[people/ms/u-boot.git] / include / configs / rastaban.h

/*
 * (C) Copyright 2013 Siemens Schweiz AG
 * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
 *
 * Based on:
 * U-Boot file:/include/configs/am335x_evm.h
 *
 * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __CONFIG_RASTABAN_H
#define __CONFIG_RASTABAN_H

#include "siemens-am33x-common.h"

#define CONFIG_SYS_MPUCLK	300
#define DDR_PLL_FREQ	303
#undef CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC

/* FWD Button = 27
 * SRV Button = 87 */
#define BOARD_DFU_BUTTON_GPIO	27
#define GPIO_LAN9303_NRST	88	/* GPIO2_24 = gpio88 */
/* In dfu mode keep led1 on */
#define CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \
	"button_dfu0=27\0" \
	"button_dfu1=87\0" \
	"led0=3,0,1\0" \
	"led1=4,0,0\0" \
	"led2=5,0,1\0" \
	"led3=62,0,1\0" \
	"led4=60,0,1\0" \
	"led5=63,0,1\0"

#undef CONFIG_DOS_PARTITION

#define CONFIG_BOARD_LATE_INIT

 /* Physical Memory Map */
#define CONFIG_MAX_RAM_BANK_SIZE	(1024 << 20)	/* 1GB */

/* I2C Configuration */
#define CONFIG_SYS_I2C_SPEED		100000

#define CONFIG_SYS_I2C_EEPROM_ADDR              0x50
#define EEPROM_ADDR_DDR3 0x90
#define EEPROM_ADDR_CHIP 0x120

#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS	0x300

#undef CONFIG_MII
#undef CONFIG_PHY_GIGE
#define CONFIG_PHY_SMSC

#define CONFIG_FACTORYSET

/* Watchdog */
#define CONFIG_OMAP_WATCHDOG

/* Define own nand partitions */
#define CONFIG_ENV_OFFSET_REDUND	0x2E0000
#define CONFIG_ENV_SIZE_REDUND		0x2000
#define CONFIG_ENV_RANGE		(4 * CONFIG_SYS_ENV_SECT_SIZE)

#define MTDPARTS_DEFAULT	MTDPARTS_DEFAULT_V3

#ifndef CONFIG_SPL_BUILD

/* Default env settings */
#define CONFIG_EXTRA_ENV_SETTINGS \
	"hostname=rastaban\0" \
	"ubi_off=2048\0"\
	"nand_img_size=0x400000\0" \
	"optargs=\0" \
	"preboot=draco_led 0\0" \
	CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \
	CONFIG_ENV_SETTINGS_V2 \
	CONFIG_ENV_SETTINGS_NAND_V2

#ifndef CONFIG_RESTORE_FLASH
/* set to negative value for no autoboot */

#define CONFIG_BOOTCOMMAND \
"if dfubutton; then " \
	"run dfu_start; " \
	"reset; " \
"fi;" \
"run nand_boot;" \
"run nand_boot_backup;" \
"reset;"

#else

#define CONFIG_BOOTCOMMAND			\
	"setenv autoload no; "			\
	"dhcp; "				\
	"if tftp 80000000 debrick.scr; then "	\
		"source 80000000; "		\
	"fi"
#endif
#endif	/* CONFIG_SPL_BUILD */
#endif	/* ! __CONFIG_RASTABAN_H */
Commit	Line	Data
578056c3 HS	1	/*
	2	* (C) Copyright 2013 Siemens Schweiz AG
	3	* (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
	4	*
	5	* Based on:
	6	* U-Boot file:/include/configs/am335x_evm.h
	7	*
	8	* Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
	9	*
	10	* SPDX-License-Identifier: GPL-2.0+
	11	*/
	12
	13	#ifndef __CONFIG_RASTABAN_H
	14	#define __CONFIG_RASTABAN_H
	15
	16	#include "siemens-am33x-common.h"
	17
578056c3 HS	18	#define CONFIG_SYS_MPUCLK 300
	19	#define DDR_PLL_FREQ 303
	20	#undef CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC
	21
	22	/* FWD Button = 27
	23	* SRV Button = 87 */
	24	#define BOARD_DFU_BUTTON_GPIO 27
	25	#define GPIO_LAN9303_NRST 88 /* GPIO2_24 = gpio88 */
	26	/* In dfu mode keep led1 on */
	27	#define CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \
	28	"button_dfu0=27\0" \
	29	"button_dfu1=87\0" \
	30	"led0=3,0,1\0" \
	31	"led1=4,0,0\0" \
	32	"led2=5,0,1\0" \
	33	"led3=62,0,1\0" \
	34	"led4=60,0,1\0" \
	35	"led5=63,0,1\0"
	36
	37	#undef CONFIG_DOS_PARTITION
578056c3 HS	38
	39	#define CONFIG_BOARD_LATE_INIT
	40
	41	/* Physical Memory Map */
	42	#define CONFIG_MAX_RAM_BANK_SIZE (1024 << 20) /* 1GB */
	43
	44	/* I2C Configuration */
	45	#define CONFIG_SYS_I2C_SPEED 100000
	46
	47	#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
	48	#define EEPROM_ADDR_DDR3 0x90
	49	#define EEPROM_ADDR_CHIP 0x120
	50
	51	#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x300
	52
578056c3 HS	53	#undef CONFIG_MII
	54	#undef CONFIG_PHY_GIGE
	55	#define CONFIG_PHY_SMSC
	56
	57	#define CONFIG_FACTORYSET
	58
	59	/* Watchdog */
	60	#define CONFIG_OMAP_WATCHDOG
	61
	62	/* Define own nand partitions */
	63	#define CONFIG_ENV_OFFSET_REDUND 0x2E0000
	64	#define CONFIG_ENV_SIZE_REDUND 0x2000
	65	#define CONFIG_ENV_RANGE (4 * CONFIG_SYS_ENV_SECT_SIZE)
	66
578056c3 HS	67	#define MTDPARTS_DEFAULT MTDPARTS_DEFAULT_V3
	68
	69	#ifndef CONFIG_SPL_BUILD
	70
	71	/* Default env settings */
	72	#define CONFIG_EXTRA_ENV_SETTINGS \
	73	"hostname=rastaban\0" \
6b3943f1	74	"ubi_off=2048\0"\
578056c3 HS	75	"nand_img_size=0x400000\0" \
	76	"optargs=\0" \
	77	"preboot=draco_led 0\0" \
	78	CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \
	79	CONFIG_ENV_SETTINGS_V2 \
	80	CONFIG_ENV_SETTINGS_NAND_V2
	81
	82	#ifndef CONFIG_RESTORE_FLASH
	83	/* set to negative value for no autoboot */
578056c3 HS	84
	85	#define CONFIG_BOOTCOMMAND \
	86	"if dfubutton; then " \
	87	"run dfu_start; " \
	88	"reset; " \
	89	"fi;" \
	90	"run nand_boot;" \
	91	"run nand_boot_backup;" \
	92	"reset;"
	93
578056c3	94	#else
578056c3 HS	95
	96	#define CONFIG_BOOTCOMMAND \
	97	"setenv autoload no; " \
	98	"dhcp; " \
	99	"if tftp 80000000 debrick.scr; then " \
	100	"source 80000000; " \
	101	"fi"
	102	#endif
	103	#endif /* CONFIG_SPL_BUILD */
	104	#endif /* ! __CONFIG_RASTABAN_H */