]> git.ipfire.org Git - people/ms/u-boot.git/blame - include/configs/sama5d4ek.h
ARM64: zynqmp: Differentiate EMMC boot mode
[people/ms/u-boot.git] / include / configs / sama5d4ek.h
CommitLineData
927b901b
BS
1/*
2 * Configuration settings for the SAMA5D4EK board.
3 *
4 * Copyright (C) 2014 Atmel
5 * Bo Shen <voice.shen@atmel.com>
6 *
7 * SPDX-License-Identifier: GPL-2.0+
8 */
9
10#ifndef __CONFIG_H
11#define __CONFIG_H
12
b2d387bc
WJ
13/* No NOR flash, this definition should put before common header */
14#define CONFIG_SYS_NO_FLASH
927b901b 15
b2d387bc 16#include "at91-sama5_common.h"
927b901b
BS
17
18/* serial console */
19#define CONFIG_ATMEL_USART
20#define CONFIG_USART_BASE ATMEL_BASE_USART3
21#define CONFIG_USART_ID ATMEL_ID_USART3
22
927b901b
BS
23/* SDRAM */
24#define CONFIG_NR_DRAM_BANKS 1
25#define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_DDRCS
26#define CONFIG_SYS_SDRAM_SIZE 0x20000000
27
5a4c9c22
BS
28#ifdef CONFIG_SPL_BUILD
29#define CONFIG_SYS_INIT_SP_ADDR 0x210000
30#else
927b901b
BS
31#define CONFIG_SYS_INIT_SP_ADDR \
32 (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
5a4c9c22 33#endif
927b901b
BS
34
35#define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */
36
37/* SerialFlash */
38#define CONFIG_CMD_SF
39
40#ifdef CONFIG_CMD_SF
41#define CONFIG_ATMEL_SPI
42#define CONFIG_ATMEL_SPI0
927b901b
BS
43#define CONFIG_SF_DEFAULT_BUS 0
44#define CONFIG_SF_DEFAULT_CS 0
45#define CONFIG_SF_DEFAULT_SPEED 30000000
46#endif
47
48/* NAND flash */
49#define CONFIG_CMD_NAND
50
51#ifdef CONFIG_CMD_NAND
52#define CONFIG_NAND_ATMEL
53#define CONFIG_SYS_MAX_NAND_DEVICE 1
54#define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3
55/* our ALE is AD21 */
56#define CONFIG_SYS_NAND_MASK_ALE (1 << 21)
57/* our CLE is AD22 */
58#define CONFIG_SYS_NAND_MASK_CLE (1 << 22)
59#define CONFIG_SYS_NAND_ONFI_DETECTION
60/* PMECC & PMERRLOC */
61#define CONFIG_ATMEL_NAND_HWECC
62#define CONFIG_ATMEL_NAND_HW_PMECC
63#endif
64
65/* MMC */
66#define CONFIG_CMD_MMC
67
68#ifdef CONFIG_CMD_MMC
69#define CONFIG_MMC
70#define CONFIG_GENERIC_MMC
71#define CONFIG_GENERIC_ATMEL_MCI
72#define ATMEL_BASE_MMCI ATMEL_BASE_MCI1
73#endif
74
75/* USB */
76#define CONFIG_CMD_USB
77
78#ifdef CONFIG_CMD_USB
79#define CONFIG_USB_EHCI
80#define CONFIG_USB_EHCI_ATMEL
81#define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
82#define CONFIG_USB_STORAGE
83#endif
84
cd5ca303
BS
85/* USB device */
86#define CONFIG_USB_GADGET
87#define CONFIG_USB_GADGET_DUALSPEED
88#define CONFIG_USB_GADGET_ATMEL_USBA
89#define CONFIG_USB_ETHER
90#define CONFIG_USB_ETH_RNDIS
91#define CONFIG_USBNET_MANUFACTURER "Atmel SAMA5D4EK"
92
927b901b
BS
93#if defined(CONFIG_CMD_USB) || defined(CONFIG_CMD_MMC)
94#define CONFIG_CMD_FAT
95#define CONFIG_DOS_PARTITION
96#endif
97
98/* Ethernet Hardware */
99#define CONFIG_MACB
100#define CONFIG_RMII
101#define CONFIG_NET_RETRY_COUNT 20
102#define CONFIG_MACB_SEARCH_PHY
103
104/* LCD */
105#define CONFIG_LCD
106#define LCD_BPP LCD_COLOR16
107#define LCD_OUTPUT_BPP 18
108#define CONFIG_LCD_LOGO
109#define CONFIG_LCD_INFO
110#define CONFIG_LCD_INFO_BELOW_LOGO
111#define CONFIG_SYS_WHITE_ON_BLACK
112#define CONFIG_ATMEL_HLCD
113#define CONFIG_ATMEL_LCD_RGB565
114#define CONFIG_SYS_CONSOLE_IS_IN_ENV
115
116#ifdef CONFIG_SYS_USE_SERIALFLASH
7a53b954 117/* override the bootcmd, bootargs and other configuration for spi flash env*/
927b901b 118#elif CONFIG_SYS_USE_NANDFLASH
dc018fef 119/* override the bootcmd, bootargs and other configuration for nandflash env*/
927b901b 120#elif CONFIG_SYS_USE_MMC
372ca03f 121/* override the bootcmd, bootargs and other configuration for sd/mmc env */
927b901b
BS
122#endif
123
5a4c9c22
BS
124/* SPL */
125#define CONFIG_SPL_FRAMEWORK
126#define CONFIG_SPL_TEXT_BASE 0x200000
127#define CONFIG_SPL_MAX_SIZE 0x10000
128#define CONFIG_SPL_BSS_START_ADDR 0x20000000
129#define CONFIG_SPL_BSS_MAX_SIZE 0x80000
130#define CONFIG_SYS_SPL_MALLOC_START 0x20080000
131#define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000
132
133#define CONFIG_SPL_LIBCOMMON_SUPPORT
134#define CONFIG_SPL_LIBGENERIC_SUPPORT
135#define CONFIG_SPL_GPIO_SUPPORT
136#define CONFIG_SPL_SERIAL_SUPPORT
137
138#define CONFIG_SPL_BOARD_INIT
139#define CONFIG_SYS_MONITOR_LEN (512 << 10)
140
141#ifdef CONFIG_SYS_USE_MMC
993ea97e 142#define CONFIG_SPL_LDSCRIPT arch/arm/mach-at91/armv7/u-boot-spl.lds
5a4c9c22
BS
143#define CONFIG_SPL_MMC_SUPPORT
144#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x400
145#define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x200
146#define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
147#define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
148#define CONFIG_SPL_FAT_SUPPORT
149#define CONFIG_SPL_LIBDISK_SUPPORT
150
151#elif CONFIG_SYS_USE_NANDFLASH
152#define CONFIG_SPL_NAND_SUPPORT
153#define CONFIG_SPL_NAND_DRIVERS
154#define CONFIG_SPL_NAND_BASE
155#define CONFIG_PMECC_CAP 8
156#define CONFIG_PMECC_SECTOR_SIZE 512
157#define CONFIG_SYS_NAND_U_BOOT_OFFS 0x40000
158#define CONFIG_SYS_NAND_5_ADDR_CYCLE
159#define CONFIG_SYS_NAND_PAGE_SIZE 0x1000
160#define CONFIG_SYS_NAND_PAGE_COUNT 64
161#define CONFIG_SYS_NAND_OOBSIZE 224
162#define CONFIG_SYS_NAND_BLOCK_SIZE 0x40000
163#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0x0
164#define CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER
165
166#elif CONFIG_SYS_USE_SERIALFLASH
167#define CONFIG_SPL_SPI_SUPPORT
168#define CONFIG_SPL_SPI_FLASH_SUPPORT
169#define CONFIG_SPL_SPI_LOAD
7a53b954 170#define CONFIG_SYS_SPI_U_BOOT_OFFS 0x8000
5a4c9c22
BS
171
172#endif
927b901b 173#endif