[people/ms/u-boot.git] / include / configs / snowball.h

/*
 * Copyright (C) ST-Ericsson SA 2009
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __CONFIG_H
#define __CONFIG_H

/*
 * #define DEBUG 1
 */

#define CONFIG_SKIP_LOWLEVEL_INIT
#define CONFIG_SNOWBALL
#define CONFIG_SYS_ICACHE_OFF
#define CONFIG_SYS_DCACHE_OFF
#define CONFIG_ARCH_CPU_INIT
#define CONFIG_BOARD_LATE_INIT

/*
 * High Level Configuration Options
 * (easy to change)
 */
#define CONFIG_U8500

#define CONFIG_SYS_MEMTEST_START	0x00000000
#define CONFIG_SYS_MEMTEST_END	0x1FFFFFFF

/*-----------------------------------------------------------------------
 * Size of environment and malloc() pool
 */
/*
 * If you use U-Boot as crash kernel, make sure that it does not overwrite
 * information saved by kexec during panic. Kexec expects the start
 * address of the executable 32K above "crashkernel" address.
 */
/*
 * Size of malloc() pool
 */
#define CONFIG_ENV_SIZE		(8*1024)
#define CONFIG_SYS_MALLOC_LEN	(CONFIG_ENV_SIZE + 256*1024)

#define CONFIG_ENV_IS_IN_MMC
#define CONFIG_CMD_ENV
#define CONFIG_CMD_SAVEENV
#define CONFIG_ENV_OFFSET		0x0118000
#define CONFIG_SYS_MMC_ENV_DEV          0              /* SLOT2: eMMC */

/*
 * PL011 Configuration
 */
#define CONFIG_PL011_SERIAL
#define CONFIG_PL011_SERIAL_RLCR
#define CONFIG_PL011_SERIAL_FLUSH_ON_INIT

/*
 * U8500 UART registers base for 3 serial devices
 */
#define CFG_UART0_BASE		0x80120000
#define CFG_UART1_BASE		0x80121000
#define CFG_UART2_BASE		0x80007000
#define CFG_SERIAL0		CFG_UART0_BASE
#define CFG_SERIAL1		CFG_UART1_BASE
#define CFG_SERIAL2		CFG_UART2_BASE
#define CONFIG_PL011_CLOCK	38400000
#define CONFIG_PL01x_PORTS	{ (void *)CFG_SERIAL0, (void *)CFG_SERIAL1, \
				  (void *)CFG_SERIAL2 }
#define CONFIG_CONS_INDEX	2
#define CONFIG_BAUDRATE		115200

/*
 * Devices and file systems
 */
#define CONFIG_MMC
#define CONFIG_GENERIC_MMC
#define CONFIG_DOS_PARTITION

/*
 * Commands
 */
#define CONFIG_CMD_MEMORY
#define CONFIG_CMD_BOOTD
#define CONFIG_CMD_BDI
#define CONFIG_CMD_IMI
#define CONFIG_CMD_MISC
#define CONFIG_CMD_RUN
#define CONFIG_CMD_ECHO
#define CONFIG_CMD_CONSOLE
#define CONFIG_CMD_LOADS
#define CONFIG_CMD_LOADB
#define CONFIG_CMD_MMC
#define CONFIG_CMD_FAT
#define CONFIG_CMD_EXT2
#define CONFIG_CMD_SOURCE

#ifndef CONFIG_BOOTDELAY
#define CONFIG_BOOTDELAY	1
#endif
#define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */

#undef CONFIG_BOOTARGS
#define CONFIG_BOOTCOMMAND \
"mmc dev 1; "								\
	"if run loadbootscript; "					\
		"then run bootscript; "					\
	"else "								\
		"if run mmcload; "					\
			"then run mmcboot; "				\
		"else "							\
			"mmc dev 0; "					\
			"if run emmcloadbootscript; "			\
				"then run bootscript; "			\
			"else "						\
				"if run emmcload; "			\
					"then run emmcboot; "		\
				"else "					\
					"echo No media to boot from; "	\
				"fi; "					\
			"fi; "						\
		"fi; "							\
	"fi; "

#define CONFIG_EXTRA_ENV_SETTINGS \
	"verify=n\0"							\
	"loadaddr=0x00100000\0"						\
	"console=ttyAMA2,115200n8\0"					\
	"loadbootscript=fatload mmc 1:1 ${loadaddr} boot.scr\0"		\
	"emmcloadbootscript=fatload mmc 0:2 ${loadaddr} boot.scr\0"	\
	"bootscript=echo Running bootscript "				\
		"from mmc ...; source ${loadaddr}\0"			\
	"memargs256=mem=96M@0 mem_modem=32M@96M mem=32M@128M "		\
		"hwmem=22M@160M pmem_hwb=42M@182M mem_mali=32@224M\0"	\
	"memargs512=mem=96M@0 mem_modem=32M@96M hwmem=32M@128M "	\
		"mem=64M@160M mem_mali=32M@224M "			\
		"pmem_hwb=128M@256M mem=128M@384M\0"			\
	"memargs1024=mem=128M@0 mali.mali_mem=32M@128M "		\
		"hwmem=168M@M160M mem=48M@328M "			\
		"mem_issw=1M@383M mem=640M@384M\0"			\
	"memargs=setenv bootargs ${bootargs} ${memargs1024}\0"		\
	"emmcload=fatload mmc 0:2 ${loadaddr} uImage\0"			\
	"mmcload=fatload mmc 1:1 ${loadaddr} uImage\0"			\
	"commonargs=setenv bootargs console=${console} "		\
	"vmalloc=300M\0"						\
	"emmcargs=setenv bootargs ${bootargs} "				\
		"root=/dev/mmcblk0p3 "					\
		"rootwait\0"						\
	"addcons=setenv bootargs ${bootargs} "				\
		"console=${console}\0"					\
	"emmcboot=echo Booting from eMMC ...; "				\
		"run commonargs emmcargs memargs; "			\
		"bootm ${loadaddr}\0"					\
	"mmcargs=setenv bootargs ${bootargs} "				\
		"root=/dev/mmcblk1p2 "					\
		"rootwait earlyprintk\0"				\
	"mmcboot=echo Booting from external MMC ...; "			\
		"run commonargs mmcargs memargs; "			\
		"bootm ${loadaddr}\0"					\
	"fdt_high=0x2BC00000\0"						\
	"stdout=serial,usbtty\0"					\
	"stdin=serial,usbtty\0"						\
	"stderr=serial,usbtty\0"

/*-----------------------------------------------------------------------
 * Miscellaneous configurable options
 */

#define CONFIG_SYS_LONGHELP			/* undef to save memory     */
#define CONFIG_SYS_PROMPT	"U8500 $ "	/* Monitor Command Prompt   */
#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size  */

/* Print Buffer Size */
#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE \
					+ sizeof(CONFIG_SYS_PROMPT) + 16)
#define CONFIG_SYS_MAXARGS	32	/* max number of command args */
#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE /* Boot Arg Buffer Size */

#define CONFIG_SYS_LOAD_ADDR		0x00100000 /* default load address */
#define CONFIG_SYS_LOADS_BAUD_CHANGE	1

#define CONFIG_SYS_HUSH_PARSER		1
#define CONFIG_CMDLINE_EDITING

#define CONFIG_SETUP_MEMORY_TAGS	2
#define CONFIG_INITRD_TAG		1
#define CONFIG_CMDLINE_TAG		1	/* enable passing of ATAGs  */

/*
 * Physical Memory Map
 */
#define CONFIG_NR_DRAM_BANKS		1
#define PHYS_SDRAM_1			0x00000000	/* DDR-SDRAM Bank #1 */

/*
 * additions for new relocation code
 */
#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
#define CONFIG_SYS_MAX_RAM_SIZE	0x40000000
#define CONFIG_SYS_INIT_RAM_SIZE	0x100000
#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_SDRAM_BASE + \
					 CONFIG_SYS_INIT_RAM_SIZE - \
					 GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR		CONFIG_SYS_GBL_DATA_OFFSET

/* landing address before relocation */
#ifndef CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_TEXT_BASE            0x0
#endif

/*
 * MMC related configs
 */
#define CONFIG_ARM_PL180_MMCI
#define MMC_BLOCK_SIZE			512
#define CFG_EMMC_BASE                   0x80114000
#define CFG_MMC_BASE                    0x80126000

/*
 * FLASH and environment organization
 */
#define CONFIG_SYS_NO_FLASH

/*
 * base register values for U8500
 */
#define CFG_PRCMU_BASE		0x80157000	/* Power, reset and clock */


/*
 * U8500 GPIO register base for 9 banks
 */
#define CONFIG_DB8500_GPIO
#define CFG_GPIO_0_BASE			0x8012E000
#define CFG_GPIO_1_BASE			0x8012E080
#define CFG_GPIO_2_BASE			0x8000E000
#define CFG_GPIO_3_BASE			0x8000E080
#define CFG_GPIO_4_BASE			0x8000E100
#define CFG_GPIO_5_BASE			0x8000E180
#define CFG_GPIO_6_BASE			0x8011E000
#define CFG_GPIO_7_BASE			0x8011E080
#define CFG_GPIO_8_BASE			0xA03FE000

#define CFG_FSMC_BASE		0x80000000	/* FSMC Controller */

#endif	/* __CONFIG_H */
Commit	Line	Data
84dee301 MP	1	/*
	2	* Copyright (C) ST-Ericsson SA 2009
	3	*
1a459660	4	* SPDX-License-Identifier: GPL-2.0+
84dee301 MP	5	*/
	6
	7	#ifndef __CONFIG_H
	8	#define __CONFIG_H
	9
	10	/*
	11	* #define DEBUG 1
	12	*/
	13
	14	#define CONFIG_SKIP_LOWLEVEL_INIT
	15	#define CONFIG_SNOWBALL
	16	#define CONFIG_SYS_ICACHE_OFF
	17	#define CONFIG_SYS_DCACHE_OFF
9652de7c	18	#define CONFIG_ARCH_CPU_INIT
b95f9ec7	19	#define CONFIG_BOARD_LATE_INIT
84dee301 MP	20
	21	/*
	22	* High Level Configuration Options
	23	* (easy to change)
	24	*/
	25	#define CONFIG_U8500
84dee301 MP	26
	27	#define CONFIG_SYS_MEMTEST_START 0x00000000
	28	#define CONFIG_SYS_MEMTEST_END 0x1FFFFFFF
84dee301 MP	29
	30	/*-----------------------------------------------------------------------
	31	* Size of environment and malloc() pool
	32	*/
	33	/*
	34	* If you use U-Boot as crash kernel, make sure that it does not overwrite
	35	* information saved by kexec during panic. Kexec expects the start
	36	* address of the executable 32K above "crashkernel" address.
	37	*/
	38	/*
	39	* Size of malloc() pool
	40	*/
	41	#define CONFIG_ENV_SIZE (8*1024)
	42	#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 256*1024)
	43
84dee301 MP	44	#define CONFIG_ENV_IS_IN_MMC
	45	#define CONFIG_CMD_ENV
	46	#define CONFIG_CMD_SAVEENV
	47	#define CONFIG_ENV_OFFSET 0x0118000
	48	#define CONFIG_SYS_MMC_ENV_DEV 0 /* SLOT2: eMMC */
	49
	50	/*
	51	* PL011 Configuration
	52	*/
	53	#define CONFIG_PL011_SERIAL
	54	#define CONFIG_PL011_SERIAL_RLCR
	55	#define CONFIG_PL011_SERIAL_FLUSH_ON_INIT
	56
	57	/*
	58	* U8500 UART registers base for 3 serial devices
	59	*/
	60	#define CFG_UART0_BASE 0x80120000
	61	#define CFG_UART1_BASE 0x80121000
	62	#define CFG_UART2_BASE 0x80007000
	63	#define CFG_SERIAL0 CFG_UART0_BASE
	64	#define CFG_SERIAL1 CFG_UART1_BASE
	65	#define CFG_SERIAL2 CFG_UART2_BASE
	66	#define CONFIG_PL011_CLOCK 38400000
	67	#define CONFIG_PL01x_PORTS { (void )CFG_SERIAL0, (void )CFG_SERIAL1, \
	68	(void *)CFG_SERIAL2 }
	69	#define CONFIG_CONS_INDEX 2
	70	#define CONFIG_BAUDRATE 115200
	71
	72	/*
	73	* Devices and file systems
	74	*/
	75	#define CONFIG_MMC
	76	#define CONFIG_GENERIC_MMC
	77	#define CONFIG_DOS_PARTITION
	78
	79	/*
	80	* Commands
	81	*/
	82	#define CONFIG_CMD_MEMORY
	83	#define CONFIG_CMD_BOOTD
	84	#define CONFIG_CMD_BDI
	85	#define CONFIG_CMD_IMI
	86	#define CONFIG_CMD_MISC
	87	#define CONFIG_CMD_RUN
	88	#define CONFIG_CMD_ECHO
	89	#define CONFIG_CMD_CONSOLE
	90	#define CONFIG_CMD_LOADS
	91	#define CONFIG_CMD_LOADB
	92	#define CONFIG_CMD_MMC
	93	#define CONFIG_CMD_FAT
	94	#define CONFIG_CMD_EXT2
	95	#define CONFIG_CMD_SOURCE
	96
	97	#ifndef CONFIG_BOOTDELAY
	98	#define CONFIG_BOOTDELAY 1
	99	#endif
	100	#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
	101
	102	#undef CONFIG_BOOTARGS
	103	#define CONFIG_BOOTCOMMAND \
	104	"mmc dev 1; " \
	105	"if run loadbootscript; " \
	106	"then run bootscript; " \
	107	"else " \
108	"if run mmcload; " \
109	"then run mmcboot; " \
110	"else " \
111	"mmc dev 0; " \
112	"if run emmcloadbootscript; " \
113	"then run bootscript; " \
114	"else " \
115	"if run emmcload; " \
116	"then run emmcboot; " \
117	"else " \
118	"echo No media to boot from; " \
119	"fi; " \
120	"fi; " \
121	"fi; " \
122	"fi; "
123
124	#define CONFIG_EXTRA_ENV_SETTINGS \
125	"verify=n\0" \
126	"loadaddr=0x00100000\0" \
127	"console=ttyAMA2,115200n8\0" \
128	"loadbootscript=fatload mmc 1:1 ${loadaddr} boot.scr\0" \
129	"emmcloadbootscript=fatload mmc 0:2 ${loadaddr} boot.scr\0" \
130	"bootscript=echo Running bootscript " \
131	"from mmc ...; source ${loadaddr}\0" \
132	"memargs256=mem=96M@0 mem_modem=32M@96M mem=32M@128M " \
133	"hwmem=22M@160M pmem_hwb=42M@182M mem_mali=32@224M\0" \
134	"memargs512=mem=96M@0 mem_modem=32M@96M hwmem=32M@128M " \
135	"mem=64M@160M mem_mali=32M@224M " \
136	"pmem_hwb=128M@256M mem=128M@384M\0" \
137	"memargs1024=mem=128M@0 mali.mali_mem=32M@128M " \
138	"hwmem=168M@M160M mem=48M@328M " \
139	"mem_issw=1M@383M mem=640M@384M\0" \
140	"memargs=setenv bootargs ${bootargs} ${memargs1024}\0" \
141	"emmcload=fatload mmc 0:2 ${loadaddr} uImage\0" \
142	"mmcload=fatload mmc 1:1 ${loadaddr} uImage\0" \
143	"commonargs=setenv bootargs console=${console} " \
144	"vmalloc=300M\0" \
145	"emmcargs=setenv bootargs ${bootargs} " \
146	"root=/dev/mmcblk0p3 " \
147	"rootwait\0" \
148	"addcons=setenv bootargs ${bootargs} " \
149	"console=${console}\0" \
150	"emmcboot=echo Booting from eMMC ...; " \
151	"run commonargs emmcargs memargs; " \
152	"bootm ${loadaddr}\0" \
153	"mmcargs=setenv bootargs ${bootargs} " \
154	"root=/dev/mmcblk1p2 " \
155	"rootwait earlyprintk\0" \
156	"mmcboot=echo Booting from external MMC ...; " \
157	"run commonargs mmcargs memargs; " \
158	"bootm ${loadaddr}\0" \
159	"fdt_high=0x2BC00000\0" \
160	"stdout=serial,usbtty\0" \
161	"stdin=serial,usbtty\0" \
162	"stderr=serial,usbtty\0"
163
164	/*-----------------------------------------------------------------------
165	* Miscellaneous configurable options
166	*/
167
168	#define CONFIG_SYS_LONGHELP /* undef to save memory */
169	#define CONFIG_SYS_PROMPT "U8500 $ " /* Monitor Command Prompt */
170	#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
171
172	/* Print Buffer Size */
173	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \
174	+ sizeof(CONFIG_SYS_PROMPT) + 16)
175	#define CONFIG_SYS_MAXARGS 32 /* max number of command args */
176	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Arg Buffer Size */
177
84dee301 MP	178	#define CONFIG_SYS_LOAD_ADDR 0x00100000 /* default load address */
	179	#define CONFIG_SYS_LOADS_BAUD_CHANGE 1
	180
	181	#define CONFIG_SYS_HUSH_PARSER 1
	182	#define CONFIG_CMDLINE_EDITING
	183
	184	#define CONFIG_SETUP_MEMORY_TAGS 2
	185	#define CONFIG_INITRD_TAG 1
	186	#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
	187
	188	/*
	189	* Physical Memory Map
	190	*/
	191	#define CONFIG_NR_DRAM_BANKS 1
	192	#define PHYS_SDRAM_1 0x00000000 /* DDR-SDRAM Bank #1 */
	193
	194	/*
	195	* additions for new relocation code
	196	*/
	197	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
	198	#define CONFIG_SYS_MAX_RAM_SIZE 0x40000000
	199	#define CONFIG_SYS_INIT_RAM_SIZE 0x100000
	200	#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_SDRAM_BASE + \
	201	CONFIG_SYS_INIT_RAM_SIZE - \
	202	GENERATED_GBL_DATA_SIZE)
	203	#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_GBL_DATA_OFFSET
	204
	205	/* landing address before relocation */
	206	#ifndef CONFIG_SYS_TEXT_BASE
	207	#define CONFIG_SYS_TEXT_BASE 0x0
	208	#endif
	209
10ed93dc JR	210	/*
	211	* MMC related configs
	212	*/
	213	#define CONFIG_ARM_PL180_MMCI
	214	#define MMC_BLOCK_SIZE 512
	215	#define CFG_EMMC_BASE 0x80114000
	216	#define CFG_MMC_BASE 0x80126000
	217
84dee301 MP	218	/*
	219	* FLASH and environment organization
	220	*/
	221	#define CONFIG_SYS_NO_FLASH
	222
	223	/*
	224	* base register values for U8500
	225	*/
	226	#define CFG_PRCMU_BASE 0x80157000 /* Power, reset and clock */
	227
	228
	229	/*
	230	* U8500 GPIO register base for 9 banks
	231	*/
	232	#define CONFIG_DB8500_GPIO
	233	#define CFG_GPIO_0_BASE 0x8012E000
	234	#define CFG_GPIO_1_BASE 0x8012E080
	235	#define CFG_GPIO_2_BASE 0x8000E000
	236	#define CFG_GPIO_3_BASE 0x8000E080
	237	#define CFG_GPIO_4_BASE 0x8000E100
	238	#define CFG_GPIO_5_BASE 0x8000E180
	239	#define CFG_GPIO_6_BASE 0x8011E000
	240	#define CFG_GPIO_7_BASE 0x8011E080
	241	#define CFG_GPIO_8_BASE 0xA03FE000
	242
	243	#define CFG_FSMC_BASE 0x80000000 /* FSMC Controller */
	244
	245	#endif /* __CONFIG_H */