[people/ms/u-boot.git] / include / configs / thuban.h

/*
 * (C) Copyright 2013 Siemens Schweiz AG
 * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
 *
 * Based on:
 * U-Boot file:/include/configs/am335x_evm.h
 *
 * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __CONFIG_THUBAN_H
#define __CONFIG_THUBAN_H

#include "siemens-am33x-common.h"

#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_SYS_MPUCLK	300
#define DDR_PLL_FREQ	303
#undef CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC

#define BOARD_DFU_BUTTON_GPIO	27	/* Use as default */
#define GPIO_LAN9303_NRST	88	/* GPIO2_24 = gpio88 */

#define CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \
	"button_dfu0=27\0" \
	"led0=103,1,0\0" \
	"led1=64,0,1\0"

#undef CONFIG_DOS_PARTITION
#undef CONFIG_CMD_FAT

#define CONFIG_BOARD_LATE_INIT

 /* Physical Memory Map */
#define CONFIG_MAX_RAM_BANK_SIZE	(1024 << 20)	/* 1GB */

/* I2C Configuration */
#define CONFIG_SYS_I2C_SPEED		100000

#define CONFIG_SYS_I2C_EEPROM_ADDR              0x50
#define EEPROM_ADDR_DDR3 0x90
#define EEPROM_ADDR_CHIP 0x120

#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS	0x300

#undef CONFIG_SPL_NET_SUPPORT
#undef CONFIG_SPL_NET_VCI_STRING
#undef CONFIG_SPL_ETH_SUPPORT

#undef CONFIG_MII
#undef CONFIG_PHY_GIGE
#define CONFIG_PHY_SMSC

#define CONFIG_FACTORYSET

/* Watchdog */
#define CONFIG_OMAP_WATCHDOG

/* Define own nand partitions */
#define CONFIG_ENV_OFFSET_REDUND    0x2E0000
#define CONFIG_ENV_SIZE_REDUND      0x2000
#define CONFIG_ENV_RANGE        (4 * CONFIG_SYS_ENV_SECT_SIZE)


#define MTDPARTS_DEFAULT	MTDPARTS_DEFAULT_V2

#ifndef CONFIG_SPL_BUILD

/* Default env settings */
#define CONFIG_EXTRA_ENV_SETTINGS \
	"hostname=thuban\0" \
	"nand_img_size=0x400000\0" \
	"optargs=\0" \
	"preboot=draco_led 0\0" \
	CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \
	CONFIG_ENV_SETTINGS_V2 \
	CONFIG_ENV_SETTINGS_NAND_V2

#ifndef CONFIG_RESTORE_FLASH
/* set to negative value for no autoboot */
#define CONFIG_BOOTDELAY		3

#define CONFIG_BOOTCOMMAND \
"if dfubutton; then " \
	"run dfu_start; " \
	"reset; " \
"fi;" \
"run nand_boot;" \
"run nand_boot_backup;" \
"reset;"


#else
#define CONFIG_BOOTDELAY		0

#define CONFIG_BOOTCOMMAND			\
	"setenv autoload no; "			\
	"dhcp; "				\
	"if tftp 80000000 debrick.scr; then "	\
		"source 80000000; "		\
	"fi"
#endif
#endif	/* CONFIG_SPL_BUILD */
#endif	/* ! __CONFIG_THUBAN_H */
Commit	Line	Data
c0dcece7 HS	1	/*
	2	* (C) Copyright 2013 Siemens Schweiz AG
	3	* (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
	4	*
	5	* Based on:
	6	* U-Boot file:/include/configs/am335x_evm.h
	7	*
	8	* Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
	9	*
	10	* SPDX-License-Identifier: GPL-2.0+
	11	*/
	12
8c65a2fa HS	13	#ifndef __CONFIG_THUBAN_H
8c65a2fa HS	14	#define __CONFIG_THUBAN_H
c0dcece7 HS	15
	16	#include "siemens-am33x-common.h"
	17
61159b76 HS	18	#define CONFIG_DISPLAY_CPUINFO
61159b76 HS	19	#define CONFIG_SYS_MPUCLK 300
56eb3da4 SE	20	#define DDR_PLL_FREQ 303
56eb3da4 SE	21	#undef CONFIG_SPL_AM33XX_ENABLE_RTC32K_OSC
c0dcece7	22
8c65a2fa	23	#define BOARD_DFU_BUTTON_GPIO 27 /* Use as default */
cc07294b	24	#define GPIO_LAN9303_NRST 88 /* GPIO2_24 = gpio88 */
c0dcece7	25
61159b76 HS	26	#define CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \
	27	"button_dfu0=27\0" \
	28	"led0=103,1,0\0" \
	29	"led1=64,0,1\0"
	30
c0dcece7 HS	31	#undef CONFIG_DOS_PARTITION
	32	#undef CONFIG_CMD_FAT
	33
61159b76	34	#define CONFIG_BOARD_LATE_INIT
c0dcece7 HS	35
	36	/* Physical Memory Map */
	37	#define CONFIG_MAX_RAM_BANK_SIZE (1024 << 20) /* 1GB */
	38
	39	/* I2C Configuration */
	40	#define CONFIG_SYS_I2C_SPEED 100000
	41
	42	#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
	43	#define EEPROM_ADDR_DDR3 0x90
	44	#define EEPROM_ADDR_CHIP 0x120
	45
	46	#define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x300
	47
	48	#undef CONFIG_SPL_NET_SUPPORT
	49	#undef CONFIG_SPL_NET_VCI_STRING
	50	#undef CONFIG_SPL_ETH_SUPPORT
	51
	52	#undef CONFIG_MII
	53	#undef CONFIG_PHY_GIGE
c0dcece7 HS	54	#define CONFIG_PHY_SMSC
	55
	56	#define CONFIG_FACTORYSET
	57
	58	/* Watchdog */
	59	#define CONFIG_OMAP_WATCHDOG
	60
61159b76	61	/* Define own nand partitions */
8c65a2fa HS	62	#define CONFIG_ENV_OFFSET_REDUND 0x2E0000
	63	#define CONFIG_ENV_SIZE_REDUND 0x2000
	64	#define CONFIG_ENV_RANGE (4 * CONFIG_SYS_ENV_SECT_SIZE)
61159b76 HS	65
	66
	67	#define MTDPARTS_DEFAULT MTDPARTS_DEFAULT_V2
	68
c0dcece7 HS	69	#ifndef CONFIG_SPL_BUILD
	70
	71	/* Default env settings */
	72	#define CONFIG_EXTRA_ENV_SETTINGS \
8c65a2fa	73	"hostname=thuban\0" \
56eb3da4	74	"nand_img_size=0x400000\0" \
c0dcece7	75	"optargs=\0" \
61159b76 HS	76	"preboot=draco_led 0\0" \
	77	CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \
	78	CONFIG_ENV_SETTINGS_V2 \
	79	CONFIG_ENV_SETTINGS_NAND_V2
c0dcece7 HS	80
	81	#ifndef CONFIG_RESTORE_FLASH
	82	/* set to negative value for no autoboot */
	83	#define CONFIG_BOOTDELAY 3
	84
	85	#define CONFIG_BOOTCOMMAND \
	86	"if dfubutton; then " \
	87	"run dfu_start; " \
	88	"reset; " \
	89	"fi;" \
56eb3da4	90	"run nand_boot;" \
61159b76	91	"run nand_boot_backup;" \
56eb3da4 SE	92	"reset;"
56eb3da4 SE	93
c0dcece7 HS	94
	95	#else
	96	#define CONFIG_BOOTDELAY 0
	97
	98	#define CONFIG_BOOTCOMMAND \
	99	"setenv autoload no; " \
	100	"dhcp; " \
	101	"if tftp 80000000 debrick.scr; then " \
	102	"source 80000000; " \
	103	"fi"
	104	#endif
	105	#endif /* CONFIG_SPL_BUILD */
8c65a2fa	106	#endif /* ! __CONFIG_THUBAN_H */