]> git.ipfire.org Git - people/ms/u-boot.git/blame - include/configs/sama5d2_ptc.h
Merge branch 'master' of git://www.denx.de/git/u-boot-imx
[people/ms/u-boot.git] / include / configs / sama5d2_ptc.h
CommitLineData
9989c156
WY
1/*
2 * Configuration settings for the SAMA5D2 PTC Engineering board.
3 *
4 * Copyright (C) 2016 Atmel
5 * Wenyou Yang <wenyou.yang@atmel.com>
6 *
7 * SPDX-License-Identifier: GPL-2.0+
8 */
9
10#ifndef __CONFIG_H
11#define __CONFIG_H
12
9989c156
WY
13#include "at91-sama5_common.h"
14
15/* serial console */
16#define CONFIG_ATMEL_USART
e61ed48f
WY
17#define CONFIG_USART_BASE 0xf801c000
18#define CONFIG_USART_ID 24
9989c156 19
e61ed48f 20#define CONFIG_SYS_SDRAM_BASE 0x20000000
9989c156
WY
21#define CONFIG_SYS_SDRAM_SIZE 0x20000000
22
e61ed48f
WY
23#define CONFIG_SYS_TIMER_COUNTER 0xf804803c
24
9989c156
WY
25#ifdef CONFIG_SPL_BUILD
26#define CONFIG_SYS_INIT_SP_ADDR 0x210000
27#else
28#define CONFIG_SYS_INIT_SP_ADDR \
29 (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
30#endif
31
32#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
33
34#undef CONFIG_AT91_GPIO
35#define CONFIG_ATMEL_PIO4
36
37/* SDRAM */
38#define CONFIG_NR_DRAM_BANKS 1
39
40/* SerialFlash */
41#ifdef CONFIG_CMD_SF
42#define CONFIG_ATMEL_SPI
43#define CONFIG_SPI_FLASH_ATMEL
44#define CONFIG_SF_DEFAULT_BUS 0
45#define CONFIG_SF_DEFAULT_CS 0
46#define CONFIG_SF_DEFAULT_SPEED 30000000
47#endif
48
49/* NAND flash */
9989c156
WY
50#ifdef CONFIG_CMD_NAND
51#define CONFIG_NAND_ATMEL
52#define CONFIG_SYS_MAX_NAND_DEVICE 1
e61ed48f 53#define CONFIG_SYS_NAND_BASE 0x80000000
9989c156
WY
54/* our ALE is AD21 */
55#define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
56/* our CLE is AD22 */
57#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
58#define CONFIG_SYS_NAND_ONFI_DETECTION
59/* PMECC & PMERRLOC */
60#define CONFIG_ATMEL_NAND_HWECC
61#define CONFIG_ATMEL_NAND_HW_PMECC
9989c156
WY
62#endif
63
9989c156 64/* USB device */
9989c156 65
9989c156
WY
66/* Ethernet Hardware */
67#define CONFIG_MACB
68#define CONFIG_RMII
69#define CONFIG_NET_RETRY_COUNT 20
70#define CONFIG_MACB_SEARCH_PHY
71
5541543f 72#ifdef CONFIG_NAND_BOOT
9989c156
WY
73#undef CONFIG_ENV_OFFSET
74#undef CONFIG_ENV_OFFSET_REDUND
75#undef CONFIG_BOOTCOMMAND
76/* u-boot env in nand flash */
9989c156
WY
77#define CONFIG_ENV_OFFSET 0x200000
78#define CONFIG_ENV_OFFSET_REDUND 0x400000
79#define CONFIG_BOOTCOMMAND "nand read 0x21000000 0xb80000 0x80000;" \
80 "nand read 0x22000000 0x600000 0x600000;" \
81 "bootz 0x22000000 - 0x21000000"
82#endif
83
9989c156
WY
84/* SPL */
85#define CONFIG_SPL_FRAMEWORK
86#define CONFIG_SPL_TEXT_BASE 0x200000
87#define CONFIG_SPL_MAX_SIZE 0x10000
88#define CONFIG_SPL_BSS_START_ADDR 0x20000000
89#define CONFIG_SPL_BSS_MAX_SIZE 0x80000
90#define CONFIG_SYS_SPL_MALLOC_START 0x20080000
91#define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000
92
9989c156
WY
93#define CONFIG_SYS_MONITOR_LEN (512 << 10)
94
5541543f 95#ifdef CONFIG_SPI_BOOT
9989c156
WY
96#define CONFIG_SPL_SPI_LOAD
97#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x8000
98
5541543f 99#elif CONFIG_NAND_BOOT
9989c156
WY
100#define CONFIG_SPL_NAND_DRIVERS
101#define CONFIG_SPL_NAND_BASE
5541543f 102#endif
9989c156
WY
103#define CONFIG_PMECC_CAP 8
104#define CONFIG_PMECC_SECTOR_SIZE 512
105#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x40000
106#define CONFIG_SYS_NAND_5_ADDR_CYCLE
107#define CONFIG_SYS_NAND_PAGE_SIZE 0x1000
108#define CONFIG_SYS_NAND_PAGE_COUNT 64
109#define CONFIG_SYS_NAND_OOBSIZE 224
110#define CONFIG_SYS_NAND_BLOCK_SIZE 0x40000
111#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0x0
112#define CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER
9989c156
WY
113
114#endif