]>
Commit | Line | Data |
---|---|---|
ee52b188 YS |
1 | /* |
2 | * Copyright 2011-2012 Freescale Semiconductor, Inc. | |
3 | * | |
1a459660 | 4 | * SPDX-License-Identifier: GPL-2.0+ |
ee52b188 YS |
5 | */ |
6 | ||
7 | /* | |
8 | * Corenet DS style board configuration file | |
9 | */ | |
1cb19fbb YS |
10 | #ifndef __T4QDS_H |
11 | #define __T4QDS_H | |
69fdf900 | 12 | |
15672c6d | 13 | #define CONFIG_DISPLAY_BOARDINFO |
ee52b188 YS |
14 | #define CONFIG_CMD_REGINFO |
15 | ||
16 | /* High Level Configuration Options */ | |
17 | #define CONFIG_BOOKE | |
ee52b188 YS |
18 | #define CONFIG_E500 /* BOOKE e500 family */ |
19 | #define CONFIG_E500MC /* BOOKE e500mc family */ | |
20 | #define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ | |
ee52b188 YS |
21 | #define CONFIG_MP /* support multiple processors */ |
22 | ||
23 | #ifndef CONFIG_SYS_TEXT_BASE | |
e222b1f3 | 24 | #define CONFIG_SYS_TEXT_BASE 0xeff40000 |
ee52b188 YS |
25 | #endif |
26 | ||
27 | #ifndef CONFIG_RESET_VECTOR_ADDRESS | |
28 | #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc | |
29 | #endif | |
30 | ||
31 | #define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */ | |
32 | #define CONFIG_SYS_NUM_CPC CONFIG_NUM_DDR_CONTROLLERS | |
33 | #define CONFIG_FSL_IFC /* Enable IFC Support */ | |
34 | #define CONFIG_PCI /* Enable PCI/PCIE */ | |
b38eaec5 RD |
35 | #define CONFIG_PCIE1 /* PCIE controller 1 */ |
36 | #define CONFIG_PCIE2 /* PCIE controller 2 */ | |
37 | #define CONFIG_PCIE3 /* PCIE controller 3 */ | |
ee52b188 YS |
38 | #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ |
39 | #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ | |
40 | ||
41 | #define CONFIG_SYS_SRIO | |
42 | #define CONFIG_SRIO1 /* SRIO port 1 */ | |
43 | #define CONFIG_SRIO2 /* SRIO port 2 */ | |
44 | ||
45 | #define CONFIG_FSL_LAW /* Use common FSL init code */ | |
46 | ||
47 | #define CONFIG_ENV_OVERWRITE | |
48 | ||
ee52b188 YS |
49 | /* |
50 | * These can be toggled for performance analysis, otherwise use default. | |
51 | */ | |
52 | #define CONFIG_SYS_CACHE_STASHING | |
53 | #define CONFIG_BTB /* toggle branch predition */ | |
ee52b188 YS |
54 | #ifdef CONFIG_DDR_ECC |
55 | #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER | |
56 | #define CONFIG_MEM_INIT_VALUE 0xdeadbeef | |
57 | #endif | |
58 | ||
59 | #define CONFIG_ENABLE_36BIT_PHYS | |
60 | ||
ee52b188 YS |
61 | #define CONFIG_ADDR_MAP |
62 | #define CONFIG_SYS_NUM_ADDR_MAP 64 /* number of TLB1 entries */ | |
ee52b188 | 63 | |
ee52b188 YS |
64 | #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ |
65 | #define CONFIG_SYS_MEMTEST_END 0x00400000 | |
66 | #define CONFIG_SYS_ALT_MEMTEST | |
67 | #define CONFIG_PANIC_HANG /* do not reset board on panic */ | |
68 | ||
69 | /* | |
70 | * Config the L3 Cache as L3 SRAM | |
71 | */ | |
b6036993 SX |
72 | #define CONFIG_SYS_INIT_L3_ADDR 0xFFFC0000 |
73 | #define CONFIG_SYS_L3_SIZE (512 << 10) | |
74 | #define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024) | |
75 | #ifdef CONFIG_RAMBOOT_PBL | |
76 | #define CONFIG_ENV_ADDR (CONFIG_SPL_GD_ADDR + 4 * 1024) | |
77 | #endif | |
78 | #define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SPL_GD_ADDR + 12 * 1024) | |
79 | #define CONFIG_SPL_RELOC_MALLOC_SIZE (50 << 10) | |
80 | #define CONFIG_SPL_RELOC_STACK (CONFIG_SPL_GD_ADDR + 64 * 1024) | |
81 | #define CONFIG_SPL_RELOC_STACK_SIZE (22 << 10) | |
ee52b188 | 82 | |
ee52b188 YS |
83 | #define CONFIG_SYS_DCSRBAR 0xf0000000 |
84 | #define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull | |
ee52b188 | 85 | |
ee52b188 YS |
86 | /* |
87 | * DDR Setup | |
88 | */ | |
89 | #define CONFIG_VERY_BIG_RAM | |
90 | #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 | |
91 | #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE | |
92 | ||
93 | /* CONFIG_NUM_DDR_CONTROLLERS is defined in include/asm/config_mpc85xx.h */ | |
94 | #define CONFIG_DIMM_SLOTS_PER_CTLR 2 | |
95 | #define CONFIG_CHIP_SELECTS_PER_CTRL 4 | |
96 | #define CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE | |
97 | ||
98 | #define CONFIG_DDR_SPD | |
5614e71b | 99 | #define CONFIG_SYS_FSL_DDR3 |
ee52b188 | 100 | |
ee52b188 YS |
101 | /* |
102 | * IFC Definitions | |
103 | */ | |
104 | #define CONFIG_SYS_FLASH_BASE 0xe0000000 | |
ee52b188 | 105 | #define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE) |
ee52b188 | 106 | |
b6036993 SX |
107 | #ifdef CONFIG_SPL_BUILD |
108 | #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE | |
109 | #else | |
110 | #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ | |
111 | #endif | |
ee52b188 | 112 | |
ee52b188 YS |
113 | #define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */ |
114 | #define CONFIG_MISC_INIT_R | |
115 | ||
116 | #define CONFIG_HWCONFIG | |
117 | ||
118 | /* define to use L1 as initial stack */ | |
119 | #define CONFIG_L1_INIT_RAM | |
120 | #define CONFIG_SYS_INIT_RAM_LOCK | |
121 | #define CONFIG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */ | |
ee52b188 | 122 | #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf |
b3142e2c | 123 | #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW 0xfe03c000 |
ee52b188 YS |
124 | /* The assembler doesn't like typecast */ |
125 | #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ | |
126 | ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ | |
127 | CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) | |
ee52b188 YS |
128 | #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 |
129 | ||
130 | #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ | |
131 | GENERATED_GBL_DATA_SIZE) | |
132 | #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET | |
133 | ||
9307cbab | 134 | #define CONFIG_SYS_MONITOR_LEN (768 * 1024) |
ee52b188 YS |
135 | #define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) |
136 | ||
137 | /* Serial Port - controlled on board with jumper J8 | |
138 | * open - index 2 | |
139 | * shorted - index 1 | |
140 | */ | |
141 | #define CONFIG_CONS_INDEX 1 | |
ee52b188 YS |
142 | #define CONFIG_SYS_NS16550_SERIAL |
143 | #define CONFIG_SYS_NS16550_REG_SIZE 1 | |
144 | #define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)/2) | |
145 | ||
146 | #define CONFIG_SYS_BAUDRATE_TABLE \ | |
147 | {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} | |
148 | ||
149 | #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500) | |
150 | #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600) | |
151 | #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500) | |
152 | #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600) | |
153 | ||
ee52b188 | 154 | /* I2C */ |
00f792e0 HS |
155 | #define CONFIG_SYS_I2C |
156 | #define CONFIG_SYS_I2C_FSL | |
00f792e0 HS |
157 | #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F |
158 | #define CONFIG_SYS_FSL_I2C_OFFSET 0x118000 | |
00f792e0 HS |
159 | #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F |
160 | #define CONFIG_SYS_FSL_I2C2_OFFSET 0x118100 | |
161 | ||
ee52b188 YS |
162 | /* |
163 | * RapidIO | |
164 | */ | |
165 | #define CONFIG_SYS_SRIO1_MEM_VIRT 0xa0000000 | |
ee52b188 | 166 | #define CONFIG_SYS_SRIO1_MEM_PHYS 0xc20000000ull |
ee52b188 YS |
167 | #define CONFIG_SYS_SRIO1_MEM_SIZE 0x10000000 /* 256M */ |
168 | ||
169 | #define CONFIG_SYS_SRIO2_MEM_VIRT 0xb0000000 | |
ee52b188 | 170 | #define CONFIG_SYS_SRIO2_MEM_PHYS 0xc30000000ull |
ee52b188 YS |
171 | #define CONFIG_SYS_SRIO2_MEM_SIZE 0x10000000 /* 256M */ |
172 | ||
ee52b188 YS |
173 | /* |
174 | * General PCI | |
175 | * Memory space is mapped 1-1, but I/O space must start from 0. | |
176 | */ | |
177 | ||
178 | /* controller 1, direct to uli, tgtid 3, Base address 20000 */ | |
179 | #define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 | |
ee52b188 YS |
180 | #define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 |
181 | #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull | |
ee52b188 YS |
182 | #define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ |
183 | #define CONFIG_SYS_PCIE1_IO_VIRT 0xf8000000 | |
184 | #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 | |
ee52b188 | 185 | #define CONFIG_SYS_PCIE1_IO_PHYS 0xff8000000ull |
ee52b188 YS |
186 | #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ |
187 | ||
188 | /* controller 2, Slot 2, tgtid 2, Base address 201000 */ | |
189 | #define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000 | |
ee52b188 YS |
190 | #define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000 |
191 | #define CONFIG_SYS_PCIE2_MEM_PHYS 0xc20000000ull | |
ee52b188 YS |
192 | #define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */ |
193 | #define CONFIG_SYS_PCIE2_IO_VIRT 0xf8010000 | |
194 | #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 | |
ee52b188 | 195 | #define CONFIG_SYS_PCIE2_IO_PHYS 0xff8010000ull |
ee52b188 YS |
196 | #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ |
197 | ||
198 | /* controller 3, Slot 1, tgtid 1, Base address 202000 */ | |
199 | #define CONFIG_SYS_PCIE3_MEM_VIRT 0xc0000000 | |
ee52b188 YS |
200 | #define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000 |
201 | #define CONFIG_SYS_PCIE3_MEM_PHYS 0xc40000000ull | |
ee52b188 YS |
202 | #define CONFIG_SYS_PCIE3_MEM_SIZE 0x20000000 /* 512M */ |
203 | #define CONFIG_SYS_PCIE3_IO_VIRT 0xf8020000 | |
204 | #define CONFIG_SYS_PCIE3_IO_BUS 0x00000000 | |
ee52b188 | 205 | #define CONFIG_SYS_PCIE3_IO_PHYS 0xff8020000ull |
ee52b188 YS |
206 | #define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */ |
207 | ||
208 | /* controller 4, Base address 203000 */ | |
209 | #define CONFIG_SYS_PCIE4_MEM_BUS 0xe0000000 | |
210 | #define CONFIG_SYS_PCIE4_MEM_PHYS 0xc60000000ull | |
211 | #define CONFIG_SYS_PCIE4_MEM_SIZE 0x20000000 /* 512M */ | |
212 | #define CONFIG_SYS_PCIE4_IO_BUS 0x00000000 | |
213 | #define CONFIG_SYS_PCIE4_IO_PHYS 0xff8030000ull | |
214 | #define CONFIG_SYS_PCIE4_IO_SIZE 0x00010000 /* 64k */ | |
215 | ||
ee52b188 | 216 | #ifdef CONFIG_PCI |
842033e6 | 217 | #define CONFIG_PCI_INDIRECT_BRIDGE |
ee52b188 | 218 | #define CONFIG_PCI_PNP /* do pci plug-and-play */ |
ee52b188 YS |
219 | |
220 | #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ | |
221 | #define CONFIG_DOS_PARTITION | |
222 | #endif /* CONFIG_PCI */ | |
223 | ||
224 | /* SATA */ | |
225 | #ifdef CONFIG_FSL_SATA_V2 | |
226 | #define CONFIG_LIBATA | |
227 | #define CONFIG_FSL_SATA | |
228 | ||
229 | #define CONFIG_SYS_SATA_MAX_DEVICE 2 | |
230 | #define CONFIG_SATA1 | |
231 | #define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR | |
232 | #define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA | |
233 | #define CONFIG_SATA2 | |
234 | #define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR | |
235 | #define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA | |
236 | ||
237 | #define CONFIG_LBA48 | |
238 | #define CONFIG_CMD_SATA | |
239 | #define CONFIG_DOS_PARTITION | |
ee52b188 YS |
240 | #endif |
241 | ||
242 | #ifdef CONFIG_FMAN_ENET | |
243 | #define CONFIG_MII /* MII PHY management */ | |
244 | #define CONFIG_ETHPRIME "FM1@DTSEC1" | |
245 | #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ | |
246 | #endif | |
247 | ||
248 | /* | |
249 | * Environment | |
250 | */ | |
251 | #define CONFIG_LOADS_ECHO /* echo on for serial download */ | |
252 | #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ | |
253 | ||
254 | /* | |
255 | * Command line configuration. | |
256 | */ | |
ee52b188 | 257 | #define CONFIG_CMD_ERRATA |
ee52b188 | 258 | #define CONFIG_CMD_IRQ |
ee52b188 YS |
259 | |
260 | #ifdef CONFIG_PCI | |
261 | #define CONFIG_CMD_PCI | |
ee52b188 YS |
262 | #endif |
263 | ||
ee52b188 YS |
264 | /* |
265 | * Miscellaneous configurable options | |
266 | */ | |
267 | #define CONFIG_SYS_LONGHELP /* undef to save memory */ | |
268 | #define CONFIG_CMDLINE_EDITING /* Command-line editing */ | |
269 | #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ | |
270 | #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ | |
ee52b188 YS |
271 | #ifdef CONFIG_CMD_KGDB |
272 | #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ | |
273 | #else | |
274 | #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ | |
275 | #endif | |
276 | #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) | |
277 | #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ | |
278 | #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ | |
ee52b188 YS |
279 | |
280 | /* | |
281 | * For booting Linux, the board info and command line data | |
282 | * have to be in the first 64 MB of memory, since this is | |
283 | * the maximum mapped by the Linux kernel during initialization. | |
284 | */ | |
285 | #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial map for Linux*/ | |
286 | #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ | |
287 | ||
288 | #ifdef CONFIG_CMD_KGDB | |
289 | #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ | |
ee52b188 YS |
290 | #endif |
291 | ||
292 | /* | |
293 | * Environment Configuration | |
294 | */ | |
295 | #define CONFIG_ROOTPATH "/opt/nfsroot" | |
296 | #define CONFIG_BOOTFILE "uImage" | |
297 | #define CONFIG_UBOOTPATH "u-boot.bin" /* U-Boot image on TFTP server*/ | |
298 | ||
299 | /* default location for tftp and bootm */ | |
300 | #define CONFIG_LOADADDR 1000000 | |
301 | ||
ee52b188 YS |
302 | #define CONFIG_BAUDRATE 115200 |
303 | ||
ee52b188 YS |
304 | #define CONFIG_HVBOOT \ |
305 | "setenv bootargs config-addr=0x60000000; " \ | |
306 | "bootm 0x01000000 - 0x00f00000" | |
307 | ||
ee52b188 | 308 | #endif /* __CONFIG_H */ |