]> git.ipfire.org Git - people/ms/u-boot.git/blame - include/configs/sama5d4_xplained.h
stm32f7: use stm32f7 gpio driver supporting driver model
[people/ms/u-boot.git] / include / configs / sama5d4_xplained.h
CommitLineData
f196044d
BS
1/*
2 * Configuration settings for the SAMA5D4 Xplained ultra board.
3 *
4 * Copyright (C) 2014 Atmel
5 * Bo Shen <voice.shen@atmel.com>
6 *
7 * SPDX-License-Identifier: GPL-2.0+
8 */
9
10#ifndef __CONFIG_H
11#define __CONFIG_H
12
b2d387bc 13#include "at91-sama5_common.h"
f196044d 14
f196044d
BS
15/* SDRAM */
16#define CONFIG_NR_DRAM_BANKS 1
17#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_DDRCS
18#define CONFIG_SYS_SDRAM_SIZE 0x20000000
19
0b2a9824 20#ifdef CONFIG_SPL_BUILD
6dbadb4d 21#define CONFIG_SYS_INIT_SP_ADDR 0x218000
0b2a9824 22#else
f196044d 23#define CONFIG_SYS_INIT_SP_ADDR \
6dbadb4d 24 (CONFIG_SYS_SDRAM_BASE + 16 * 1024 - GENERATED_GBL_DATA_SIZE)
0b2a9824 25#endif
f196044d
BS
26
27#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
28
f196044d 29#ifdef CONFIG_CMD_SF
f196044d
BS
30#define CONFIG_SF_DEFAULT_SPEED 30000000
31#endif
32
33/* NAND flash */
34#define CONFIG_CMD_NAND
35
36#ifdef CONFIG_CMD_NAND
37#define CONFIG_NAND_ATMEL
38#define CONFIG_SYS_MAX_NAND_DEVICE 1
39#define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3
40/* our ALE is AD21 */
41#define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
42/* our CLE is AD22 */
43#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
44#define CONFIG_SYS_NAND_ONFI_DETECTION
45/* PMECC & PMERRLOC */
46#define CONFIG_ATMEL_NAND_HWECC
47#define CONFIG_ATMEL_NAND_HW_PMECC
48#endif
49
f196044d 50/* LCD */
f196044d
BS
51#ifdef CONFIG_LCD
52#define LCD_BPP LCD_COLOR16
53#define LCD_OUTPUT_BPP 24
54#define CONFIG_LCD_LOGO
55#define CONFIG_LCD_INFO
56#define CONFIG_LCD_INFO_BELOW_LOGO
f196044d
BS
57#define CONFIG_ATMEL_HLCD
58#define CONFIG_ATMEL_LCD_RGB565
f196044d
BS
59#endif
60
61#ifdef CONFIG_SYS_USE_SERIALFLASH
7a53b954 62/* override the bootcmd, bootargs and other configuration for spi flash env */
f196044d 63#elif CONFIG_SYS_USE_NANDFLASH
dc018fef 64/* override the bootcmd, bootargs and other configuration for nandflash env */
f196044d 65#elif CONFIG_SYS_USE_MMC
372ca03f 66/* override the bootcmd, bootargs and other configuration for sd/mmc env */
f196044d
BS
67#endif
68
0b2a9824
BS
69/* SPL */
70#define CONFIG_SPL_FRAMEWORK
71#define CONFIG_SPL_TEXT_BASE 0x200000
6dbadb4d 72#define CONFIG_SPL_MAX_SIZE 0x18000
0b2a9824
BS
73#define CONFIG_SPL_BSS_START_ADDR 0x20000000
74#define CONFIG_SPL_BSS_MAX_SIZE 0x80000
75#define CONFIG_SYS_SPL_MALLOC_START 0x20080000
76#define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000
77
0b2a9824
BS
78#define CONFIG_SPL_BOARD_INIT
79#define CONFIG_SYS_MONITOR_LEN (512 << 10)
80
81#ifdef CONFIG_SYS_USE_MMC
993ea97e 82#define CONFIG_SPL_LDSCRIPT arch/arm/mach-at91/armv7/u-boot-spl.lds
0b2a9824
BS
83#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
84#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
0b2a9824
BS
85
86#elif CONFIG_SYS_USE_NANDFLASH
0b2a9824
BS
87#define CONFIG_SPL_NAND_DRIVERS
88#define CONFIG_SPL_NAND_BASE
89#define CONFIG_PMECC_CAP 8
90#define CONFIG_PMECC_SECTOR_SIZE 512
91#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x40000
92#define CONFIG_SYS_NAND_5_ADDR_CYCLE
93#define CONFIG_SYS_NAND_PAGE_SIZE 0x1000
94#define CONFIG_SYS_NAND_PAGE_COUNT 64
95#define CONFIG_SYS_NAND_OOBSIZE 224
96#define CONFIG_SYS_NAND_BLOCK_SIZE 0x40000
97#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0x0
98#define CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER
99
100#elif CONFIG_SYS_USE_SERIALFLASH
0b2a9824 101#define CONFIG_SPL_SPI_LOAD
6dbadb4d 102#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x10000
0b2a9824
BS
103
104#endif
f196044d 105#endif