[people/ms/u-boot.git] / include / configs / titanium.h

/*
 * Copyright (C) 2013 Stefan Roese <sr@denx.de>
 *
 * Configuration settings for the ProjectionDesign / Barco
 * Titanium board.
 *
 * Based on mx6qsabrelite.h which is:
 * Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License as
 * published by the Free Software Foundation; either version 2 of
 * the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
 * GNU General Public License for more details.
 */

#ifndef __CONFIG_H
#define __CONFIG_H

#include <asm/arch/imx-regs.h>
#include <asm/imx-common/gpio.h>

#define CONFIG_MX6
#define CONFIG_MX6Q
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_DISPLAY_BOARDINFO

#define MACH_TYPE_TITANIUM		3769
#define CONFIG_MACH_TYPE		MACH_TYPE_TITANIUM

#define CONFIG_CMDLINE_TAG
#define CONFIG_SETUP_MEMORY_TAGS
#define CONFIG_INITRD_TAG
#define CONFIG_REVISION_TAG

/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN		(2 * 1024 * 1024)

#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_MISC_INIT_R
#define CONFIG_MXC_GPIO

#define CONFIG_MXC_UART
#define CONFIG_MXC_UART_BASE		UART1_BASE

/* I2C Configs */
#define CONFIG_CMD_I2C
#define CONFIG_I2C_MULTI_BUS
#define CONFIG_I2C_MXC
#define CONFIG_SYS_I2C_SPEED		100000

/* MMC Configs */
#define CONFIG_FSL_ESDHC
#define CONFIG_FSL_USDHC
#define CONFIG_SYS_FSL_ESDHC_ADDR	0
#define CONFIG_SYS_FSL_USDHC_NUM	1

#define CONFIG_MMC
#define CONFIG_CMD_MMC
#define CONFIG_GENERIC_MMC
#define CONFIG_BOUNCE_BUFFER
#define CONFIG_CMD_EXT2
#define CONFIG_CMD_FAT
#define CONFIG_DOS_PARTITION

#define CONFIG_CMD_PING
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_MII
#define CONFIG_CMD_NET
#define CONFIG_FEC_MXC
#define CONFIG_MII
#define IMX_FEC_BASE			ENET_BASE_ADDR
#define CONFIG_FEC_XCV_TYPE		RGMII
#define CONFIG_FEC_MXC_PHYADDR		4
#define CONFIG_PHYLIB
#define CONFIG_PHY_MICREL
#define CONFIG_PHY_MICREL_KSZ9021

/* USB Configs */
#define CONFIG_CMD_USB
#define CONFIG_CMD_FAT
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_MX6
#define CONFIG_USB_STORAGE
#define CONFIG_MXC_USB_PORT	1
#define CONFIG_MXC_USB_PORTSC	(PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS	0

/* Miscellaneous commands */
#define CONFIG_CMD_BMODE

/* allow to overwrite serial and ethaddr */
#define CONFIG_ENV_OVERWRITE
#define CONFIG_CONS_INDEX		1
#define CONFIG_BAUDRATE			115200

/* Command definition */
#include <config_cmd_default.h>

#undef CONFIG_CMD_IMLS

#define CONFIG_BOOTDELAY		3

#define CONFIG_LOADADDR			0x12000000
#define CONFIG_SYS_TEXT_BASE		0x17800000

#define CONFIG_SYS_MEMTEST_START	0x10000000
#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + (500 << 20))

#define CONFIG_HOSTNAME			titanium
#define CONFIG_UBI_PART			ubi
#define CONFIG_UBIFS_VOLUME		rootfs0

#define MTDIDS_DEFAULT		"nand0=gpmi-nand"
#define MTDPARTS_DEFAULT	"mtdparts=gpmi-nand:16M(uboot),512k(env1)," \
				"512k(env2),-(ubi)"

#define CONFIG_EXTRA_ENV_SETTINGS \
	"kernel=" __stringify(CONFIG_HOSTNAME) "/uImage\0"		\
	"kernel_fs=/boot/uImage\0"					\
	"kernel_addr=11000000\0"					\
	"dtb=" __stringify(CONFIG_HOSTNAME) "/"				\
		__stringify(CONFIG_HOSTNAME) ".dtb\0"			\
	"dtb_fs=/boot/" __stringify(CONFIG_HOSTNAME) ".dtb\0"		\
	"dtb_addr=12800000\0"						\
	"script=boot.scr\0" \
	"uimage=uImage\0" \
	"console=ttymxc0\0" \
	"baudrate=115200\0" \
	"fdt_high=0xffffffff\0"	  \
	"initrd_high=0xffffffff\0" \
	"mmcdev=0\0" \
	"mmcpart=1\0" \
	"uimage=uImage\0" \
	"loadbootscript=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr}" \
		" ${script}\0" \
	"bootscript=echo Running bootscript from mmc ...; source\0" \
	"loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
	"mmcroot=/dev/mmcblk0p2\0" \
	"mmcargs=setenv bootargs console=${console},${baudrate} " \
		"root=${mmcroot} rootwait rw\0" \
	"bootmmc=run mmcargs; fatload mmc ${mmcdev}:${mmcpart} ${loadaddr}" \
		" ${uimage}; bootm\0" \
	"addip=setenv bootargs ${bootargs} "				\
		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
		":${hostname}:${netdev}:off panic=1\0"			\
	"addcon=setenv bootargs ${bootargs} console=ttymxc0,"		\
		"${baudrate}\0"						\
	"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"		\
	"rootpath=/opt/eldk-5.3/armv7a/rootfs-minimal-mtdutils\0"	\
	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
		"nfsroot=${serverip}:${rootpath}\0"			\
	"ubifs=" __stringify(CONFIG_HOSTNAME) "/ubifs.img\0"		\
	"part=" __stringify(CONFIG_UBI_PART) "\0"			\
	"boot_vol=0\0"							\
	"vol=" __stringify(CONFIG_UBIFS_VOLUME) "\0"			\
	"load_ubifs=tftp ${kernel_addr} ${ubifs}\0"			\
	"update_ubifs=ubi part ${part};ubi write ${kernel_addr} ${vol}"	\
		" ${filesize}\0"					\
	"upd_ubifs=run load_ubifs update_ubifs\0"			\
	"init_ubi=nand erase.part ubi;ubi part ${part};"		\
		"ubi create ${vol} c800000\0"				\
	"mtdids=" MTDIDS_DEFAULT "\0"					\
	"mtdparts=" MTDPARTS_DEFAULT "\0"				\
	"nand_ubifs=run ubifs_mount ubifs_load ubifsargs addip"		\
		" addcon addmtd;"					\
		"bootm ${kernel_addr} - ${dtb_addr}\0"			\
	"ubifsargs=set bootargs ubi.mtd=ubi "				\
		"root=ubi:rootfs${boot_vol} rootfstype=ubifs\0"		\
	"ubifs_mount=ubi part ubi;ubifsmount ubi:rootfs${boot_vol}\0"	\
	"ubifs_load=ubifsload ${kernel_addr} ${kernel_fs};"		\
		"ubifsload ${dtb_addr} ${dtb_fs};\0"			\
	"nand_ubifs=run ubifs_mount ubifs_load ubifsargs addip addcon "	\
		"addmtd;bootm ${kernel_addr} - ${dtb_addr}\0"		\
	"load_kernel=tftp ${kernel_addr} ${kernel}\0"			\
	"load_dtb=tftp ${dtb_addr} ${dtb}\0"				\
	"net_nfs=run load_dtb load_kernel; "				\
		"run nfsargs addip addcon addmtd;"			\
		"bootm ${kernel_addr} - ${dtb_addr}\0"			\
	"delenv=env default -a -f; saveenv; reset\0"

#define CONFIG_BOOTCOMMAND		"run nand_ubifs"

/* Miscellaneous configurable options */
#define CONFIG_SYS_LONGHELP
#define CONFIG_SYS_HUSH_PARSER
#define CONFIG_SYS_PROMPT		"Titanium > "
#define CONFIG_AUTO_COMPLETE
#define CONFIG_CMDLINE_EDITING
#define CONFIG_SYS_CONSOLE_INFO_QUIET	/* don't print console @ startup */

#define CONFIG_SYS_CBSIZE		256

/* Print Buffer Size */
#define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
					 sizeof(CONFIG_SYS_PROMPT) + 16)
#define CONFIG_SYS_MAXARGS		16
#define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE

#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
#define CONFIG_SYS_HZ			1000

/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS		1
#define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR
#define PHYS_SDRAM_SIZE			(512 << 20)

#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE

#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

/* FLASH and environment organization */
#define CONFIG_SYS_NO_FLASH

/* Enable NAND support */
#define CONFIG_CMD_NAND
#define CONFIG_CMD_NAND_TRIMFFS
#define CONFIG_CMD_TIME

#ifdef CONFIG_CMD_NAND

/* NAND stuff */
#define CONFIG_NAND_MXS
#define CONFIG_SYS_MAX_NAND_DEVICE	1
#define CONFIG_SYS_NAND_BASE		0x40000000
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_ONFI_DETECTION

/* DMA stuff, needed for GPMI/MXS NAND support */
#define CONFIG_APBH_DMA
#define CONFIG_APBH_DMA_BURST
#define CONFIG_APBH_DMA_BURST8

/* Environment in NAND */
#define CONFIG_ENV_IS_IN_NAND
#define CONFIG_ENV_OFFSET		(16 << 20)
#define CONFIG_ENV_SECT_SIZE		(128 << 10)
#define CONFIG_ENV_SIZE			CONFIG_ENV_SECT_SIZE
#define CONFIG_ENV_OFFSET_REDUND	(CONFIG_ENV_OFFSET + (512 << 10))
#define CONFIG_ENV_SIZE_REDUND		CONFIG_ENV_SIZE

#else /* CONFIG_CMD_NAND */

/* Environment in MMC */
#define CONFIG_ENV_SIZE			(8 << 10)
#define CONFIG_ENV_IS_IN_MMC
#define CONFIG_ENV_OFFSET		(6 * 64 * 1024)
#define CONFIG_SYS_MMC_ENV_DEV		0

#endif /* CONFIG_CMD_NAND */

/* UBI/UBIFS config options */
#define CONFIG_LZO
#define CONFIG_MTD_DEVICE
#define CONFIG_MTD_PARTITIONS
#define CONFIG_RBTREE
#define CONFIG_CMD_MTDPARTS
#define CONFIG_CMD_UBI
#define CONFIG_CMD_UBIFS

#define CONFIG_OF_LIBFDT
#define CONFIG_CMD_BOOTZ

#ifndef CONFIG_SYS_DCACHE_OFF
#define CONFIG_CMD_CACHE
#endif

#endif			       /* __CONFIG_H */
Commit	Line	Data
b29ca4a1 SR	1	/*
	2	* Copyright (C) 2013 Stefan Roese <sr@denx.de>
	3	*
	4	* Configuration settings for the ProjectionDesign / Barco
	5	* Titanium board.
	6	*
	7	* Based on mx6qsabrelite.h which is:
	8	* Copyright (C) 2010-2011 Freescale Semiconductor, Inc.
	9	*
	10	* This program is free software; you can redistribute it and/or
	11	* modify it under the terms of the GNU General Public License as
	12	* published by the Free Software Foundation; either version 2 of
	13	* the License, or (at your option) any later version.
	14	*
	15	* This program is distributed in the hope that it will be useful,
	16	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	17	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	18	* GNU General Public License for more details.
	19	*/
	20
	21	#ifndef __CONFIG_H
	22	#define __CONFIG_H
	23
	24	#include <asm/arch/imx-regs.h>
	25	#include <asm/imx-common/gpio.h>
	26
	27	#define CONFIG_MX6
	28	#define CONFIG_MX6Q
	29	#define CONFIG_DISPLAY_CPUINFO
	30	#define CONFIG_DISPLAY_BOARDINFO
	31
	32	#define MACH_TYPE_TITANIUM 3769
	33	#define CONFIG_MACH_TYPE MACH_TYPE_TITANIUM
	34
	35	#define CONFIG_CMDLINE_TAG
	36	#define CONFIG_SETUP_MEMORY_TAGS
	37	#define CONFIG_INITRD_TAG
	38	#define CONFIG_REVISION_TAG
	39
	40	/* Size of malloc() pool */
	41	#define CONFIG_SYS_MALLOC_LEN (2 * 1024 * 1024)
	42
	43	#define CONFIG_BOARD_EARLY_INIT_F
	44	#define CONFIG_MISC_INIT_R
	45	#define CONFIG_MXC_GPIO
	46
	47	#define CONFIG_MXC_UART
	48	#define CONFIG_MXC_UART_BASE UART1_BASE
	49
	50	/* I2C Configs */
	51	#define CONFIG_CMD_I2C
	52	#define CONFIG_I2C_MULTI_BUS
	53	#define CONFIG_I2C_MXC
	54	#define CONFIG_SYS_I2C_SPEED 100000
	55
	56	/* MMC Configs */
	57	#define CONFIG_FSL_ESDHC
	58	#define CONFIG_FSL_USDHC
	59	#define CONFIG_SYS_FSL_ESDHC_ADDR 0
	60	#define CONFIG_SYS_FSL_USDHC_NUM 1
	61
	62	#define CONFIG_MMC
	63	#define CONFIG_CMD_MMC
	64	#define CONFIG_GENERIC_MMC
65	#define CONFIG_BOUNCE_BUFFER
66	#define CONFIG_CMD_EXT2
67	#define CONFIG_CMD_FAT
68	#define CONFIG_DOS_PARTITION
69
70	#define CONFIG_CMD_PING
71	#define CONFIG_CMD_DHCP
72	#define CONFIG_CMD_MII
73	#define CONFIG_CMD_NET
74	#define CONFIG_FEC_MXC
75	#define CONFIG_MII
76	#define IMX_FEC_BASE ENET_BASE_ADDR
77	#define CONFIG_FEC_XCV_TYPE RGMII
78	#define CONFIG_FEC_MXC_PHYADDR 4
79	#define CONFIG_PHYLIB
80	#define CONFIG_PHY_MICREL
81	#define CONFIG_PHY_MICREL_KSZ9021
82
83	/* USB Configs */
84	#define CONFIG_CMD_USB
85	#define CONFIG_CMD_FAT
86	#define CONFIG_USB_EHCI
87	#define CONFIG_USB_EHCI_MX6
88	#define CONFIG_USB_STORAGE
89	#define CONFIG_MXC_USB_PORT 1
90	#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI \| PORT_PTS_PTW)
91	#define CONFIG_MXC_USB_FLAGS 0
92
93	/* Miscellaneous commands */
94	#define CONFIG_CMD_BMODE
95
96	/* allow to overwrite serial and ethaddr */
97	#define CONFIG_ENV_OVERWRITE
98	#define CONFIG_CONS_INDEX 1
99	#define CONFIG_BAUDRATE 115200
100
101	/* Command definition */
102	#include <config_cmd_default.h>
103
104	#undef CONFIG_CMD_IMLS
105
106	#define CONFIG_BOOTDELAY 3
107
108	#define CONFIG_LOADADDR 0x12000000
109	#define CONFIG_SYS_TEXT_BASE 0x17800000
110
111	#define CONFIG_SYS_MEMTEST_START 0x10000000
112	#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + (500 << 20))
113
114	#define CONFIG_HOSTNAME titanium
115	#define CONFIG_UBI_PART ubi
116	#define CONFIG_UBIFS_VOLUME rootfs0
117
118	#define MTDIDS_DEFAULT "nand0=gpmi-nand"
119	#define MTDPARTS_DEFAULT "mtdparts=gpmi-nand:16M(uboot),512k(env1)," \
120	"512k(env2),-(ubi)"
121
122	#define CONFIG_EXTRA_ENV_SETTINGS \
123	"kernel=" __stringify(CONFIG_HOSTNAME) "/uImage\0" \
124	"kernel_fs=/boot/uImage\0" \
125	"kernel_addr=11000000\0" \
126	"dtb=" __stringify(CONFIG_HOSTNAME) "/" \
127	__stringify(CONFIG_HOSTNAME) ".dtb\0" \
128	"dtb_fs=/boot/" __stringify(CONFIG_HOSTNAME) ".dtb\0" \
129	"dtb_addr=12800000\0" \
130	"script=boot.scr\0" \
131	"uimage=uImage\0" \
132	"console=ttymxc0\0" \
133	"baudrate=115200\0" \
134	"fdt_high=0xffffffff\0" \
135	"initrd_high=0xffffffff\0" \
136	"mmcdev=0\0" \
137	"mmcpart=1\0" \
138	"uimage=uImage\0" \
139	"loadbootscript=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr}" \
140	" ${script}\0" \
141	"bootscript=echo Running bootscript from mmc ...; source\0" \
142	"loaduimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${uimage}\0" \
143	"mmcroot=/dev/mmcblk0p2\0" \
144	"mmcargs=setenv bootargs console=${console},${baudrate} " \
145	"root=${mmcroot} rootwait rw\0" \
146	"bootmmc=run mmcargs; fatload mmc ${mmcdev}:${mmcpart} ${loadaddr}" \
147	" ${uimage}; bootm\0" \
148	"addip=setenv bootargs ${bootargs} " \
149	"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
150	":${hostname}:${netdev}:off panic=1\0" \
151	"addcon=setenv bootargs ${bootargs} console=ttymxc0," \
152	"${baudrate}\0" \
153	"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
154	"rootpath=/opt/eldk-5.3/armv7a/rootfs-minimal-mtdutils\0" \
155	"nfsargs=setenv bootargs root=/dev/nfs rw " \
156	"nfsroot=${serverip}:${rootpath}\0" \
157	"ubifs=" __stringify(CONFIG_HOSTNAME) "/ubifs.img\0" \
158	"part=" __stringify(CONFIG_UBI_PART) "\0" \
159	"boot_vol=0\0" \
160	"vol=" __stringify(CONFIG_UBIFS_VOLUME) "\0" \
161	"load_ubifs=tftp ${kernel_addr} ${ubifs}\0" \
162	"update_ubifs=ubi part ${part};ubi write ${kernel_addr} ${vol}" \
163	" ${filesize}\0" \
164	"upd_ubifs=run load_ubifs update_ubifs\0" \
165	"init_ubi=nand erase.part ubi;ubi part ${part};" \
166	"ubi create ${vol} c800000\0" \
167	"mtdids=" MTDIDS_DEFAULT "\0" \
168	"mtdparts=" MTDPARTS_DEFAULT "\0" \
169	"nand_ubifs=run ubifs_mount ubifs_load ubifsargs addip" \
170	" addcon addmtd;" \
171	"bootm ${kernel_addr} - ${dtb_addr}\0" \
172	"ubifsargs=set bootargs ubi.mtd=ubi " \
173	"root=ubi:rootfs${boot_vol} rootfstype=ubifs\0" \
174	"ubifs_mount=ubi part ubi;ubifsmount ubi:rootfs${boot_vol}\0" \
175	"ubifs_load=ubifsload ${kernel_addr} ${kernel_fs};" \
176	"ubifsload ${dtb_addr} ${dtb_fs};\0" \
177	"nand_ubifs=run ubifs_mount ubifs_load ubifsargs addip addcon " \
178	"addmtd;bootm ${kernel_addr} - ${dtb_addr}\0" \
179	"load_kernel=tftp ${kernel_addr} ${kernel}\0" \
180	"load_dtb=tftp ${dtb_addr} ${dtb}\0" \
181	"net_nfs=run load_dtb load_kernel; " \
182	"run nfsargs addip addcon addmtd;" \
183	"bootm ${kernel_addr} - ${dtb_addr}\0" \
184	"delenv=env default -a -f; saveenv; reset\0"
185
186	#define CONFIG_BOOTCOMMAND "run nand_ubifs"
187
188	/* Miscellaneous configurable options */
189	#define CONFIG_SYS_LONGHELP
190	#define CONFIG_SYS_HUSH_PARSER
191	#define CONFIG_SYS_PROMPT "Titanium > "
192	#define CONFIG_AUTO_COMPLETE
193	#define CONFIG_CMDLINE_EDITING
194	#define CONFIG_SYS_CONSOLE_INFO_QUIET /* don't print console @ startup */
195
196	#define CONFIG_SYS_CBSIZE 256
197
198	/* Print Buffer Size */
199	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
200	sizeof(CONFIG_SYS_PROMPT) + 16)
201	#define CONFIG_SYS_MAXARGS 16
202	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
203
204	#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
205	#define CONFIG_SYS_HZ 1000
206
207	/* Physical Memory Map */
208	#define CONFIG_NR_DRAM_BANKS 1
209	#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
210	#define PHYS_SDRAM_SIZE (512 << 20)
211
212	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
213	#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
214	#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
215
216	#define CONFIG_SYS_INIT_SP_OFFSET \
217	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
218	#define CONFIG_SYS_INIT_SP_ADDR \
219	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
220
221	/* FLASH and environment organization */
222	#define CONFIG_SYS_NO_FLASH
223
224	/* Enable NAND support */
225	#define CONFIG_CMD_NAND
226	#define CONFIG_CMD_NAND_TRIMFFS
227	#define CONFIG_CMD_TIME
228
229	#ifdef CONFIG_CMD_NAND
230
231	/* NAND stuff */
232	#define CONFIG_NAND_MXS
233	#define CONFIG_SYS_MAX_NAND_DEVICE 1
234	#define CONFIG_SYS_NAND_BASE 0x40000000
235	#define CONFIG_SYS_NAND_5_ADDR_CYCLE
236	#define CONFIG_SYS_NAND_ONFI_DETECTION
237
238	/* DMA stuff, needed for GPMI/MXS NAND support */
239	#define CONFIG_APBH_DMA
240	#define CONFIG_APBH_DMA_BURST
241	#define CONFIG_APBH_DMA_BURST8
242
243	/* Environment in NAND */
244	#define CONFIG_ENV_IS_IN_NAND
245	#define CONFIG_ENV_OFFSET (16 << 20)
246	#define CONFIG_ENV_SECT_SIZE (128 << 10)
247	#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
248	#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + (512 << 10))
249	#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
250
251	#else /* CONFIG_CMD_NAND */
252
253	/* Environment in MMC */
254	#define CONFIG_ENV_SIZE (8 << 10)
255	#define CONFIG_ENV_IS_IN_MMC
256	#define CONFIG_ENV_OFFSET (6 * 64 * 1024)
257	#define CONFIG_SYS_MMC_ENV_DEV 0
258
259	#endif /* CONFIG_CMD_NAND */
260
261	/* UBI/UBIFS config options */
262	#define CONFIG_LZO
263	#define CONFIG_MTD_DEVICE
264	#define CONFIG_MTD_PARTITIONS
265	#define CONFIG_RBTREE
266	#define CONFIG_CMD_MTDPARTS
267	#define CONFIG_CMD_UBI
268	#define CONFIG_CMD_UBIFS
269
270	#define CONFIG_OF_LIBFDT
271	#define CONFIG_CMD_BOOTZ
272
273	#ifndef CONFIG_SYS_DCACHE_OFF
274	#define CONFIG_CMD_CACHE
275	#endif
276
277	#endif /* __CONFIG_H */