[people/ms/u-boot.git] / include / configs / stxssa.h

/*
 * (C) Copyright 2005 Embedded Alley Solutions, Inc.
 * Dan Malek <dan@embeddedalley.com>
 * Copied from STx GP3.
 * Updates for Silicon Tx GP3 SSA board.
 *
 * (C) Copyright 2002,2003 Motorola,Inc.
 * Xianghua Xiao <X.Xiao@motorola.com>
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

/* mpc8560ads board configuration file */
/* please refer to doc/README.mpc85xx for more info */
/* make sure you change the MAC address and other network params first,
 * search for CONFIG_ETHADDR,CONFIG_SERVERIP,etc in this file
 */

#ifndef __CONFIG_H
#define __CONFIG_H

/* High Level Configuration Options */
#define CONFIG_BOOKE		1	/* BOOKE		*/
#define CONFIG_E500		1	/* BOOKE e500 family	*/
#define CONFIG_MPC85xx		1	/* MPC8540/MPC8560	*/
#define CONFIG_CPM2		1	/* has CPM2 */
#define CONFIG_STXSSA		1	/* Silicon Tx GPPP SSA board specific*/
#define CONFIG_MPC8560		1

#define	CONFIG_SYS_TEXT_BASE	0xFFF80000

#define CONFIG_PCI			/* PCI ethernet support	*/
#define CONFIG_PCI_INDIRECT_BRIDGE	/* indirect PCI bridge support */
#define CONFIG_TSEC_ENET		/* tsec ethernet support*/
#undef CONFIG_ETHER_ON_FCC		/* cpm FCC ethernet support */
#define CONFIG_ENV_OVERWRITE

#define CONFIG_FSL_LAW		1	/* Use common FSL init code */

/* sysclk for MPC85xx
 */

#define CONFIG_SYS_CLK_FREQ	33000000 /* most pci cards are 33Mhz */

/* Blinkin' LEDs for Robert :-)
*/
#define CONFIG_SHOW_ACTIVITY 1

/*
 * These can be toggled for performance analysis, otherwise use default.
 */
#define CONFIG_L2_CACHE				/* toggle L2 cache	       */
#define  CONFIG_BTB				/* toggle branch predition */

#define CONFIG_BOARD_EARLY_INIT_F   1		/* Call board_pre_init	 */

#undef	CONFIG_SYS_DRAM_TEST				/* memory test, takes time	*/
#define CONFIG_SYS_MEMTEST_START	0x00200000	/* memtest region */
#define CONFIG_SYS_MEMTEST_END		0x00400000


/* Localbus connector.	There are many options that can be
 * connected here, including sdram or lots of flash.
 * This address, however, is used to configure a 256M local bus
 * window that includes the Config latch below.
 */
#define CONFIG_SYS_LBC_OPTION_BASE	0xF0000000	/* Localbus Extension */
#define CONFIG_SYS_LBC_OPTION_SIZE	256		/* 256MB */

/* There are various flash options used, we configure for the largest,
 * which is 64Mbytes.  The CFI works fine and will discover the proper
 * sizes.
 */
#ifdef CONFIG_STXSSA_4M
#define CONFIG_SYS_FLASH_BASE		0xFFC00000	/* start of  4 MiB flash */
#else
#define CONFIG_SYS_FLASH_BASE		0xFC000000	/* start of 64 MiB flash */
#endif
#define CONFIG_SYS_BR0_PRELIM	(CONFIG_SYS_FLASH_BASE | 0x1801) /* port size 32bit	 */
#define CONFIG_SYS_OR0_PRELIM	(CONFIG_SYS_FLASH_BASE | 0x0FF7)

#define CONFIG_SYS_FLASH_CFI		1
#define CONFIG_FLASH_CFI_DRIVER	1
#undef CONFIG_SYS_FLASH_USE_BUFFER_WRITE	/* use buffered writes (20x faster) */
#define CONFIG_SYS_MAX_FLASH_SECT	256	/* max number of sectors on one chip */
#define CONFIG_SYS_MAX_FLASH_BANKS	1	/* max number of memory banks	*/

#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }

#define CONFIG_SYS_FLASH_PROTECTION

/* The configuration latch is Chip Select 1.
 * It's an 8-bit latch in the lower 8 bits of the word.
 */
#define CONFIG_SYS_LBC_CFGLATCH_BASE	0xFB000000	/* Base of config latch */
#define CONFIG_SYS_BR1_PRELIM		0xFB001801	/* 32-bit port */
#define CONFIG_SYS_OR1_PRELIM		0xFFFF0FF7	/* 64K is enough */

#define CONFIG_SYS_MONITOR_BASE	CONFIG_SYS_TEXT_BASE	/* start of monitor	*/

#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
#define CONFIG_SYS_RAMBOOT
#else
#undef	CONFIG_SYS_RAMBOOT
#endif

#ifdef CONFIG_SYS_RAMBOOT
#define CONFIG_SYS_CCSRBAR_DEFAULT	0x40000000	/* CCSRBAR by BDI cfg	*/
#endif

#define CONFIG_SYS_CCSRBAR		0xe0000000
#define CONFIG_SYS_CCSRBAR_PHYS_LOW	CONFIG_SYS_CCSRBAR

/* DDR Setup */
#define CONFIG_SYS_FSL_DDR1
#define CONFIG_SPD_EEPROM		/* Use SPD EEPROM for DDR setup*/
#define CONFIG_DDR_SPD
#undef CONFIG_FSL_DDR_INTERACTIVE

#undef	CONFIG_DDR_ECC			/* only for ECC DDR module */
#define CONFIG_DDR_2T_TIMING		/* Sets the 2T timing bit */

#define CONFIG_MEM_INIT_VALUE		0xDeadBeef

#define CONFIG_SYS_DDR_SDRAM_BASE	0x00000000	/* DDR is system memory*/
#define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE

#define CONFIG_NUM_DDR_CONTROLLERS	1
#define CONFIG_DIMM_SLOTS_PER_CTLR	1
#define CONFIG_CHIP_SELECTS_PER_CTRL	(2 * CONFIG_DIMM_SLOTS_PER_CTLR)

/* I2C addresses of SPD EEPROMs */
#define SPD_EEPROM_ADDRESS	0x54	/* CTLR 0 DIMM 0 */

#undef CONFIG_CLOCKS_IN_MHZ

/* local bus definitions */
#define CONFIG_SYS_BR2_PRELIM		0xf8001861	/* 64MB localbus SDRAM	*/
#define CONFIG_SYS_OR2_PRELIM		0xfc006901
#define CONFIG_SYS_LBC_LCRR		0x00030004	/* local bus freq	*/
#define CONFIG_SYS_LBC_LBCR		0x00000000
#define CONFIG_SYS_LBC_LSRT		0x20000000
#define CONFIG_SYS_LBC_MRTPR		0x20000000
#define CONFIG_SYS_LBC_LSDMR_1		0x2861b723
#define CONFIG_SYS_LBC_LSDMR_2		0x0861b723
#define CONFIG_SYS_LBC_LSDMR_3		0x0861b723
#define CONFIG_SYS_LBC_LSDMR_4		0x1861b723
#define CONFIG_SYS_LBC_LSDMR_5		0x4061b723

#define CONFIG_SYS_INIT_RAM_LOCK	1
#define CONFIG_SYS_INIT_RAM_ADDR	0x60000000	/* Initial RAM address	*/
#define CONFIG_SYS_INIT_RAM_SIZE	0x4000		/* Size of used area in RAM */

#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET

#define CONFIG_SYS_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Mon */
#define CONFIG_SYS_MALLOC_LEN		(512 * 1024)	/* Reserved for malloc */

/* Serial Port */
#define CONFIG_CONS_INDEX     2
#define CONFIG_SYS_NS16550
#define CONFIG_SYS_NS16550_SERIAL
#define CONFIG_SYS_NS16550_REG_SIZE	1
#define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)

#define CONFIG_SYS_BAUDRATE_TABLE  \
	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}

#define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_CCSRBAR+0x4500)
#define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_CCSRBAR+0x4600)

#define CONFIG_CMDLINE_EDITING	1	/* add command line history	*/
#define CONFIG_AUTO_COMPLETE	1	/* add autocompletion support   */
#define CONFIG_SYS_HUSH_PARSER		1	/* Use the HUSH parser		*/

/* pass open firmware flat tree */
#define CONFIG_OF_LIBFDT		1
#define CONFIG_OF_BOARD_SETUP		1
#define CONFIG_OF_STDOUT_VIA_ALIAS	1

/*
 * I2C
 */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_FSL
#define CONFIG_SYS_FSL_I2C_SPEED	400000
#define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
#define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
#undef CONFIG_SYS_I2C_NOPROBES

/* I2C RTC */
#define CONFIG_RTC_DS1337		/* This is really a DS1339 RTC	*/
#define CONFIG_SYS_I2C_RTC_ADDR	0x68	/* at address 0x68		*/

/* I2C EEPROM.	AT24C32, we keep our environment in here.
*/
#define CONFIG_SYS_I2C_EEPROM_ADDR		0x51	/* 1010001x		*/
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		2
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	5	/* =32 Bytes per write	*/
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	20

/*
 * Standard 8555 PCI mapping.
 * Addresses are mapped 1-1.
 */
#define CONFIG_SYS_PCI1_MEM_BASE	0x80000000
#define CONFIG_SYS_PCI1_MEM_PHYS	CONFIG_SYS_PCI1_MEM_BASE
#define CONFIG_SYS_PCI1_MEM_SIZE	0x20000000	/* 512M */
#define CONFIG_SYS_PCI1_IO_BASE	0x00000000
#define CONFIG_SYS_PCI1_IO_PHYS	0xe2000000
#define CONFIG_SYS_PCI1_IO_SIZE	0x01000000	/* 16M */

#define CONFIG_SYS_PCI2_MEM_BASE	0xa0000000
#define CONFIG_SYS_PCI2_MEM_PHYS	CONFIG_SYS_PCI2_MEM_BASE
#define CONFIG_SYS_PCI2_MEM_SIZE	0x20000000	/* 512M */
#define CONFIG_SYS_PCI2_IO_BASE	0x00000000
#define CONFIG_SYS_PCI2_IO_PHYS	0xe3000000
#define CONFIG_SYS_PCI2_IO_SIZE	0x01000000	/* 16M */

#if defined(CONFIG_PCI)			/* PCI Ethernet card */
#define CONFIG_MPC85XX_PCI2	1
#define CONFIG_PCI_PNP			/* do pci plug-and-play */

#define CONFIG_EEPRO100
#define CONFIG_TULIP

#if !defined(CONFIG_PCI_PNP)
  #define PCI_ENET0_IOADDR	0xe0000000
  #define PCI_ENET0_MEMADDR	0xe0000000
  #define PCI_IDSEL_NUMBER	0x0c	/* slot0->3(IDSEL)=12->15 */
#endif

#define CONFIG_PCI_SCAN_SHOW
#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1057	/* Motorola */

#endif /* CONFIG_PCI */

#if defined(CONFIG_TSEC_ENET)

#define CONFIG_MII		1	/* MII PHY management		*/

#define CONFIG_TSEC1	1
#define CONFIG_TSEC1_NAME	"TSEC0"
#define CONFIG_TSEC2	1
#define CONFIG_TSEC2_NAME	"TSEC1"

#define TSEC1_PHY_ADDR		2
#define TSEC2_PHY_ADDR		4
#define TSEC1_PHYIDX		0
#define TSEC2_PHYIDX		0
#define TSEC1_FLAGS		TSEC_GIGABIT
#define TSEC2_FLAGS		TSEC_GIGABIT
#define CONFIG_ETHPRIME		"TSEC0"

#elif defined(CONFIG_ETHER_ON_FCC)	/* CPM FCC Ethernet */

#define CONFIG_ETHER_ON_FCC2		/* define if ether on FCC   */
#undef	CONFIG_ETHER_NONE		/* define if ether on something else */
#define CONFIG_ETHER_INDEX	2	/* which channel for ether  */

#if (CONFIG_ETHER_INDEX == 2)
  /*
   * - Rx-CLK is CLK13
   * - Tx-CLK is CLK14
   * - Select bus for bd/buffers
   * - Full duplex
   */
  #define CONFIG_SYS_CMXFCR_MASK2	(CMXFCR_FC2 | CMXFCR_RF2CS_MSK | CMXFCR_TF2CS_MSK)
  #define CONFIG_SYS_CMXFCR_VALUE2	(CMXFCR_RF2CS_CLK13 | CMXFCR_TF2CS_CLK14)
  #define CONFIG_SYS_CPMFCR_RAMTYPE	0
#if 0
  #define CONFIG_SYS_FCC_PSMR		(FCC_PSMR_FDE)
#else
  #define CONFIG_SYS_FCC_PSMR		0
#endif
  #define FETH2_RST		0x01
#elif (CONFIG_ETHER_INDEX == 3)
  /* need more definitions here for FE3 */
  #define FETH3_RST		0x80
#endif					/* CONFIG_ETHER_INDEX */

/* MDIO is done through the TSEC0 control.
*/
#define CONFIG_MII			/* MII PHY management */
#undef CONFIG_BITBANGMII		/* bit-bang MII PHY management	*/

#endif

/* Environment - default config is in flash, see below */
#if 0	/* in EEPROM */
# define CONFIG_ENV_IS_IN_EEPROM	1
# define CONFIG_ENV_OFFSET		0
# define CONFIG_ENV_SIZE		2048
#else	/* in flash */
# define CONFIG_ENV_IS_IN_FLASH	1
# ifdef CONFIG_STXSSA_4M
#  define CONFIG_ENV_SECT_SIZE	0x20000
# else	/* default configuration - 64 MiB flash */
#  define CONFIG_ENV_SECT_SIZE	0x40000
# endif
# define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
# define CONFIG_ENV_SIZE		0x4000
# define CONFIG_ENV_ADDR_REDUND	(CONFIG_ENV_ADDR - CONFIG_ENV_SECT_SIZE)
# define CONFIG_ENV_SIZE_REDUND	(CONFIG_ENV_SIZE)
#endif

#define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
#define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/

#define	CONFIG_TIMESTAMP		/* Print image info with ts	*/


/*
 * BOOTP options
 */
#define CONFIG_BOOTP_BOOTFILESIZE
#define CONFIG_BOOTP_BOOTPATH
#define CONFIG_BOOTP_GATEWAY
#define CONFIG_BOOTP_HOSTNAME


/*
 * Command line configuration.
 */
#include <config_cmd_default.h>

#define CONFIG_CMD_DATE
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_EEPROM
#define CONFIG_CMD_I2C
#define CONFIG_CMD_NFS
#define CONFIG_CMD_PING
#define CONFIG_CMD_SNTP
#define CONFIG_CMD_REGINFO

#if defined(CONFIG_PCI)
    #define CONFIG_CMD_PCI
#endif

#if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC)
    #define CONFIG_CMD_MII
#endif

#if defined(CONFIG_SYS_RAMBOOT)
    #undef CONFIG_CMD_SAVEENV
    #undef CONFIG_CMD_LOADS
#else
    #define CONFIG_CMD_ELF
#endif


#undef CONFIG_WATCHDOG			/* watchdog disabled		*/

/*
 * Miscellaneous configurable options
 */
#define CONFIG_SYS_LONGHELP			/* undef to save memory		*/
#define CONFIG_SYS_PROMPT	"SSA=> "	/* Monitor Command Prompt	*/
#if defined(CONFIG_CMD_KGDB)
#define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size	*/
#else
#define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size	*/
#endif
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
#define CONFIG_SYS_MAXARGS	16		/* max number of command args	*/
#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size	*/
#define CONFIG_SYS_LOAD_ADDR	0x1000000	/* default load address */

/*
 * For booting Linux, the board info and command line data
 * have to be in the first 8 MB of memory, since this is
 * the maximum mapped by the Linux kernel during initialization.
 */
#define CONFIG_SYS_BOOTMAPSZ		(8 << 20) /* Initial Memory map for Linux */

#if defined(CONFIG_CMD_KGDB)
#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
#endif

/*Note: change below for your network setting!!! */
#if defined(CONFIG_TSEC_ENET) || defined(CONFIG_ETHER_ON_FCC)
#define CONFIG_HAS_ETH0
#define CONFIG_ETHADDR	 00:e0:0c:07:9b:8a
#define CONFIG_HAS_ETH1
#define CONFIG_ETH1ADDR  00:e0:0c:07:9b:8b
#define CONFIG_HAS_ETH2
#define CONFIG_ETH2ADDR  00:e0:0c:07:9b:8c
#endif

/*
 * Environment in EEPROM is compatible with different flash sector sizes,
 * but only little space is available, so we use a very simple setup.
 * With environment in flash, we use a more powerful default configuration.
 */
#ifdef CONFIG_ENV_IS_IN_EEPROM		/* use restricted "standard" environment */

#define CONFIG_BAUDRATE		38400

#define CONFIG_BOOTDELAY	3	/* -1 disable autoboot */
#define CONFIG_BOOTCOMMAND	"bootm 0xffc00000 0xffd00000"
#define CONFIG_BOOTARGS		"root=/dev/nfs rw ip=any console=ttyS1,$baudrate"
#define CONFIG_SERVERIP		192.168.85.1
#define CONFIG_IPADDR		192.168.85.60
#define CONFIG_GATEWAYIP	192.168.85.1
#define CONFIG_NETMASK		255.255.255.0
#define CONFIG_HOSTNAME		STX_SSA
#define CONFIG_ROOTPATH		"/gppproot"
#define CONFIG_BOOTFILE		"uImage"
#define CONFIG_LOADADDR		0x1000000

#else /* ENV IS IN FLASH		-- use a full-blown envionment */

#define CONFIG_BAUDRATE		115200

#define CONFIG_BOOTDELAY	5	/* -1 disable autoboot */

#define CONFIG_PREBOOT	"echo;"	\
	"echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
	"echo"

#undef	CONFIG_BOOTARGS		/* the boot command will set bootargs	*/

#define	CONFIG_EXTRA_ENV_SETTINGS					\
	"hostname=gp3ssa\0"						\
	"bootfile=/tftpboot/gp3ssa/uImage\0"				\
	"loadaddr=400000\0"						\
	"netdev=eth0\0"							\
	"consdev=ttyS1\0"						\
	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
		"nfsroot=$serverip:$rootpath\0"				\
	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
	"addip=setenv bootargs $bootargs "				\
		"ip=$ipaddr:$serverip:$gatewayip:$netmask"		\
		":$hostname:$netdev:off panic=1\0"			\
	"addcons=setenv bootargs $bootargs "				\
		"console=$consdev,$baudrate\0"				\
	"flash_nfs=run nfsargs addip addcons;"				\
		"bootm $kernel_addr\0"					\
	"flash_self=run ramargs addip addcons;"				\
		"bootm $kernel_addr $ramdisk_addr\0"			\
	"net_nfs=tftp $loadaddr $bootfile;"				\
		"run nfsargs addip addcons;bootm\0"			\
	"rootpath=/opt/eldk/ppc_85xx\0"					\
	"kernel_addr=FC000000\0"					\
	"ramdisk_addr=FC200000\0"					\
	""
#define CONFIG_BOOTCOMMAND	"run flash_self"

#endif	/* CONFIG_ENV_IS_IN_EEPROM */

#endif	/* __CONFIG_H */
Commit	Line	Data
35171dc0 DM	1	/*
	2	* (C) Copyright 2005 Embedded Alley Solutions, Inc.
	3	* Dan Malek <dan@embeddedalley.com>
	4	* Copied from STx GP3.
	5	* Updates for Silicon Tx GP3 SSA board.
	6	*
	7	* (C) Copyright 2002,2003 Motorola,Inc.
	8	* Xianghua Xiao <X.Xiao@motorola.com>
	9	*
3765b3e7	10	* SPDX-License-Identifier: GPL-2.0+
35171dc0 DM	11	*/
	12
	13	/* mpc8560ads board configuration file */
	14	/* please refer to doc/README.mpc85xx for more info */
	15	/* make sure you change the MAC address and other network params first,
	16	* search for CONFIG_ETHADDR,CONFIG_SERVERIP,etc in this file
	17	*/
	18
	19	#ifndef __CONFIG_H
	20	#define __CONFIG_H
	21
	22	/* High Level Configuration Options */
	23	#define CONFIG_BOOKE 1 /* BOOKE */
	24	#define CONFIG_E500 1 /* BOOKE e500 family */
	25	#define CONFIG_MPC85xx 1 /* MPC8540/MPC8560 */
	26	#define CONFIG_CPM2 1 /* has CPM2 */
	27	#define CONFIG_STXSSA 1 /* Silicon Tx GPPP SSA board specific*/
f060054d	28	#define CONFIG_MPC8560 1
35171dc0	29
28415b62	30	#define CONFIG_SYS_TEXT_BASE 0xFFF80000
2ae18241	31
f1152f8c	32	#define CONFIG_PCI /* PCI ethernet support */
842033e6	33	#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
f1152f8c WD	34	#define CONFIG_TSEC_ENET /* tsec ethernet support*/
f1152f8c WD	35	#undef CONFIG_ETHER_ON_FCC /* cpm FCC ethernet support */
35171dc0	36	#define CONFIG_ENV_OVERWRITE
35171dc0	37
572b13af	38	#define CONFIG_FSL_LAW 1 /* Use common FSL init code */
35171dc0 DM	39
	40	/* sysclk for MPC85xx
	41	*/
	42
f1152f8c	43	#define CONFIG_SYS_CLK_FREQ 33000000 /* most pci cards are 33Mhz */
35171dc0 DM	44
	45	/* Blinkin' LEDs for Robert :-)
	46	*/
	47	#define CONFIG_SHOW_ACTIVITY 1
	48
	49	/*
	50	* These can be toggled for performance analysis, otherwise use default.
	51	*/
f1152f8c WD	52	#define CONFIG_L2_CACHE /* toggle L2 cache */
f1152f8c WD	53	#define CONFIG_BTB /* toggle branch predition */
35171dc0	54
53677ef1	55	#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */
35171dc0	56
6d0f6bcf JCPV	57	#undef CONFIG_SYS_DRAM_TEST /* memory test, takes time */
	58	#define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest region */
	59	#define CONFIG_SYS_MEMTEST_END 0x00400000
35171dc0 DM	60
35171dc0 DM	61
f1152f8c	62	/* Localbus connector. There are many options that can be
35171dc0 DM	63	* connected here, including sdram or lots of flash.
	64	* This address, however, is used to configure a 256M local bus
	65	* window that includes the Config latch below.
	66	*/
6d0f6bcf JCPV	67	#define CONFIG_SYS_LBC_OPTION_BASE 0xF0000000 /* Localbus Extension */
6d0f6bcf JCPV	68	#define CONFIG_SYS_LBC_OPTION_SIZE 256 /* 256MB */
35171dc0 DM	69
	70	/* There are various flash options used, we configure for the largest,
	71	* which is 64Mbytes. The CFI works fine and will discover the proper
	72	* sizes.
	73	*/
ee152983	74	#ifdef CONFIG_STXSSA_4M
6d0f6bcf	75	#define CONFIG_SYS_FLASH_BASE 0xFFC00000 /* start of 4 MiB flash */
ee152983	76	#else
6d0f6bcf	77	#define CONFIG_SYS_FLASH_BASE 0xFC000000 /* start of 64 MiB flash */
ee152983	78	#endif
6d0f6bcf JCPV	79	#define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE \| 0x1801) /* port size 32bit */
6d0f6bcf JCPV	80	#define CONFIG_SYS_OR0_PRELIM (CONFIG_SYS_FLASH_BASE \| 0x0FF7)
35171dc0	81
6d0f6bcf	82	#define CONFIG_SYS_FLASH_CFI 1
00b1883a	83	#define CONFIG_FLASH_CFI_DRIVER 1
6d0f6bcf JCPV	84	#undef CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* use buffered writes (20x faster) */
	85	#define CONFIG_SYS_MAX_FLASH_SECT 256 /* max number of sectors on one chip */
	86	#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
35171dc0	87
6d0f6bcf	88	#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
35171dc0	89
6d0f6bcf	90	#define CONFIG_SYS_FLASH_PROTECTION
35171dc0 DM	91
	92	/* The configuration latch is Chip Select 1.
	93	* It's an 8-bit latch in the lower 8 bits of the word.
	94	*/
6d0f6bcf JCPV	95	#define CONFIG_SYS_LBC_CFGLATCH_BASE 0xFB000000 /* Base of config latch */
	96	#define CONFIG_SYS_BR1_PRELIM 0xFB001801 /* 32-bit port */
	97	#define CONFIG_SYS_OR1_PRELIM 0xFFFF0FF7 /* 64K is enough */
35171dc0	98
14d0a02a	99	#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
35171dc0	100
6d0f6bcf JCPV	101	#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
6d0f6bcf JCPV	102	#define CONFIG_SYS_RAMBOOT
35171dc0	103	#else
6d0f6bcf	104	#undef CONFIG_SYS_RAMBOOT
35171dc0 DM	105	#endif
35171dc0 DM	106
6d0f6bcf JCPV	107	#ifdef CONFIG_SYS_RAMBOOT
6d0f6bcf JCPV	108	#define CONFIG_SYS_CCSRBAR_DEFAULT 0x40000000 /* CCSRBAR by BDI cfg */
35171dc0	109	#endif
e46fedfe TT	110
	111	#define CONFIG_SYS_CCSRBAR 0xe0000000
	112	#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR
35171dc0	113
0e7927db	114	/* DDR Setup */
5614e71b	115	#define CONFIG_SYS_FSL_DDR1
0e7927db KG	116	#define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup*/
	117	#define CONFIG_DDR_SPD
	118	#undef CONFIG_FSL_DDR_INTERACTIVE
35171dc0	119
0e7927db	120	#undef CONFIG_DDR_ECC /* only for ECC DDR module */
0e7927db	121	#define CONFIG_DDR_2T_TIMING /* Sets the 2T timing bit */
35171dc0	122
0e7927db KG	123	#define CONFIG_MEM_INIT_VALUE 0xDeadBeef
0e7927db KG	124
6d0f6bcf JCPV	125	#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory*/
6d0f6bcf JCPV	126	#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
35171dc0	127
0e7927db KG	128	#define CONFIG_NUM_DDR_CONTROLLERS 1
	129	#define CONFIG_DIMM_SLOTS_PER_CTLR 1
	130	#define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR)
	131
	132	/* I2C addresses of SPD EEPROMs */
	133	#define SPD_EEPROM_ADDRESS 0x54 /* CTLR 0 DIMM 0 */
35171dc0 DM	134
	135	#undef CONFIG_CLOCKS_IN_MHZ
	136
	137	/* local bus definitions */
6d0f6bcf JCPV	138	#define CONFIG_SYS_BR2_PRELIM 0xf8001861 /* 64MB localbus SDRAM */
	139	#define CONFIG_SYS_OR2_PRELIM 0xfc006901
	140	#define CONFIG_SYS_LBC_LCRR 0x00030004 /* local bus freq */
	141	#define CONFIG_SYS_LBC_LBCR 0x00000000
	142	#define CONFIG_SYS_LBC_LSRT 0x20000000
	143	#define CONFIG_SYS_LBC_MRTPR 0x20000000
	144	#define CONFIG_SYS_LBC_LSDMR_1 0x2861b723
	145	#define CONFIG_SYS_LBC_LSDMR_2 0x0861b723
	146	#define CONFIG_SYS_LBC_LSDMR_3 0x0861b723
	147	#define CONFIG_SYS_LBC_LSDMR_4 0x1861b723
	148	#define CONFIG_SYS_LBC_LSDMR_5 0x4061b723
35171dc0	149
6d0f6bcf JCPV	150	#define CONFIG_SYS_INIT_RAM_LOCK 1
6d0f6bcf JCPV	151	#define CONFIG_SYS_INIT_RAM_ADDR 0x60000000 /* Initial RAM address */
553f0982	152	#define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in RAM */
35171dc0	153
25ddd1fb	154	#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
6d0f6bcf	155	#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
35171dc0	156
6d0f6bcf JCPV	157	#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
6d0f6bcf JCPV	158	#define CONFIG_SYS_MALLOC_LEN (512 * 1024) /* Reserved for malloc */
35171dc0 DM	159
	160	/* Serial Port */
	161	#define CONFIG_CONS_INDEX 2
6d0f6bcf JCPV	162	#define CONFIG_SYS_NS16550
	163	#define CONFIG_SYS_NS16550_SERIAL
	164	#define CONFIG_SYS_NS16550_REG_SIZE 1
	165	#define CONFIG_SYS_NS16550_CLK get_bus_freq(0)
35171dc0	166
6d0f6bcf	167	#define CONFIG_SYS_BAUDRATE_TABLE \
35171dc0 DM	168	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
35171dc0 DM	169
6d0f6bcf JCPV	170	#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500)
6d0f6bcf JCPV	171	#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600)
35171dc0	172
c64a89d6	173	#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
5be58f5f	174	#define CONFIG_AUTO_COMPLETE 1 /* add autocompletion support */
6d0f6bcf	175	#define CONFIG_SYS_HUSH_PARSER 1 /* Use the HUSH parser */
35171dc0	176
28415b62 WD	177	/* pass open firmware flat tree */
	178	#define CONFIG_OF_LIBFDT 1
	179	#define CONFIG_OF_BOARD_SETUP 1
	180	#define CONFIG_OF_STDOUT_VIA_ALIAS 1
	181
e1893815 WD	182	/*
	183	* I2C
	184	*/
00f792e0 HS	185	#define CONFIG_SYS_I2C
	186	#define CONFIG_SYS_I2C_FSL
	187	#define CONFIG_SYS_FSL_I2C_SPEED 400000
	188	#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F
	189	#define CONFIG_SYS_FSL_I2C_OFFSET 0x3000
6d0f6bcf	190	#undef CONFIG_SYS_I2C_NOPROBES
35171dc0	191
e1893815 WD	192	/* I2C RTC */
e1893815 WD	193	#define CONFIG_RTC_DS1337 /* This is really a DS1339 RTC */
6d0f6bcf	194	#define CONFIG_SYS_I2C_RTC_ADDR 0x68 /* at address 0x68 */
e1893815	195
f1152f8c	196	/* I2C EEPROM. AT24C32, we keep our environment in here.
35171dc0	197	*/
6d0f6bcf JCPV	198	#define CONFIG_SYS_I2C_EEPROM_ADDR 0x51 /* 1010001x */
	199	#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
	200	#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5 /* =32 Bytes per write */
	201	#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 20
35171dc0 DM	202
	203	/*
	204	* Standard 8555 PCI mapping.
	205	* Addresses are mapped 1-1.
	206	*/
6d0f6bcf JCPV	207	#define CONFIG_SYS_PCI1_MEM_BASE 0x80000000
	208	#define CONFIG_SYS_PCI1_MEM_PHYS CONFIG_SYS_PCI1_MEM_BASE
	209	#define CONFIG_SYS_PCI1_MEM_SIZE 0x20000000 /* 512M */
	210	#define CONFIG_SYS_PCI1_IO_BASE 0x00000000
	211	#define CONFIG_SYS_PCI1_IO_PHYS 0xe2000000
	212	#define CONFIG_SYS_PCI1_IO_SIZE 0x01000000 /* 16M */
	213
	214	#define CONFIG_SYS_PCI2_MEM_BASE 0xa0000000
	215	#define CONFIG_SYS_PCI2_MEM_PHYS CONFIG_SYS_PCI2_MEM_BASE
	216	#define CONFIG_SYS_PCI2_MEM_SIZE 0x20000000 /* 512M */
	217	#define CONFIG_SYS_PCI2_IO_BASE 0x00000000
	218	#define CONFIG_SYS_PCI2_IO_PHYS 0xe3000000
	219	#define CONFIG_SYS_PCI2_IO_SIZE 0x01000000 /* 16M */
35171dc0	220
53677ef1	221	#if defined(CONFIG_PCI) /* PCI Ethernet card */
38ad82da	222	#define CONFIG_MPC85XX_PCI2 1
f1152f8c	223	#define CONFIG_PCI_PNP /* do pci plug-and-play */
35171dc0	224
f1152f8c WD	225	#define CONFIG_EEPRO100
f1152f8c WD	226	#define CONFIG_TULIP
35171dc0 DM	227
35171dc0 DM	228	#if !defined(CONFIG_PCI_PNP)
f1152f8c WD	229	#define PCI_ENET0_IOADDR 0xe0000000
	230	#define PCI_ENET0_MEMADDR 0xe0000000
	231	#define PCI_IDSEL_NUMBER 0x0c /* slot0->3(IDSEL)=12->15 */
35171dc0 DM	232	#endif
35171dc0 DM	233
f1152f8c	234	#define CONFIG_PCI_SCAN_SHOW
6d0f6bcf	235	#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1057 /* Motorola */
35171dc0 DM	236
	237	#endif /* CONFIG_PCI */
	238
	239	#if defined(CONFIG_TSEC_ENET)
	240
35171dc0 DM	241	#define CONFIG_MII 1 /* MII PHY management */
35171dc0 DM	242
255a3577 KP	243	#define CONFIG_TSEC1 1
	244	#define CONFIG_TSEC1_NAME "TSEC0"
	245	#define CONFIG_TSEC2 1
	246	#define CONFIG_TSEC2_NAME "TSEC1"
35171dc0 DM	247
	248	#define TSEC1_PHY_ADDR 2
	249	#define TSEC2_PHY_ADDR 4
	250	#define TSEC1_PHYIDX 0
	251	#define TSEC2_PHYIDX 0
3a79013e AF	252	#define TSEC1_FLAGS TSEC_GIGABIT
3a79013e AF	253	#define TSEC2_FLAGS TSEC_GIGABIT
35171dc0 DM	254	#define CONFIG_ETHPRIME "TSEC0"
	255
	256	#elif defined(CONFIG_ETHER_ON_FCC) /* CPM FCC Ethernet */
	257
f1152f8c WD	258	#define CONFIG_ETHER_ON_FCC2 /* define if ether on FCC */
	259	#undef CONFIG_ETHER_NONE /* define if ether on something else */
	260	#define CONFIG_ETHER_INDEX 2 /* which channel for ether */
35171dc0 DM	261
	262	#if (CONFIG_ETHER_INDEX == 2)
	263	/*
	264	* - Rx-CLK is CLK13
	265	* - Tx-CLK is CLK14
	266	* - Select bus for bd/buffers
	267	* - Full duplex
	268	*/
d4590da4 MF	269	#define CONFIG_SYS_CMXFCR_MASK2 (CMXFCR_FC2 \| CMXFCR_RF2CS_MSK \| CMXFCR_TF2CS_MSK)
d4590da4 MF	270	#define CONFIG_SYS_CMXFCR_VALUE2 (CMXFCR_RF2CS_CLK13 \| CMXFCR_TF2CS_CLK14)
6d0f6bcf	271	#define CONFIG_SYS_CPMFCR_RAMTYPE 0
35171dc0	272	#if 0
6d0f6bcf	273	#define CONFIG_SYS_FCC_PSMR (FCC_PSMR_FDE)
35171dc0	274	#else
6d0f6bcf	275	#define CONFIG_SYS_FCC_PSMR 0
35171dc0 DM	276	#endif
	277	#define FETH2_RST 0x01
	278	#elif (CONFIG_ETHER_INDEX == 3)
	279	/* need more definitions here for FE3 */
	280	#define FETH3_RST 0x80
f1152f8c	281	#endif /* CONFIG_ETHER_INDEX */
35171dc0 DM	282
	283	/* MDIO is done through the TSEC0 control.
	284	*/
	285	#define CONFIG_MII /* MII PHY management */
	286	#undef CONFIG_BITBANGMII /* bit-bang MII PHY management */
	287
	288	#endif
	289
c64a89d6 WD	290	/* Environment - default config is in flash, see below */
c64a89d6 WD	291	#if 0 /* in EEPROM */
bb1f8b4f	292	# define CONFIG_ENV_IS_IN_EEPROM 1
0e8d1586 JCPV	293	# define CONFIG_ENV_OFFSET 0
0e8d1586 JCPV	294	# define CONFIG_ENV_SIZE 2048
c64a89d6	295	#else /* in flash */
5a1aceb0	296	# define CONFIG_ENV_IS_IN_FLASH 1
ee152983	297	# ifdef CONFIG_STXSSA_4M
0e8d1586	298	# define CONFIG_ENV_SECT_SIZE 0x20000
ee152983	299	# else /* default configuration - 64 MiB flash */
0e8d1586	300	# define CONFIG_ENV_SECT_SIZE 0x40000
ee152983	301	# endif
6d0f6bcf	302	# define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
0e8d1586 JCPV	303	# define CONFIG_ENV_SIZE 0x4000
	304	# define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR - CONFIG_ENV_SECT_SIZE)
	305	# define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
35171dc0 DM	306	#endif
35171dc0 DM	307
35171dc0	308	#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
6d0f6bcf	309	#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
35171dc0	310
c64a89d6 WD	311	#define CONFIG_TIMESTAMP /* Print image info with ts */
c64a89d6 WD	312
2835e518	313
079a136c JL	314	/*
	315	* BOOTP options
	316	*/
	317	#define CONFIG_BOOTP_BOOTFILESIZE
	318	#define CONFIG_BOOTP_BOOTPATH
	319	#define CONFIG_BOOTP_GATEWAY
	320	#define CONFIG_BOOTP_HOSTNAME
	321
	322
2835e518 JL	323	/*
	324	* Command line configuration.
	325	*/
	326	#include <config_cmd_default.h>
	327
e1893815 WD	328	#define CONFIG_CMD_DATE
	329	#define CONFIG_CMD_DHCP
	330	#define CONFIG_CMD_EEPROM
2835e518	331	#define CONFIG_CMD_I2C
e1893815 WD	332	#define CONFIG_CMD_NFS
	333	#define CONFIG_CMD_PING
	334	#define CONFIG_CMD_SNTP
199e262e	335	#define CONFIG_CMD_REGINFO
2835e518 JL	336
	337	#if defined(CONFIG_PCI)
	338	#define CONFIG_CMD_PCI
	339	#endif
	340
	341	#if defined(CONFIG_TSEC_ENET) \|\| defined(CONFIG_ETHER_ON_FCC)
	342	#define CONFIG_CMD_MII
	343	#endif
	344
6d0f6bcf	345	#if defined(CONFIG_SYS_RAMBOOT)
bdab39d3	346	#undef CONFIG_CMD_SAVEENV
2835e518	347	#undef CONFIG_CMD_LOADS
35171dc0	348	#else
2835e518	349	#define CONFIG_CMD_ELF
35171dc0	350	#endif
2835e518	351
35171dc0 DM	352
	353	#undef CONFIG_WATCHDOG /* watchdog disabled */
	354
	355	/*
	356	* Miscellaneous configurable options
	357	*/
6d0f6bcf JCPV	358	#define CONFIG_SYS_LONGHELP /* undef to save memory */
6d0f6bcf JCPV	359	#define CONFIG_SYS_PROMPT "SSA=> " /* Monitor Command Prompt */
ef0df52a	360	#if defined(CONFIG_CMD_KGDB)
6d0f6bcf	361	#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
35171dc0	362	#else
6d0f6bcf	363	#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
35171dc0	364	#endif
6d0f6bcf JCPV	365	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
	366	#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
	367	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
	368	#define CONFIG_SYS_LOAD_ADDR 0x1000000 /* default load address */
35171dc0 DM	369
	370	/*
	371	* For booting Linux, the board info and command line data
	372	* have to be in the first 8 MB of memory, since this is
	373	* the maximum mapped by the Linux kernel during initialization.
	374	*/
6d0f6bcf	375	#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
35171dc0	376
ef0df52a	377	#if defined(CONFIG_CMD_KGDB)
35171dc0	378	#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
35171dc0 DM	379	#endif
	380
	381	/Note: change below for your network setting!!! /
	382	#if defined(CONFIG_TSEC_ENET) \|\| defined(CONFIG_ETHER_ON_FCC)
10327dc5	383	#define CONFIG_HAS_ETH0
35171dc0 DM	384	#define CONFIG_ETHADDR 00:e0:0c:07:9b:8a
	385	#define CONFIG_HAS_ETH1
	386	#define CONFIG_ETH1ADDR 00:e0:0c:07:9b:8b
	387	#define CONFIG_HAS_ETH2
	388	#define CONFIG_ETH2ADDR 00:e0:0c:07:9b:8c
	389	#endif
	390
c64a89d6 WD	391	/*
	392	* Environment in EEPROM is compatible with different flash sector sizes,
	393	* but only little space is available, so we use a very simple setup.
	394	* With environment in flash, we use a more powerful default configuration.
	395	*/
bb1f8b4f	396	#ifdef CONFIG_ENV_IS_IN_EEPROM /* use restricted "standard" environment */
c64a89d6	397
f1152f8c	398	#define CONFIG_BAUDRATE 38400
c64a89d6 WD	399
	400	#define CONFIG_BOOTDELAY 3 /* -1 disable autoboot */
	401	#define CONFIG_BOOTCOMMAND "bootm 0xffc00000 0xffd00000"
	402	#define CONFIG_BOOTARGS "root=/dev/nfs rw ip=any console=ttyS1,$baudrate"
53677ef1	403	#define CONFIG_SERVERIP 192.168.85.1
f1152f8c	404	#define CONFIG_IPADDR 192.168.85.60
35171dc0 DM	405	#define CONFIG_GATEWAYIP 192.168.85.1
35171dc0 DM	406	#define CONFIG_NETMASK 255.255.255.0
53677ef1	407	#define CONFIG_HOSTNAME STX_SSA
8b3637c6	408	#define CONFIG_ROOTPATH "/gppproot"
b3f44c21	409	#define CONFIG_BOOTFILE "uImage"
35171dc0 DM	410	#define CONFIG_LOADADDR 0x1000000
35171dc0 DM	411
c64a89d6 WD	412	#else /* ENV IS IN FLASH -- use a full-blown envionment */
c64a89d6 WD	413
f1152f8c	414	#define CONFIG_BAUDRATE 115200
c64a89d6 WD	415
	416	#define CONFIG_BOOTDELAY 5 /* -1 disable autoboot */
	417
	418	#define CONFIG_PREBOOT "echo;" \
	419	"echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
	420	"echo"
	421
	422	#undef CONFIG_BOOTARGS /* the boot command will set bootargs */
	423
	424	#define CONFIG_EXTRA_ENV_SETTINGS \
	425	"hostname=gp3ssa\0" \
	426	"bootfile=/tftpboot/gp3ssa/uImage\0" \
	427	"loadaddr=400000\0" \
	428	"netdev=eth0\0" \
	429	"consdev=ttyS1\0" \
	430	"nfsargs=setenv bootargs root=/dev/nfs rw " \
	431	"nfsroot=$serverip:$rootpath\0" \
	432	"ramargs=setenv bootargs root=/dev/ram rw\0" \
	433	"addip=setenv bootargs $bootargs " \
	434	"ip=$ipaddr:$serverip:$gatewayip:$netmask" \
	435	":$hostname:$netdev:off panic=1\0" \
	436	"addcons=setenv bootargs $bootargs " \
	437	"console=$consdev,$baudrate\0" \
	438	"flash_nfs=run nfsargs addip addcons;" \
	439	"bootm $kernel_addr\0" \
	440	"flash_self=run ramargs addip addcons;" \
	441	"bootm $kernel_addr $ramdisk_addr\0" \
	442	"net_nfs=tftp $loadaddr $bootfile;" \
	443	"run nfsargs addip addcons;bootm\0" \
	444	"rootpath=/opt/eldk/ppc_85xx\0" \
	445	"kernel_addr=FC000000\0" \
	446	"ramdisk_addr=FC200000\0" \
	447	""
	448	#define CONFIG_BOOTCOMMAND "run flash_self"
	449
bb1f8b4f	450	#endif /* CONFIG_ENV_IS_IN_EEPROM */
c64a89d6	451
35171dc0	452	#endif /* __CONFIG_H */