[people/ms/u-boot.git] / include / configs / spear-common.h

/*
 * (C) Copyright 2009
 * Vipin Kumar, STMicroelectronics, <vipin.kumar@st.com>
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef _SPEAR_COMMON_H
#define _SPEAR_COMMON_H
/*
 * Common configurations used for both spear3xx as well as spear6xx
 */

#define CONFIG_SYS_GENERIC_BOARD

/* U-boot Load Address */
#define CONFIG_SYS_TEXT_BASE			0x00700000

/* Ethernet driver configuration */
#define CONFIG_MII
#define CONFIG_NET_MULTI
#define CONFIG_PHYLIB
#define CONFIG_PHY_RESET_DELAY			10000		/* in usec */
#define CONFIG_PHY_GIGE			/* Include GbE speed/duplex detection */

/* USBD driver configuration */
#if defined(CONFIG_SPEAR_USBTTY)
#define CONFIG_DW_UDC
#define CONFIG_USB_DEVICE
#define CONFIG_USBD_HS
#define CONFIG_USB_TTY

#define CONFIG_USBD_PRODUCT_NAME		"SPEAr SoC"
#define CONFIG_USBD_MANUFACTURER		"ST Microelectronics"

#endif

#define CONFIG_EXTRA_ENV_USBTTY			"usbtty=cdc_acm\0"

/* I2C driver configuration */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_DW
#if defined(CONFIG_SPEAR600)
#define CONFIG_SYS_I2C_BASE			0xD0200000
#elif defined(CONFIG_SPEAR300)
#define CONFIG_SYS_I2C_BASE			0xD0180000
#elif defined(CONFIG_SPEAR310)
#define CONFIG_SYS_I2C_BASE			0xD0180000
#elif defined(CONFIG_SPEAR320)
#define CONFIG_SYS_I2C_BASE			0xD0180000
#endif
#define CONFIG_SYS_I2C_SPEED			400000
#define CONFIG_SYS_I2C_SLAVE			0x02

#define CONFIG_I2C_CHIPADDRESS			0x50

/* Timer, HZ specific defines */

/* Flash configuration */
#if defined(CONFIG_FLASH_PNOR)
#define CONFIG_SPEAR_EMI
#else
#define CONFIG_ST_SMI
#endif

#if defined(CONFIG_ST_SMI)

#define CONFIG_SYS_MAX_FLASH_BANKS		2
#define CONFIG_SYS_FLASH_BASE			0xF8000000
#define CONFIG_SYS_CS1_FLASH_BASE		0xF9000000
#define CONFIG_SYS_FLASH_BANK_SIZE		0x01000000
#define CONFIG_SYS_FLASH_ADDR_BASE		{CONFIG_SYS_FLASH_BASE, \
						CONFIG_SYS_CS1_FLASH_BASE}
#define CONFIG_SYS_MAX_FLASH_SECT		128

#define CONFIG_SYS_FLASH_ERASE_TOUT		(3 * CONFIG_SYS_HZ)
#define CONFIG_SYS_FLASH_WRITE_TOUT		(3 * CONFIG_SYS_HZ)

#endif

/*
 * Serial Configuration (PL011)
 * CONFIG_PL01x_PORTS is defined in specific files
 */
#define CONFIG_PL011_SERIAL
#define CONFIG_PL011_CLOCK			(48 * 1000 * 1000)
#define CONFIG_CONS_INDEX			0
#define CONFIG_BAUDRATE				115200
#define CONFIG_SYS_BAUDRATE_TABLE		{ 9600, 19200, 38400, \
						57600, 115200 }

#define CONFIG_SYS_LOADS_BAUD_CHANGE

/* NAND FLASH Configuration */
#define CONFIG_SYS_NAND_SELF_INIT
#define CONFIG_MTD_DEVICE
#define CONFIG_MTD_PARTITIONS
#define CONFIG_NAND_FSMC
#define CONFIG_SYS_MAX_NAND_DEVICE		1
#define CONFIG_SYS_NAND_ONFI_DETECTION
#define CONFIG_SYS_NAND_QUIET_TEST

/*
 * Command support defines
 */
#define CONFIG_CMD_I2C
#define CONFIG_CMD_NAND
#define CONFIG_CMD_ENV
#define CONFIG_CMD_MEMORY
#define CONFIG_CMD_RUN
#define CONFIG_CMD_SAVES
#define CONFIG_CMD_NET
#define CONFIG_CMD_MII
#define CONFIG_CMD_PING
#define CONFIG_CMD_DHCP

/* This must be included AFTER the definition of CONFIG_COMMANDS (if any) */
#include <config_cmd_default.h>

/*
 * Default Environment Varible definitions
 */
#if defined(CONFIG_SPEAR_USBTTY)
#define CONFIG_BOOTDELAY			-1
#else
#define CONFIG_BOOTDELAY			1
#endif

#define CONFIG_ENV_OVERWRITE

/*
 * U-Boot Environment placing definitions.
 */
#if defined(CONFIG_ENV_IS_IN_FLASH)
#ifdef CONFIG_ST_SMI
/*
 * Environment is in serial NOR flash
 */
#define CONFIG_SYS_MONITOR_LEN			0x00040000
#define CONFIG_ENV_SECT_SIZE			0x00010000
#define CONFIG_FSMTDBLK				"/dev/mtdblock3 "

#define CONFIG_BOOTCOMMAND			"bootm 0xf8050000"

#elif defined(CONFIG_SPEAR_EMI)
/*
 * Environment is in parallel NOR flash
 */
#define CONFIG_SYS_MONITOR_LEN			0x00060000
#define CONFIG_ENV_SECT_SIZE			0x00020000
#define CONFIG_FSMTDBLK				"/dev/mtdblock3 "

#define CONFIG_BOOTCOMMAND			"cp.b 0x50080000 0x1600000 " \
						"0x4C0000; bootm 0x1600000"
#endif

#define CONFIG_ENV_ADDR				(CONFIG_SYS_FLASH_BASE + \
						CONFIG_SYS_MONITOR_LEN)
#elif defined(CONFIG_ENV_IS_IN_NAND)
/*
 * Environment is in NAND
 */

#define CONFIG_ENV_OFFSET			0x60000
#define CONFIG_ENV_RANGE			0x10000
#define CONFIG_FSMTDBLK				"/dev/mtdblock7 "

#define CONFIG_BOOTCOMMAND			"nand read.jffs2 0x1600000 " \
						"0x80000 0x4C0000; " \
						"bootm 0x1600000"
#endif

#define CONFIG_BOOTARGS				"console=ttyAMA0,115200 " \
						"mem=128M " \
						"root="CONFIG_FSMTDBLK \
						"rootfstype=jffs2"

#define CONFIG_NFSBOOTCOMMAND						\
	"bootp; "							\
	"setenv bootargs root=/dev/nfs rw "				\
	"nfsroot=$(serverip):$(rootpath) "				\
	"ip=$(ipaddr):$(serverip):$(gatewayip):"			\
			"$(netmask):$(hostname):$(netdev):off "		\
			"console=ttyAMA0,115200 $(othbootargs);"	\
	"bootm; "

#define CONFIG_RAMBOOTCOMMAND						\
	"setenv bootargs root=/dev/ram rw "				\
		"console=ttyAMA0,115200 $(othbootargs);"		\
	CONFIG_BOOTCOMMAND


#define CONFIG_ENV_SIZE				0x02000
#define CONFIG_SYS_MONITOR_BASE			CONFIG_SYS_TEXT_BASE

/* Miscellaneous configurable options */
#define CONFIG_ARCH_CPU_INIT
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_BOOT_PARAMS_ADDR			0x00000100
#define CONFIG_CMDLINE_TAG
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_MISC_INIT_R
#define CONFIG_ZERO_BOOTDELAY_CHECK
#define CONFIG_AUTOBOOT_KEYED
#define CONFIG_AUTOBOOT_STOP_STR		" "
#define CONFIG_AUTOBOOT_PROMPT			\
		"Hit SPACE in %d seconds to stop autoboot.\n", bootdelay

#define CONFIG_SYS_MEMTEST_START		0x00800000
#define CONFIG_SYS_MEMTEST_END			0x04000000
#define CONFIG_SYS_MALLOC_LEN			(1024*1024)
#define CONFIG_IDENT_STRING			"-SPEAr"
#define CONFIG_SYS_LONGHELP
#define CONFIG_SYS_PROMPT			"u-boot> "
#define CONFIG_CMDLINE_EDITING
#define CONFIG_SYS_CBSIZE			256
#define CONFIG_SYS_PBSIZE			(CONFIG_SYS_CBSIZE + \
						sizeof(CONFIG_SYS_PROMPT) + 16)
#define CONFIG_SYS_MAXARGS			16
#define CONFIG_SYS_BARGSIZE			CONFIG_SYS_CBSIZE
#define CONFIG_SYS_LOAD_ADDR			0x00800000
#define CONFIG_SYS_CONSOLE_INFO_QUIET

#define CONFIG_SYS_FLASH_EMPTY_INFO

/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS			1
#define PHYS_SDRAM_1				0x00000000
#define PHYS_SDRAM_1_MAXSIZE			0x40000000

#define CONFIG_SYS_SDRAM_BASE			PHYS_SDRAM_1
#define CONFIG_SYS_INIT_RAM_ADDR		0xD2800000
#define CONFIG_SYS_INIT_RAM_SIZE		0x2000

#define CONFIG_SYS_INIT_SP_OFFSET		\
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)

#define CONFIG_SYS_INIT_SP_ADDR			\
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

#endif
Commit	Line	Data
566c9c16 VK	1	/*
	2	* (C) Copyright 2009
	3	* Vipin Kumar, STMicroelectronics, <vipin.kumar@st.com>
	4	*
1a459660	5	* SPDX-License-Identifier: GPL-2.0+
566c9c16 VK	6	*/
	7
	8	#ifndef _SPEAR_COMMON_H
	9	#define _SPEAR_COMMON_H
	10	/*
	11	* Common configurations used for both spear3xx as well as spear6xx
	12	*/
	13
5822f5ae SR	14	#define CONFIG_SYS_GENERIC_BOARD
5822f5ae SR	15
f273e5b2 VK	16	/* U-boot Load Address */
	17	#define CONFIG_SYS_TEXT_BASE 0x00700000
	18
deb00562 VK	19	/* Ethernet driver configuration */
deb00562 VK	20	#define CONFIG_MII
deb00562	21	#define CONFIG_NET_MULTI
92a190aa	22	#define CONFIG_PHYLIB
deb00562	23	#define CONFIG_PHY_RESET_DELAY 10000 /* in usec */
ef76025a	24	#define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */
deb00562	25
566c9c16	26	/* USBD driver configuration */
b884236e	27	#if defined(CONFIG_SPEAR_USBTTY)
2721551a	28	#define CONFIG_DW_UDC
566c9c16	29	#define CONFIG_USB_DEVICE
50726684	30	#define CONFIG_USBD_HS
566c9c16 VK	31	#define CONFIG_USB_TTY
	32
	33	#define CONFIG_USBD_PRODUCT_NAME "SPEAr SoC"
	34	#define CONFIG_USBD_MANUFACTURER "ST Microelectronics"
	35
b884236e VK	36	#endif
b884236e VK	37
566c9c16 VK	38	#define CONFIG_EXTRA_ENV_USBTTY "usbtty=cdc_acm\0"
	39
	40	/* I2C driver configuration */
678398b1 SR	41	#define CONFIG_SYS_I2C
678398b1 SR	42	#define CONFIG_SYS_I2C_DW
f93f589c AB	43	#if defined(CONFIG_SPEAR600)
	44	#define CONFIG_SYS_I2C_BASE 0xD0200000
	45	#elif defined(CONFIG_SPEAR300)
	46	#define CONFIG_SYS_I2C_BASE 0xD0180000
	47	#elif defined(CONFIG_SPEAR310)
	48	#define CONFIG_SYS_I2C_BASE 0xD0180000
	49	#elif defined(CONFIG_SPEAR320)
	50	#define CONFIG_SYS_I2C_BASE 0xD0180000
	51	#endif
566c9c16 VK	52	#define CONFIG_SYS_I2C_SPEED 400000
	53	#define CONFIG_SYS_I2C_SLAVE 0x02
	54
	55	#define CONFIG_I2C_CHIPADDRESS 0x50
	56
	57	/* Timer, HZ specific defines */
566c9c16 VK	58
	59	/* Flash configuration */
	60	#if defined(CONFIG_FLASH_PNOR)
9b382b43	61	#define CONFIG_SPEAR_EMI
566c9c16	62	#else
f3fcf92d	63	#define CONFIG_ST_SMI
566c9c16 VK	64	#endif
566c9c16 VK	65
f3fcf92d	66	#if defined(CONFIG_ST_SMI)
566c9c16 VK	67
566c9c16 VK	68	#define CONFIG_SYS_MAX_FLASH_BANKS 2
bc0bdf4c AV	69	#define CONFIG_SYS_FLASH_BASE 0xF8000000
	70	#define CONFIG_SYS_CS1_FLASH_BASE 0xF9000000
	71	#define CONFIG_SYS_FLASH_BANK_SIZE 0x01000000
566c9c16 VK	72	#define CONFIG_SYS_FLASH_ADDR_BASE {CONFIG_SYS_FLASH_BASE, \
	73	CONFIG_SYS_CS1_FLASH_BASE}
	74	#define CONFIG_SYS_MAX_FLASH_SECT 128
	75
566c9c16 VK	76	#define CONFIG_SYS_FLASH_ERASE_TOUT (3 * CONFIG_SYS_HZ)
	77	#define CONFIG_SYS_FLASH_WRITE_TOUT (3 * CONFIG_SYS_HZ)
	78
	79	#endif
	80
	81	/*
	82	* Serial Configuration (PL011)
	83	* CONFIG_PL01x_PORTS is defined in specific files
	84	*/
	85	#define CONFIG_PL011_SERIAL
	86	#define CONFIG_PL011_CLOCK (48 * 1000 * 1000)
	87	#define CONFIG_CONS_INDEX 0
	88	#define CONFIG_BAUDRATE 115200
	89	#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, \
	90	57600, 115200 }
	91
	92	#define CONFIG_SYS_LOADS_BAUD_CHANGE
	93
	94	/* NAND FLASH Configuration */
1fa943b9	95	#define CONFIG_SYS_NAND_SELF_INIT
a39fcfb2 SH	96	#define CONFIG_MTD_DEVICE
a39fcfb2 SH	97	#define CONFIG_MTD_PARTITIONS
1fa943b9	98	#define CONFIG_NAND_FSMC
566c9c16	99	#define CONFIG_SYS_MAX_NAND_DEVICE 1
bc912e78 VK	100	#define CONFIG_SYS_NAND_ONFI_DETECTION
bc912e78 VK	101	#define CONFIG_SYS_NAND_QUIET_TEST
566c9c16 VK	102
	103	/*
	104	* Command support defines
	105	*/
	106	#define CONFIG_CMD_I2C
	107	#define CONFIG_CMD_NAND
	108	#define CONFIG_CMD_ENV
	109	#define CONFIG_CMD_MEMORY
	110	#define CONFIG_CMD_RUN
	111	#define CONFIG_CMD_SAVES
deb00562 VK	112	#define CONFIG_CMD_NET
	113	#define CONFIG_CMD_MII
	114	#define CONFIG_CMD_PING
	115	#define CONFIG_CMD_DHCP
566c9c16 VK	116
	117	/* This must be included AFTER the definition of CONFIG_COMMANDS (if any) */
	118	#include <config_cmd_default.h>
566c9c16 VK	119
	120	/*
	121	* Default Environment Varible definitions
	122	*/
	123	#if defined(CONFIG_SPEAR_USBTTY)
	124	#define CONFIG_BOOTDELAY -1
	125	#else
	126	#define CONFIG_BOOTDELAY 1
	127	#endif
	128
	129	#define CONFIG_ENV_OVERWRITE
	130
	131	/*
	132	* U-Boot Environment placing definitions.
	133	*/
	134	#if defined(CONFIG_ENV_IS_IN_FLASH)
f3fcf92d	135	#ifdef CONFIG_ST_SMI
566c9c16 VK	136	/*
	137	* Environment is in serial NOR flash
	138	*/
	139	#define CONFIG_SYS_MONITOR_LEN 0x00040000
	140	#define CONFIG_ENV_SECT_SIZE 0x00010000
1b7935cd	141	#define CONFIG_FSMTDBLK "/dev/mtdblock3 "
566c9c16 VK	142
	143	#define CONFIG_BOOTCOMMAND "bootm 0xf8050000"
	144
	145	#elif defined(CONFIG_SPEAR_EMI)
	146	/*
	147	* Environment is in parallel NOR flash
	148	*/
	149	#define CONFIG_SYS_MONITOR_LEN 0x00060000
	150	#define CONFIG_ENV_SECT_SIZE 0x00020000
	151	#define CONFIG_FSMTDBLK "/dev/mtdblock3 "
	152
	153	#define CONFIG_BOOTCOMMAND "cp.b 0x50080000 0x1600000 " \
	154	"0x4C0000; bootm 0x1600000"
	155	#endif
	156
0296f159	157	#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + \
566c9c16 VK	158	CONFIG_SYS_MONITOR_LEN)
	159	#elif defined(CONFIG_ENV_IS_IN_NAND)
	160	/*
	161	* Environment is in NAND
	162	*/
	163
	164	#define CONFIG_ENV_OFFSET 0x60000
	165	#define CONFIG_ENV_RANGE 0x10000
1b7935cd	166	#define CONFIG_FSMTDBLK "/dev/mtdblock7 "
566c9c16 VK	167
	168	#define CONFIG_BOOTCOMMAND "nand read.jffs2 0x1600000 " \
	169	"0x80000 0x4C0000; " \
	170	"bootm 0x1600000"
	171	#endif
	172
1b7935cd VK	173	#define CONFIG_BOOTARGS "console=ttyAMA0,115200 " \
1b7935cd VK	174	"mem=128M " \
566c9c16 VK	175	"root="CONFIG_FSMTDBLK \
	176	"rootfstype=jffs2"
	177
1b7935cd VK	178	#define CONFIG_NFSBOOTCOMMAND \
	179	"bootp; " \
	180	"setenv bootargs root=/dev/nfs rw " \
	181	"nfsroot=$(serverip):$(rootpath) " \
	182	"ip=$(ipaddr):$(serverip):$(gatewayip):" \
	183	"$(netmask):$(hostname):$(netdev):off " \
	184	"console=ttyAMA0,115200 $(othbootargs);" \
	185	"bootm; "
	186
	187	#define CONFIG_RAMBOOTCOMMAND \
	188	"setenv bootargs root=/dev/ram rw " \
	189	"console=ttyAMA0,115200 $(othbootargs);" \
	190	CONFIG_BOOTCOMMAND
	191
	192
566c9c16	193	#define CONFIG_ENV_SIZE 0x02000
0296f159	194	#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
566c9c16 VK	195
566c9c16 VK	196	/* Miscellaneous configurable options */
962d026b	197	#define CONFIG_ARCH_CPU_INIT
0b7ff3f4	198	#define CONFIG_BOARD_EARLY_INIT_F
962d026b	199	#define CONFIG_DISPLAY_CPUINFO
566c9c16	200	#define CONFIG_BOOT_PARAMS_ADDR 0x00000100
9b382b43 AV	201	#define CONFIG_CMDLINE_TAG
	202	#define CONFIG_SETUP_MEMORY_TAGS
	203	#define CONFIG_MISC_INIT_R
	204	#define CONFIG_ZERO_BOOTDELAY_CHECK
	205	#define CONFIG_AUTOBOOT_KEYED
566c9c16 VK	206	#define CONFIG_AUTOBOOT_STOP_STR " "
	207	#define CONFIG_AUTOBOOT_PROMPT \
	208	"Hit SPACE in %d seconds to stop autoboot.\n", bootdelay
	209
	210	#define CONFIG_SYS_MEMTEST_START 0x00800000
	211	#define CONFIG_SYS_MEMTEST_END 0x04000000
	212	#define CONFIG_SYS_MALLOC_LEN (1024*1024)
566c9c16 VK	213	#define CONFIG_IDENT_STRING "-SPEAr"
	214	#define CONFIG_SYS_LONGHELP
	215	#define CONFIG_SYS_PROMPT "u-boot> "
	216	#define CONFIG_CMDLINE_EDITING
	217	#define CONFIG_SYS_CBSIZE 256
	218	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
	219	sizeof(CONFIG_SYS_PROMPT) + 16)
	220	#define CONFIG_SYS_MAXARGS 16
	221	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
	222	#define CONFIG_SYS_LOAD_ADDR 0x00800000
9b382b43	223	#define CONFIG_SYS_CONSOLE_INFO_QUIET
566c9c16	224
cc4b5a34 VK	225	#define CONFIG_SYS_FLASH_EMPTY_INFO
cc4b5a34 VK	226
566c9c16 VK	227	/* Physical Memory Map */
	228	#define CONFIG_NR_DRAM_BANKS 1
	229	#define PHYS_SDRAM_1 0x00000000
	230	#define PHYS_SDRAM_1_MAXSIZE 0x40000000
	231
a39fcfb2 SH	232	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
	233	#define CONFIG_SYS_INIT_RAM_ADDR 0xD2800000
	234	#define CONFIG_SYS_INIT_RAM_SIZE 0x2000
	235
	236	#define CONFIG_SYS_INIT_SP_OFFSET \
	237	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
	238
	239	#define CONFIG_SYS_INIT_SP_ADDR \
	240	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
	241
566c9c16	242	#endif