[people/ms/u-boot.git] / include / configs / sbc8548.h

/*
 * Copyright 2007 Wind River Systems <www.windriver.com>
 * Copyright 2007 Embedded Specialties, Inc.
 * Copyright 2004, 2007 Freescale Semiconductor.
 *
 * See file CREDITS for list of people who contributed to this
 * project.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
 * MA 02111-1307 USA
 */

/*
 * sbc8548 board configuration file
 *
 * Please refer to doc/README.sbc85xx for more info.
 *
 */
#ifndef __CONFIG_H
#define __CONFIG_H

/* High Level Configuration Options */
#define CONFIG_BOOKE		1	/* BOOKE */
#define CONFIG_E500		1	/* BOOKE e500 family */
#define CONFIG_MPC85xx		1	/* MPC8540/60/55/41/48 */
#define CONFIG_MPC8548		1	/* MPC8548 specific */
#define CONFIG_SBC8548		1	/* SBC8548 board specific */

#undef CONFIG_PCI		/* enable any pci type devices */
#undef CONFIG_PCI1		/* PCI controller 1 */
#undef CONFIG_PCIE1		/* PCIE controler 1 (slot 1) */
#undef CONFIG_RIO
#undef CONFIG_PCI2
#undef CONFIG_FSL_PCI_INIT		/* Use common FSL init code */

#define CONFIG_TSEC_ENET		/* tsec ethernet support */
#define CONFIG_ENV_OVERWRITE
#undef CONFIG_SPD_EEPROM		/* Use SPD EEPROM for DDR setup*/
#define CONFIG_DDR_DLL			/* possible DLL fix needed */
#define CONFIG_DDR_2T_TIMING		/* Sets the 2T timing bit */

#undef CONFIG_DDR_ECC			/* only for ECC DDR module */
#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER	/* DDR controller or DMA? */
#define CONFIG_MEM_INIT_VALUE		0xDeadBeef
#define CONFIG_INTERRUPTS		/* enable pci, srio, ddr interrupts */

#define CONFIG_FSL_LAW		1	/* Use common FSL init code */

#define MPC85xx_DDR_SDRAM_CLK_CNTL	/* 85xx has clock control reg */

#define CONFIG_SYS_CLK_FREQ	66000000 /* SBC8548 default SYSCLK */

/*
 * These can be toggled for performance analysis, otherwise use default.
 */
#define CONFIG_L2_CACHE			/* toggle L2 cache */
#define CONFIG_BTB			/* toggle branch predition */
#define CONFIG_ADDR_STREAMING		/* toggle addr streaming */
#define CONFIG_CLEAR_LAW0		/* Clear LAW0 in cpu_init_r */

/*
 * Only possible on E500 Version 2 or newer cores.
 */
#define CONFIG_ENABLE_36BIT_PHYS	1

#define CONFIG_BOARD_EARLY_INIT_F	1	/* Call board_pre_init */

#undef	CFG_DRAM_TEST			/* memory test, takes time */
#define CFG_MEMTEST_START	0x00200000	/* memtest works on */
#define CFG_MEMTEST_END		0x00400000

/*
 * Base addresses -- Note these are effective addresses where the
 * actual resources get mapped (not physical addresses)
 */
#define CFG_CCSRBAR_DEFAULT	0xff700000	/* CCSRBAR Default */
#define CFG_CCSRBAR		0xe0000000	/* relocated CCSRBAR */
#define CFG_IMMR		CFG_CCSRBAR	/* PQII uses CFG_IMMR */

#define CFG_PCI1_ADDR	(CFG_CCSRBAR+0x8000)
#define CFG_PCI2_ADDR	(CFG_CCSRBAR+0x9000)
#define CFG_PCIE1_ADDR	(CFG_CCSRBAR+0xa000)

/*
 * DDR Setup
 */
#define CFG_DDR_SDRAM_BASE	0x00000000	/* DDR is system memory*/
#define CFG_SDRAM_BASE		CFG_DDR_SDRAM_BASE

#define SPD_EEPROM_ADDRESS	0x51		/* DDR DIMM */

/*
 * Make sure required options are set
 */
#ifndef CONFIG_SPD_EEPROM
	#define CFG_SDRAM_SIZE	256		/* DDR is 256MB */
#endif

#undef CONFIG_CLOCKS_IN_MHZ

/*
 * FLASH on the Local Bus
 * Two banks, one 8MB the other 64MB, using the CFI driver.
 * Boot from BR0/OR0 bank at 0xff80_0000
 * Alternate BR6/OR6 bank at 0xfb80_0000
 *
 * BR0:
 *    Base address 0 = 0xff80_0000 = BR0[0:16] = 1111 1111 1000 0000 0
 *    Port Size = 8 bits = BRx[19:20] = 01
 *    Use GPCM = BRx[24:26] = 000
 *    Valid = BRx[31] = 1
 *
 * 0    4    8    12   16   20   24   28
 * 1111 1111 1000 0000 0000 1000 0000 0001 = ff800801    BR0
 *
 * BR6:
 *    Base address 6 = 0xfb80_0000 = BR6[0:16] = 1111 1011 1000 0000 0
 *    Port Size = 32 bits = BRx[19:20] = 11
 *    Use GPCM = BRx[24:26] = 000
 *    Valid = BRx[31] = 1
 *
 * 0    4    8    12   16   20   24   28
 * 1111 1011 1000 0000 0001 1000 0000 0001 = fb801801    BR6
 *
 * OR0:
 *    Addr Mask = 8M = OR1[0:16] = 1111 1111 1000 0000 0
 *    XAM = OR0[17:18] = 11
 *    CSNT = OR0[20] = 1
 *    ACS = half cycle delay = OR0[21:22] = 11
 *    SCY = 6 = OR0[24:27] = 0110
 *    TRLX = use relaxed timing = OR0[29] = 1
 *    EAD = use external address latch delay = OR0[31] = 1
 *
 * 0    4    8    12   16   20   24   28
 * 1111 1111 1000 0000 0110 1110 0110 0101 = ff806e65    OR0
 *
 * OR6:
 *    Addr Mask = 64M = OR6[0:16] = 1111 1100 0000 0000 0
 *    XAM = OR6[17:18] = 11
 *    CSNT = OR6[20] = 1
 *    ACS = half cycle delay = OR6[21:22] = 11
 *    SCY = 6 = OR6[24:27] = 0110
 *    TRLX = use relaxed timing = OR6[29] = 1
 *    EAD = use external address latch delay = OR6[31] = 1
 *
 * 0    4    8    12   16   20   24   28
 * 1111 1100 0000 0000 0110 1110 0110 0101 = fc006e65    OR6
 */

#define CFG_BOOT_BLOCK		0xff800000	/* start of 8MB Flash */
#define CFG_FLASH_BASE		CFG_BOOT_BLOCK	/* start of FLASH 16M */

#define CFG_BR0_PRELIM		0xff800801
#define CFG_BR6_PRELIM		0xfb801801

#define	CFG_OR0_PRELIM		0xff806e65
#define	CFG_OR6_PRELIM		0xfc006e65

#define CFG_FLASH_BANKS_LIST	{CFG_FLASH_BASE}
#define CFG_MAX_FLASH_BANKS	1		/* number of banks */
#define CFG_MAX_FLASH_SECT	128		/* sectors per device */
#undef	CFG_FLASH_CHECKSUM
#define CFG_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
#define CFG_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */

#define CFG_MONITOR_BASE    	TEXT_BASE	/* start of monitor */

#define CFG_FLASH_CFI_DRIVER
#define CFG_FLASH_CFI
#define CFG_FLASH_EMPTY_INFO

/* CS5 = Local bus peripherals controlled by the EPLD */

#define CFG_BR5_PRELIM		0xf8000801
#define CFG_OR5_PRELIM		0xff006e65
#define CFG_EPLD_BASE		0xf8000000
#define CFG_LED_DISP_BASE	0xf8000000
#define CFG_USER_SWITCHES_BASE	0xf8100000
#define CFG_BD_REV		0xf8300000
#define CFG_EEPROM_BASE		0xf8b00000

/*
 * SDRAM on the Local Bus
 */
#define CFG_LBC_SDRAM_BASE	0xf0000000	/* Localbus SDRAM */
#define CFG_LBC_SDRAM_SIZE	64		/* LBC SDRAM is 64MB */

/*
 * Base Register 3 and Option Register 3 configure SDRAM.
 * The SDRAM base address, CFG_LBC_SDRAM_BASE, is 0xf0000000.
 *
 * For BR3, need:
 *    Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0
 *    port-size = 32-bits = BR2[19:20] = 11
 *    no parity checking = BR2[21:22] = 00
 *    SDRAM for MSEL = BR2[24:26] = 011
 *    Valid = BR[31] = 1
 *
 * 0    4    8    12   16   20   24   28
 * 1111 0000 0000 0000 0001 1000 0110 0001 = f0001861
 *
 */

#define CFG_BR3_PRELIM		0xf0001861

/*
 * The SDRAM size in MB, CFG_LBC_SDRAM_SIZE, is 64.
 *
 * For OR3, need:
 *    64MB mask for AM, OR3[0:7] = 1111 1100
 *		   XAM, OR3[17:18] = 11
 *    10 columns OR3[19-21] = 011
 *    12 rows   OR3[23-25] = 011
 *    EAD set for extra time OR[31] = 0
 *
 * 0    4    8    12   16   20   24   28
 * 1111 1100 0000 0000 0110 1100 1100 0000 = fc006cc0
 */

#define CFG_OR3_PRELIM		0xfc006cc0

#define CFG_LBC_LCRR		0x00000002    /* LB clock ratio reg */
#define CFG_LBC_LBCR		0x00000000    /* LB config reg */
#define CFG_LBC_LSRT		0x20000000  /* LB sdram refresh timer */
#define CFG_LBC_MRTPR		0x00000000  /* LB refresh timer prescal*/

/*
 * LSDMR masks
 */
#define CFG_LBC_LSDMR_RFEN	(1 << (31 -  1))
#define CFG_LBC_LSDMR_BSMA1516	(3 << (31 - 10))
#define CFG_LBC_LSDMR_BSMA1617	(4 << (31 - 10))
#define CFG_LBC_LSDMR_RFCR16	(7 << (31 - 16))
#define CFG_LBC_LSDMR_PRETOACT7	(7 << (31 - 19))
#define CFG_LBC_LSDMR_ACTTORW7	(7 << (31 - 22))
#define CFG_LBC_LSDMR_ACTTORW6	(6 << (31 - 22))
#define CFG_LBC_LSDMR_BL8	(1 << (31 - 23))
#define CFG_LBC_LSDMR_WRC4	(0 << (31 - 27))
#define CFG_LBC_LSDMR_CL3	(3 << (31 - 31))

#define CFG_LBC_LSDMR_OP_NORMAL	(0 << (31 - 4))
#define CFG_LBC_LSDMR_OP_ARFRSH	(1 << (31 - 4))
#define CFG_LBC_LSDMR_OP_SRFRSH	(2 << (31 - 4))
#define CFG_LBC_LSDMR_OP_MRW	(3 << (31 - 4))
#define CFG_LBC_LSDMR_OP_PRECH	(4 << (31 - 4))
#define CFG_LBC_LSDMR_OP_PCHALL	(5 << (31 - 4))
#define CFG_LBC_LSDMR_OP_ACTBNK	(6 << (31 - 4))
#define CFG_LBC_LSDMR_OP_RWINV	(7 << (31 - 4))

/*
 * Common settings for all Local Bus SDRAM commands.
 * At run time, either BSMA1516 (for CPU 1.1)
 *                  or BSMA1617 (for CPU 1.0) (old)
 * is OR'ed in too.
 */
#define CFG_LBC_LSDMR_COMMON	( CFG_LBC_LSDMR_RFCR16		\
				| CFG_LBC_LSDMR_PRETOACT7	\
				| CFG_LBC_LSDMR_ACTTORW7	\
				| CFG_LBC_LSDMR_BL8		\
				| CFG_LBC_LSDMR_WRC4		\
				| CFG_LBC_LSDMR_CL3		\
				| CFG_LBC_LSDMR_RFEN		\
				)

#define CONFIG_L1_INIT_RAM
#define CFG_INIT_RAM_LOCK	1
#define CFG_INIT_RAM_ADDR	0xe4010000	/* Initial RAM address */
#define CFG_INIT_RAM_END	0x4000		/* End of used area in RAM */

#define CFG_INIT_L2_ADDR	0xf8f80000	/* relocate boot L2SRAM */

#define CFG_GBL_DATA_SIZE	128		/* num bytes initial data */
#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET

#define CFG_MONITOR_LEN		(256 * 1024) /* Reserve 256 kB for Mon */
#define CFG_MALLOC_LEN		(128 * 1024)	/* Reserved for malloc */

/* Serial Port */
#define CONFIG_CONS_INDEX	1
#undef	CONFIG_SERIAL_SOFTWARE_FIFO
#define CFG_NS16550
#define CFG_NS16550_SERIAL
#define CFG_NS16550_REG_SIZE	1
#define CFG_NS16550_CLK		400000000 /* get_bus_freq(0) */

#define CFG_BAUDRATE_TABLE \
	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}

#define CFG_NS16550_COM1	(CFG_CCSRBAR+0x4500)
#define CFG_NS16550_COM2	(CFG_CCSRBAR+0x4600)

/* Use the HUSH parser */
#define CFG_HUSH_PARSER
#ifdef	CFG_HUSH_PARSER
#define CFG_PROMPT_HUSH_PS2 "> "
#endif

/* pass open firmware flat tree */
#define CONFIG_OF_LIBFDT		1
#define CONFIG_OF_BOARD_SETUP		1
#define CONFIG_OF_STDOUT_VIA_ALIAS	1

/*
 * I2C
 */
#define CONFIG_FSL_I2C		/* Use FSL common I2C driver */
#define CONFIG_HARD_I2C		/* I2C with hardware support*/
#undef	CONFIG_SOFT_I2C		/* I2C bit-banged */
#define CFG_I2C_SPEED		400000	/* I2C speed and slave address */
#define CFG_I2C_EEPROM_ADDR	0x50
#define CFG_I2C_SLAVE		0x7F
#define CFG_I2C_OFFSET		0x3000

/*
 * General PCI
 * Memory space is mapped 1-1, but I/O space must start from 0.
 */
#define CFG_PCI_PHYS		0x80000000	/* 1G PCI TLB */

#define CFG_PCI1_MEM_BASE	0x80000000
#define CFG_PCI1_MEM_PHYS	CFG_PCI1_MEM_BASE
#define CFG_PCI1_MEM_SIZE	0x20000000	/* 512M */
#define CFG_PCI1_IO_BASE	0x00000000
#define CFG_PCI1_IO_PHYS	0xe2000000
#define CFG_PCI1_IO_SIZE	0x00100000	/* 1M */

#ifdef CONFIG_PCI2
#define CFG_PCI2_MEM_BASE	0xa0000000
#define CFG_PCI2_MEM_PHYS	CFG_PCI2_MEM_BASE
#define CFG_PCI2_MEM_SIZE	0x20000000	/* 512M */
#define CFG_PCI2_IO_BASE	0x00000000
#define CFG_PCI2_IO_PHYS	0xe2800000
#define CFG_PCI2_IO_SIZE	0x00100000	/* 1M */
#endif

#ifdef CONFIG_PCIE1
#define CFG_PCIE1_MEM_BASE	0xa0000000
#define CFG_PCIE1_MEM_PHYS	CFG_PCIE1_MEM_BASE
#define CFG_PCIE1_MEM_SIZE	0x20000000	/* 512M */
#define CFG_PCIE1_IO_BASE	0x00000000
#define CFG_PCIE1_IO_PHYS	0xe3000000
#define CFG_PCIE1_IO_SIZE	0x00100000	/*   1M */
#endif

#ifdef CONFIG_RIO
/*
 * RapidIO MMU
 */
#define CFG_RIO_MEM_BASE	0xC0000000
#define CFG_RIO_MEM_SIZE	0x20000000	/* 512M */
#endif

#ifdef CONFIG_LEGACY
#define BRIDGE_ID 17
#define VIA_ID 2
#else
#define BRIDGE_ID 28
#define VIA_ID 4
#endif

#if defined(CONFIG_PCI)

#define CONFIG_NET_MULTI
#define CONFIG_PCI_PNP			/* do pci plug-and-play */

#undef CONFIG_EEPRO100
#undef CONFIG_TULIP

#undef CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */

/* PCI view of System Memory */
#define CFG_PCI_MEMORY_BUS	0x00000000
#define CFG_PCI_MEMORY_PHYS	0x00000000
#define CFG_PCI_MEMORY_SIZE	0x80000000

#endif	/* CONFIG_PCI */


#if defined(CONFIG_TSEC_ENET)

#ifndef CONFIG_NET_MULTI
#define CONFIG_NET_MULTI	1
#endif

#define CONFIG_MII		1	/* MII PHY management */
#define CONFIG_TSEC1	1
#define CONFIG_TSEC1_NAME	"eTSEC0"
#define CONFIG_TSEC2	1
#define CONFIG_TSEC2_NAME	"eTSEC1"
#define CONFIG_TSEC3	1
#define CONFIG_TSEC3_NAME	"eTSEC2"
#define CONFIG_TSEC4
#define CONFIG_TSEC4_NAME	"eTSEC3"
#undef CONFIG_MPC85XX_FEC

#define TSEC1_PHY_ADDR		0
#define TSEC2_PHY_ADDR		1
#define TSEC3_PHY_ADDR		2
#define TSEC4_PHY_ADDR		3

#define TSEC1_PHYIDX		0
#define TSEC2_PHYIDX		0
#define TSEC3_PHYIDX		0
#define TSEC4_PHYIDX		0
#define TSEC1_FLAGS		TSEC_GIGABIT
#define TSEC2_FLAGS		TSEC_GIGABIT
#define TSEC3_FLAGS		(TSEC_GIGABIT | TSEC_REDUCED)
#define TSEC4_FLAGS		(TSEC_GIGABIT | TSEC_REDUCED)

/* Options are: eTSEC[0-3] */
#define CONFIG_ETHPRIME		"eTSEC0"
#define CONFIG_PHY_GIGE		1	/* Include GbE speed/duplex detection */
#endif	/* CONFIG_TSEC_ENET */

/*
 * Environment
 */
#define CFG_ENV_IS_IN_FLASH	1
#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + 0x40000)
#define CFG_ENV_SECT_SIZE	0x40000	/* 256K(one sector) for env */
#define CFG_ENV_SIZE		0x2000

#define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change */

/*
 * BOOTP options
 */
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME


/*
 * Command line configuration.
 */
#include <config_cmd_default.h>

#define CONFIG_CMD_PING
#define CONFIG_CMD_I2C
#define CONFIG_CMD_MII
#define CONFIG_CMD_ELF

#if defined(CONFIG_PCI)
    #define CONFIG_CMD_PCI
#endif


#undef CONFIG_WATCHDOG			/* watchdog disabled */

/*
 * Miscellaneous configurable options
 */
#define CFG_LONGHELP			/* undef to save memory	*/
#define CFG_LOAD_ADDR	0x2000000	/* default load address */
#define CFG_PROMPT	"=> "		/* Monitor Command Prompt */
#if defined(CONFIG_CMD_KGDB)
#define CFG_CBSIZE	1024		/* Console I/O Buffer Size */
#else
#define CFG_CBSIZE	256		/* Console I/O Buffer Size */
#endif
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
#define CFG_MAXARGS	16		/* max number of command args */
#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size */
#define CFG_HZ		1000		/* decrementer freq: 1ms ticks */

/*
 * For booting Linux, the board info and command line data
 * have to be in the first 8 MB of memory, since this is
 * the maximum mapped by the Linux kernel during initialization.
 */
#define CFG_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/

/*
 * Internal Definitions
 *
 * Boot Flags
 */
#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM	0x02		/* Software reboot */

#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
#endif

/*
 * Environment Configuration
 */

/* The mac addresses for all ethernet interface */
#if defined(CONFIG_TSEC_ENET)
#define CONFIG_HAS_ETH0
#define CONFIG_ETHADDR	 02:E0:0C:00:00:FD
#define CONFIG_HAS_ETH1
#define CONFIG_ETH1ADDR	 02:E0:0C:00:01:FD
#define CONFIG_HAS_ETH2
#define CONFIG_ETH2ADDR	 02:E0:0C:00:02:FD
#define CONFIG_HAS_ETH3
#define CONFIG_ETH3ADDR	 02:E0:0C:00:03:FD
#endif

#define CONFIG_IPADDR	 192.168.0.55

#define CONFIG_HOSTNAME	 sbc8548
#define CONFIG_ROOTPATH	 /opt/eldk/ppc_85xx
#define CONFIG_BOOTFILE	 /uImage
#define CONFIG_UBOOTPATH /u-boot.bin	/* TFTP server */

#define CONFIG_SERVERIP	 192.168.0.2
#define CONFIG_GATEWAYIP 192.168.0.1
#define CONFIG_NETMASK	 255.255.255.0

#define CONFIG_LOADADDR	1000000	/*default location for tftp and bootm*/

#define CONFIG_BOOTDELAY 10	/* -1 disables auto-boot */
#undef	CONFIG_BOOTARGS		/* the boot command will set bootargs*/

#define CONFIG_BAUDRATE	115200

#define	CONFIG_EXTRA_ENV_SETTINGS				\
 "netdev=eth0\0"						\
 "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0"				\
 "tftpflash=tftpboot $loadaddr $uboot; "			\
	"protect off " MK_STR(TEXT_BASE) " +$filesize; "	\
	"erase " MK_STR(TEXT_BASE) " +$filesize; "		\
	"cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; "	\
	"protect on " MK_STR(TEXT_BASE) " +$filesize; "		\
	"cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0"	\
 "consoledev=ttyS0\0"				\
 "ramdiskaddr=2000000\0"			\
 "ramdiskfile=uRamdisk\0"			\
 "fdtaddr=c00000\0"				\
 "fdtfile=sbc8548.dtb\0"

#define CONFIG_NFSBOOTCOMMAND						\
   "setenv bootargs root=/dev/nfs rw "					\
      "nfsroot=$serverip:$rootpath "					\
      "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
      "console=$consoledev,$baudrate $othbootargs;"			\
   "tftp $loadaddr $bootfile;"						\
   "tftp $fdtaddr $fdtfile;"						\
   "bootm $loadaddr - $fdtaddr"


#define CONFIG_RAMBOOTCOMMAND \
   "setenv bootargs root=/dev/ram rw "					\
      "console=$consoledev,$baudrate $othbootargs;"			\
   "tftp $ramdiskaddr $ramdiskfile;"					\
   "tftp $loadaddr $bootfile;"						\
   "tftp $fdtaddr $fdtfile;"						\
   "bootm $loadaddr $ramdiskaddr $fdtaddr"

#define CONFIG_BOOTCOMMAND	CONFIG_RAMBOOTCOMMAND

#endif	/* __CONFIG_H */
Commit	Line	Data
9e3ed392 JH	1	/*
	2	* Copyright 2007 Wind River Systems <www.windriver.com>
	3	* Copyright 2007 Embedded Specialties, Inc.
	4	* Copyright 2004, 2007 Freescale Semiconductor.
	5	*
	6	* See file CREDITS for list of people who contributed to this
	7	* project.
	8	*
	9	* This program is free software; you can redistribute it and/or
	10	* modify it under the terms of the GNU General Public License as
	11	* published by the Free Software Foundation; either version 2 of
	12	* the License, or (at your option) any later version.
	13	*
	14	* This program is distributed in the hope that it will be useful,
	15	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	16	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	17	* GNU General Public License for more details.
	18	*
	19	* You should have received a copy of the GNU General Public License
	20	* along with this program; if not, write to the Free Software
	21	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	22	* MA 02111-1307 USA
	23	*/
	24
	25	/*
	26	* sbc8548 board configuration file
	27	*
	28	* Please refer to doc/README.sbc85xx for more info.
	29	*
	30	*/
	31	#ifndef __CONFIG_H
	32	#define __CONFIG_H
	33
	34	/* High Level Configuration Options */
	35	#define CONFIG_BOOKE 1 /* BOOKE */
	36	#define CONFIG_E500 1 /* BOOKE e500 family */
	37	#define CONFIG_MPC85xx 1 /* MPC8540/60/55/41/48 */
	38	#define CONFIG_MPC8548 1 /* MPC8548 specific */
	39	#define CONFIG_SBC8548 1 /* SBC8548 board specific */
	40
	41	#undef CONFIG_PCI /* enable any pci type devices */
	42	#undef CONFIG_PCI1 /* PCI controller 1 */
	43	#undef CONFIG_PCIE1 /* PCIE controler 1 (slot 1) */
	44	#undef CONFIG_RIO
	45	#undef CONFIG_PCI2
	46	#undef CONFIG_FSL_PCI_INIT /* Use common FSL init code */
	47
	48	#define CONFIG_TSEC_ENET /* tsec ethernet support */
	49	#define CONFIG_ENV_OVERWRITE
	50	#undef CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/
	51	#define CONFIG_DDR_DLL /* possible DLL fix needed */
	52	#define CONFIG_DDR_2T_TIMING /* Sets the 2T timing bit */
	53
	54	#undef CONFIG_DDR_ECC /* only for ECC DDR module */
	55	#define CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */
	56	#define CONFIG_MEM_INIT_VALUE 0xDeadBeef
	57	#define CONFIG_INTERRUPTS /* enable pci, srio, ddr interrupts */
	58
e2b159d0	59	#define CONFIG_FSL_LAW 1 /* Use common FSL init code */
9e3ed392 JH	60
	61	#define MPC85xx_DDR_SDRAM_CLK_CNTL /* 85xx has clock control reg */
	62
	63	#define CONFIG_SYS_CLK_FREQ 66000000 /* SBC8548 default SYSCLK */
	64
	65	/*
	66	* These can be toggled for performance analysis, otherwise use default.
	67	*/
	68	#define CONFIG_L2_CACHE /* toggle L2 cache */
	69	#define CONFIG_BTB /* toggle branch predition */
	70	#define CONFIG_ADDR_STREAMING /* toggle addr streaming */
	71	#define CONFIG_CLEAR_LAW0 /* Clear LAW0 in cpu_init_r */
	72
	73	/*
	74	* Only possible on E500 Version 2 or newer cores.
	75	*/
	76	#define CONFIG_ENABLE_36BIT_PHYS 1
	77
	78	#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */
	79
	80	#undef CFG_DRAM_TEST /* memory test, takes time */
	81	#define CFG_MEMTEST_START 0x00200000 /* memtest works on */
	82	#define CFG_MEMTEST_END 0x00400000
	83
	84	/*
	85	* Base addresses -- Note these are effective addresses where the
	86	* actual resources get mapped (not physical addresses)
	87	*/
	88	#define CFG_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */
	89	#define CFG_CCSRBAR 0xe0000000 /* relocated CCSRBAR */
	90	#define CFG_IMMR CFG_CCSRBAR /* PQII uses CFG_IMMR */
	91
	92	#define CFG_PCI1_ADDR (CFG_CCSRBAR+0x8000)
	93	#define CFG_PCI2_ADDR (CFG_CCSRBAR+0x9000)
	94	#define CFG_PCIE1_ADDR (CFG_CCSRBAR+0xa000)
	95
	96	/*
	97	* DDR Setup
	98	*/
	99	#define CFG_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory*/
	100	#define CFG_SDRAM_BASE CFG_DDR_SDRAM_BASE
	101
	102	#define SPD_EEPROM_ADDRESS 0x51 /* DDR DIMM */
	103
	104	/*
	105	* Make sure required options are set
	106	*/
	107	#ifndef CONFIG_SPD_EEPROM
	108	#define CFG_SDRAM_SIZE 256 /* DDR is 256MB */
	109	#endif
	110
	111	#undef CONFIG_CLOCKS_IN_MHZ
	112
	113	/*
	114	* FLASH on the Local Bus
	115	* Two banks, one 8MB the other 64MB, using the CFI driver.
	116	* Boot from BR0/OR0 bank at 0xff80_0000
	117	* Alternate BR6/OR6 bank at 0xfb80_0000
	118	*
	119	* BR0:
	120	* Base address 0 = 0xff80_0000 = BR0[0:16] = 1111 1111 1000 0000 0
	121	* Port Size = 8 bits = BRx[19:20] = 01
	122	* Use GPCM = BRx[24:26] = 000
	123	* Valid = BRx[31] = 1
124	*
125	* 0 4 8 12 16 20 24 28
126	* 1111 1111 1000 0000 0000 1000 0000 0001 = ff800801 BR0
127	*
128	* BR6:
129	* Base address 6 = 0xfb80_0000 = BR6[0:16] = 1111 1011 1000 0000 0
130	* Port Size = 32 bits = BRx[19:20] = 11
131	* Use GPCM = BRx[24:26] = 000
132	* Valid = BRx[31] = 1
133	*
134	* 0 4 8 12 16 20 24 28
135	* 1111 1011 1000 0000 0001 1000 0000 0001 = fb801801 BR6
136	*
137	* OR0:
138	* Addr Mask = 8M = OR1[0:16] = 1111 1111 1000 0000 0
139	* XAM = OR0[17:18] = 11
140	* CSNT = OR0[20] = 1
141	* ACS = half cycle delay = OR0[21:22] = 11
142	* SCY = 6 = OR0[24:27] = 0110
143	* TRLX = use relaxed timing = OR0[29] = 1
144	* EAD = use external address latch delay = OR0[31] = 1
145	*
146	* 0 4 8 12 16 20 24 28
147	* 1111 1111 1000 0000 0110 1110 0110 0101 = ff806e65 OR0
148	*
149	* OR6:
150	* Addr Mask = 64M = OR6[0:16] = 1111 1100 0000 0000 0
151	* XAM = OR6[17:18] = 11
152	* CSNT = OR6[20] = 1
153	* ACS = half cycle delay = OR6[21:22] = 11
154	* SCY = 6 = OR6[24:27] = 0110
155	* TRLX = use relaxed timing = OR6[29] = 1
156	* EAD = use external address latch delay = OR6[31] = 1
157	*
158	* 0 4 8 12 16 20 24 28
159	* 1111 1100 0000 0000 0110 1110 0110 0101 = fc006e65 OR6
160	*/
161
162	#define CFG_BOOT_BLOCK 0xff800000 /* start of 8MB Flash */
163	#define CFG_FLASH_BASE CFG_BOOT_BLOCK /* start of FLASH 16M */
164
165	#define CFG_BR0_PRELIM 0xff800801
166	#define CFG_BR6_PRELIM 0xfb801801
167
168	#define CFG_OR0_PRELIM 0xff806e65
169	#define CFG_OR6_PRELIM 0xfc006e65
170
495d1623	171	#define CFG_FLASH_BANKS_LIST {CFG_FLASH_BASE}
9e3ed392 JH	172	#define CFG_MAX_FLASH_BANKS 1 /* number of banks */
	173	#define CFG_MAX_FLASH_SECT 128 /* sectors per device */
	174	#undef CFG_FLASH_CHECKSUM
	175	#define CFG_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
	176	#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
	177
	178	#define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */
	179
	180	#define CFG_FLASH_CFI_DRIVER
	181	#define CFG_FLASH_CFI
	182	#define CFG_FLASH_EMPTY_INFO
	183
	184	/* CS5 = Local bus peripherals controlled by the EPLD */
	185
	186	#define CFG_BR5_PRELIM 0xf8000801
	187	#define CFG_OR5_PRELIM 0xff006e65
	188	#define CFG_EPLD_BASE 0xf8000000
	189	#define CFG_LED_DISP_BASE 0xf8000000
	190	#define CFG_USER_SWITCHES_BASE 0xf8100000
	191	#define CFG_BD_REV 0xf8300000
	192	#define CFG_EEPROM_BASE 0xf8b00000
	193
	194	/*
	195	* SDRAM on the Local Bus
	196	*/
	197	#define CFG_LBC_SDRAM_BASE 0xf0000000 /* Localbus SDRAM */
	198	#define CFG_LBC_SDRAM_SIZE 64 /* LBC SDRAM is 64MB */
	199
	200	/*
	201	* Base Register 3 and Option Register 3 configure SDRAM.
	202	* The SDRAM base address, CFG_LBC_SDRAM_BASE, is 0xf0000000.
	203	*
	204	* For BR3, need:
	205	* Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0
	206	* port-size = 32-bits = BR2[19:20] = 11
	207	* no parity checking = BR2[21:22] = 00
	208	* SDRAM for MSEL = BR2[24:26] = 011
	209	* Valid = BR[31] = 1
	210	*
	211	* 0 4 8 12 16 20 24 28
	212	* 1111 0000 0000 0000 0001 1000 0110 0001 = f0001861
	213	*
	214	*/
	215
	216	#define CFG_BR3_PRELIM 0xf0001861
	217
	218	/*
	219	* The SDRAM size in MB, CFG_LBC_SDRAM_SIZE, is 64.
	220	*
	221	* For OR3, need:
	222	* 64MB mask for AM, OR3[0:7] = 1111 1100
	223	* XAM, OR3[17:18] = 11
	224	* 10 columns OR3[19-21] = 011
	225	* 12 rows OR3[23-25] = 011
	226	* EAD set for extra time OR[31] = 0
	227	*
	228	* 0 4 8 12 16 20 24 28
	229	* 1111 1100 0000 0000 0110 1100 1100 0000 = fc006cc0
	230	*/
	231
	232	#define CFG_OR3_PRELIM 0xfc006cc0
	233
	234	#define CFG_LBC_LCRR 0x00000002 /* LB clock ratio reg */
	235	#define CFG_LBC_LBCR 0x00000000 /* LB config reg */
236	#define CFG_LBC_LSRT 0x20000000 /* LB sdram refresh timer */
237	#define CFG_LBC_MRTPR 0x00000000 /* LB refresh timer prescal*/
238
239	/*
240	* LSDMR masks
241	*/
242	#define CFG_LBC_LSDMR_RFEN (1 << (31 - 1))
243	#define CFG_LBC_LSDMR_BSMA1516 (3 << (31 - 10))
244	#define CFG_LBC_LSDMR_BSMA1617 (4 << (31 - 10))
245	#define CFG_LBC_LSDMR_RFCR16 (7 << (31 - 16))
246	#define CFG_LBC_LSDMR_PRETOACT7 (7 << (31 - 19))
247	#define CFG_LBC_LSDMR_ACTTORW7 (7 << (31 - 22))
248	#define CFG_LBC_LSDMR_ACTTORW6 (6 << (31 - 22))
249	#define CFG_LBC_LSDMR_BL8 (1 << (31 - 23))
250	#define CFG_LBC_LSDMR_WRC4 (0 << (31 - 27))
251	#define CFG_LBC_LSDMR_CL3 (3 << (31 - 31))
252
253	#define CFG_LBC_LSDMR_OP_NORMAL (0 << (31 - 4))
254	#define CFG_LBC_LSDMR_OP_ARFRSH (1 << (31 - 4))
255	#define CFG_LBC_LSDMR_OP_SRFRSH (2 << (31 - 4))
256	#define CFG_LBC_LSDMR_OP_MRW (3 << (31 - 4))
257	#define CFG_LBC_LSDMR_OP_PRECH (4 << (31 - 4))
258	#define CFG_LBC_LSDMR_OP_PCHALL (5 << (31 - 4))
259	#define CFG_LBC_LSDMR_OP_ACTBNK (6 << (31 - 4))
260	#define CFG_LBC_LSDMR_OP_RWINV (7 << (31 - 4))
261
262	/*
263	* Common settings for all Local Bus SDRAM commands.
264	* At run time, either BSMA1516 (for CPU 1.1)
265	* or BSMA1617 (for CPU 1.0) (old)
266	* is OR'ed in too.
267	*/
268	#define CFG_LBC_LSDMR_COMMON ( CFG_LBC_LSDMR_RFCR16 \
269	\| CFG_LBC_LSDMR_PRETOACT7 \
270	\| CFG_LBC_LSDMR_ACTTORW7 \
271	\| CFG_LBC_LSDMR_BL8 \
272	\| CFG_LBC_LSDMR_WRC4 \
273	\| CFG_LBC_LSDMR_CL3 \
274	\| CFG_LBC_LSDMR_RFEN \
275	)
276
277	#define CONFIG_L1_INIT_RAM
278	#define CFG_INIT_RAM_LOCK 1
279	#define CFG_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */
280	#define CFG_INIT_RAM_END 0x4000 /* End of used area in RAM */
281
282	#define CFG_INIT_L2_ADDR 0xf8f80000 /* relocate boot L2SRAM */
283
284	#define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */
285	#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
286	#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
287
288	#define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
289	#define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */
290
291	/* Serial Port */
292	#define CONFIG_CONS_INDEX 1
293	#undef CONFIG_SERIAL_SOFTWARE_FIFO
294	#define CFG_NS16550
295	#define CFG_NS16550_SERIAL
296	#define CFG_NS16550_REG_SIZE 1
297	#define CFG_NS16550_CLK 400000000 /* get_bus_freq(0) */
298
299	#define CFG_BAUDRATE_TABLE \
300	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
301
302	#define CFG_NS16550_COM1 (CFG_CCSRBAR+0x4500)
303	#define CFG_NS16550_COM2 (CFG_CCSRBAR+0x4600)
304
305	/* Use the HUSH parser */
306	#define CFG_HUSH_PARSER
307	#ifdef CFG_HUSH_PARSER
308	#define CFG_PROMPT_HUSH_PS2 "> "
309	#endif
310
311	/* pass open firmware flat tree */
312	#define CONFIG_OF_LIBFDT 1
313	#define CONFIG_OF_BOARD_SETUP 1
314	#define CONFIG_OF_STDOUT_VIA_ALIAS 1
315
316	/*
317	* I2C
318	*/
319	#define CONFIG_FSL_I2C /* Use FSL common I2C driver */
320	#define CONFIG_HARD_I2C /* I2C with hardware support*/
321	#undef CONFIG_SOFT_I2C /* I2C bit-banged */
322	#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
323	#define CFG_I2C_EEPROM_ADDR 0x50
324	#define CFG_I2C_SLAVE 0x7F
325	#define CFG_I2C_OFFSET 0x3000
326
327	/*
328	* General PCI
329	* Memory space is mapped 1-1, but I/O space must start from 0.
330	*/
331	#define CFG_PCI_PHYS 0x80000000 /* 1G PCI TLB */
332
333	#define CFG_PCI1_MEM_BASE 0x80000000
334	#define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE
335	#define CFG_PCI1_MEM_SIZE 0x20000000 /* 512M */
336	#define CFG_PCI1_IO_BASE 0x00000000
337	#define CFG_PCI1_IO_PHYS 0xe2000000
338	#define CFG_PCI1_IO_SIZE 0x00100000 /* 1M */
339
340	#ifdef CONFIG_PCI2
341	#define CFG_PCI2_MEM_BASE 0xa0000000
342	#define CFG_PCI2_MEM_PHYS CFG_PCI2_MEM_BASE
343	#define CFG_PCI2_MEM_SIZE 0x20000000 /* 512M */
344	#define CFG_PCI2_IO_BASE 0x00000000
345	#define CFG_PCI2_IO_PHYS 0xe2800000
346	#define CFG_PCI2_IO_SIZE 0x00100000 /* 1M */
347	#endif
348
349	#ifdef CONFIG_PCIE1
350	#define CFG_PCIE1_MEM_BASE 0xa0000000
351	#define CFG_PCIE1_MEM_PHYS CFG_PCIE1_MEM_BASE
352	#define CFG_PCIE1_MEM_SIZE 0x20000000 /* 512M */
353	#define CFG_PCIE1_IO_BASE 0x00000000
354	#define CFG_PCIE1_IO_PHYS 0xe3000000
355	#define CFG_PCIE1_IO_SIZE 0x00100000 /* 1M */
356	#endif
357
358	#ifdef CONFIG_RIO
359	/*
360	* RapidIO MMU
361	*/
362	#define CFG_RIO_MEM_BASE 0xC0000000
363	#define CFG_RIO_MEM_SIZE 0x20000000 /* 512M */
364	#endif
365
366	#ifdef CONFIG_LEGACY
367	#define BRIDGE_ID 17
368	#define VIA_ID 2
369	#else
370	#define BRIDGE_ID 28
371	#define VIA_ID 4
372	#endif
373
374	#if defined(CONFIG_PCI)
375
376	#define CONFIG_NET_MULTI
377	#define CONFIG_PCI_PNP /* do pci plug-and-play */
378
379	#undef CONFIG_EEPRO100
380	#undef CONFIG_TULIP
381
382	#undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
383
384	/* PCI view of System Memory */
385	#define CFG_PCI_MEMORY_BUS 0x00000000
386	#define CFG_PCI_MEMORY_PHYS 0x00000000
387	#define CFG_PCI_MEMORY_SIZE 0x80000000
388
389	#endif /* CONFIG_PCI */
390
391
392	#if defined(CONFIG_TSEC_ENET)
393
394	#ifndef CONFIG_NET_MULTI
395	#define CONFIG_NET_MULTI 1
396	#endif
397
398	#define CONFIG_MII 1 /* MII PHY management */
399	#define CONFIG_TSEC1 1
400	#define CONFIG_TSEC1_NAME "eTSEC0"
401	#define CONFIG_TSEC2 1
402	#define CONFIG_TSEC2_NAME "eTSEC1"
403	#define CONFIG_TSEC3 1
404	#define CONFIG_TSEC3_NAME "eTSEC2"
405	#define CONFIG_TSEC4
406	#define CONFIG_TSEC4_NAME "eTSEC3"
407	#undef CONFIG_MPC85XX_FEC
408
409	#define TSEC1_PHY_ADDR 0
410	#define TSEC2_PHY_ADDR 1
411	#define TSEC3_PHY_ADDR 2
412	#define TSEC4_PHY_ADDR 3
413
414	#define TSEC1_PHYIDX 0
415	#define TSEC2_PHYIDX 0
416	#define TSEC3_PHYIDX 0
417	#define TSEC4_PHYIDX 0
418	#define TSEC1_FLAGS TSEC_GIGABIT
419	#define TSEC2_FLAGS TSEC_GIGABIT
420	#define TSEC3_FLAGS (TSEC_GIGABIT \| TSEC_REDUCED)
421	#define TSEC4_FLAGS (TSEC_GIGABIT \| TSEC_REDUCED)
422
423	/* Options are: eTSEC[0-3] */
424	#define CONFIG_ETHPRIME "eTSEC0"
425	#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */
426	#endif /* CONFIG_TSEC_ENET */
427
428	/*
429	* Environment
430	*/
431	#define CFG_ENV_IS_IN_FLASH 1
432	#define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000)
433	#define CFG_ENV_SECT_SIZE 0x40000 /* 256K(one sector) for env */
434	#define CFG_ENV_SIZE 0x2000
435
436	#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
437	#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
438
439	/*
440	* BOOTP options
441	*/
442	#define CONFIG_BOOTP_BOOTFILESIZE
443	#define CONFIG_BOOTP_BOOTPATH
444	#define CONFIG_BOOTP_GATEWAY
445	#define CONFIG_BOOTP_HOSTNAME
446
447
448	/*
449	* Command line configuration.
450	*/
451	#include <config_cmd_default.h>
452
453	#define CONFIG_CMD_PING
454	#define CONFIG_CMD_I2C
455	#define CONFIG_CMD_MII
456	#define CONFIG_CMD_ELF
457
458	#if defined(CONFIG_PCI)
459	#define CONFIG_CMD_PCI
460	#endif
461
462
463	#undef CONFIG_WATCHDOG /* watchdog disabled */
464
465	/*
466	* Miscellaneous configurable options
467	*/
468	#define CFG_LONGHELP /* undef to save memory */
469	#define CFG_LOAD_ADDR 0x2000000 /* default load address */
470	#define CFG_PROMPT "=> " /* Monitor Command Prompt */
471	#if defined(CONFIG_CMD_KGDB)
472	#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
473	#else
474	#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
475	#endif
476	#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
477	#define CFG_MAXARGS 16 /* max number of command args */
478	#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
479	#define CFG_HZ 1000 /* decrementer freq: 1ms ticks */
480
481	/*
482	* For booting Linux, the board info and command line data
483	* have to be in the first 8 MB of memory, since this is
484	* the maximum mapped by the Linux kernel during initialization.
485	*/
486	#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/
487
9e3ed392 JH	488	/*
	489	* Internal Definitions
	490	*
	491	* Boot Flags
	492	*/
	493	#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
	494	#define BOOTFLAG_WARM 0x02 /* Software reboot */
	495
	496	#if defined(CONFIG_CMD_KGDB)
	497	#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
	498	#define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */
	499	#endif
	500
	501	/*
	502	* Environment Configuration
	503	*/
	504
	505	/* The mac addresses for all ethernet interface */
	506	#if defined(CONFIG_TSEC_ENET)
	507	#define CONFIG_HAS_ETH0
	508	#define CONFIG_ETHADDR 02:E0:0C:00:00:FD
	509	#define CONFIG_HAS_ETH1
	510	#define CONFIG_ETH1ADDR 02:E0:0C:00:01:FD
	511	#define CONFIG_HAS_ETH2
	512	#define CONFIG_ETH2ADDR 02:E0:0C:00:02:FD
	513	#define CONFIG_HAS_ETH3
	514	#define CONFIG_ETH3ADDR 02:E0:0C:00:03:FD
	515	#endif
	516
	517	#define CONFIG_IPADDR 192.168.0.55
	518
	519	#define CONFIG_HOSTNAME sbc8548
	520	#define CONFIG_ROOTPATH /opt/eldk/ppc_85xx
	521	#define CONFIG_BOOTFILE /uImage
	522	#define CONFIG_UBOOTPATH /u-boot.bin /* TFTP server */
	523
	524	#define CONFIG_SERVERIP 192.168.0.2
	525	#define CONFIG_GATEWAYIP 192.168.0.1
	526	#define CONFIG_NETMASK 255.255.255.0
	527
	528	#define CONFIG_LOADADDR 1000000 /default location for tftp and bootm/
	529
	530	#define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */
	531	#undef CONFIG_BOOTARGS /* the boot command will set bootargs*/
	532
	533	#define CONFIG_BAUDRATE 115200
	534
	535	#define CONFIG_EXTRA_ENV_SETTINGS \
	536	"netdev=eth0\0" \
	537	"uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \
	538	"tftpflash=tftpboot $loadaddr $uboot; " \
	539	"protect off " MK_STR(TEXT_BASE) " +$filesize; " \
	540	"erase " MK_STR(TEXT_BASE) " +$filesize; " \
	541	"cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; " \
	542	"protect on " MK_STR(TEXT_BASE) " +$filesize; " \
	543	"cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0" \
	544	"consoledev=ttyS0\0" \
	545	"ramdiskaddr=2000000\0" \
	546	"ramdiskfile=uRamdisk\0" \
	547	"fdtaddr=c00000\0" \
	548	"fdtfile=sbc8548.dtb\0"
	549
	550	#define CONFIG_NFSBOOTCOMMAND \
	551	"setenv bootargs root=/dev/nfs rw " \
552	"nfsroot=$serverip:$rootpath " \
553	"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
554	"console=$consoledev,$baudrate $othbootargs;" \
555	"tftp $loadaddr $bootfile;" \
556	"tftp $fdtaddr $fdtfile;" \
557	"bootm $loadaddr - $fdtaddr"
558
559
560	#define CONFIG_RAMBOOTCOMMAND \
561	"setenv bootargs root=/dev/ram rw " \
562	"console=$consoledev,$baudrate $othbootargs;" \
563	"tftp $ramdiskaddr $ramdiskfile;" \
564	"tftp $loadaddr $bootfile;" \
565	"tftp $fdtaddr $fdtfile;" \
566	"bootm $loadaddr $ramdiskaddr $fdtaddr"
567
568	#define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND
569
570	#endif /* __CONFIG_H */