]> git.ipfire.org Git - people/ms/u-boot.git/blame - include/configs/sama5d4ek.h
Convert CONFIG_CMD_SAVES to Kconfig
[people/ms/u-boot.git] / include / configs / sama5d4ek.h
CommitLineData
927b901b
BS
1/*
2 * Configuration settings for the SAMA5D4EK board.
3 *
4 * Copyright (C) 2014 Atmel
5 * Bo Shen <voice.shen@atmel.com>
6 *
7 * SPDX-License-Identifier: GPL-2.0+
8 */
9
10#ifndef __CONFIG_H
11#define __CONFIG_H
12
b2d387bc 13#include "at91-sama5_common.h"
927b901b 14
927b901b
BS
15/* SDRAM */
16#define CONFIG_NR_DRAM_BANKS 1
17#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_DDRCS
18#define CONFIG_SYS_SDRAM_SIZE 0x20000000
19
5a4c9c22 20#ifdef CONFIG_SPL_BUILD
ef33aa3d 21#define CONFIG_SYS_INIT_SP_ADDR 0x218000
5a4c9c22 22#else
927b901b 23#define CONFIG_SYS_INIT_SP_ADDR \
ef33aa3d 24 (CONFIG_SYS_SDRAM_BASE + 16 * 1024 - GENERATED_GBL_DATA_SIZE)
5a4c9c22 25#endif
927b901b
BS
26
27#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
28
927b901b 29#ifdef CONFIG_CMD_SF
927b901b
BS
30#define CONFIG_SF_DEFAULT_SPEED 30000000
31#endif
32
33/* NAND flash */
927b901b
BS
34#ifdef CONFIG_CMD_NAND
35#define CONFIG_NAND_ATMEL
36#define CONFIG_SYS_MAX_NAND_DEVICE 1
37#define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3
38/* our ALE is AD21 */
39#define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
40/* our CLE is AD22 */
41#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
42#define CONFIG_SYS_NAND_ONFI_DETECTION
43/* PMECC & PMERRLOC */
44#define CONFIG_ATMEL_NAND_HWECC
45#define CONFIG_ATMEL_NAND_HW_PMECC
46#endif
47
927b901b 48/* LCD */
927b901b
BS
49#define LCD_BPP LCD_COLOR16
50#define LCD_OUTPUT_BPP 18
51#define CONFIG_LCD_LOGO
52#define CONFIG_LCD_INFO
53#define CONFIG_LCD_INFO_BELOW_LOGO
927b901b
BS
54#define CONFIG_ATMEL_HLCD
55#define CONFIG_ATMEL_LCD_RGB565
927b901b
BS
56
57#ifdef CONFIG_SYS_USE_SERIALFLASH
7a53b954 58/* override the bootcmd, bootargs and other configuration for spi flash env*/
927b901b 59#elif CONFIG_SYS_USE_NANDFLASH
dc018fef 60/* override the bootcmd, bootargs and other configuration for nandflash env*/
927b901b 61#elif CONFIG_SYS_USE_MMC
372ca03f 62/* override the bootcmd, bootargs and other configuration for sd/mmc env */
927b901b
BS
63#endif
64
5a4c9c22
BS
65/* SPL */
66#define CONFIG_SPL_FRAMEWORK
67#define CONFIG_SPL_TEXT_BASE 0x200000
ef33aa3d 68#define CONFIG_SPL_MAX_SIZE 0x18000
5a4c9c22
BS
69#define CONFIG_SPL_BSS_START_ADDR 0x20000000
70#define CONFIG_SPL_BSS_MAX_SIZE 0x80000
71#define CONFIG_SYS_SPL_MALLOC_START 0x20080000
72#define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000
73
5a4c9c22
BS
74#define CONFIG_SYS_MONITOR_LEN (512 << 10)
75
76#ifdef CONFIG_SYS_USE_MMC
993ea97e 77#define CONFIG_SPL_LDSCRIPT arch/arm/mach-at91/armv7/u-boot-spl.lds
5a4c9c22
BS
78#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
79#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
5a4c9c22
BS
80
81#elif CONFIG_SYS_USE_NANDFLASH
5a4c9c22
BS
82#define CONFIG_SPL_NAND_DRIVERS
83#define CONFIG_SPL_NAND_BASE
84#define CONFIG_PMECC_CAP 8
85#define CONFIG_PMECC_SECTOR_SIZE 512
86#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x40000
87#define CONFIG_SYS_NAND_5_ADDR_CYCLE
88#define CONFIG_SYS_NAND_PAGE_SIZE 0x1000
89#define CONFIG_SYS_NAND_PAGE_COUNT 64
90#define CONFIG_SYS_NAND_OOBSIZE 224
91#define CONFIG_SYS_NAND_BLOCK_SIZE 0x40000
92#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0x0
93#define CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER
94
95#elif CONFIG_SYS_USE_SERIALFLASH
5a4c9c22 96#define CONFIG_SPL_SPI_LOAD
ef33aa3d 97#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x10000
5a4c9c22
BS
98
99#endif
927b901b 100#endif