[people/ms/u-boot.git] / include / configs / scb9328.h

/*
 * Copyright (C) 2003 ETC s.r.o.
 *
 * SPDX-License-Identifier:	GPL-2.0+
 * Written by Peter Figuli <peposh@etc.sk>, 2003.
 *
 * 2003/13/06 Initial MP10 Support copied from wepep250
 */

#ifndef __CONFIG_H
#define __CONFIG_H

#define CONFIG_IMX		1     /* This is a Motorola MC9328MXL Chip */
#define CONFIG_SCB9328		1     /* on a scb9328tronix board */

#define CONFIG_IMX_SERIAL
#define CONFIG_IMX_SERIAL1
/*
 * Select serial console configuration
 */

/*
 * BOOTP options
 */
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME

/*
 * Command line configuration.
 */
#define CONFIG_CMD_PING
#define CONFIG_CMD_DHCP

/*
 * Boot options. Setting delay to -1 stops autostart count down.
 * NOTE: Sending parameters to kernel depends on kernel version and
 * 2.4.19-rmk6-pxa1 patch used while my u-boot coding didn't accept
 * parameters at all! Do not get confused by them so.
 */
#define CONFIG_BOOTDELAY   -1
#define CONFIG_BOOTARGS	   "console=ttySMX0,115200n8 root=/dev/mtdblock3 rootfstype=jffs2 mtdparts=scb9328_flash:128k(U-boot)ro,128k(U-boot_env),1m(kernel),4m(root),4m(fs) eval_board=evk9328"
#define CONFIG_BOOTCOMMAND "bootm 10040000"
#define CONFIG_SHOW_BOOT_PROGRESS
#define CONFIG_NETMASK		255.255.255.0
#define CONFIG_IPADDR		10.10.10.9
#define CONFIG_SERVERIP		10.10.10.10

/*
 * General options for u-boot. Modify to save memory foot print
 */
#define CONFIG_SYS_LONGHELP				      /* undef saves memory  */
#define CONFIG_SYS_CBSIZE		256		      /* console I/O buffer  */
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* print buffer size   */
#define CONFIG_SYS_MAXARGS		16		      /* max command args    */
#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	      /* boot args buf size  */

#define CONFIG_SYS_MEMTEST_START	0x08100000	      /* memtest test area   */
#define CONFIG_SYS_MEMTEST_END		0x08F00000

#define CONFIG_SYS_CPUSPEED		0x141	     /* core clock - register value  */

#define CONFIG_BAUDRATE 115200
/*
 * Definitions related to passing arguments to kernel.
 */
#define CONFIG_CMDLINE_TAG	     1	 /* send commandline to Kernel	     */
#define CONFIG_SETUP_MEMORY_TAGS     1	 /* send memory definition to kernel */
#define CONFIG_INITRD_TAG	     1	 /* send initrd params		     */

/*
 * Malloc pool need to host env + 128 Kb reserve for other allocations.
 */
#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (128<<10) )

/* SDRAM Setup Values
0x910a8300 Precharge Command CAS 3
0x910a8200 Precharge Command CAS 2

0xa10a8300 AutoRefresh Command CAS 3
0xa10a8200 Set AutoRefresh Command CAS 2 */

#define PRECHARGE_CMD 0x910a8200
#define AUTOREFRESH_CMD 0xa10a8200

/*
 * SDRAM Memory Map
 */
/* SH FIXME */
#define CONFIG_NR_DRAM_BANKS	1		/* we have 1 bank of SDRAM */
#define SCB9328_SDRAM_1		0x08000000	/* SDRAM bank #1	   */
#define SCB9328_SDRAM_1_SIZE	0x01000000	/* 16 MB		   */

#define CONFIG_SYS_TEXT_BASE	0x10000000

#define CONFIG_SYS_SDRAM_BASE	SCB9328_SDRAM_1
#define CONFIG_SYS_INIT_SP_ADDR	(SCB9328_SDRAM_1 + 0xf00000)

/*
 * Configuration for FLASH memory for the Synertronixx board
 */

/* #define SCB9328_FLASH_32M */

/* 32MB */
#ifdef SCB9328_FLASH_32M
#define CONFIG_SYS_MAX_FLASH_BANKS		1	/* FLASH banks count (not chip count)*/
#define CONFIG_SYS_MAX_FLASH_SECT		256	/* number of sector in FLASH bank    */
#define SCB9328_FLASH_BUS_WIDTH		2	/* we use 16 bit FLASH memory...     */
#define SCB9328_FLASH_INTERLEAVE	1	/* ... made of 1 chip		     */
#define SCB9328_FLASH_BANK_SIZE	 0x02000000	/* size of one flash bank	     */
#define SCB9328_FLASH_SECT_SIZE	 0x00020000	/* size of erase sector		     */
#define SCB9328_FLASH_BASE	 0x10000000	/* location of flash memory	     */
#define SCB9328_FLASH_UNLOCK		1	/* perform hw unlock first	     */
#else

/* 16MB */
#define CONFIG_SYS_MAX_FLASH_BANKS		1	/* FLASH banks count (not chip count)*/
#define CONFIG_SYS_MAX_FLASH_SECT		128	/* number of sector in FLASH bank    */
#define SCB9328_FLASH_BUS_WIDTH		2	/* we use 16 bit FLASH memory...     */
#define SCB9328_FLASH_INTERLEAVE	1	/* ... made of 1 chip		     */
#define SCB9328_FLASH_BANK_SIZE	 0x01000000	/* size of one flash bank	     */
#define SCB9328_FLASH_SECT_SIZE	 0x00020000	/* size of erase sector		     */
#define SCB9328_FLASH_BASE	 0x10000000	/* location of flash memory	     */
#define SCB9328_FLASH_UNLOCK		1	/* perform hw unlock first	     */
#endif /* SCB9328_FLASH_32M */

/* This should be defined if CFI FLASH device is present. Actually benefit
   is not so clear to me. In other words we can provide more informations
   to user, but this expects more complex flash handling we do not provide
   now.*/
#undef	CONFIG_SYS_FLASH_CFI

#define CONFIG_SYS_FLASH_ERASE_TOUT	240000    /* timeout for Erase operation */
#define CONFIG_SYS_FLASH_WRITE_TOUT	240000    /* timeout for Write operation */

#define CONFIG_SYS_FLASH_BASE		SCB9328_FLASH_BASE

/*
 * This is setting for JFFS2 support in u-boot.
 * Right now there is no gain for user, but later on booting kernel might be
 * possible. Consider using XIP kernel running from flash to save RAM
 * footprint.
 * NOTE: Enable CONFIG_CMD_JFFS2 for JFFS2 support.
 */
#define CONFIG_SYS_JFFS2_FIRST_BANK		0
#define CONFIG_SYS_JFFS2_FIRST_SECTOR		5
#define CONFIG_SYS_JFFS2_NUM_BANKS		1

/*
 * Environment setup. Definitions of monitor location and size with
 * definition of environment setup ends up in 2 possibilities.
 * 1. Embeded environment - in u-boot code is space for environment
 * 2. Environment is read from predefined sector of flash
 * Right now we support 2. possiblity, but expecting no env placed
 * on mentioned address right now. This also needs to provide whole
 * sector for it - for us 256Kb is really waste of memory. U-boot uses
 * default env. and until kernel parameters could be sent to kernel
 * env. has no sense to us.
 */

/* Setup for PA23 which is Reset Default PA23 but has to become
   CS5 */

#define CONFIG_SYS_GPR_A_VAL		0x00800000
#define CONFIG_SYS_GIUS_A_VAL		0x0043fffe

#define CONFIG_SYS_MONITOR_BASE	0x10000000
#define CONFIG_SYS_MONITOR_LEN		0x20000		/* 128b ( 1 flash sector )  */
#define CONFIG_ENV_IS_IN_FLASH	1
#define CONFIG_ENV_ADDR		0x10020000	/* absolute address for now  */
#define CONFIG_ENV_SIZE		0x20000

#define	 CONFIG_ENV_OVERWRITE  1		/* env is not writable now   */

/*
 * CSxU_VAL:
 * 63| x	x x x | x x x x | x x  x    x | x x x x | x x x x | x x x x | x x x x | x x x x|32
 *   |DTACK_SEL|0|BCD |	  BCS	| PSZ|PME|SYNC|	 DOL	| CNC|	  WSC	    | 0| WWS  |	  EDC  |
 *
 * CSxL_VAL:
 * 31| x x x x | x x x x | x x x x | x x x x | x x x x |  x x x x | x x	 x x | x x  x	 x| 0
 *   |	 OEA   |   OEN	 |   WEA   |   WEN   |	 CSA   |EBC| DSZ  | 0|SP|0|WP| 0 0|PA|CSEN|
 */

#define CONFIG_SYS_CS0U_VAL 0x000F2000
#define CONFIG_SYS_CS0L_VAL 0x11110d01
#define CONFIG_SYS_CS1U_VAL 0x000F0a00
#define CONFIG_SYS_CS1L_VAL 0x11110601
#define CONFIG_SYS_CS2U_VAL 0x0
#define CONFIG_SYS_CS2L_VAL 0x0

#define CONFIG_SYS_CS3U_VAL 0x000FFFFF
#define CONFIG_SYS_CS3L_VAL 0x00000303

#define CONFIG_SYS_CS4U_VAL 0x000F0a00
#define CONFIG_SYS_CS4L_VAL 0x11110301

/* CNC == 3 too long
   #define CONFIG_SYS_CS5U_VAL 0x0000C210 */

/* #define CONFIG_SYS_CS5U_VAL 0x00008400
   mal laenger mahcen, ob der bei 150MHz laenger haelt dann und
   kaum langsamer ist */
/* #define CONFIG_SYS_CS5U_VAL 0x00009400
   #define CONFIG_SYS_CS5L_VAL 0x11010D03 */

#define CONFIG_SYS_CS5U_VAL 0x00008400
#define CONFIG_SYS_CS5L_VAL 0x00000D03

#define CONFIG_DRIVER_DM9000		1
#define CONFIG_DM9000_BASE		0x16000000
#define DM9000_IO			CONFIG_DM9000_BASE
#define DM9000_DATA			(CONFIG_DM9000_BASE+4)

/* f_{dpll}=2*f{ref}*(MFI+MFN/(MFD+1))/(PD+1)
   f_ref=16,777MHz

   0x002a141f: 191,9944MHz
   0x040b2007: 144MHz
   0x042a141f: 96MHz
   0x0811140d: 64MHz
   0x040e200e: 150MHz
   0x00321431: 200MHz

   0x08001800: 64MHz mit 16er Quarz
   0x04001800: 96MHz mit 16er Quarz
   0x04002400: 144MHz mit 16er Quarz

   31 |x x x x|x x x x|x x x x|x x x x|x x x x|x x x x|x x x x|x x x x| 0
      |XXX|--PD---|-------MFD---------|XXX|--MFI--|-----MFN-----------|	    */

#define CPU200

#ifdef CPU200
#define CONFIG_SYS_MPCTL0_VAL 0x00321431
#else
#define CONFIG_SYS_MPCTL0_VAL 0x040e200e
#endif

/* #define BUS64 */
#define BUS72

#ifdef BUS72
#define CONFIG_SYS_SPCTL0_VAL 0x04002400
#endif

#ifdef BUS96
#define CONFIG_SYS_SPCTL0_VAL 0x04001800
#endif

#ifdef BUS64
#define CONFIG_SYS_SPCTL0_VAL 0x08001800
#endif

/* Das ist der BCLK Divider, der aus der System PLL
   BCLK und HCLK erzeugt:
   31 | xxxx xxxx xxxx xxxx xx10 11xx xxxx xxxx | 0
   0x2f008403 : 192MHz/2=96MHz, 144MHz/2=72MHz PRESC=1->BCLKDIV=2
   0x2f008803 : 192MHz/3=64MHz, 240MHz/3=80MHz PRESC=1->BCLKDIV=2
   0x2f001003 : 192MHz/5=38,4MHz
   0x2f000003 : 64MHz/1
   Bit 22: SPLL Restart
   Bit 21: MPLL Restart */

#ifdef BUS64
#define CONFIG_SYS_CSCR_VAL 0x2f030003
#endif

#ifdef BUS72
#define CONFIG_SYS_CSCR_VAL 0x2f030403
#endif

/*
 * Well this has to be defined, but on the other hand it is used differently
 * one may expect. For instance loadb command do not cares :-)
 * So advice is - do not relay on this...
 */
#define CONFIG_SYS_LOAD_ADDR 0x08400000

#define MHZ16QUARZINUSE

#ifdef MHZ16QUARZINUSE
#define CONFIG_SYSPLL_CLK_FREQ 16000000
#else
#define CONFIG_SYSPLL_CLK_FREQ 16780000
#endif

#define CONFIG_SYS_CLK_FREQ 16780000

/* FMCR Bit 0 becomes 0 to make CS3 CS3 :P */
#define CONFIG_SYS_FMCR_VAL 0x00000001

/* Bit[0:3] contain PERCLK1DIV for UART 1
   0x000b00b ->b<- -> 192MHz/12=16MHz
   0x000b00b ->8<- -> 144MHz/09=16MHz
   0x000b00b ->3<- -> 64MHz/4=16MHz */

#ifdef BUS96
#define CONFIG_SYS_PCDR_VAL 0x000b00b5
#endif

#ifdef BUS64
#define CONFIG_SYS_PCDR_VAL 0x000b00b3
#endif

#ifdef BUS72
#define CONFIG_SYS_PCDR_VAL 0x000b00b8
#endif

#endif	/* __CONFIG_H */
Commit	Line	Data
281e00a3 WD	1	/*
	2	* Copyright (C) 2003 ETC s.r.o.
	3	*
1a459660	4	* SPDX-License-Identifier: GPL-2.0+
281e00a3 WD	5	* Written by Peter Figuli <peposh@etc.sk>, 2003.
	6	*
	7	* 2003/13/06 Initial MP10 Support copied from wepep250
	8	*/
	9
	10	#ifndef __CONFIG_H
	11	#define __CONFIG_H
	12
f2168440	13	#define CONFIG_IMX 1 /* This is a Motorola MC9328MXL Chip */
281e00a3	14	#define CONFIG_SCB9328 1 /* on a scb9328tronix board */
281e00a3	15
d3e55d07	16	#define CONFIG_IMX_SERIAL
281e00a3 WD	17	#define CONFIG_IMX_SERIAL1
	18	/*
	19	* Select serial console configuration
	20	*/
	21
079a136c JL	22	/*
	23	* BOOTP options
	24	*/
	25	#define CONFIG_BOOTP_BOOTFILESIZE
	26	#define CONFIG_BOOTP_BOOTPATH
	27	#define CONFIG_BOOTP_GATEWAY
	28	#define CONFIG_BOOTP_HOSTNAME
	29
281e00a3	30	/*
46da1e96	31	* Command line configuration.
281e00a3	32	*/
46da1e96 JL	33	#define CONFIG_CMD_PING
	34	#define CONFIG_CMD_DHCP
	35
281e00a3 WD	36	/*
	37	* Boot options. Setting delay to -1 stops autostart count down.
	38	* NOTE: Sending parameters to kernel depends on kernel version and
	39	* 2.4.19-rmk6-pxa1 patch used while my u-boot coding didn't accept
	40	* parameters at all! Do not get confused by them so.
	41	*/
	42	#define CONFIG_BOOTDELAY -1
	43	#define CONFIG_BOOTARGS "console=ttySMX0,115200n8 root=/dev/mtdblock3 rootfstype=jffs2 mtdparts=scb9328_flash:128k(U-boot)ro,128k(U-boot_env),1m(kernel),4m(root),4m(fs) eval_board=evk9328"
	44	#define CONFIG_BOOTCOMMAND "bootm 10040000"
	45	#define CONFIG_SHOW_BOOT_PROGRESS
281e00a3 WD	46	#define CONFIG_NETMASK 255.255.255.0
	47	#define CONFIG_IPADDR 10.10.10.9
	48	#define CONFIG_SERVERIP 10.10.10.10
	49
	50	/*
	51	* General options for u-boot. Modify to save memory foot print
	52	*/
6d0f6bcf	53	#define CONFIG_SYS_LONGHELP /* undef saves memory */
6d0f6bcf JCPV	54	#define CONFIG_SYS_CBSIZE 256 /* console I/O buffer */
	55	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* print buffer size */
	56	#define CONFIG_SYS_MAXARGS 16 /* max command args */
	57	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* boot args buf size */
281e00a3	58
6d0f6bcf JCPV	59	#define CONFIG_SYS_MEMTEST_START 0x08100000 /* memtest test area */
6d0f6bcf JCPV	60	#define CONFIG_SYS_MEMTEST_END 0x08F00000
281e00a3	61
6d0f6bcf	62	#define CONFIG_SYS_CPUSPEED 0x141 /* core clock - register value */
281e00a3	63
281e00a3 WD	64	#define CONFIG_BAUDRATE 115200
	65	/*
	66	* Definitions related to passing arguments to kernel.
	67	*/
	68	#define CONFIG_CMDLINE_TAG 1 /* send commandline to Kernel */
	69	#define CONFIG_SETUP_MEMORY_TAGS 1 /* send memory definition to kernel */
	70	#define CONFIG_INITRD_TAG 1 /* send initrd params */
281e00a3	71
281e00a3 WD	72	/*
	73	* Malloc pool need to host env + 128 Kb reserve for other allocations.
	74	*/
6d0f6bcf	75	#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128<<10) )
281e00a3	76
281e00a3 WD	77	/* SDRAM Setup Values
	78	0x910a8300 Precharge Command CAS 3
	79	0x910a8200 Precharge Command CAS 2
	80
	81	0xa10a8300 AutoRefresh Command CAS 3
	82	0xa10a8200 Set AutoRefresh Command CAS 2 */
	83
	84	#define PRECHARGE_CMD 0x910a8200
	85	#define AUTOREFRESH_CMD 0xa10a8200
281e00a3 WD	86
	87	/*
	88	* SDRAM Memory Map
	89	*/
	90	/* SH FIXME */
	91	#define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of SDRAM */
	92	#define SCB9328_SDRAM_1 0x08000000 /* SDRAM bank #1 */
	93	#define SCB9328_SDRAM_1_SIZE 0x01000000 /* 16 MB */
	94
386393c6 TK	95	#define CONFIG_SYS_TEXT_BASE 0x10000000
	96
	97	#define CONFIG_SYS_SDRAM_BASE SCB9328_SDRAM_1
	98	#define CONFIG_SYS_INIT_SP_ADDR (SCB9328_SDRAM_1 + 0xf00000)
	99
281e00a3 WD	100	/*
	101	* Configuration for FLASH memory for the Synertronixx board
	102	*/
	103
	104	/* #define SCB9328_FLASH_32M */
	105
	106	/* 32MB */
	107	#ifdef SCB9328_FLASH_32M
6d0f6bcf JCPV	108	#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* FLASH banks count (not chip count)*/
6d0f6bcf JCPV	109	#define CONFIG_SYS_MAX_FLASH_SECT 256 /* number of sector in FLASH bank */
281e00a3 WD	110	#define SCB9328_FLASH_BUS_WIDTH 2 /* we use 16 bit FLASH memory... */
	111	#define SCB9328_FLASH_INTERLEAVE 1 /* ... made of 1 chip */
	112	#define SCB9328_FLASH_BANK_SIZE 0x02000000 /* size of one flash bank */
	113	#define SCB9328_FLASH_SECT_SIZE 0x00020000 /* size of erase sector */
	114	#define SCB9328_FLASH_BASE 0x10000000 /* location of flash memory */
	115	#define SCB9328_FLASH_UNLOCK 1 /* perform hw unlock first */
	116	#else
	117
	118	/* 16MB */
6d0f6bcf JCPV	119	#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* FLASH banks count (not chip count)*/
6d0f6bcf JCPV	120	#define CONFIG_SYS_MAX_FLASH_SECT 128 /* number of sector in FLASH bank */
281e00a3 WD	121	#define SCB9328_FLASH_BUS_WIDTH 2 /* we use 16 bit FLASH memory... */
	122	#define SCB9328_FLASH_INTERLEAVE 1 /* ... made of 1 chip */
	123	#define SCB9328_FLASH_BANK_SIZE 0x01000000 /* size of one flash bank */
	124	#define SCB9328_FLASH_SECT_SIZE 0x00020000 /* size of erase sector */
	125	#define SCB9328_FLASH_BASE 0x10000000 /* location of flash memory */
	126	#define SCB9328_FLASH_UNLOCK 1 /* perform hw unlock first */
	127	#endif /* SCB9328_FLASH_32M */
	128
	129	/* This should be defined if CFI FLASH device is present. Actually benefit
	130	is not so clear to me. In other words we can provide more informations
	131	to user, but this expects more complex flash handling we do not provide
	132	now.*/
6d0f6bcf	133	#undef CONFIG_SYS_FLASH_CFI
281e00a3	134
f90aea2a MV	135	#define CONFIG_SYS_FLASH_ERASE_TOUT 240000 /* timeout for Erase operation */
f90aea2a MV	136	#define CONFIG_SYS_FLASH_WRITE_TOUT 240000 /* timeout for Write operation */
281e00a3	137
6d0f6bcf	138	#define CONFIG_SYS_FLASH_BASE SCB9328_FLASH_BASE
281e00a3 WD	139
	140	/*
	141	* This is setting for JFFS2 support in u-boot.
	142	* Right now there is no gain for user, but later on booting kernel might be
	143	* possible. Consider using XIP kernel running from flash to save RAM
	144	* footprint.
079a136c	145	* NOTE: Enable CONFIG_CMD_JFFS2 for JFFS2 support.
281e00a3	146	*/
6d0f6bcf JCPV	147	#define CONFIG_SYS_JFFS2_FIRST_BANK 0
	148	#define CONFIG_SYS_JFFS2_FIRST_SECTOR 5
	149	#define CONFIG_SYS_JFFS2_NUM_BANKS 1
281e00a3 WD	150
	151	/*
	152	* Environment setup. Definitions of monitor location and size with
	153	* definition of environment setup ends up in 2 possibilities.
	154	* 1. Embeded environment - in u-boot code is space for environment
	155	* 2. Environment is read from predefined sector of flash
	156	* Right now we support 2. possiblity, but expecting no env placed
	157	* on mentioned address right now. This also needs to provide whole
	158	* sector for it - for us 256Kb is really waste of memory. U-boot uses
	159	* default env. and until kernel parameters could be sent to kernel
	160	* env. has no sense to us.
	161	*/
	162
	163	/* Setup for PA23 which is Reset Default PA23 but has to become
	164	CS5 */
	165
6d0f6bcf JCPV	166	#define CONFIG_SYS_GPR_A_VAL 0x00800000
6d0f6bcf JCPV	167	#define CONFIG_SYS_GIUS_A_VAL 0x0043fffe
281e00a3	168
6d0f6bcf JCPV	169	#define CONFIG_SYS_MONITOR_BASE 0x10000000
6d0f6bcf JCPV	170	#define CONFIG_SYS_MONITOR_LEN 0x20000 /* 128b ( 1 flash sector ) */
5a1aceb0	171	#define CONFIG_ENV_IS_IN_FLASH 1
0e8d1586 JCPV	172	#define CONFIG_ENV_ADDR 0x10020000 /* absolute address for now */
0e8d1586 JCPV	173	#define CONFIG_ENV_SIZE 0x20000
281e00a3 WD	174
	175	#define CONFIG_ENV_OVERWRITE 1 /* env is not writable now */
	176
	177	/*
	178	* CSxU_VAL:
	179	* 63\| x x x x \| x x x x \| x x x x \| x x x x \| x x x x \| x x x x \| x x x x \| x x x x\|32
	180	* \|DTACK_SEL\|0\|BCD \| BCS \| PSZ\|PME\|SYNC\| DOL \| CNC\| WSC \| 0\| WWS \| EDC \|
	181	*
	182	* CSxL_VAL:
	183	* 31\| x x x x \| x x x x \| x x x x \| x x x x \| x x x x \| x x x x \| x x x x \| x x x x\| 0
	184	* \| OEA \| OEN \| WEA \| WEN \| CSA \|EBC\| DSZ \| 0\|SP\|0\|WP\| 0 0\|PA\|CSEN\|
	185	*/
	186
6d0f6bcf JCPV	187	#define CONFIG_SYS_CS0U_VAL 0x000F2000
	188	#define CONFIG_SYS_CS0L_VAL 0x11110d01
	189	#define CONFIG_SYS_CS1U_VAL 0x000F0a00
	190	#define CONFIG_SYS_CS1L_VAL 0x11110601
	191	#define CONFIG_SYS_CS2U_VAL 0x0
	192	#define CONFIG_SYS_CS2L_VAL 0x0
281e00a3	193
6d0f6bcf JCPV	194	#define CONFIG_SYS_CS3U_VAL 0x000FFFFF
6d0f6bcf JCPV	195	#define CONFIG_SYS_CS3L_VAL 0x00000303
281e00a3	196
6d0f6bcf JCPV	197	#define CONFIG_SYS_CS4U_VAL 0x000F0a00
6d0f6bcf JCPV	198	#define CONFIG_SYS_CS4L_VAL 0x11110301
281e00a3 WD	199
281e00a3 WD	200	/* CNC == 3 too long
6d0f6bcf	201	#define CONFIG_SYS_CS5U_VAL 0x0000C210 */
281e00a3	202
6d0f6bcf	203	/* #define CONFIG_SYS_CS5U_VAL 0x00008400
281e00a3 WD	204	mal laenger mahcen, ob der bei 150MHz laenger haelt dann und
281e00a3 WD	205	kaum langsamer ist */
6d0f6bcf JCPV	206	/* #define CONFIG_SYS_CS5U_VAL 0x00009400
6d0f6bcf JCPV	207	#define CONFIG_SYS_CS5L_VAL 0x11010D03 */
281e00a3	208
6d0f6bcf JCPV	209	#define CONFIG_SYS_CS5U_VAL 0x00008400
6d0f6bcf JCPV	210	#define CONFIG_SYS_CS5L_VAL 0x00000D03
281e00a3	211
281e00a3 WD	212	#define CONFIG_DRIVER_DM9000 1
	213	#define CONFIG_DM9000_BASE 0x16000000
	214	#define DM9000_IO CONFIG_DM9000_BASE
	215	#define DM9000_DATA (CONFIG_DM9000_BASE+4)
281e00a3 WD	216
	217	/* f_{dpll}=2f{ref}(MFI+MFN/(MFD+1))/(PD+1)
	218	f_ref=16,777MHz
	219
	220	0x002a141f: 191,9944MHz
	221	0x040b2007: 144MHz
	222	0x042a141f: 96MHz
	223	0x0811140d: 64MHz
	224	0x040e200e: 150MHz
	225	0x00321431: 200MHz
	226
	227	0x08001800: 64MHz mit 16er Quarz
	228	0x04001800: 96MHz mit 16er Quarz
	229	0x04002400: 144MHz mit 16er Quarz
	230
	231	31 \|x x x x\|x x x x\|x x x x\|x x x x\|x x x x\|x x x x\|x x x x\|x x x x\| 0
	232	\|XXX\|--PD---\|-------MFD---------\|XXX\|--MFI--\|-----MFN-----------\| */
	233
	234	#define CPU200
	235
	236	#ifdef CPU200
6d0f6bcf	237	#define CONFIG_SYS_MPCTL0_VAL 0x00321431
281e00a3	238	#else
6d0f6bcf	239	#define CONFIG_SYS_MPCTL0_VAL 0x040e200e
281e00a3 WD	240	#endif
	241
	242	/* #define BUS64 */
	243	#define BUS72
	244
	245	#ifdef BUS72
6d0f6bcf	246	#define CONFIG_SYS_SPCTL0_VAL 0x04002400
281e00a3 WD	247	#endif
	248
	249	#ifdef BUS96
6d0f6bcf	250	#define CONFIG_SYS_SPCTL0_VAL 0x04001800
281e00a3 WD	251	#endif
	252
	253	#ifdef BUS64
6d0f6bcf	254	#define CONFIG_SYS_SPCTL0_VAL 0x08001800
281e00a3 WD	255	#endif
	256
	257	/* Das ist der BCLK Divider, der aus der System PLL
	258	BCLK und HCLK erzeugt:
	259	31 \| xxxx xxxx xxxx xxxx xx10 11xx xxxx xxxx \| 0
	260	0x2f008403 : 192MHz/2=96MHz, 144MHz/2=72MHz PRESC=1->BCLKDIV=2
	261	0x2f008803 : 192MHz/3=64MHz, 240MHz/3=80MHz PRESC=1->BCLKDIV=2
	262	0x2f001003 : 192MHz/5=38,4MHz
	263	0x2f000003 : 64MHz/1
	264	Bit 22: SPLL Restart
	265	Bit 21: MPLL Restart */
	266
	267	#ifdef BUS64
6d0f6bcf	268	#define CONFIG_SYS_CSCR_VAL 0x2f030003
281e00a3 WD	269	#endif
	270
	271	#ifdef BUS72
6d0f6bcf	272	#define CONFIG_SYS_CSCR_VAL 0x2f030403
281e00a3 WD	273	#endif
	274
	275	/*
	276	* Well this has to be defined, but on the other hand it is used differently
	277	* one may expect. For instance loadb command do not cares :-)
	278	* So advice is - do not relay on this...
	279	*/
6d0f6bcf	280	#define CONFIG_SYS_LOAD_ADDR 0x08400000
281e00a3 WD	281
	282	#define MHZ16QUARZINUSE
	283
	284	#ifdef MHZ16QUARZINUSE
	285	#define CONFIG_SYSPLL_CLK_FREQ 16000000
	286	#else
	287	#define CONFIG_SYSPLL_CLK_FREQ 16780000
	288	#endif
	289
	290	#define CONFIG_SYS_CLK_FREQ 16780000
	291
	292	/* FMCR Bit 0 becomes 0 to make CS3 CS3 :P */
6d0f6bcf	293	#define CONFIG_SYS_FMCR_VAL 0x00000001
281e00a3 WD	294
	295	/* Bit[0:3] contain PERCLK1DIV for UART 1
	296	0x000b00b ->b<- -> 192MHz/12=16MHz
	297	0x000b00b ->8<- -> 144MHz/09=16MHz
	298	0x000b00b ->3<- -> 64MHz/4=16MHz */
	299
	300	#ifdef BUS96
6d0f6bcf	301	#define CONFIG_SYS_PCDR_VAL 0x000b00b5
281e00a3 WD	302	#endif
	303
	304	#ifdef BUS64
6d0f6bcf	305	#define CONFIG_SYS_PCDR_VAL 0x000b00b3
281e00a3 WD	306	#endif
	307
	308	#ifdef BUS72
6d0f6bcf	309	#define CONFIG_SYS_PCDR_VAL 0x000b00b8
281e00a3 WD	310	#endif
	311
	312	#endif /* __CONFIG_H */