[people/ms/u-boot.git] / include / configs / usbarmory.h

/*
 * USB armory MkI board configuration settings
 * http://inversepath.com/usbarmory
 *
 * Copyright (C) 2015, Inverse Path
 * Andrej Rosano <andrej@inversepath.com>
 *
 * SPDX-License-Identifier:|____GPL-2.0+
 */

#ifndef __CONFIG_H
#define __CONFIG_H

#define CONFIG_SYS_FSL_CLK
#define CONFIG_MXC_GPIO

#include <asm/arch/imx-regs.h>

#include <config_distro_defaults.h>

/* U-Boot environment */
#define CONFIG_ENV_OFFSET	(6 * 64 * 1024)
#define CONFIG_ENV_SIZE		(8 * 1024)
#define CONFIG_SYS_MMC_ENV_DEV	0

/* U-Boot general configurations */
#define CONFIG_SYS_CBSIZE	512
#define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
#define CONFIG_SYS_MAXARGS	16
#define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE

/* UART */
#define CONFIG_MXC_UART
#define CONFIG_MXC_UART_BASE	UART1_BASE
#define CONFIG_CONS_INDEX	1

/* SD/MMC */
#define CONFIG_FSL_ESDHC
#define CONFIG_SYS_FSL_ESDHC_ADDR	0
#define CONFIG_SYS_FSL_ESDHC_NUM	1

/* USB */
#define CONFIG_USB_EHCI_MX5
#define CONFIG_MXC_USB_PORT	1
#define CONFIG_MXC_USB_PORTSC	(PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS	0

/* I2C */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
#define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */

/* Fuse */
#define CONFIG_FSL_IIM

/* U-Boot memory offsets */
#define CONFIG_LOADADDR		0x72000000
#define CONFIG_SYS_TEXT_BASE	0x77800000
#define CONFIG_SYS_LOAD_ADDR	CONFIG_LOADADDR

/* Linux boot */
#define CONFIG_HOSTNAME		usbarmory
#define CONFIG_BOOTCOMMAND						\
	"run distro_bootcmd; "						\
	"setenv bootargs console=${console} ${bootargs_default}; "	\
	"ext2load mmc 0:1 ${kernel_addr_r} /boot/zImage; "		\
	"ext2load mmc 0:1 ${fdt_addr_r} /boot/${fdtfile}; "		\
	"bootz ${kernel_addr_r} - ${fdt_addr_r}"

#define BOOT_TARGET_DEVICES(func) func(MMC, mmc, 0)

#include <config_distro_bootcmd.h>

#define MEM_LAYOUT_ENV_SETTINGS			\
	"kernel_addr_r=0x70800000\0"		\
	"fdt_addr_r=0x71000000\0"		\
	"scriptaddr=0x70800000\0"		\
	"pxefile_addr_r=0x70800000\0"		\
	"ramdisk_addr_r=0x73000000\0"

#define CONFIG_EXTRA_ENV_SETTINGS				\
	MEM_LAYOUT_ENV_SETTINGS					\
	"bootargs_default=root=/dev/mmcblk0p1 rootwait rw\0"	\
	"fdtfile=imx53-usbarmory.dtb\0"				\
	"console=ttymxc0,115200\0"				\
	BOOTENV

#ifndef CONFIG_CMDLINE
#define CONFIG_BOOTARGS "console=ttymxc0,115200 root=/dev/mmcblk0p1 rootwait rw"
#define USBARMORY_FIT_PATH	"/boot/usbarmory.itb"
#define USBARMORY_FIT_ADDR	"0x70800000"
#endif

/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS		1
#define PHYS_SDRAM			CSD0_BASE_ADDR
#define PHYS_SDRAM_SIZE			(gd->ram_size)

#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE

#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

#define CONFIG_SYS_MEMTEST_START	0x70000000
#define CONFIG_SYS_MEMTEST_END		0x90000000

#define CONFIG_SYS_MALLOC_LEN		(10 * 1024 * 1024)

#endif				/* __CONFIG_H */
Commit	Line	Data
3bf801a2 AR	1	/*
	2	* USB armory MkI board configuration settings
	3	* http://inversepath.com/usbarmory
	4	*
	5	* Copyright (C) 2015, Inverse Path
	6	* Andrej Rosano <andrej@inversepath.com>
	7	*
	8	* SPDX-License-Identifier:\|____GPL-2.0+
	9	*/
	10
	11	#ifndef __CONFIG_H
	12	#define __CONFIG_H
	13
18fb0e3c	14	#define CONFIG_SYS_FSL_CLK
3bf801a2 AR	15	#define CONFIG_MXC_GPIO
	16
	17	#include <asm/arch/imx-regs.h>
3bf801a2 AR	18
	19	#include <config_distro_defaults.h>
	20
3bf801a2	21	/* U-Boot environment */
3bf801a2 AR	22	#define CONFIG_ENV_OFFSET (6 * 64 * 1024)
3bf801a2 AR	23	#define CONFIG_ENV_SIZE (8 * 1024)
3bf801a2 AR	24	#define CONFIG_SYS_MMC_ENV_DEV 0
	25
	26	/* U-Boot general configurations */
	27	#define CONFIG_SYS_CBSIZE 512
	28	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
	29	#define CONFIG_SYS_MAXARGS 16
	30	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
	31
	32	/* UART */
	33	#define CONFIG_MXC_UART
	34	#define CONFIG_MXC_UART_BASE UART1_BASE
	35	#define CONFIG_CONS_INDEX 1
3bf801a2 AR	36
3bf801a2 AR	37	/* SD/MMC */
3bf801a2 AR	38	#define CONFIG_FSL_ESDHC
	39	#define CONFIG_SYS_FSL_ESDHC_ADDR 0
	40	#define CONFIG_SYS_FSL_ESDHC_NUM 1
3bf801a2 AR	41
3bf801a2 AR	42	/* USB */
3bf801a2	43	#define CONFIG_USB_EHCI_MX5
3bf801a2 AR	44	#define CONFIG_MXC_USB_PORT 1
	45	#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI \| PORT_PTS_PTW)
	46	#define CONFIG_MXC_USB_FLAGS 0
	47
	48	/* I2C */
3bf801a2 AR	49	#define CONFIG_SYS_I2C
3bf801a2 AR	50	#define CONFIG_SYS_I2C_MXC
03544c66 AA	51	#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
03544c66 AA	52	#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
3bf801a2 AR	53
3bf801a2 AR	54	/* Fuse */
3bf801a2 AR	55	#define CONFIG_FSL_IIM
3bf801a2 AR	56
9a45ec3e	57	/* U-Boot memory offsets */
3bf801a2 AR	58	#define CONFIG_LOADADDR 0x72000000
	59	#define CONFIG_SYS_TEXT_BASE 0x77800000
	60	#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
9a45ec3e AR	61
9a45ec3e AR	62	/* Linux boot */
3bf801a2 AR	63	#define CONFIG_HOSTNAME usbarmory
	64	#define CONFIG_BOOTCOMMAND \
	65	"run distro_bootcmd; " \
	66	"setenv bootargs console=${console} ${bootargs_default}; " \
9a45ec3e	67	"ext2load mmc 0:1 ${kernel_addr_r} /boot/zImage; " \
3bf801a2	68	"ext2load mmc 0:1 ${fdt_addr_r} /boot/${fdtfile}; " \
9a45ec3e	69	"bootz ${kernel_addr_r} - ${fdt_addr_r}"
3bf801a2 AR	70
	71	#define BOOT_TARGET_DEVICES(func) func(MMC, mmc, 0)
	72
	73	#include <config_distro_bootcmd.h>
	74
	75	#define MEM_LAYOUT_ENV_SETTINGS \
	76	"kernel_addr_r=0x70800000\0" \
	77	"fdt_addr_r=0x71000000\0" \
	78	"scriptaddr=0x70800000\0" \
	79	"pxefile_addr_r=0x70800000\0" \
	80	"ramdisk_addr_r=0x73000000\0"
	81
	82	#define CONFIG_EXTRA_ENV_SETTINGS \
	83	MEM_LAYOUT_ENV_SETTINGS \
	84	"bootargs_default=root=/dev/mmcblk0p1 rootwait rw\0" \
	85	"fdtfile=imx53-usbarmory.dtb\0" \
	86	"console=ttymxc0,115200\0" \
	87	BOOTENV
	88
a02ab5ea AR	89	#ifndef CONFIG_CMDLINE
	90	#define CONFIG_BOOTARGS "console=ttymxc0,115200 root=/dev/mmcblk0p1 rootwait rw"
	91	#define USBARMORY_FIT_PATH "/boot/usbarmory.itb"
	92	#define USBARMORY_FIT_ADDR "0x70800000"
	93	#endif
	94
3bf801a2 AR	95	/* Physical Memory Map */
	96	#define CONFIG_NR_DRAM_BANKS 1
	97	#define PHYS_SDRAM CSD0_BASE_ADDR
	98	#define PHYS_SDRAM_SIZE (gd->ram_size)
	99
	100	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
	101	#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
	102	#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
	103
	104	#define CONFIG_SYS_INIT_SP_OFFSET \
	105	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
	106	#define CONFIG_SYS_INIT_SP_ADDR \
	107	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
	108
	109	#define CONFIG_SYS_MEMTEST_START 0x70000000
	110	#define CONFIG_SYS_MEMTEST_END 0x90000000
	111
	112	#define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024)
	113
	114	#endif /* __CONFIG_H */