_LOADADDR		1000000

#define CONFIG_BAUDRATE	115200

#define CONFIG_BOOTDELAY        1
#define CONFIG_BOOTCOMMAND		\
	"test -n \"$qemu_kernel_addr\" && bootm $qemu_kernel_addr - $fdt_addr_r\0"

#endif	/* __QEMU_PPCE500_H */
Commit	Line	Data
fa08d395 AG	1	/*
	2	* Copyright 2011-2014 Freescale Semiconductor, Inc.
	3	*
	4	* SPDX-License-Identifier: GPL-2.0+
	5	*/
	6
	7	/*
	8	* Corenet DS style board configuration file
	9	*/
	10	#ifndef __QEMU_PPCE500_H
	11	#define __QEMU_PPCE500_H
	12
	13	#define CONFIG_CMD_REGINFO
	14
	15	/* High Level Configuration Options */
	16	#define CONFIG_BOOKE
	17	#define CONFIG_E500 /* BOOKE e500 family */
	18	#define CONFIG_QEMU_E500
	19
	20	#undef CONFIG_SYS_TEXT_BASE
	21	#define CONFIG_SYS_TEXT_BASE 0xf01000 /* 15 MB */
	22
	23	#define CONFIG_SYS_MPC85XX_NO_RESETVEC
	24
	25	#define CONFIG_SYS_RAMBOOT
	26
	27	#define CONFIG_PCI /* Enable PCI/PCIE */
	28	#define CONFIG_PCI1 1 /* PCI controller 1 */
	29	#define CONFIG_FSL_PCI_INIT /* Use common FSL init code */
	30	#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */
	31
	32	#define CONFIG_ENV_OVERWRITE
	33
	34	#define CONFIG_ENABLE_36BIT_PHYS
	35
	36	#define CONFIG_ADDR_MAP
	37	#define CONFIG_SYS_NUM_ADDR_MAP 16 /* number of TLB1 entries */
	38
	39	#define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */
	40	#define CONFIG_SYS_MEMTEST_END 0x00400000
	41	#define CONFIG_SYS_ALT_MEMTEST
	42	#define CONFIG_PANIC_HANG /* do not reset board on panic */
	43
	44	/* Needed to fill the ccsrbar pointer */
	45	#define CONFIG_BOARD_EARLY_INIT_F
	46
	47	/* Virtual address to CCSRBAR */
	48	#define CONFIG_SYS_CCSRBAR 0xe0000000
	49	/* Physical address should be a function call */
	50	#ifndef __ASSEMBLY__
	51	extern unsigned long long get_phys_ccsrbar_addr_early(void);
	52	#endif
	53	#define CONFIG_SYS_CCSR_DO_NOT_RELOCATE
	54
	55	/* Virtual address range for PCI region maps */
	56	#define CONFIG_SYS_PCI_MAP_START 0x80000000
	57	#define CONFIG_SYS_PCI_MAP_END 0xe8000000
	58
	59	/* Virtual address to a temporary map if we need it (max 128MB) */
	60	#define CONFIG_SYS_TMPVIRT 0xe8000000
	61
	62	/*
	63	* DDR Setup
	64	*/
65	#define CONFIG_VERY_BIG_RAM
66	#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000
67	#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
68
69	#define CONFIG_CHIP_SELECTS_PER_CTRL 0
70
71	#define CONFIG_SYS_CLK_FREQ 33000000
72
73	#define CONFIG_SYS_NO_FLASH
74
75	#define CONFIG_SYS_BOOT_BLOCK 0x00000000 /* boot TLB */
76
77	#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
78
79	#define CONFIG_ENV_IS_NOWHERE
80
81	#define CONFIG_HWCONFIG
82
83	#define CONFIG_SYS_INIT_RAM_ADDR 0x00100000
84	#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0x0
85	#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW 0x00100000
86	/* The assembler doesn't like typecast */
87	#define CONFIG_SYS_INIT_RAM_ADDR_PHYS \
88	((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) \| \
89	CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW)
90	#define CONFIG_SYS_INIT_RAM_SIZE 0x00004000
91
92	#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \
93	GENERATED_GBL_DATA_SIZE)
94	#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
95
96	#define CONFIG_SYS_MONITOR_LEN (512 * 1024)
97	#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024)
98
99	#define CONFIG_CONS_INDEX 1
100	#define CONFIG_SYS_NS16550
101	#define CONFIG_SYS_NS16550_SERIAL
102	#define CONFIG_SYS_NS16550_REG_SIZE 1
103	#define CONFIG_SYS_NS16550_CLK (get_bus_freq(0))
104
105	#define CONFIG_SYS_BAUDRATE_TABLE \
106	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
107
108	#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500)
109	#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600)
110
111	/* Use the HUSH parser */
112	#define CONFIG_SYS_HUSH_PARSER
113	#define CONFIG_SYS_PROMPT_HUSH_PS2 "> "
114
115	/* pass open firmware flat tree */
116	#define CONFIG_OF_LIBFDT
117	#define CONFIG_OF_BOARD_SETUP
118	#define CONFIG_OF_STDOUT_VIA_ALIAS
119
120	/* new uImage format support */
121	#define CONFIG_FIT
122	#define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */
123
124	/*
125	* General PCI
126	* Memory space is mapped 1-1, but I/O space must start from 0.
127	*/
128
129	#ifdef CONFIG_PCI
130	#define CONFIG_PCI_INDIRECT_BRIDGE
131	#define CONFIG_NET_MULTI
132	#define CONFIG_PCI_PNP /* do pci plug-and-play */
133	#define CONFIG_E1000
134
135	#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
136	#define CONFIG_DOS_PARTITION
137	#endif /* CONFIG_PCI */
138
139	#define CONFIG_LBA48
140	#define CONFIG_DOS_PARTITION
141	#define CONFIG_CMD_EXT2
142
143	/*
144	* Environment
145	*/
146	#define CONFIG_ENV_SIZE 0x2000
147
148	#define CONFIG_LOADS_ECHO /* echo on for serial download */
149
150	#define CONFIG_LAST_STAGE_INIT
151
152	/*
153	* Command line configuration.
154	*/
155	#include <config_cmd_default.h>
156
157	#define CONFIG_CMD_DHCP
158	#define CONFIG_CMD_ELF
159	#define CONFIG_CMD_BOOTZ
160	#define CONFIG_CMD_GREPENV
161	#define CONFIG_CMD_IRQ
162	#define CONFIG_CMD_PING
163	#define CONFIG_CMD_SETEXPR
164
165	#ifdef CONFIG_PCI
166	#define CONFIG_CMD_PCI
167	#define CONFIG_CMD_NET
168	#endif
169
170	/*
171	* Miscellaneous configurable options
172	*/
173	#define CONFIG_SYS_LONGHELP /* undef to save memory */
174	#define CONFIG_CMDLINE_EDITING /* Command-line editing */
175	#define CONFIG_AUTO_COMPLETE /* add autocompletion support */
176	#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
177	#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
178	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
179	#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
180	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */
181
182	/*
183	* For booting Linux, the board info and command line data
184	* have to be in the first 64 MB of memory, since this is
185	* the maximum mapped by the Linux kernel during initialization.
186	*/
187	#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial map for Linux*/
188	#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */
189
190	/*
191	* Environment Configuration
192	*/
193	#define CONFIG_ROOTPATH "/opt/nfsroot"
194	#define CONFIG_BOOTFILE "uImage"
195	#define CONFIG_UBOOTPATH "u-boot.bin" /* U-Boot image on TFTP server*/
196
197	/* default location for tftp and bootm */
198	#define CONFIG_LOADADDR 1000000
199
200	#define CONFIG_BAUDRATE 115200
201
202	#define CONFIG_BOOTDELAY 1
203	#define CONFIG_BOOTCOMMAND \
204	"test -n \"$qemu_kernel_addr\" && bootm $qemu_kernel_addr - $fdt_addr_r\0"
205
206	#endif /* __QEMU_PPCE500_H */