[people/ms/u-boot.git] / include / configs / spear-common.h

/*
 * (C) Copyright 2009
 * Vipin Kumar, STMicroelectronics, <vipin.kumar@st.com>
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef _SPEAR_COMMON_H
#define _SPEAR_COMMON_H
/*
 * Common configurations used for both spear3xx as well as spear6xx
 */


/* U-Boot Load Address */
#define CONFIG_SYS_TEXT_BASE			0x00700000

/* Ethernet driver configuration */
#define CONFIG_MII
#define CONFIG_PHY_RESET_DELAY			10000		/* in usec */
#define CONFIG_PHY_GIGE			/* Include GbE speed/duplex detection */

/* USBD driver configuration */
#if defined(CONFIG_SPEAR_USBTTY)
#define CONFIG_DW_UDC
#define CONFIG_USB_DEVICE
#define CONFIG_USBD_HS
#define CONFIG_USB_TTY

#define CONFIG_USBD_PRODUCT_NAME		"SPEAr SoC"
#define CONFIG_USBD_MANUFACTURER		"ST Microelectronics"

#endif

#define CONFIG_EXTRA_ENV_USBTTY			"usbtty=cdc_acm\0"

/* I2C driver configuration */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_DW
#if defined(CONFIG_SPEAR600)
#define CONFIG_SYS_I2C_BASE			0xD0200000
#elif defined(CONFIG_SPEAR300)
#define CONFIG_SYS_I2C_BASE			0xD0180000
#elif defined(CONFIG_SPEAR310)
#define CONFIG_SYS_I2C_BASE			0xD0180000
#elif defined(CONFIG_SPEAR320)
#define CONFIG_SYS_I2C_BASE			0xD0180000
#endif
#define CONFIG_SYS_I2C_SPEED			400000
#define CONFIG_SYS_I2C_SLAVE			0x02

#define CONFIG_I2C_CHIPADDRESS			0x50

/* Timer, HZ specific defines */

/* Flash configuration */
#if defined(CONFIG_FLASH_PNOR)
#define CONFIG_SPEAR_EMI
#else
#define CONFIG_ST_SMI
#endif

#if defined(CONFIG_ST_SMI)

#define CONFIG_SYS_MAX_FLASH_BANKS		2
#define CONFIG_SYS_FLASH_BASE			0xF8000000
#define CONFIG_SYS_CS1_FLASH_BASE		0xF9000000
#define CONFIG_SYS_FLASH_BANK_SIZE		0x01000000
#define CONFIG_SYS_FLASH_ADDR_BASE		{CONFIG_SYS_FLASH_BASE, \
						CONFIG_SYS_CS1_FLASH_BASE}
#define CONFIG_SYS_MAX_FLASH_SECT		128

#define CONFIG_SYS_FLASH_ERASE_TOUT		(3 * CONFIG_SYS_HZ)
#define CONFIG_SYS_FLASH_WRITE_TOUT		(3 * CONFIG_SYS_HZ)

#endif

/*
 * Serial Configuration (PL011)
 * CONFIG_PL01x_PORTS is defined in specific files
 */
#define CONFIG_PL011_SERIAL
#define CONFIG_PL011_CLOCK			(48 * 1000 * 1000)
#define CONFIG_CONS_INDEX			0
#define CONFIG_BAUDRATE				115200
#define CONFIG_SYS_BAUDRATE_TABLE		{ 9600, 19200, 38400, \
						57600, 115200 }

#define CONFIG_SYS_LOADS_BAUD_CHANGE

/* NAND FLASH Configuration */
#define CONFIG_SYS_NAND_SELF_INIT
#define CONFIG_MTD_DEVICE
#define CONFIG_MTD_PARTITIONS
#define CONFIG_NAND_FSMC
#define CONFIG_SYS_MAX_NAND_DEVICE		1
#define CONFIG_SYS_NAND_ONFI_DETECTION

/*
 * Command support defines
 */
#define CONFIG_CMD_I2C
#define CONFIG_CMD_NAND
#define CONFIG_CMD_ENV
#define CONFIG_CMD_SAVES
#define CONFIG_CMD_MII
#define CONFIG_CMD_PING
#define CONFIG_CMD_DHCP

/*
 * Default Environment Varible definitions
 */
#if defined(CONFIG_SPEAR_USBTTY)
#define CONFIG_BOOTDELAY			-1
#else
#define CONFIG_BOOTDELAY			1
#endif

#define CONFIG_ENV_OVERWRITE

/*
 * U-Boot Environment placing definitions.
 */
#if defined(CONFIG_ENV_IS_IN_FLASH)
#ifdef CONFIG_ST_SMI
/*
 * Environment is in serial NOR flash
 */
#define CONFIG_SYS_MONITOR_LEN			0x00040000
#define CONFIG_ENV_SECT_SIZE			0x00010000
#define CONFIG_FSMTDBLK				"/dev/mtdblock3 "

#define CONFIG_BOOTCOMMAND			"bootm 0xf8050000"

#elif defined(CONFIG_SPEAR_EMI)
/*
 * Environment is in parallel NOR flash
 */
#define CONFIG_SYS_MONITOR_LEN			0x00060000
#define CONFIG_ENV_SECT_SIZE			0x00020000
#define CONFIG_FSMTDBLK				"/dev/mtdblock3 "

#define CONFIG_BOOTCOMMAND			"cp.b 0x50080000 0x1600000 " \
						"0x4C0000; bootm 0x1600000"
#endif

#define CONFIG_ENV_ADDR				(CONFIG_SYS_FLASH_BASE + \
						CONFIG_SYS_MONITOR_LEN)
#elif defined(CONFIG_ENV_IS_IN_NAND)
/*
 * Environment is in NAND
 */

#define CONFIG_ENV_OFFSET			0x60000
#define CONFIG_ENV_RANGE			0x10000
#define CONFIG_FSMTDBLK				"/dev/mtdblock7 "

#define CONFIG_BOOTCOMMAND			"nand read.jffs2 0x1600000 " \
						"0x80000 0x4C0000; " \
						"bootm 0x1600000"
#endif

#define CONFIG_BOOTARGS				"console=ttyAMA0,115200 " \
						"mem=128M " \
						"root="CONFIG_FSMTDBLK \
						"rootfstype=jffs2"

#define CONFIG_NFSBOOTCOMMAND						\
	"bootp; "							\
	"setenv bootargs root=/dev/nfs rw "				\
	"nfsroot=$(serverip):$(rootpath) "				\
	"ip=$(ipaddr):$(serverip):$(gatewayip):"			\
			"$(netmask):$(hostname):$(netdev):off "		\
			"console=ttyAMA0,115200 $(othbootargs);"	\
	"bootm; "

#define CONFIG_RAMBOOTCOMMAND						\
	"setenv bootargs root=/dev/ram rw "				\
		"console=ttyAMA0,115200 $(othbootargs);"		\
	CONFIG_BOOTCOMMAND


#define CONFIG_ENV_SIZE				0x02000
#define CONFIG_SYS_MONITOR_BASE			CONFIG_SYS_TEXT_BASE

/* Miscellaneous configurable options */
#define CONFIG_ARCH_CPU_INIT
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_BOOT_PARAMS_ADDR			0x00000100
#define CONFIG_CMDLINE_TAG
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_MISC_INIT_R
#define CONFIG_ZERO_BOOTDELAY_CHECK

#define CONFIG_SYS_MEMTEST_START		0x00800000
#define CONFIG_SYS_MEMTEST_END			0x04000000
#define CONFIG_SYS_MALLOC_LEN			(1024*1024)
#define CONFIG_IDENT_STRING			"-SPEAr"
#define CONFIG_SYS_LONGHELP
#define CONFIG_CMDLINE_EDITING
#define CONFIG_SYS_CBSIZE			256
#define CONFIG_SYS_PBSIZE			(CONFIG_SYS_CBSIZE + \
						sizeof(CONFIG_SYS_PROMPT) + 16)
#define CONFIG_SYS_MAXARGS			16
#define CONFIG_SYS_BARGSIZE			CONFIG_SYS_CBSIZE
#define CONFIG_SYS_LOAD_ADDR			0x00800000
#define CONFIG_SYS_CONSOLE_INFO_QUIET

#define CONFIG_SYS_FLASH_EMPTY_INFO

/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS			1
#define PHYS_SDRAM_1				0x00000000
#define PHYS_SDRAM_1_MAXSIZE			0x40000000

#define CONFIG_SYS_SDRAM_BASE			PHYS_SDRAM_1
#define CONFIG_SYS_INIT_RAM_ADDR		0xD2800000
#define CONFIG_SYS_INIT_RAM_SIZE		0x2000

#define CONFIG_SYS_INIT_SP_OFFSET		\
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)

#define CONFIG_SYS_INIT_SP_ADDR			\
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

#endif
Commit	Line	Data
566c9c16 VK	1	/*
	2	* (C) Copyright 2009
	3	* Vipin Kumar, STMicroelectronics, <vipin.kumar@st.com>
	4	*
1a459660	5	* SPDX-License-Identifier: GPL-2.0+
566c9c16 VK	6	*/
	7
	8	#ifndef _SPEAR_COMMON_H
	9	#define _SPEAR_COMMON_H
	10	/*
	11	* Common configurations used for both spear3xx as well as spear6xx
	12	*/
	13
5822f5ae	14
a187559e	15	/* U-Boot Load Address */
f273e5b2 VK	16	#define CONFIG_SYS_TEXT_BASE 0x00700000
f273e5b2 VK	17
deb00562 VK	18	/* Ethernet driver configuration */
deb00562 VK	19	#define CONFIG_MII
deb00562	20	#define CONFIG_PHY_RESET_DELAY 10000 /* in usec */
ef76025a	21	#define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */
deb00562	22
566c9c16	23	/* USBD driver configuration */
b884236e	24	#if defined(CONFIG_SPEAR_USBTTY)
2721551a	25	#define CONFIG_DW_UDC
566c9c16	26	#define CONFIG_USB_DEVICE
50726684	27	#define CONFIG_USBD_HS
566c9c16 VK	28	#define CONFIG_USB_TTY
	29
	30	#define CONFIG_USBD_PRODUCT_NAME "SPEAr SoC"
	31	#define CONFIG_USBD_MANUFACTURER "ST Microelectronics"
	32
b884236e VK	33	#endif
b884236e VK	34
566c9c16 VK	35	#define CONFIG_EXTRA_ENV_USBTTY "usbtty=cdc_acm\0"
	36
	37	/* I2C driver configuration */
678398b1 SR	38	#define CONFIG_SYS_I2C
678398b1 SR	39	#define CONFIG_SYS_I2C_DW
f93f589c AB	40	#if defined(CONFIG_SPEAR600)
	41	#define CONFIG_SYS_I2C_BASE 0xD0200000
	42	#elif defined(CONFIG_SPEAR300)
	43	#define CONFIG_SYS_I2C_BASE 0xD0180000
	44	#elif defined(CONFIG_SPEAR310)
	45	#define CONFIG_SYS_I2C_BASE 0xD0180000
	46	#elif defined(CONFIG_SPEAR320)
	47	#define CONFIG_SYS_I2C_BASE 0xD0180000
	48	#endif
566c9c16 VK	49	#define CONFIG_SYS_I2C_SPEED 400000
	50	#define CONFIG_SYS_I2C_SLAVE 0x02
	51
	52	#define CONFIG_I2C_CHIPADDRESS 0x50
	53
	54	/* Timer, HZ specific defines */
566c9c16 VK	55
	56	/* Flash configuration */
	57	#if defined(CONFIG_FLASH_PNOR)
9b382b43	58	#define CONFIG_SPEAR_EMI
566c9c16	59	#else
f3fcf92d	60	#define CONFIG_ST_SMI
566c9c16 VK	61	#endif
566c9c16 VK	62
f3fcf92d	63	#if defined(CONFIG_ST_SMI)
566c9c16 VK	64
566c9c16 VK	65	#define CONFIG_SYS_MAX_FLASH_BANKS 2
bc0bdf4c AV	66	#define CONFIG_SYS_FLASH_BASE 0xF8000000
	67	#define CONFIG_SYS_CS1_FLASH_BASE 0xF9000000
	68	#define CONFIG_SYS_FLASH_BANK_SIZE 0x01000000
566c9c16 VK	69	#define CONFIG_SYS_FLASH_ADDR_BASE {CONFIG_SYS_FLASH_BASE, \
	70	CONFIG_SYS_CS1_FLASH_BASE}
	71	#define CONFIG_SYS_MAX_FLASH_SECT 128
	72
566c9c16 VK	73	#define CONFIG_SYS_FLASH_ERASE_TOUT (3 * CONFIG_SYS_HZ)
	74	#define CONFIG_SYS_FLASH_WRITE_TOUT (3 * CONFIG_SYS_HZ)
	75
	76	#endif
	77
	78	/*
	79	* Serial Configuration (PL011)
	80	* CONFIG_PL01x_PORTS is defined in specific files
	81	*/
	82	#define CONFIG_PL011_SERIAL
	83	#define CONFIG_PL011_CLOCK (48 * 1000 * 1000)
	84	#define CONFIG_CONS_INDEX 0
	85	#define CONFIG_BAUDRATE 115200
	86	#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, \
	87	57600, 115200 }
	88
	89	#define CONFIG_SYS_LOADS_BAUD_CHANGE
	90
	91	/* NAND FLASH Configuration */
1fa943b9	92	#define CONFIG_SYS_NAND_SELF_INIT
a39fcfb2 SH	93	#define CONFIG_MTD_DEVICE
a39fcfb2 SH	94	#define CONFIG_MTD_PARTITIONS
1fa943b9	95	#define CONFIG_NAND_FSMC
566c9c16	96	#define CONFIG_SYS_MAX_NAND_DEVICE 1
bc912e78	97	#define CONFIG_SYS_NAND_ONFI_DETECTION
566c9c16 VK	98
	99	/*
	100	* Command support defines
	101	*/
	102	#define CONFIG_CMD_I2C
	103	#define CONFIG_CMD_NAND
	104	#define CONFIG_CMD_ENV
566c9c16	105	#define CONFIG_CMD_SAVES
deb00562 VK	106	#define CONFIG_CMD_MII
	107	#define CONFIG_CMD_PING
	108	#define CONFIG_CMD_DHCP
566c9c16	109
566c9c16 VK	110	/*
	111	* Default Environment Varible definitions
	112	*/
	113	#if defined(CONFIG_SPEAR_USBTTY)
	114	#define CONFIG_BOOTDELAY -1
	115	#else
	116	#define CONFIG_BOOTDELAY 1
	117	#endif
	118
	119	#define CONFIG_ENV_OVERWRITE
	120
	121	/*
	122	* U-Boot Environment placing definitions.
	123	*/
	124	#if defined(CONFIG_ENV_IS_IN_FLASH)
f3fcf92d	125	#ifdef CONFIG_ST_SMI
566c9c16 VK	126	/*
	127	* Environment is in serial NOR flash
	128	*/
	129	#define CONFIG_SYS_MONITOR_LEN 0x00040000
	130	#define CONFIG_ENV_SECT_SIZE 0x00010000
1b7935cd	131	#define CONFIG_FSMTDBLK "/dev/mtdblock3 "
566c9c16 VK	132
	133	#define CONFIG_BOOTCOMMAND "bootm 0xf8050000"
	134
	135	#elif defined(CONFIG_SPEAR_EMI)
	136	/*
	137	* Environment is in parallel NOR flash
	138	*/
	139	#define CONFIG_SYS_MONITOR_LEN 0x00060000
	140	#define CONFIG_ENV_SECT_SIZE 0x00020000
	141	#define CONFIG_FSMTDBLK "/dev/mtdblock3 "
	142
	143	#define CONFIG_BOOTCOMMAND "cp.b 0x50080000 0x1600000 " \
	144	"0x4C0000; bootm 0x1600000"
	145	#endif
	146
0296f159	147	#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + \
566c9c16 VK	148	CONFIG_SYS_MONITOR_LEN)
	149	#elif defined(CONFIG_ENV_IS_IN_NAND)
	150	/*
	151	* Environment is in NAND
	152	*/
	153
	154	#define CONFIG_ENV_OFFSET 0x60000
	155	#define CONFIG_ENV_RANGE 0x10000
1b7935cd	156	#define CONFIG_FSMTDBLK "/dev/mtdblock7 "
566c9c16 VK	157
	158	#define CONFIG_BOOTCOMMAND "nand read.jffs2 0x1600000 " \
	159	"0x80000 0x4C0000; " \
	160	"bootm 0x1600000"
	161	#endif
	162
1b7935cd VK	163	#define CONFIG_BOOTARGS "console=ttyAMA0,115200 " \
1b7935cd VK	164	"mem=128M " \
566c9c16 VK	165	"root="CONFIG_FSMTDBLK \
	166	"rootfstype=jffs2"
	167
1b7935cd VK	168	#define CONFIG_NFSBOOTCOMMAND \
	169	"bootp; " \
	170	"setenv bootargs root=/dev/nfs rw " \
	171	"nfsroot=$(serverip):$(rootpath) " \
	172	"ip=$(ipaddr):$(serverip):$(gatewayip):" \
	173	"$(netmask):$(hostname):$(netdev):off " \
	174	"console=ttyAMA0,115200 $(othbootargs);" \
	175	"bootm; "
	176
	177	#define CONFIG_RAMBOOTCOMMAND \
	178	"setenv bootargs root=/dev/ram rw " \
	179	"console=ttyAMA0,115200 $(othbootargs);" \
	180	CONFIG_BOOTCOMMAND
	181
	182
566c9c16	183	#define CONFIG_ENV_SIZE 0x02000
0296f159	184	#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
566c9c16 VK	185
566c9c16 VK	186	/* Miscellaneous configurable options */
962d026b	187	#define CONFIG_ARCH_CPU_INIT
0b7ff3f4	188	#define CONFIG_BOARD_EARLY_INIT_F
962d026b	189	#define CONFIG_DISPLAY_CPUINFO
566c9c16	190	#define CONFIG_BOOT_PARAMS_ADDR 0x00000100
9b382b43 AV	191	#define CONFIG_CMDLINE_TAG
	192	#define CONFIG_SETUP_MEMORY_TAGS
	193	#define CONFIG_MISC_INIT_R
	194	#define CONFIG_ZERO_BOOTDELAY_CHECK
566c9c16 VK	195
	196	#define CONFIG_SYS_MEMTEST_START 0x00800000
	197	#define CONFIG_SYS_MEMTEST_END 0x04000000
	198	#define CONFIG_SYS_MALLOC_LEN (1024*1024)
566c9c16 VK	199	#define CONFIG_IDENT_STRING "-SPEAr"
566c9c16 VK	200	#define CONFIG_SYS_LONGHELP
566c9c16 VK	201	#define CONFIG_CMDLINE_EDITING
	202	#define CONFIG_SYS_CBSIZE 256
	203	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
	204	sizeof(CONFIG_SYS_PROMPT) + 16)
	205	#define CONFIG_SYS_MAXARGS 16
	206	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
	207	#define CONFIG_SYS_LOAD_ADDR 0x00800000
9b382b43	208	#define CONFIG_SYS_CONSOLE_INFO_QUIET
566c9c16	209
cc4b5a34 VK	210	#define CONFIG_SYS_FLASH_EMPTY_INFO
cc4b5a34 VK	211
566c9c16 VK	212	/* Physical Memory Map */
	213	#define CONFIG_NR_DRAM_BANKS 1
	214	#define PHYS_SDRAM_1 0x00000000
	215	#define PHYS_SDRAM_1_MAXSIZE 0x40000000
	216
a39fcfb2 SH	217	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
	218	#define CONFIG_SYS_INIT_RAM_ADDR 0xD2800000
	219	#define CONFIG_SYS_INIT_RAM_SIZE 0x2000
	220
	221	#define CONFIG_SYS_INIT_SP_OFFSET \
	222	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
	223
	224	#define CONFIG_SYS_INIT_SP_ADDR \
	225	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
	226
566c9c16	227	#endif