]>
Commit | Line | Data |
---|---|---|
83d290c5 | 1 | /* SPDX-License-Identifier: GPL-2.0+ */ |
578056c3 HS |
2 | /* |
3 | * (C) Copyright 2013 Siemens Schweiz AG | |
4 | * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de. | |
5 | * | |
6 | * Based on: | |
7 | * U-Boot file:/include/configs/am335x_evm.h | |
8 | * | |
9 | * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ | |
578056c3 HS |
10 | */ |
11 | ||
12 | #ifndef __CONFIG_RASTABAN_H | |
13 | #define __CONFIG_RASTABAN_H | |
14 | ||
15 | #include "siemens-am33x-common.h" | |
16 | ||
578056c3 | 17 | #define DDR_PLL_FREQ 303 |
578056c3 HS |
18 | |
19 | /* FWD Button = 27 | |
20 | * SRV Button = 87 */ | |
21 | #define BOARD_DFU_BUTTON_GPIO 27 | |
22 | #define GPIO_LAN9303_NRST 88 /* GPIO2_24 = gpio88 */ | |
23 | /* In dfu mode keep led1 on */ | |
24 | #define CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \ | |
25 | "button_dfu0=27\0" \ | |
26 | "button_dfu1=87\0" \ | |
27 | "led0=3,0,1\0" \ | |
28 | "led1=4,0,0\0" \ | |
29 | "led2=5,0,1\0" \ | |
30 | "led3=62,0,1\0" \ | |
31 | "led4=60,0,1\0" \ | |
32 | "led5=63,0,1\0" | |
33 | ||
578056c3 HS |
34 | /* Physical Memory Map */ |
35 | #define CONFIG_MAX_RAM_BANK_SIZE (1024 << 20) /* 1GB */ | |
36 | ||
37 | /* I2C Configuration */ | |
38 | #define CONFIG_SYS_I2C_SPEED 100000 | |
39 | ||
40 | #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 | |
41 | #define EEPROM_ADDR_DDR3 0x90 | |
42 | #define EEPROM_ADDR_CHIP 0x120 | |
43 | ||
578056c3 HS |
44 | #define CONFIG_PHY_SMSC |
45 | ||
46 | #define CONFIG_FACTORYSET | |
47 | ||
578056c3 HS |
48 | /* Define own nand partitions */ |
49 | #define CONFIG_ENV_OFFSET_REDUND 0x2E0000 | |
50 | #define CONFIG_ENV_SIZE_REDUND 0x2000 | |
51 | #define CONFIG_ENV_RANGE (4 * CONFIG_SYS_ENV_SECT_SIZE) | |
52 | ||
578056c3 HS |
53 | #ifndef CONFIG_SPL_BUILD |
54 | ||
55 | /* Default env settings */ | |
56 | #define CONFIG_EXTRA_ENV_SETTINGS \ | |
57 | "hostname=rastaban\0" \ | |
6b3943f1 | 58 | "ubi_off=2048\0"\ |
578056c3 HS |
59 | "nand_img_size=0x400000\0" \ |
60 | "optargs=\0" \ | |
61 | "preboot=draco_led 0\0" \ | |
62 | CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \ | |
63 | CONFIG_ENV_SETTINGS_V2 \ | |
64 | CONFIG_ENV_SETTINGS_NAND_V2 | |
65 | ||
66 | #ifndef CONFIG_RESTORE_FLASH | |
67 | /* set to negative value for no autoboot */ | |
578056c3 HS |
68 | |
69 | #define CONFIG_BOOTCOMMAND \ | |
70 | "if dfubutton; then " \ | |
71 | "run dfu_start; " \ | |
72 | "reset; " \ | |
73 | "fi;" \ | |
74 | "run nand_boot;" \ | |
75 | "run nand_boot_backup;" \ | |
76 | "reset;" | |
77 | ||
578056c3 | 78 | #else |
578056c3 HS |
79 | |
80 | #define CONFIG_BOOTCOMMAND \ | |
81 | "setenv autoload no; " \ | |
82 | "dhcp; " \ | |
83 | "if tftp 80000000 debrick.scr; then " \ | |
84 | "source 80000000; " \ | |
85 | "fi" | |
86 | #endif | |
87 | #endif /* CONFIG_SPL_BUILD */ | |
88 | #endif /* ! __CONFIG_RASTABAN_H */ |