[thirdparty/u-boot.git] / include / configs / turris_omnia.h

/*
 * Copyright (C) 2017 Marek Behun <marek.behun@nic.cz>
 * Copyright (C) 2016 Tomas Hlavacek <tomas.hlavacek@nic.cz>
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef _CONFIG_TURRIS_OMNIA_H
#define _CONFIG_TURRIS_OMNIA_H

/*
 * High Level Configuration Options (easy to change)
 */

#define CONFIG_MISC_INIT_R
#define CONFIG_DISPLAY_BOARDINFO_LATE

/*
 * TEXT_BASE needs to be below 16MiB, since this area is scrubbed
 * for DDR ECC byte filling in the SPL before loading the main
 * U-Boot into it.
 */
#define	CONFIG_SYS_TEXT_BASE	0x00800000
#define CONFIG_SYS_TCLK		250000000	/* 250MHz */

/*
 * Commands configuration
 */
#define CONFIG_CMD_PCI

/* I2C support */
#define CONFIG_DM_I2C
#define CONFIG_I2C_MUX
#define CONFIG_I2C_MUX_PCA954x
#define CONFIG_SPL_I2C_MUX
#define CONFIG_SYS_I2C_MVTWSI

/* Watchdog support */
#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_WDT_ORION)
# define CONFIG_WATCHDOG
#endif

/* SPI NOR flash default params, used by sf commands */
#define CONFIG_SF_DEFAULT_SPEED		1000000
#define CONFIG_SF_DEFAULT_MODE		SPI_MODE_3
#define CONFIG_SPI_FLASH
#define CONFIG_SPI_FLASH_SPANSION

/*
 * SDIO/MMC Card Configuration
 */
#define CONFIG_SYS_MMC_BASE		MVEBU_SDIO_BASE

/*
 * SATA/SCSI/AHCI configuration
 */
#define CONFIG_LIBATA
#define CONFIG_SCSI_AHCI
#define CONFIG_SCSI_AHCI_PLAT
#define CONFIG_SYS_SCSI_MAX_SCSI_ID	2
#define CONFIG_SYS_SCSI_MAX_LUN		1
#define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
					 CONFIG_SYS_SCSI_MAX_LUN)

/* Additional FS support/configuration */
#define CONFIG_SUPPORT_VFAT

/* USB/EHCI configuration */
#define CONFIG_EHCI_IS_TDI

/* Environment in SPI NOR flash */
#define CONFIG_ENV_OFFSET		(3*(1 << 18)) /* 768KiB in */
#define CONFIG_ENV_SIZE			(64 << 10) /* 64KiB */
#define CONFIG_ENV_SECT_SIZE		(256 << 10) /* 256KiB sectors */

#define CONFIG_PHY_MARVELL		/* there is a marvell phy */
#define PHY_ANEG_TIMEOUT	8000	/* PHY needs a longer aneg time */

/* PCIe support */
#ifndef CONFIG_SPL_BUILD
#define CONFIG_PCI_MVEBU
#define CONFIG_PCI_SCAN_SHOW
#endif

#define CONFIG_SYS_ALT_MEMTEST

/* Keep device tree and initrd in lower memory so the kernel can access them */
#define RELOCATION_LIMITS_ENV_SETTINGS	\
	"fdt_high=0x10000000\0"		\
	"initrd_high=0x10000000\0"

/* Defines for SPL */
#define CONFIG_SPL_FRAMEWORK
#define CONFIG_SPL_SIZE			(140 << 10)
#define CONFIG_SPL_TEXT_BASE		0x40000030
#define CONFIG_SPL_MAX_SIZE		(CONFIG_SPL_SIZE - 0x0030)

#define CONFIG_SPL_BSS_START_ADDR	(0x40000000 + CONFIG_SPL_SIZE)
#define CONFIG_SPL_BSS_MAX_SIZE		(16 << 10)

#ifdef CONFIG_SPL_BUILD
#define CONFIG_SYS_MALLOC_SIMPLE
#endif

#define CONFIG_SPL_STACK		(0x40000000 + ((192 - 16) << 10))
#define CONFIG_SPL_BOOTROM_SAVE		(CONFIG_SPL_STACK + 4)
#define CONFIG_SPL_DRIVERS_MISC_SUPPORT

#ifdef CONFIG_TURRIS_OMNIA_SPL_BOOT_DEVICE_SPI
/* SPL related SPI defines */
# define CONFIG_SPL_SPI_LOAD
# define CONFIG_SYS_SPI_U_BOOT_OFFS	0x24000
# define CONFIG_SYS_U_BOOT_OFFS		CONFIG_SYS_SPI_U_BOOT_OFFS
#endif

#ifdef CONFIG_TURRIS_OMNIA_SPL_BOOT_DEVICE_MMC
/* SPL related MMC defines */
# define CONFIG_SYS_MMC_U_BOOT_OFFS		(160 << 10)
# define CONFIG_SYS_U_BOOT_OFFS			CONFIG_SYS_MMC_U_BOOT_OFFS
# ifdef CONFIG_SPL_BUILD
#  define CONFIG_FIXED_SDHCI_ALIGNED_BUFFER	0x00180000	/* in SDRAM */
# endif
#endif

/*
 * mv-common.h should be defined after CMD configs since it used them
 * to enable certain macros
 */
#include "mv-common.h"

/* Include the common distro boot environment */
#ifndef CONFIG_SPL_BUILD
#include <config_distro_defaults.h>

#ifdef CONFIG_MMC
#define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0)
#else
#define BOOT_TARGET_DEVICES_MMC(func)
#endif

#ifdef CONFIG_USB_STORAGE
#define BOOT_TARGET_DEVICES_USB(func) func(USB, usb, 0)
#else
#define BOOT_TARGET_DEVICES_USB(func)
#endif

#define BOOT_TARGET_DEVICES(func) \
	BOOT_TARGET_DEVICES_MMC(func) \
	BOOT_TARGET_DEVICES_USB(func) \
	func(PXE, pxe, na) \
	func(DHCP, dhcp, na)

#define KERNEL_ADDR_R	__stringify(0x1000000)
#define FDT_ADDR_R	__stringify(0x2000000)
#define RAMDISK_ADDR_R	__stringify(0x2200000)
#define SCRIPT_ADDR_R	__stringify(0x1800000)
#define PXEFILE_ADDR_R	__stringify(0x1900000)

#define LOAD_ADDRESS_ENV_SETTINGS \
	"kernel_addr_r=" KERNEL_ADDR_R "\0" \
	"fdt_addr_r=" FDT_ADDR_R "\0" \
	"ramdisk_addr_r=" RAMDISK_ADDR_R "\0" \
	"scriptaddr=" SCRIPT_ADDR_R "\0" \
	"pxefile_addr_r=" PXEFILE_ADDR_R "\0"

#include <config_distro_bootcmd.h>

#define CONFIG_EXTRA_ENV_SETTINGS \
	RELOCATION_LIMITS_ENV_SETTINGS \
	LOAD_ADDRESS_ENV_SETTINGS \
	"fdtfile=" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \
	"console=ttyS0,115200\0" \
	BOOTENV

#endif /* CONFIG_SPL_BUILD */

#endif /* _CONFIG_TURRIS_OMNIA_H */
Commit	Line	Data
b6ee860b MB	1	/*
	2	* Copyright (C) 2017 Marek Behun <marek.behun@nic.cz>
	3	* Copyright (C) 2016 Tomas Hlavacek <tomas.hlavacek@nic.cz>
	4	*
	5	* SPDX-License-Identifier: GPL-2.0+
	6	*/
	7
	8	#ifndef _CONFIG_TURRIS_OMNIA_H
	9	#define _CONFIG_TURRIS_OMNIA_H
	10
	11	/*
	12	* High Level Configuration Options (easy to change)
	13	*/
	14
	15	#define CONFIG_MISC_INIT_R
	16	#define CONFIG_DISPLAY_BOARDINFO_LATE
	17
	18	/*
	19	* TEXT_BASE needs to be below 16MiB, since this area is scrubbed
	20	* for DDR ECC byte filling in the SPL before loading the main
	21	* U-Boot into it.
	22	*/
	23	#define CONFIG_SYS_TEXT_BASE 0x00800000
	24	#define CONFIG_SYS_TCLK 250000000 /* 250MHz */
	25
	26	/*
	27	* Commands configuration
	28	*/
	29	#define CONFIG_CMD_PCI
	30
	31	/* I2C support */
	32	#define CONFIG_DM_I2C
	33	#define CONFIG_I2C_MUX
	34	#define CONFIG_I2C_MUX_PCA954x
	35	#define CONFIG_SPL_I2C_MUX
	36	#define CONFIG_SYS_I2C_MVTWSI
	37
	38	/* Watchdog support */
	39	#if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_WDT_ORION)
	40	# define CONFIG_WATCHDOG
	41	#endif
	42
	43	/* SPI NOR flash default params, used by sf commands */
	44	#define CONFIG_SF_DEFAULT_SPEED 1000000
	45	#define CONFIG_SF_DEFAULT_MODE SPI_MODE_3
	46	#define CONFIG_SPI_FLASH
	47	#define CONFIG_SPI_FLASH_SPANSION
	48
	49	/*
	50	* SDIO/MMC Card Configuration
	51	*/
	52	#define CONFIG_SYS_MMC_BASE MVEBU_SDIO_BASE
	53
	54	/*
	55	* SATA/SCSI/AHCI configuration
	56	*/
	57	#define CONFIG_LIBATA
	58	#define CONFIG_SCSI_AHCI
	59	#define CONFIG_SCSI_AHCI_PLAT
	60	#define CONFIG_SYS_SCSI_MAX_SCSI_ID 2
	61	#define CONFIG_SYS_SCSI_MAX_LUN 1
	62	#define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \
	63	CONFIG_SYS_SCSI_MAX_LUN)
	64
65	/* Additional FS support/configuration */
66	#define CONFIG_SUPPORT_VFAT
67
68	/* USB/EHCI configuration */
69	#define CONFIG_EHCI_IS_TDI
70
71	/* Environment in SPI NOR flash */
b6ee860b MB	72	#define CONFIG_ENV_OFFSET (3(1 << 18)) / 768KiB in */
	73	#define CONFIG_ENV_SIZE (64 << 10) /* 64KiB */
	74	#define CONFIG_ENV_SECT_SIZE (256 << 10) /* 256KiB sectors */
	75
	76	#define CONFIG_PHY_MARVELL /* there is a marvell phy */
	77	#define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */
	78
	79	/* PCIe support */
	80	#ifndef CONFIG_SPL_BUILD
	81	#define CONFIG_PCI_MVEBU
	82	#define CONFIG_PCI_SCAN_SHOW
	83	#endif
	84
	85	#define CONFIG_SYS_ALT_MEMTEST
	86
	87	/* Keep device tree and initrd in lower memory so the kernel can access them */
	88	#define RELOCATION_LIMITS_ENV_SETTINGS \
	89	"fdt_high=0x10000000\0" \
	90	"initrd_high=0x10000000\0"
	91
	92	/* Defines for SPL */
	93	#define CONFIG_SPL_FRAMEWORK
	94	#define CONFIG_SPL_SIZE (140 << 10)
	95	#define CONFIG_SPL_TEXT_BASE 0x40000030
	96	#define CONFIG_SPL_MAX_SIZE (CONFIG_SPL_SIZE - 0x0030)
	97
	98	#define CONFIG_SPL_BSS_START_ADDR (0x40000000 + CONFIG_SPL_SIZE)
	99	#define CONFIG_SPL_BSS_MAX_SIZE (16 << 10)
	100
	101	#ifdef CONFIG_SPL_BUILD
	102	#define CONFIG_SYS_MALLOC_SIMPLE
	103	#endif
	104
	105	#define CONFIG_SPL_STACK (0x40000000 + ((192 - 16) << 10))
	106	#define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4)
	107	#define CONFIG_SPL_DRIVERS_MISC_SUPPORT
	108
	109	#ifdef CONFIG_TURRIS_OMNIA_SPL_BOOT_DEVICE_SPI
	110	/* SPL related SPI defines */
	111	# define CONFIG_SPL_SPI_LOAD
	112	# define CONFIG_SYS_SPI_U_BOOT_OFFS 0x24000
	113	# define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_SPI_U_BOOT_OFFS
	114	#endif
	115
	116	#ifdef CONFIG_TURRIS_OMNIA_SPL_BOOT_DEVICE_MMC
	117	/* SPL related MMC defines */
	118	# define CONFIG_SYS_MMC_U_BOOT_OFFS (160 << 10)
	119	# define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_MMC_U_BOOT_OFFS
	120	# ifdef CONFIG_SPL_BUILD
	121	# define CONFIG_FIXED_SDHCI_ALIGNED_BUFFER 0x00180000 /* in SDRAM */
	122	# endif
	123	#endif
	124
	125	/*
	126	* mv-common.h should be defined after CMD configs since it used them
	127	* to enable certain macros
	128	*/
	129	#include "mv-common.h"
	130
	131	/* Include the common distro boot environment */
	132	#ifndef CONFIG_SPL_BUILD
	133	#include <config_distro_defaults.h>
	134
	135	#ifdef CONFIG_MMC
136	#define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0)
137	#else
138	#define BOOT_TARGET_DEVICES_MMC(func)
139	#endif
140
141	#ifdef CONFIG_USB_STORAGE
142	#define BOOT_TARGET_DEVICES_USB(func) func(USB, usb, 0)
143	#else
144	#define BOOT_TARGET_DEVICES_USB(func)
145	#endif
146
147	#define BOOT_TARGET_DEVICES(func) \
148	BOOT_TARGET_DEVICES_MMC(func) \
149	BOOT_TARGET_DEVICES_USB(func) \
150	func(PXE, pxe, na) \
151	func(DHCP, dhcp, na)
152
153	#define KERNEL_ADDR_R __stringify(0x1000000)
154	#define FDT_ADDR_R __stringify(0x2000000)
155	#define RAMDISK_ADDR_R __stringify(0x2200000)
156	#define SCRIPT_ADDR_R __stringify(0x1800000)
157	#define PXEFILE_ADDR_R __stringify(0x1900000)
158
159	#define LOAD_ADDRESS_ENV_SETTINGS \
160	"kernel_addr_r=" KERNEL_ADDR_R "\0" \
161	"fdt_addr_r=" FDT_ADDR_R "\0" \
162	"ramdisk_addr_r=" RAMDISK_ADDR_R "\0" \
163	"scriptaddr=" SCRIPT_ADDR_R "\0" \
164	"pxefile_addr_r=" PXEFILE_ADDR_R "\0"
165
166	#include <config_distro_bootcmd.h>
167
168	#define CONFIG_EXTRA_ENV_SETTINGS \
169	RELOCATION_LIMITS_ENV_SETTINGS \
170	LOAD_ADDRESS_ENV_SETTINGS \
171	"fdtfile=" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \
172	"console=ttyS0,115200\0" \
173	BOOTENV
174
175	#endif /* CONFIG_SPL_BUILD */
176
177	#endif /* _CONFIG_TURRIS_OMNIA_H */