]>
Commit | Line | Data |
---|---|---|
9e3ed392 | 1 | /* |
2738bc8d | 2 | * Copyright 2007,2009 Wind River Systems <www.windriver.com> |
9e3ed392 JH |
3 | * Copyright 2007 Embedded Specialties, Inc. |
4 | * Copyright 2004, 2007 Freescale Semiconductor. | |
5 | * | |
1a459660 | 6 | * SPDX-License-Identifier: GPL-2.0+ |
9e3ed392 JH |
7 | */ |
8 | ||
9 | /* | |
10 | * sbc8548 board configuration file | |
2738bc8d | 11 | * Please refer to doc/README.sbc8548 for more info. |
9e3ed392 JH |
12 | */ |
13 | #ifndef __CONFIG_H | |
14 | #define __CONFIG_H | |
15 | ||
2bf4207b PG |
16 | #define CONFIG_SYS_GENERIC_BOARD |
17 | ||
2738bc8d PG |
18 | /* |
19 | * Top level Makefile configuration choices | |
20 | */ | |
d24f2d32 | 21 | #ifdef CONFIG_PCI |
842033e6 | 22 | #define CONFIG_PCI_INDIRECT_BRIDGE |
2738bc8d PG |
23 | #define CONFIG_PCI1 |
24 | #endif | |
25 | ||
d24f2d32 | 26 | #ifdef CONFIG_66 |
2738bc8d PG |
27 | #define CONFIG_SYS_CLK_DIV 1 |
28 | #endif | |
29 | ||
d24f2d32 | 30 | #ifdef CONFIG_33 |
2738bc8d PG |
31 | #define CONFIG_SYS_CLK_DIV 2 |
32 | #endif | |
33 | ||
d24f2d32 | 34 | #ifdef CONFIG_PCIE |
2738bc8d PG |
35 | #define CONFIG_PCIE1 |
36 | #endif | |
37 | ||
38 | /* | |
39 | * High Level Configuration Options | |
40 | */ | |
9e3ed392 JH |
41 | #define CONFIG_BOOKE 1 /* BOOKE */ |
42 | #define CONFIG_E500 1 /* BOOKE e500 family */ | |
9e3ed392 JH |
43 | #define CONFIG_MPC8548 1 /* MPC8548 specific */ |
44 | #define CONFIG_SBC8548 1 /* SBC8548 board specific */ | |
45 | ||
f0aec4ea PG |
46 | /* |
47 | * If you want to boot from the SODIMM flash, instead of the soldered | |
48 | * on flash, set this, and change JP12, SW2:8 accordingly. | |
49 | */ | |
50 | #undef CONFIG_SYS_ALT_BOOT | |
51 | ||
2ae18241 | 52 | #ifndef CONFIG_SYS_TEXT_BASE |
f0aec4ea PG |
53 | #ifdef CONFIG_SYS_ALT_BOOT |
54 | #define CONFIG_SYS_TEXT_BASE 0xfff00000 | |
55 | #else | |
2ae18241 WD |
56 | #define CONFIG_SYS_TEXT_BASE 0xfffa0000 |
57 | #endif | |
f0aec4ea | 58 | #endif |
2ae18241 | 59 | |
9e3ed392 | 60 | #undef CONFIG_RIO |
fdc7eb90 PG |
61 | |
62 | #ifdef CONFIG_PCI | |
63 | #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ | |
64 | #define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */ | |
65 | #endif | |
66 | #ifdef CONFIG_PCIE1 | |
67 | #define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */ | |
68 | #endif | |
9e3ed392 JH |
69 | |
70 | #define CONFIG_TSEC_ENET /* tsec ethernet support */ | |
71 | #define CONFIG_ENV_OVERWRITE | |
9e3ed392 | 72 | |
9e3ed392 JH |
73 | #define CONFIG_INTERRUPTS /* enable pci, srio, ddr interrupts */ |
74 | ||
e2b159d0 | 75 | #define CONFIG_FSL_LAW 1 /* Use common FSL init code */ |
9e3ed392 | 76 | |
2738bc8d PG |
77 | /* |
78 | * Below assumes that CCB:SYSCLK remains unchanged at 6:1 via SW2:[1-4] | |
79 | */ | |
80 | #ifndef CONFIG_SYS_CLK_DIV | |
81 | #define CONFIG_SYS_CLK_DIV 1 /* 2, if 33MHz PCI card installed */ | |
82 | #endif | |
83 | #define CONFIG_SYS_CLK_FREQ (66000000 / CONFIG_SYS_CLK_DIV) | |
9e3ed392 JH |
84 | |
85 | /* | |
86 | * These can be toggled for performance analysis, otherwise use default. | |
87 | */ | |
88 | #define CONFIG_L2_CACHE /* toggle L2 cache */ | |
89 | #define CONFIG_BTB /* toggle branch predition */ | |
9e3ed392 JH |
90 | |
91 | /* | |
92 | * Only possible on E500 Version 2 or newer cores. | |
93 | */ | |
94 | #define CONFIG_ENABLE_36BIT_PHYS 1 | |
95 | ||
96 | #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ | |
97 | ||
6d0f6bcf JCPV |
98 | #undef CONFIG_SYS_DRAM_TEST /* memory test, takes time */ |
99 | #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ | |
100 | #define CONFIG_SYS_MEMTEST_END 0x00400000 | |
9e3ed392 | 101 | |
e46fedfe TT |
102 | #define CONFIG_SYS_CCSRBAR 0xe0000000 |
103 | #define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR | |
9e3ed392 | 104 | |
33b9079b | 105 | /* DDR Setup */ |
5614e71b | 106 | #define CONFIG_SYS_FSL_DDR2 |
33b9079b | 107 | #undef CONFIG_FSL_DDR_INTERACTIVE |
7e44f2b7 PG |
108 | #undef CONFIG_DDR_ECC /* only for ECC DDR module */ |
109 | /* | |
110 | * A hardware errata caused the LBC SDRAM SPD and the DDR2 SPD | |
111 | * to collide, meaning you couldn't reliably read either. So | |
112 | * physically remove the LBC PC100 SDRAM module from the board | |
3e3262bd PG |
113 | * before enabling the two SPD options below, or check that you |
114 | * have the hardware fix on your board via "i2c probe" and looking | |
115 | * for a device at 0x53. | |
7e44f2b7 | 116 | */ |
33b9079b KG |
117 | #undef CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */ |
118 | #undef CONFIG_DDR_SPD | |
33b9079b KG |
119 | |
120 | #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */ | |
121 | #define CONFIG_MEM_INIT_VALUE 0xDeadBeef | |
122 | ||
6d0f6bcf JCPV |
123 | #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 |
124 | #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE | |
33b9079b KG |
125 | #define CONFIG_VERY_BIG_RAM |
126 | ||
127 | #define CONFIG_NUM_DDR_CONTROLLERS 1 | |
128 | #define CONFIG_DIMM_SLOTS_PER_CTLR 1 | |
129 | #define CONFIG_CHIP_SELECTS_PER_CTRL 2 | |
9e3ed392 | 130 | |
3e3262bd PG |
131 | /* |
132 | * The hardware fix for the I2C address collision puts the DDR | |
133 | * SPD at 0x53, but if we are running on an older board w/o the | |
134 | * fix, it will still be at 0x51. We check 0x53 1st. | |
135 | */ | |
33b9079b | 136 | #define SPD_EEPROM_ADDRESS 0x51 /* CTLR 0 DIMM 0 */ |
3e3262bd | 137 | #define ALT_SPD_EEPROM_ADDRESS 0x53 /* CTLR 0 DIMM 0 */ |
9e3ed392 JH |
138 | |
139 | /* | |
140 | * Make sure required options are set | |
141 | */ | |
142 | #ifndef CONFIG_SPD_EEPROM | |
6d0f6bcf | 143 | #define CONFIG_SYS_SDRAM_SIZE 256 /* DDR is 256MB */ |
2a6b3b74 | 144 | #define CONFIG_SYS_DDR_CONTROL 0xc300c000 |
9e3ed392 JH |
145 | #endif |
146 | ||
147 | #undef CONFIG_CLOCKS_IN_MHZ | |
148 | ||
149 | /* | |
150 | * FLASH on the Local Bus | |
151 | * Two banks, one 8MB the other 64MB, using the CFI driver. | |
f0aec4ea PG |
152 | * JP12+SW2.8 are used to swap CS0 and CS6, defaults are to have |
153 | * CS0 the 8MB boot flash, and CS6 the 64MB flash. | |
154 | * | |
155 | * Default: | |
156 | * ec00_0000 efff_ffff 64MB SODIMM | |
157 | * ff80_0000 ffff_ffff 8MB soldered flash | |
9e3ed392 | 158 | * |
f0aec4ea PG |
159 | * Alternate: |
160 | * ef80_0000 efff_ffff 8MB soldered flash | |
161 | * fc00_0000 ffff_ffff 64MB SODIMM | |
162 | * | |
163 | * BR0_8M: | |
9e3ed392 JH |
164 | * Base address 0 = 0xff80_0000 = BR0[0:16] = 1111 1111 1000 0000 0 |
165 | * Port Size = 8 bits = BRx[19:20] = 01 | |
166 | * Use GPCM = BRx[24:26] = 000 | |
167 | * Valid = BRx[31] = 1 | |
168 | * | |
f0aec4ea PG |
169 | * BR0_64M: |
170 | * Base address 0 = 0xfc00_0000 = BR0[0:16] = 1111 1100 0000 0000 0 | |
9e3ed392 | 171 | * Port Size = 32 bits = BRx[19:20] = 11 |
f0aec4ea PG |
172 | * |
173 | * 0 4 8 12 16 20 24 28 | |
174 | * 1111 1111 1000 0000 0000 1000 0000 0001 = ff800801 BR0_8M | |
175 | * 1111 1100 0000 0000 0001 1000 0000 0001 = fc001801 BR0_64M | |
176 | */ | |
177 | #define CONFIG_SYS_BR0_8M 0xff800801 | |
178 | #define CONFIG_SYS_BR0_64M 0xfc001801 | |
179 | ||
180 | /* | |
181 | * BR6_8M: | |
182 | * Base address 6 = 0xef80_0000 = BR6[0:16] = 1110 1111 1000 0000 0 | |
183 | * Port Size = 8 bits = BRx[19:20] = 01 | |
9e3ed392 JH |
184 | * Use GPCM = BRx[24:26] = 000 |
185 | * Valid = BRx[31] = 1 | |
f0aec4ea PG |
186 | |
187 | * BR6_64M: | |
188 | * Base address 6 = 0xec00_0000 = BR6[0:16] = 1110 1100 0000 0000 0 | |
189 | * Port Size = 32 bits = BRx[19:20] = 11 | |
9e3ed392 JH |
190 | * |
191 | * 0 4 8 12 16 20 24 28 | |
f0aec4ea PG |
192 | * 1110 1111 1000 0000 0000 1000 0000 0001 = ef800801 BR6_8M |
193 | * 1110 1100 0000 0000 0001 1000 0000 0001 = ec001801 BR6_64M | |
194 | */ | |
195 | #define CONFIG_SYS_BR6_8M 0xef800801 | |
196 | #define CONFIG_SYS_BR6_64M 0xec001801 | |
197 | ||
198 | /* | |
199 | * OR0_8M: | |
9e3ed392 JH |
200 | * Addr Mask = 8M = OR1[0:16] = 1111 1111 1000 0000 0 |
201 | * XAM = OR0[17:18] = 11 | |
202 | * CSNT = OR0[20] = 1 | |
203 | * ACS = half cycle delay = OR0[21:22] = 11 | |
204 | * SCY = 6 = OR0[24:27] = 0110 | |
205 | * TRLX = use relaxed timing = OR0[29] = 1 | |
206 | * EAD = use external address latch delay = OR0[31] = 1 | |
207 | * | |
f0aec4ea PG |
208 | * OR0_64M: |
209 | * Addr Mask = 64M = OR1[0:16] = 1111 1100 0000 0000 0 | |
9e3ed392 | 210 | * |
f0aec4ea PG |
211 | * |
212 | * 0 4 8 12 16 20 24 28 | |
213 | * 1111 1111 1000 0000 0110 1110 0110 0101 = ff806e65 OR0_8M | |
214 | * 1111 1100 0000 0000 0110 1110 0110 0101 = fc006e65 OR0_64M | |
215 | */ | |
216 | #define CONFIG_SYS_OR0_8M 0xff806e65 | |
217 | #define CONFIG_SYS_OR0_64M 0xfc006e65 | |
218 | ||
219 | /* | |
220 | * OR6_8M: | |
221 | * Addr Mask = 8M = OR6[0:16] = 1111 1111 1000 0000 0 | |
9e3ed392 JH |
222 | * XAM = OR6[17:18] = 11 |
223 | * CSNT = OR6[20] = 1 | |
224 | * ACS = half cycle delay = OR6[21:22] = 11 | |
225 | * SCY = 6 = OR6[24:27] = 0110 | |
226 | * TRLX = use relaxed timing = OR6[29] = 1 | |
227 | * EAD = use external address latch delay = OR6[31] = 1 | |
228 | * | |
f0aec4ea PG |
229 | * OR6_64M: |
230 | * Addr Mask = 64M = OR6[0:16] = 1111 1100 0000 0000 0 | |
231 | * | |
9e3ed392 | 232 | * 0 4 8 12 16 20 24 28 |
f0aec4ea PG |
233 | * 1111 1111 1000 0000 0110 1110 0110 0101 = ff806e65 OR6_8M |
234 | * 1111 1100 0000 0000 0110 1110 0110 0101 = fc006e65 OR6_64M | |
9e3ed392 | 235 | */ |
f0aec4ea PG |
236 | #define CONFIG_SYS_OR6_8M 0xff806e65 |
237 | #define CONFIG_SYS_OR6_64M 0xfc006e65 | |
9e3ed392 | 238 | |
f0aec4ea | 239 | #ifndef CONFIG_SYS_ALT_BOOT /* JP12 in default position */ |
6d0f6bcf | 240 | #define CONFIG_SYS_BOOT_BLOCK 0xff800000 /* start of 8MB Flash */ |
3fd673cf | 241 | #define CONFIG_SYS_ALT_FLASH 0xec000000 /* 64MB "user" flash */ |
9e3ed392 | 242 | |
f0aec4ea PG |
243 | #define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_BR0_8M |
244 | #define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_OR0_8M | |
245 | ||
246 | #define CONFIG_SYS_BR6_PRELIM CONFIG_SYS_BR6_64M | |
247 | #define CONFIG_SYS_OR6_PRELIM CONFIG_SYS_OR6_64M | |
248 | #else /* JP12 in alternate position */ | |
249 | #define CONFIG_SYS_BOOT_BLOCK 0xfc000000 /* start 64MB Flash */ | |
250 | #define CONFIG_SYS_ALT_FLASH 0xef800000 /* 8MB soldered flash */ | |
9e3ed392 | 251 | |
f0aec4ea PG |
252 | #define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_BR0_64M |
253 | #define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_OR0_64M | |
254 | ||
255 | #define CONFIG_SYS_BR6_PRELIM CONFIG_SYS_BR6_8M | |
256 | #define CONFIG_SYS_OR6_PRELIM CONFIG_SYS_OR6_8M | |
257 | #endif | |
9e3ed392 | 258 | |
f0aec4ea | 259 | #define CONFIG_SYS_FLASH_BASE CONFIG_SYS_BOOT_BLOCK |
9b3ba24f PG |
260 | #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE, \ |
261 | CONFIG_SYS_ALT_FLASH} | |
262 | #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ | |
263 | #define CONFIG_SYS_MAX_FLASH_SECT 256 /* sectors per device */ | |
6d0f6bcf JCPV |
264 | #undef CONFIG_SYS_FLASH_CHECKSUM |
265 | #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ | |
266 | #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ | |
9e3ed392 | 267 | |
14d0a02a | 268 | #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ |
9e3ed392 | 269 | |
00b1883a | 270 | #define CONFIG_FLASH_CFI_DRIVER |
6d0f6bcf JCPV |
271 | #define CONFIG_SYS_FLASH_CFI |
272 | #define CONFIG_SYS_FLASH_EMPTY_INFO | |
9e3ed392 JH |
273 | |
274 | /* CS5 = Local bus peripherals controlled by the EPLD */ | |
275 | ||
6d0f6bcf JCPV |
276 | #define CONFIG_SYS_BR5_PRELIM 0xf8000801 |
277 | #define CONFIG_SYS_OR5_PRELIM 0xff006e65 | |
278 | #define CONFIG_SYS_EPLD_BASE 0xf8000000 | |
279 | #define CONFIG_SYS_LED_DISP_BASE 0xf8000000 | |
280 | #define CONFIG_SYS_USER_SWITCHES_BASE 0xf8100000 | |
281 | #define CONFIG_SYS_BD_REV 0xf8300000 | |
282 | #define CONFIG_SYS_EEPROM_BASE 0xf8b00000 | |
9e3ed392 JH |
283 | |
284 | /* | |
11d5a629 | 285 | * SDRAM on the Local Bus (CS3 and CS4) |
7e44f2b7 PG |
286 | * Note that most boards have a hardware errata where both the |
287 | * LBC SDRAM and the DDR2 SDRAM decode at 0x51, making it impossible | |
288 | * to use CONFIG_DDR_SPD unless you physically remove the LBC DIMM. | |
3e3262bd | 289 | * A hardware workaround is also available, see README.sbc8548 file. |
9e3ed392 | 290 | */ |
6d0f6bcf | 291 | #define CONFIG_SYS_LBC_SDRAM_BASE 0xf0000000 /* Localbus SDRAM */ |
11d5a629 | 292 | #define CONFIG_SYS_LBC_SDRAM_SIZE 128 /* LBC SDRAM is 128MB */ |
9e3ed392 JH |
293 | |
294 | /* | |
11d5a629 | 295 | * Base Register 3 and Option Register 3 configure the 1st 1/2 SDRAM. |
6d0f6bcf | 296 | * The SDRAM base address, CONFIG_SYS_LBC_SDRAM_BASE, is 0xf0000000. |
9e3ed392 JH |
297 | * |
298 | * For BR3, need: | |
299 | * Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0 | |
300 | * port-size = 32-bits = BR2[19:20] = 11 | |
301 | * no parity checking = BR2[21:22] = 00 | |
302 | * SDRAM for MSEL = BR2[24:26] = 011 | |
303 | * Valid = BR[31] = 1 | |
304 | * | |
305 | * 0 4 8 12 16 20 24 28 | |
306 | * 1111 0000 0000 0000 0001 1000 0110 0001 = f0001861 | |
307 | * | |
308 | */ | |
309 | ||
6d0f6bcf | 310 | #define CONFIG_SYS_BR3_PRELIM 0xf0001861 |
9e3ed392 JH |
311 | |
312 | /* | |
11d5a629 | 313 | * The SDRAM size in MB, of 1/2 CONFIG_SYS_LBC_SDRAM_SIZE, is 64. |
9e3ed392 JH |
314 | * |
315 | * For OR3, need: | |
316 | * 64MB mask for AM, OR3[0:7] = 1111 1100 | |
317 | * XAM, OR3[17:18] = 11 | |
318 | * 10 columns OR3[19-21] = 011 | |
319 | * 12 rows OR3[23-25] = 011 | |
320 | * EAD set for extra time OR[31] = 0 | |
321 | * | |
322 | * 0 4 8 12 16 20 24 28 | |
323 | * 1111 1100 0000 0000 0110 1100 1100 0000 = fc006cc0 | |
324 | */ | |
325 | ||
6d0f6bcf | 326 | #define CONFIG_SYS_OR3_PRELIM 0xfc006cc0 |
9e3ed392 | 327 | |
11d5a629 PG |
328 | /* |
329 | * Base Register 4 and Option Register 4 configure the 2nd 1/2 SDRAM. | |
330 | * The base address, (SDRAM_BASE + 1/2*SIZE), is 0xf4000000. | |
331 | * | |
332 | * For BR4, need: | |
333 | * Base address of 0xf4000000 = BR[0:16] = 1111 0100 0000 0000 0 | |
334 | * port-size = 32-bits = BR2[19:20] = 11 | |
335 | * no parity checking = BR2[21:22] = 00 | |
336 | * SDRAM for MSEL = BR2[24:26] = 011 | |
337 | * Valid = BR[31] = 1 | |
338 | * | |
339 | * 0 4 8 12 16 20 24 28 | |
340 | * 1111 0000 0000 0000 0001 1000 0110 0001 = f4001861 | |
341 | * | |
342 | */ | |
343 | ||
344 | #define CONFIG_SYS_BR4_PRELIM 0xf4001861 | |
345 | ||
346 | /* | |
347 | * The SDRAM size in MB, of 1/2 CONFIG_SYS_LBC_SDRAM_SIZE, is 64. | |
348 | * | |
349 | * For OR4, need: | |
350 | * 64MB mask for AM, OR3[0:7] = 1111 1100 | |
351 | * XAM, OR3[17:18] = 11 | |
352 | * 10 columns OR3[19-21] = 011 | |
353 | * 12 rows OR3[23-25] = 011 | |
354 | * EAD set for extra time OR[31] = 0 | |
355 | * | |
356 | * 0 4 8 12 16 20 24 28 | |
357 | * 1111 1100 0000 0000 0110 1100 1100 0000 = fc006cc0 | |
358 | */ | |
359 | ||
360 | #define CONFIG_SYS_OR4_PRELIM 0xfc006cc0 | |
361 | ||
6d0f6bcf JCPV |
362 | #define CONFIG_SYS_LBC_LCRR 0x00000002 /* LB clock ratio reg */ |
363 | #define CONFIG_SYS_LBC_LBCR 0x00000000 /* LB config reg */ | |
364 | #define CONFIG_SYS_LBC_LSRT 0x20000000 /* LB sdram refresh timer */ | |
365 | #define CONFIG_SYS_LBC_MRTPR 0x00000000 /* LB refresh timer prescal*/ | |
9e3ed392 | 366 | |
9e3ed392 JH |
367 | /* |
368 | * Common settings for all Local Bus SDRAM commands. | |
9e3ed392 | 369 | */ |
b0fe93ed | 370 | #define CONFIG_SYS_LBC_LSDMR_COMMON ( LSDMR_RFCR16 \ |
5f4c6f0d PG |
371 | | LSDMR_BSMA1516 \ |
372 | | LSDMR_PRETOACT3 \ | |
373 | | LSDMR_ACTTORW3 \ | |
374 | | LSDMR_BUFCMD \ | |
b0fe93ed | 375 | | LSDMR_BL8 \ |
5f4c6f0d | 376 | | LSDMR_WRC2 \ |
b0fe93ed | 377 | | LSDMR_CL3 \ |
9e3ed392 JH |
378 | ) |
379 | ||
5f4c6f0d PG |
380 | #define CONFIG_SYS_LBC_LSDMR_PCHALL \ |
381 | (CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_PCHALL) | |
382 | #define CONFIG_SYS_LBC_LSDMR_ARFRSH \ | |
383 | (CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_ARFRSH) | |
384 | #define CONFIG_SYS_LBC_LSDMR_MRW \ | |
385 | (CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_OP_MRW) | |
386 | #define CONFIG_SYS_LBC_LSDMR_RFEN \ | |
387 | (CONFIG_SYS_LBC_LSDMR_COMMON | LSDMR_RFEN) | |
388 | ||
6d0f6bcf JCPV |
389 | #define CONFIG_SYS_INIT_RAM_LOCK 1 |
390 | #define CONFIG_SYS_INIT_RAM_ADDR 0xe4010000 /* Initial RAM address */ | |
553f0982 | 391 | #define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in RAM */ |
9e3ed392 | 392 | |
6d0f6bcf | 393 | #define CONFIG_SYS_INIT_L2_ADDR 0xf8f80000 /* relocate boot L2SRAM */ |
9e3ed392 | 394 | |
25ddd1fb | 395 | #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) |
6d0f6bcf | 396 | #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET |
9e3ed392 | 397 | |
dd9ca98f PG |
398 | /* |
399 | * For soldered on flash, (128kB/sector) we use 2 sectors for u-boot and | |
14d0a02a | 400 | * one for env+bootpg (CONFIG_SYS_TEXT_BASE=0xfffa_0000, 384kB total). For SODIMM |
dd9ca98f | 401 | * flash (512kB/sector) we use 1 sector for u-boot, and one for env+bootpg |
14d0a02a | 402 | * (CONFIG_SYS_TEXT_BASE=0xfff0_0000, 1MB total). This dynamically sets the right |
dd9ca98f PG |
403 | * thing for MONITOR_LEN in both cases. |
404 | */ | |
14d0a02a | 405 | #define CONFIG_SYS_MONITOR_LEN (~CONFIG_SYS_TEXT_BASE + 1) |
f0aec4ea | 406 | #define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* Reserved for malloc */ |
9e3ed392 JH |
407 | |
408 | /* Serial Port */ | |
409 | #define CONFIG_CONS_INDEX 1 | |
6d0f6bcf JCPV |
410 | #define CONFIG_SYS_NS16550 |
411 | #define CONFIG_SYS_NS16550_SERIAL | |
412 | #define CONFIG_SYS_NS16550_REG_SIZE 1 | |
2738bc8d | 413 | #define CONFIG_SYS_NS16550_CLK (400000000 / CONFIG_SYS_CLK_DIV) |
9e3ed392 | 414 | |
6d0f6bcf | 415 | #define CONFIG_SYS_BAUDRATE_TABLE \ |
9e3ed392 JH |
416 | {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} |
417 | ||
6d0f6bcf JCPV |
418 | #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) |
419 | #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) | |
9e3ed392 JH |
420 | |
421 | /* Use the HUSH parser */ | |
6d0f6bcf | 422 | #define CONFIG_SYS_HUSH_PARSER |
9e3ed392 JH |
423 | |
424 | /* pass open firmware flat tree */ | |
425 | #define CONFIG_OF_LIBFDT 1 | |
426 | #define CONFIG_OF_BOARD_SETUP 1 | |
427 | #define CONFIG_OF_STDOUT_VIA_ALIAS 1 | |
428 | ||
429 | /* | |
430 | * I2C | |
431 | */ | |
00f792e0 HS |
432 | #define CONFIG_SYS_I2C |
433 | #define CONFIG_SYS_I2C_FSL | |
434 | #define CONFIG_SYS_FSL_I2C_SPEED 400000 | |
435 | #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F | |
436 | #define CONFIG_SYS_FSL_I2C_OFFSET 0x3000 | |
6d0f6bcf | 437 | #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 |
9e3ed392 JH |
438 | |
439 | /* | |
440 | * General PCI | |
441 | * Memory space is mapped 1-1, but I/O space must start from 0. | |
442 | */ | |
fdc7eb90 | 443 | #define CONFIG_SYS_PCI_VIRT 0x80000000 /* 1G PCI TLB */ |
6d0f6bcf | 444 | #define CONFIG_SYS_PCI_PHYS 0x80000000 /* 1G PCI TLB */ |
9e3ed392 | 445 | |
fdc7eb90 PG |
446 | #define CONFIG_SYS_PCI1_MEM_VIRT 0x80000000 |
447 | #define CONFIG_SYS_PCI1_MEM_BUS 0x80000000 | |
448 | #define CONFIG_SYS_PCI1_MEM_PHYS 0x80000000 | |
6d0f6bcf | 449 | #define CONFIG_SYS_PCI1_MEM_SIZE 0x20000000 /* 512M */ |
fdc7eb90 PG |
450 | #define CONFIG_SYS_PCI1_IO_VIRT 0xe2000000 |
451 | #define CONFIG_SYS_PCI1_IO_BUS 0x00000000 | |
452 | #define CONFIG_SYS_PCI1_IO_PHYS 0xe2000000 | |
453 | #define CONFIG_SYS_PCI1_IO_SIZE 0x00800000 /* 8M */ | |
9e3ed392 JH |
454 | |
455 | #ifdef CONFIG_PCIE1 | |
fdc7eb90 PG |
456 | #define CONFIG_SYS_PCIE1_MEM_VIRT 0xa0000000 |
457 | #define CONFIG_SYS_PCIE1_MEM_BUS 0xa0000000 | |
458 | #define CONFIG_SYS_PCIE1_MEM_PHYS 0xa0000000 | |
6d0f6bcf | 459 | #define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ |
fdc7eb90 PG |
460 | #define CONFIG_SYS_PCIE1_IO_VIRT 0xe2800000 |
461 | #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 | |
462 | #define CONFIG_SYS_PCIE1_IO_PHYS 0xe2800000 | |
463 | #define CONFIG_SYS_PCIE1_IO_SIZE 0x00800000 /* 8M */ | |
9e3ed392 JH |
464 | #endif |
465 | ||
466 | #ifdef CONFIG_RIO | |
467 | /* | |
468 | * RapidIO MMU | |
469 | */ | |
6d0f6bcf JCPV |
470 | #define CONFIG_SYS_RIO_MEM_BASE 0xC0000000 |
471 | #define CONFIG_SYS_RIO_MEM_SIZE 0x20000000 /* 512M */ | |
9e3ed392 JH |
472 | #endif |
473 | ||
9e3ed392 JH |
474 | #if defined(CONFIG_PCI) |
475 | ||
9e3ed392 JH |
476 | #define CONFIG_PCI_PNP /* do pci plug-and-play */ |
477 | ||
478 | #undef CONFIG_EEPRO100 | |
479 | #undef CONFIG_TULIP | |
480 | ||
fdc7eb90 | 481 | #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ |
9e3ed392 | 482 | |
9e3ed392 JH |
483 | #endif /* CONFIG_PCI */ |
484 | ||
485 | ||
486 | #if defined(CONFIG_TSEC_ENET) | |
487 | ||
9e3ed392 JH |
488 | #define CONFIG_MII 1 /* MII PHY management */ |
489 | #define CONFIG_TSEC1 1 | |
490 | #define CONFIG_TSEC1_NAME "eTSEC0" | |
491 | #define CONFIG_TSEC2 1 | |
492 | #define CONFIG_TSEC2_NAME "eTSEC1" | |
9e3ed392 JH |
493 | #undef CONFIG_MPC85XX_FEC |
494 | ||
58da8890 PG |
495 | #define TSEC1_PHY_ADDR 0x19 |
496 | #define TSEC2_PHY_ADDR 0x1a | |
9e3ed392 JH |
497 | |
498 | #define TSEC1_PHYIDX 0 | |
499 | #define TSEC2_PHYIDX 0 | |
bd93105f | 500 | |
9e3ed392 JH |
501 | #define TSEC1_FLAGS TSEC_GIGABIT |
502 | #define TSEC2_FLAGS TSEC_GIGABIT | |
9e3ed392 JH |
503 | |
504 | /* Options are: eTSEC[0-3] */ | |
505 | #define CONFIG_ETHPRIME "eTSEC0" | |
506 | #define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */ | |
507 | #endif /* CONFIG_TSEC_ENET */ | |
508 | ||
509 | /* | |
510 | * Environment | |
511 | */ | |
5a1aceb0 | 512 | #define CONFIG_ENV_IS_IN_FLASH 1 |
0e8d1586 | 513 | #define CONFIG_ENV_SIZE 0x2000 |
14d0a02a | 514 | #if CONFIG_SYS_TEXT_BASE == 0xfff00000 /* Boot from 64MB SODIMM */ |
dd9ca98f PG |
515 | #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + 0x80000) |
516 | #define CONFIG_ENV_SECT_SIZE 0x80000 /* 512K(one sector) for env */ | |
14d0a02a | 517 | #elif CONFIG_SYS_TEXT_BASE == 0xfffa0000 /* Boot from 8MB soldered flash */ |
dd9ca98f PG |
518 | #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + 0x40000) |
519 | #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K(one sector) for env */ | |
520 | #else | |
521 | #warning undefined environment size/location. | |
522 | #endif | |
9e3ed392 JH |
523 | |
524 | #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ | |
6d0f6bcf | 525 | #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ |
9e3ed392 JH |
526 | |
527 | /* | |
528 | * BOOTP options | |
529 | */ | |
530 | #define CONFIG_BOOTP_BOOTFILESIZE | |
531 | #define CONFIG_BOOTP_BOOTPATH | |
532 | #define CONFIG_BOOTP_GATEWAY | |
533 | #define CONFIG_BOOTP_HOSTNAME | |
534 | ||
535 | ||
536 | /* | |
537 | * Command line configuration. | |
538 | */ | |
539 | #include <config_cmd_default.h> | |
540 | ||
541 | #define CONFIG_CMD_PING | |
542 | #define CONFIG_CMD_I2C | |
543 | #define CONFIG_CMD_MII | |
544 | #define CONFIG_CMD_ELF | |
199e262e | 545 | #define CONFIG_CMD_REGINFO |
9e3ed392 JH |
546 | |
547 | #if defined(CONFIG_PCI) | |
548 | #define CONFIG_CMD_PCI | |
549 | #endif | |
550 | ||
551 | ||
552 | #undef CONFIG_WATCHDOG /* watchdog disabled */ | |
553 | ||
554 | /* | |
555 | * Miscellaneous configurable options | |
556 | */ | |
ad22f927 | 557 | #define CONFIG_CMDLINE_EDITING /* undef to save memory */ |
5be58f5f | 558 | #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ |
6d0f6bcf JCPV |
559 | #define CONFIG_SYS_LONGHELP /* undef to save memory */ |
560 | #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ | |
9e3ed392 | 561 | #if defined(CONFIG_CMD_KGDB) |
6d0f6bcf | 562 | #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ |
9e3ed392 | 563 | #else |
6d0f6bcf | 564 | #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ |
9e3ed392 | 565 | #endif |
6d0f6bcf JCPV |
566 | #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ |
567 | #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ | |
568 | #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ | |
9e3ed392 JH |
569 | |
570 | /* | |
571 | * For booting Linux, the board info and command line data | |
572 | * have to be in the first 8 MB of memory, since this is | |
573 | * the maximum mapped by the Linux kernel during initialization. | |
574 | */ | |
6d0f6bcf | 575 | #define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/ |
9e3ed392 | 576 | |
9e3ed392 JH |
577 | #if defined(CONFIG_CMD_KGDB) |
578 | #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ | |
9e3ed392 JH |
579 | #endif |
580 | ||
581 | /* | |
582 | * Environment Configuration | |
583 | */ | |
9e3ed392 JH |
584 | #if defined(CONFIG_TSEC_ENET) |
585 | #define CONFIG_HAS_ETH0 | |
9e3ed392 | 586 | #define CONFIG_HAS_ETH1 |
9e3ed392 JH |
587 | #endif |
588 | ||
589 | #define CONFIG_IPADDR 192.168.0.55 | |
590 | ||
591 | #define CONFIG_HOSTNAME sbc8548 | |
8b3637c6 | 592 | #define CONFIG_ROOTPATH "/opt/eldk/ppc_85xx" |
b3f44c21 | 593 | #define CONFIG_BOOTFILE "/uImage" |
9e3ed392 JH |
594 | #define CONFIG_UBOOTPATH /u-boot.bin /* TFTP server */ |
595 | ||
596 | #define CONFIG_SERVERIP 192.168.0.2 | |
597 | #define CONFIG_GATEWAYIP 192.168.0.1 | |
598 | #define CONFIG_NETMASK 255.255.255.0 | |
599 | ||
600 | #define CONFIG_LOADADDR 1000000 /*default location for tftp and bootm*/ | |
601 | ||
602 | #define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ | |
603 | #undef CONFIG_BOOTARGS /* the boot command will set bootargs*/ | |
604 | ||
605 | #define CONFIG_BAUDRATE 115200 | |
606 | ||
607 | #define CONFIG_EXTRA_ENV_SETTINGS \ | |
5368c55d MV |
608 | "netdev=eth0\0" \ |
609 | "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ | |
610 | "tftpflash=tftpboot $loadaddr $uboot; " \ | |
611 | "protect off " __stringify(CONFIG_SYS_TEXT_BASE) " +$filesize; " \ | |
612 | "erase " __stringify(CONFIG_SYS_TEXT_BASE) " +$filesize; " \ | |
613 | "cp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) " $filesize; " \ | |
614 | "protect on " __stringify(CONFIG_SYS_TEXT_BASE) " +$filesize; " \ | |
615 | "cmp.b $loadaddr " __stringify(CONFIG_SYS_TEXT_BASE) " $filesize\0" \ | |
616 | "consoledev=ttyS0\0" \ | |
617 | "ramdiskaddr=2000000\0" \ | |
618 | "ramdiskfile=uRamdisk\0" \ | |
619 | "fdtaddr=c00000\0" \ | |
620 | "fdtfile=sbc8548.dtb\0" | |
9e3ed392 JH |
621 | |
622 | #define CONFIG_NFSBOOTCOMMAND \ | |
623 | "setenv bootargs root=/dev/nfs rw " \ | |
624 | "nfsroot=$serverip:$rootpath " \ | |
625 | "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ | |
626 | "console=$consoledev,$baudrate $othbootargs;" \ | |
627 | "tftp $loadaddr $bootfile;" \ | |
628 | "tftp $fdtaddr $fdtfile;" \ | |
629 | "bootm $loadaddr - $fdtaddr" | |
630 | ||
631 | ||
632 | #define CONFIG_RAMBOOTCOMMAND \ | |
633 | "setenv bootargs root=/dev/ram rw " \ | |
634 | "console=$consoledev,$baudrate $othbootargs;" \ | |
635 | "tftp $ramdiskaddr $ramdiskfile;" \ | |
636 | "tftp $loadaddr $bootfile;" \ | |
637 | "tftp $fdtaddr $fdtfile;" \ | |
638 | "bootm $loadaddr $ramdiskaddr $fdtaddr" | |
639 | ||
640 | #define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND | |
641 | ||
642 | #endif /* __CONFIG_H */ |