]>
Commit | Line | Data |
---|---|---|
a373024e AD |
1 | /* |
2 | * Sysam stmark2 board configuration | |
3 | * | |
4 | * (C) Copyright 2017 Angelo Dureghello <angelo@sysam.it> | |
5 | * | |
6 | * SPDX-License-Identifier: GPL-2.0+ | |
7 | */ | |
8 | ||
9 | #ifndef __STMARK2_CONFIG_H | |
10 | #define __STMARK2_CONFIG_H | |
11 | ||
12 | #define CONFIG_STMARK2 | |
13 | #define CONFIG_HOSTNAME stmark2 | |
14 | ||
15 | #define CONFIG_MCFUART | |
16 | #define CONFIG_SYS_UART_PORT 0 | |
17 | #define CONFIG_SYS_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } | |
18 | ||
19 | #define LDS_BOARD_TEXT \ | |
20 | board/sysam/stmark2/sbf_dram_init.o (.text*) | |
21 | ||
22 | #define CONFIG_TIMESTAMP | |
23 | ||
24 | #define CONFIG_BOOTARGS \ | |
25 | "console=ttyS0,115200 root=/dev/ram0 rw " \ | |
26 | "rootfstype=ramfs " \ | |
27 | "rdinit=/bin/init " \ | |
28 | "devtmpfs.mount=1" | |
29 | ||
30 | #define CONFIG_BOOTCOMMAND \ | |
31 | "sf probe 0:1 50000000; " \ | |
32 | "sf read ${loadaddr} 0x100000 ${kern_size}; " \ | |
33 | "bootm ${loadaddr}" | |
34 | ||
35 | #define CONFIG_EXTRA_ENV_SETTINGS \ | |
36 | "kern_size=0x700000\0" \ | |
37 | "loadaddr=0x40001000\0" \ | |
38 | "-(rootfs)\0" \ | |
39 | "update_uboot=loady ${loadaddr}; " \ | |
40 | "sf probe 0:1 50000000; " \ | |
41 | "sf erase 0 0x80000; " \ | |
42 | "sf write ${loadaddr} 0 ${filesize}\0" \ | |
43 | "update_kernel=loady ${loadaddr}; " \ | |
44 | "setenv kern_size ${filesize}; saveenv; " \ | |
45 | "sf probe 0:1 50000000; " \ | |
46 | "sf erase 0x100000 0x700000; " \ | |
47 | "sf write ${loadaddr} 0x100000 ${filesize}\0" \ | |
48 | "update_rootfs=loady ${loadaddr}; " \ | |
49 | "sf probe 0:1 50000000; " \ | |
50 | "sf erase 0x00800000 0x100000; " \ | |
51 | "sf write ${loadaddr} 0x00800000 ${filesize}\0" \ | |
52 | "" | |
53 | ||
54 | /* Realtime clock */ | |
55 | #undef CONFIG_MCFRTC | |
56 | #define CONFIG_RTC_MCFRRTC | |
57 | #define CONFIG_SYS_MCFRRTC_BASE 0xFC0A8000 | |
58 | ||
59 | /* spi not partitions */ | |
a373024e AD |
60 | #define CONFIG_MTD_DEVICE |
61 | #define CONFIG_JFFS2_CMDLINE | |
62 | #define CONFIG_JFFS2_DEV "nor0" | |
a373024e AD |
63 | |
64 | /* Timer */ | |
65 | #define CONFIG_MCFTMR | |
66 | #undef CONFIG_MCFPIT | |
67 | ||
68 | /* DSPI and Serial Flash */ | |
69 | #define CONFIG_CF_SPI | |
70 | #define CONFIG_CF_DSPI | |
71 | #define CONFIG_SF_DEFAULT_SPEED 50000000 | |
72 | #define CONFIG_SERIAL_FLASH | |
73 | #define CONFIG_HARD_SPI | |
74 | #define CONFIG_SPI_FLASH_ISSI | |
75 | #define CONFIG_ENV_SPI_BUS 0 | |
76 | #define CONFIG_ENV_SPI_CS 1 | |
77 | ||
78 | #define CONFIG_SYS_SBFHDR_SIZE 0x7 | |
79 | ||
80 | #define CONFIG_SYS_DSPI_CTAR0 (DSPI_CTAR_TRSZ(7) | \ | |
81 | DSPI_CTAR_PCSSCK_1CLK | \ | |
82 | DSPI_CTAR_PASC(0) | \ | |
83 | DSPI_CTAR_PDT(0) | \ | |
84 | DSPI_CTAR_CSSCK(0) | \ | |
85 | DSPI_CTAR_ASC(0) | \ | |
86 | DSPI_CTAR_DT(1) | \ | |
87 | DSPI_CTAR_BR(6)) | |
88 | #define CONFIG_SYS_DSPI_CTAR1 (CONFIG_SYS_DSPI_CTAR0) | |
89 | #define CONFIG_SYS_DSPI_CTAR2 (CONFIG_SYS_DSPI_CTAR0) | |
90 | ||
91 | /* Input, PCI, Flexbus, and VCO */ | |
92 | #define CONFIG_EXTRA_CLOCK | |
93 | ||
94 | #define CONFIG_PRAM 2048 /* 2048 KB */ | |
95 | #define CONFIG_SYS_LONGHELP | |
96 | #define CONFIG_AUTO_COMPLETE | |
97 | #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ | |
98 | ||
99 | /* Print Buffer Size */ | |
100 | #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ | |
101 | sizeof(CONFIG_SYS_PROMPT) + 16) | |
102 | #define CONFIG_SYS_MAXARGS 16 | |
103 | /* Boot Argument Buffer Size */ | |
104 | #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE | |
105 | ||
106 | #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x10000) | |
107 | #define CONFIG_SYS_MBAR 0xFC000000 | |
108 | ||
109 | /* | |
110 | * Definitions for initial stack pointer and data area (in internal SRAM) | |
111 | */ | |
112 | #define CONFIG_SYS_INIT_RAM_ADDR 0x80000000 | |
113 | /* End of used area in internal SRAM */ | |
114 | #define CONFIG_SYS_INIT_RAM_SIZE 0x10000 | |
115 | #define CONFIG_SYS_INIT_RAM_CTRL 0x221 | |
116 | #define CONFIG_SYS_GBL_DATA_OFFSET ((CONFIG_SYS_INIT_RAM_SIZE - \ | |
117 | GENERATED_GBL_DATA_SIZE) - 32) | |
118 | #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET | |
119 | #define CONFIG_SYS_SBFHDR_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - 32) | |
120 | ||
121 | /* | |
122 | * Start addresses for the final memory configuration | |
123 | * (Set up by the startup code) | |
124 | * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 | |
125 | */ | |
126 | #define CONFIG_SYS_SDRAM_BASE 0x40000000 | |
127 | #define CONFIG_SYS_SDRAM_SIZE 128 /* SDRAM size in MB */ | |
128 | ||
129 | #define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE + 0x400) | |
130 | #define CONFIG_SYS_MEMTEST_END ((CONFIG_SYS_SDRAM_SIZE - 3) << 20) | |
131 | #define CONFIG_SYS_DRAM_TEST | |
132 | ||
133 | #if defined(CONFIG_CF_SBF) | |
134 | #define CONFIG_SERIAL_BOOT | |
135 | #endif | |
136 | ||
137 | #if defined(CONFIG_SERIAL_BOOT) | |
138 | #define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_TEXT_BASE + 0x400) | |
139 | #else | |
140 | #define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400) | |
141 | #endif | |
142 | ||
143 | #define CONFIG_SYS_BOOTPARAMS_LEN (64 * 1024) | |
144 | /* Reserve 256 kB for Monitor */ | |
145 | #define CONFIG_SYS_MONITOR_LEN (256 << 10) | |
146 | /* Reserve 256 kB for malloc() */ | |
147 | #define CONFIG_SYS_MALLOC_LEN (256 << 10) | |
148 | ||
149 | /* | |
150 | * For booting Linux, the board info and command line data | |
151 | * have to be in the first 8 MB of memory, since this is | |
152 | * the maximum mapped by the Linux kernel during initialization ?? | |
153 | */ | |
154 | /* Initial Memory map for Linux */ | |
155 | #define CONFIG_SYS_BOOTMAPSZ (CONFIG_SYS_SDRAM_BASE + \ | |
156 | (CONFIG_SYS_SDRAM_SIZE << 20)) | |
157 | ||
158 | /* Configuration for environment | |
159 | * Environment is embedded in u-boot in the second sector of the flash | |
160 | */ | |
161 | ||
162 | #if defined(CONFIG_CF_SBF) | |
163 | #define CONFIG_ENV_IS_IN_SPI_FLASH 1 | |
164 | #define CONFIG_ENV_SPI_CS 1 | |
165 | #define CONFIG_ENV_OFFSET 0x40000 | |
166 | #define CONFIG_ENV_SIZE 0x2000 | |
167 | #define CONFIG_ENV_SECT_SIZE 0x10000 | |
168 | #endif | |
169 | ||
170 | #undef CONFIG_ENV_OVERWRITE | |
171 | ||
172 | /* Cache Configuration */ | |
173 | #define CONFIG_SYS_CACHELINE_SIZE 16 | |
174 | #define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ | |
175 | CONFIG_SYS_INIT_RAM_SIZE - 8) | |
176 | #define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ | |
177 | CONFIG_SYS_INIT_RAM_SIZE - 4) | |
178 | #define CONFIG_SYS_ICACHE_INV (CF_CACR_BCINVA + CF_CACR_ICINVA) | |
179 | #define CONFIG_SYS_DCACHE_INV (CF_CACR_DCINVA) | |
180 | #define CONFIG_SYS_CACHE_ACR2 (CONFIG_SYS_SDRAM_BASE | \ | |
181 | CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ | |
182 | CF_ACR_EN | CF_ACR_SM_ALL) | |
183 | #define CONFIG_SYS_CACHE_ICACR (CF_CACR_BEC | CF_CACR_IEC | \ | |
184 | CF_CACR_ICINVA | CF_CACR_EUSP) | |
185 | #define CONFIG_SYS_CACHE_DCACR ((CONFIG_SYS_CACHE_ICACR | \ | |
186 | CF_CACR_DEC | CF_CACR_DDCM_P | \ | |
187 | CF_CACR_DCINVA) & ~CF_CACR_ICINVA) | |
188 | ||
189 | #define CACR_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ | |
190 | CONFIG_SYS_INIT_RAM_SIZE - 12) | |
191 | ||
192 | #endif /* __STMARK2_CONFIG_H */ |