]>
Commit | Line | Data |
---|---|---|
4e43b2e8 HS |
1 | /* |
2 | * Copyright (C) Freescale Semiconductor, Inc. 2006. | |
3 | * | |
4 | * (C) Copyright 2010 | |
5 | * Heiko Schocher, DENX Software Engineering, hs@denx.de. | |
6 | * | |
7 | * See file CREDITS for list of people who contributed to this | |
8 | * project. | |
9 | * | |
10 | * This program is free software; you can redistribute it and/or | |
11 | * modify it under the terms of the GNU General Public License as | |
12 | * published by the Free Software Foundation; either version 2 of | |
13 | * the License, or (at your option) any later version. | |
14 | * | |
15 | * This program is distributed in the hope that it will be useful, | |
16 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
17 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
18 | * GNU General Public License for more details. | |
19 | * | |
20 | * You should have received a copy of the GNU General Public License | |
21 | * along with this program; if not, write to the Free Software | |
22 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, | |
23 | * MA 02111-1307 USA | |
24 | */ | |
25 | /* | |
26 | * ve8313 board configuration file | |
27 | */ | |
28 | ||
29 | #ifndef __CONFIG_H | |
30 | #define __CONFIG_H | |
31 | ||
32 | /* | |
33 | * High Level Configuration Options | |
34 | */ | |
35 | #define CONFIG_E300 1 | |
36 | #define CONFIG_MPC83xx 1 | |
37 | #define CONFIG_MPC831x 1 | |
38 | #define CONFIG_MPC8313 1 | |
39 | #define CONFIG_VE8313 1 | |
40 | ||
2ae18241 WD |
41 | #ifndef CONFIG_SYS_TEXT_BASE |
42 | #define CONFIG_SYS_TEXT_BASE 0xfe000000 | |
43 | #endif | |
44 | ||
4e43b2e8 | 45 | #define CONFIG_PCI 1 |
a2243b84 | 46 | #define CONFIG_FSL_ELBC 1 |
4e43b2e8 HS |
47 | |
48 | #define CONFIG_BOARD_EARLY_INIT_F 1 | |
49 | ||
50 | /* | |
51 | * On-board devices | |
52 | * | |
53 | */ | |
54 | #define CONFIG_83XX_CLKIN 32000000 /* in Hz */ | |
55 | ||
56 | #define CONFIG_SYS_CLK_FREQ CONFIG_83XX_CLKIN | |
57 | ||
58 | #define CONFIG_SYS_IMMR 0xE0000000 | |
59 | ||
60 | #define CONFIG_SYS_MEMTEST_START 0x00001000 | |
61 | #define CONFIG_SYS_MEMTEST_END 0x07000000 | |
62 | ||
63 | #define CONFIG_SYS_ACR_PIPE_DEP 3 /* Arbiter pipeline depth */ | |
64 | #define CONFIG_SYS_ACR_RPTCNT 3 /* Arbiter repeat count */ | |
65 | ||
66 | /* | |
67 | * Device configurations | |
68 | */ | |
69 | ||
70 | /* | |
71 | * DDR Setup | |
72 | */ | |
be29fa71 | 73 | #define CONFIG_SYS_DDR_BASE 0x00000000 /* DDR is system memory*/ |
4e43b2e8 HS |
74 | #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_BASE |
75 | #define CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_BASE | |
76 | ||
77 | /* | |
78 | * Manually set up DDR parameters, as this board does not | |
79 | * have the SPD connected to I2C. | |
80 | */ | |
be29fa71 | 81 | #define CONFIG_SYS_DDR_SIZE 128 /* MB */ |
2e651b24 | 82 | #define CONFIG_SYS_DDR_CS0_CONFIG (CSCONFIG_EN \ |
4e43b2e8 | 83 | | CSCONFIG_AP \ |
2fef4020 JH |
84 | | CSCONFIG_ODT_RD_NEVER \ |
85 | | CSCONFIG_ODT_WR_ALL \ | |
be29fa71 JH |
86 | | CSCONFIG_ROW_BIT_13 \ |
87 | | CSCONFIG_COL_BIT_10) | |
4e43b2e8 HS |
88 | /* 0x80840102 */ |
89 | ||
90 | #define CONFIG_SYS_DDR_TIMING_3 0x00000000 | |
be29fa71 JH |
91 | #define CONFIG_SYS_DDR_TIMING_0 ((0 << TIMING_CFG0_RWT_SHIFT) \ |
92 | | (0 << TIMING_CFG0_WRT_SHIFT) \ | |
93 | | (3 << TIMING_CFG0_RRT_SHIFT) \ | |
94 | | (2 << TIMING_CFG0_WWT_SHIFT) \ | |
95 | | (7 << TIMING_CFG0_ACT_PD_EXIT_SHIFT) \ | |
96 | | (2 << TIMING_CFG0_PRE_PD_EXIT_SHIFT) \ | |
97 | | (8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT) \ | |
98 | | (2 << TIMING_CFG0_MRS_CYC_SHIFT)) | |
4e43b2e8 | 99 | /* 0x0e720802 */ |
be29fa71 JH |
100 | #define CONFIG_SYS_DDR_TIMING_1 ((2 << TIMING_CFG1_PRETOACT_SHIFT) \ |
101 | | (6 << TIMING_CFG1_ACTTOPRE_SHIFT) \ | |
102 | | (2 << TIMING_CFG1_ACTTORW_SHIFT) \ | |
103 | | (5 << TIMING_CFG1_CASLAT_SHIFT) \ | |
104 | | (6 << TIMING_CFG1_REFREC_SHIFT) \ | |
105 | | (2 << TIMING_CFG1_WRREC_SHIFT) \ | |
106 | | (2 << TIMING_CFG1_ACTTOACT_SHIFT) \ | |
107 | | (2 << TIMING_CFG1_WRTORD_SHIFT)) | |
4e43b2e8 | 108 | /* 0x26256222 */ |
be29fa71 JH |
109 | #define CONFIG_SYS_DDR_TIMING_2 ((0 << TIMING_CFG2_ADD_LAT_SHIFT) \ |
110 | | (5 << TIMING_CFG2_CPO_SHIFT) \ | |
111 | | (2 << TIMING_CFG2_WR_LAT_DELAY_SHIFT) \ | |
112 | | (1 << TIMING_CFG2_RD_TO_PRE_SHIFT) \ | |
113 | | (2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT) \ | |
114 | | (3 << TIMING_CFG2_CKE_PLS_SHIFT) \ | |
115 | | (7 << TIMING_CFG2_FOUR_ACT_SHIFT)) | |
4e43b2e8 | 116 | /* 0x029028c7 */ |
be29fa71 JH |
117 | #define CONFIG_SYS_DDR_INTERVAL ((0x320 << SDRAM_INTERVAL_REFINT_SHIFT) \ |
118 | | (0x2000 << SDRAM_INTERVAL_BSTOPRE_SHIFT)) | |
4e43b2e8 | 119 | /* 0x03202000 */ |
be29fa71 | 120 | #define CONFIG_SYS_SDRAM_CFG (SDRAM_CFG_SREN \ |
4e43b2e8 | 121 | | SDRAM_CFG_SDRAM_TYPE_DDR2 \ |
2fef4020 | 122 | | SDRAM_CFG_DBW_32) |
4e43b2e8 | 123 | /* 0x43080000 */ |
be29fa71 JH |
124 | #define CONFIG_SYS_SDRAM_CFG2 0x00401000 |
125 | #define CONFIG_SYS_DDR_MODE ((0x4440 << SDRAM_MODE_ESD_SHIFT) \ | |
126 | | (0x0232 << SDRAM_MODE_SD_SHIFT)) | |
4e43b2e8 | 127 | /* 0x44400232 */ |
be29fa71 | 128 | #define CONFIG_SYS_DDR_MODE_2 0x8000C000 |
4e43b2e8 HS |
129 | |
130 | #define CONFIG_SYS_DDR_CLK_CNTL DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05 | |
131 | /*0x02000000*/ | |
be29fa71 | 132 | #define CONFIG_SYS_DDRCDR_VALUE (DDRCDR_EN \ |
4e43b2e8 HS |
133 | | DDRCDR_PZ_NOMZ \ |
134 | | DDRCDR_NZ_NOMZ \ | |
be29fa71 | 135 | | DDRCDR_M_ODR) |
4e43b2e8 HS |
136 | /* 0x73000002 */ |
137 | ||
138 | /* | |
139 | * FLASH on the Local Bus | |
140 | */ | |
141 | #define CONFIG_SYS_FLASH_CFI /* use the Common Flash Interface */ | |
142 | #define CONFIG_FLASH_CFI_DRIVER /* use the CFI driver */ | |
143 | #define CONFIG_SYS_FLASH_BASE 0xFE000000 | |
144 | #define CONFIG_SYS_FLASH_SIZE 32 /* size in MB */ | |
145 | #define CONFIG_SYS_FLASH_EMPTY_INFO /* display empty sectors */ | |
146 | #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* buffer up multiple bytes */ | |
147 | ||
be29fa71 | 148 | #define CONFIG_SYS_NOR_BR_PRELIM (CONFIG_SYS_FLASH_BASE \ |
7d6a0982 JH |
149 | | BR_PS_16 /* 16 bit */ \ |
150 | | BR_MS_GPCM /* MSEL = GPCM */ \ | |
151 | | BR_V) /* valid */ | |
4e43b2e8 | 152 | #define CONFIG_SYS_NOR_OR_PRELIM (MEG_TO_AM(CONFIG_SYS_FLASH_SIZE) \ |
be29fa71 JH |
153 | | OR_GPCM_CSNT \ |
154 | | OR_GPCM_ACS_DIV4 \ | |
155 | | OR_GPCM_SCY_5 \ | |
7d6a0982 | 156 | | OR_GPCM_TRLX_SET \ |
be29fa71 JH |
157 | | OR_GPCM_EAD) |
158 | /* 0xfe000c55 */ | |
4e43b2e8 HS |
159 | |
160 | #define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE | |
7d6a0982 | 161 | #define CONFIG_SYS_LBLAWAR0_PRELIM (LBLAWAR_EN | LBLAWAR_32MB) |
4e43b2e8 HS |
162 | |
163 | #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ | |
164 | #define CONFIG_SYS_MAX_FLASH_SECT 256 /* sectors per dev */ | |
165 | ||
166 | #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ | |
167 | #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ | |
168 | ||
14d0a02a | 169 | #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ |
4e43b2e8 HS |
170 | |
171 | #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) | |
172 | #define CONFIG_SYS_RAMBOOT | |
173 | #endif | |
174 | ||
175 | #define CONFIG_SYS_INIT_RAM_LOCK 1 | |
176 | #define CONFIG_SYS_INIT_RAM_ADDR 0xFD000000 /* Initial RAM address */ | |
be29fa71 | 177 | #define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in RAM*/ |
4e43b2e8 | 178 | |
be29fa71 JH |
179 | #define CONFIG_SYS_GBL_DATA_OFFSET \ |
180 | (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) | |
4e43b2e8 HS |
181 | #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET |
182 | ||
183 | /* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */ | |
184 | #define CONFIG_SYS_MONITOR_LEN (384 * 1024) | |
185 | #define CONFIG_SYS_MALLOC_LEN (512 * 1024) | |
186 | ||
187 | /* | |
188 | * Local Bus LCRR and LBCR regs | |
189 | */ | |
190 | #define CONFIG_SYS_LCRR_EADC LCRR_EADC_3 | |
191 | #define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_2 | |
192 | ||
193 | #define CONFIG_SYS_LBC_LBCR 0x00040000 | |
194 | ||
195 | #define CONFIG_SYS_LBC_MRTPR 0x20000000 | |
196 | ||
197 | /* | |
198 | * NAND settings | |
199 | */ | |
200 | #define CONFIG_SYS_NAND_BASE 0x61000000 | |
201 | #define CONFIG_SYS_MAX_NAND_DEVICE 1 | |
202 | #define CONFIG_MTD_NAND_VERIFY_WRITE | |
203 | #define CONFIG_CMD_NAND 1 | |
204 | #define CONFIG_NAND_FSL_ELBC 1 | |
205 | #define CONFIG_SYS_NAND_BLOCK_SIZE 16384 | |
206 | ||
be29fa71 JH |
207 | #define CONFIG_SYS_NAND_BR_PRELIM (CONFIG_SYS_NAND_BASE \ |
208 | | BR_PS_8 \ | |
209 | | BR_DECC_CHK_GEN \ | |
210 | | BR_MS_FCM \ | |
211 | | BR_V) /* valid */ | |
212 | /* 0x61000c21 */ | |
7d6a0982 | 213 | #define CONFIG_SYS_NAND_OR_PRELIM (OR_AM_32KB \ |
be29fa71 JH |
214 | | OR_FCM_BCTLD \ |
215 | | OR_FCM_CHT \ | |
216 | | OR_FCM_SCY_2 \ | |
217 | | OR_FCM_RST \ | |
218 | | OR_FCM_TRLX) | |
219 | /* 0xffff90ac */ | |
4e43b2e8 HS |
220 | |
221 | #define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NOR_BR_PRELIM | |
222 | #define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NOR_OR_PRELIM | |
223 | #define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_NAND_BR_PRELIM | |
224 | #define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_NAND_OR_PRELIM | |
225 | ||
226 | #define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_NAND_BASE | |
7d6a0982 | 227 | #define CONFIG_SYS_LBLAWAR1_PRELIM (LBLAWAR_EN | LBLAWAR_32KB) |
4e43b2e8 HS |
228 | |
229 | #define CONFIG_SYS_NAND_LBLAWBAR_PRELIM CONFIG_SYS_LBLAWBAR1_PRELIM | |
230 | #define CONFIG_SYS_NAND_LBLAWAR_PRELIM CONFIG_SYS_LBLAWAR1_PRELIM | |
231 | ||
232 | /* CS2 NvRAM */ | |
be29fa71 JH |
233 | #define CONFIG_SYS_BR2_PRELIM (0x60000000 \ |
234 | | BR_PS_8 \ | |
4e43b2e8 HS |
235 | | BR_V) |
236 | /* 0x60000801 */ | |
7d6a0982 | 237 | #define CONFIG_SYS_OR2_PRELIM (OR_AM_128KB \ |
be29fa71 JH |
238 | | OR_GPCM_CSNT \ |
239 | | OR_GPCM_XACS \ | |
4e43b2e8 | 240 | | OR_GPCM_SCY_3 \ |
7d6a0982 JH |
241 | | OR_GPCM_TRLX_SET \ |
242 | | OR_GPCM_EHTR_SET \ | |
4e43b2e8 HS |
243 | | OR_GPCM_EAD) |
244 | /* 0xfffe0937 */ | |
245 | /* local bus read write buffer mapping SRAM@0x64000000 */ | |
be29fa71 JH |
246 | #define CONFIG_SYS_BR3_PRELIM (0x62000000 \ |
247 | | BR_PS_16 \ | |
4e43b2e8 HS |
248 | | BR_V) |
249 | /* 0x62001001 */ | |
250 | ||
7d6a0982 | 251 | #define CONFIG_SYS_OR3_PRELIM (OR_AM_32MB \ |
be29fa71 JH |
252 | | OR_GPCM_CSNT \ |
253 | | OR_GPCM_XACS \ | |
4e43b2e8 | 254 | | OR_GPCM_SCY_15 \ |
7d6a0982 JH |
255 | | OR_GPCM_TRLX_SET \ |
256 | | OR_GPCM_EHTR_SET \ | |
4e43b2e8 HS |
257 | | OR_GPCM_EAD) |
258 | /* 0xfe0009f7 */ | |
259 | ||
260 | /* pass open firmware flat tree */ | |
261 | #define CONFIG_OF_LIBFDT 1 | |
262 | #define CONFIG_OF_BOARD_SETUP 1 | |
263 | #define CONFIG_OF_STDOUT_VIA_ALIAS 1 | |
264 | ||
265 | /* | |
266 | * Serial Port | |
267 | */ | |
268 | #define CONFIG_CONS_INDEX 1 | |
269 | #define CONFIG_SYS_NS16550 | |
270 | #define CONFIG_SYS_NS16550_SERIAL | |
271 | #define CONFIG_SYS_NS16550_REG_SIZE 1 | |
272 | #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) | |
273 | ||
274 | #define CONFIG_SYS_BAUDRATE_TABLE \ | |
275 | {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200} | |
276 | ||
277 | #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR+0x4500) | |
278 | #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR+0x4600) | |
279 | ||
280 | /* Use the HUSH parser */ | |
281 | #define CONFIG_SYS_HUSH_PARSER | |
4e43b2e8 HS |
282 | |
283 | #if defined(CONFIG_PCI) | |
284 | /* | |
285 | * General PCI | |
286 | * Addresses are mapped 1-1. | |
287 | */ | |
288 | #define CONFIG_SYS_PCI1_MEM_BASE 0x80000000 | |
289 | #define CONFIG_SYS_PCI1_MEM_PHYS CONFIG_SYS_PCI1_MEM_BASE | |
290 | #define CONFIG_SYS_PCI1_MEM_SIZE 0x10000000 /* 256M */ | |
291 | #define CONFIG_SYS_PCI1_MMIO_BASE 0x90000000 | |
292 | #define CONFIG_SYS_PCI1_MMIO_PHYS CONFIG_SYS_PCI1_MMIO_BASE | |
293 | #define CONFIG_SYS_PCI1_MMIO_SIZE 0x10000000 /* 256M */ | |
be29fa71 JH |
294 | #define CONFIG_SYS_PCI1_IO_BASE 0x00000000 |
295 | #define CONFIG_SYS_PCI1_IO_PHYS 0xE2000000 | |
296 | #define CONFIG_SYS_PCI1_IO_SIZE 0x00100000 /* 1M */ | |
4e43b2e8 HS |
297 | |
298 | #define CONFIG_PCI_PNP /* do pci plug-and-play */ | |
299 | #define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1957 /* Freescale */ | |
300 | #endif | |
301 | ||
302 | /* | |
303 | * TSEC | |
304 | */ | |
305 | #define CONFIG_TSEC_ENET /* TSEC ethernet support */ | |
306 | ||
4e43b2e8 HS |
307 | |
308 | #define CONFIG_TSEC1 | |
309 | #ifdef CONFIG_TSEC1 | |
310 | #define CONFIG_HAS_ETH0 | |
311 | #define CONFIG_TSEC1_NAME "TSEC1" | |
312 | #define CONFIG_SYS_TSEC1_OFFSET 0x24000 | |
313 | #define TSEC1_PHY_ADDR 0x01 | |
314 | #define TSEC1_FLAGS 0 | |
315 | #define TSEC1_PHYIDX 0 | |
316 | #endif | |
317 | ||
318 | /* Options are: TSEC[0-1] */ | |
319 | #define CONFIG_ETHPRIME "TSEC1" | |
320 | ||
321 | /* | |
322 | * Environment | |
323 | */ | |
324 | #define CONFIG_ENV_IS_IN_FLASH 1 | |
be29fa71 JH |
325 | #define CONFIG_ENV_ADDR \ |
326 | (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN) | |
4e43b2e8 HS |
327 | #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K(one sector) for env */ |
328 | #define CONFIG_ENV_SIZE 0x4000 | |
329 | /* Address and size of Redundant Environment Sector */ | |
be29fa71 JH |
330 | #define CONFIG_ENV_OFFSET_REDUND \ |
331 | (CONFIG_ENV_OFFSET + CONFIG_ENV_SECT_SIZE) | |
4e43b2e8 HS |
332 | #define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) |
333 | ||
334 | #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ | |
335 | #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ | |
336 | ||
337 | /* | |
338 | * BOOTP options | |
339 | */ | |
340 | #define CONFIG_BOOTP_BOOTFILESIZE | |
341 | #define CONFIG_BOOTP_BOOTPATH | |
342 | #define CONFIG_BOOTP_GATEWAY | |
343 | #define CONFIG_BOOTP_HOSTNAME | |
344 | ||
345 | /* | |
346 | * Command line configuration. | |
347 | */ | |
348 | #include <config_cmd_default.h> | |
349 | ||
350 | #define CONFIG_CMD_DHCP | |
351 | #define CONFIG_CMD_MII | |
352 | #define CONFIG_CMD_PING | |
353 | #define CONFIG_CMD_PCI | |
354 | ||
355 | #define CONFIG_CMDLINE_EDITING 1 | |
356 | #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ | |
357 | ||
358 | /* | |
359 | * Miscellaneous configurable options | |
360 | */ | |
361 | #define CONFIG_SYS_LONGHELP /* undef to save memory */ | |
362 | #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ | |
363 | #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ | |
364 | #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ | |
365 | ||
366 | #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) | |
367 | #define CONFIG_SYS_MAXARGS 16 /* max number of cmd args */ | |
368 | #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot arg Buffer size */ | |
369 | #define CONFIG_SYS_HZ 1000 /* 1ms ticks */ | |
370 | ||
371 | /* | |
372 | * For booting Linux, the board info and command line data | |
9f530d59 | 373 | * have to be in the first 256 MB of memory, since this is |
4e43b2e8 HS |
374 | * the maximum mapped by the Linux kernel during initialization. |
375 | */ | |
be29fa71 JH |
376 | /* Initial Memory map for Linux*/ |
377 | #define CONFIG_SYS_BOOTMAPSZ (256 << 20) | |
4e43b2e8 HS |
378 | |
379 | /* 0x64050000 */ | |
380 | #define CONFIG_SYS_HRCW_LOW (\ | |
381 | 0x20000000 /* reserved, must be set */ |\ | |
382 | HRCWL_DDRCM |\ | |
383 | HRCWL_CSB_TO_CLKIN_4X1 | \ | |
384 | HRCWL_CORE_TO_CSB_2_5X1) | |
385 | ||
386 | /* 0xa0600004 */ | |
387 | #define CONFIG_SYS_HRCW_HIGH (HRCWH_PCI_HOST | \ | |
388 | HRCWH_PCI_ARBITER_ENABLE | \ | |
389 | HRCWH_CORE_ENABLE | \ | |
390 | HRCWH_FROM_0X00000100 | \ | |
391 | HRCWH_BOOTSEQ_DISABLE |\ | |
392 | HRCWH_SW_WATCHDOG_DISABLE |\ | |
393 | HRCWH_ROM_LOC_LOCAL_16BIT | \ | |
394 | HRCWH_TSEC1M_IN_MII | \ | |
395 | HRCWH_BIG_ENDIAN | \ | |
396 | HRCWH_LALE_EARLY) | |
397 | ||
398 | /* System IO Config */ | |
399 | #define CONFIG_SYS_SICRH (0x01000000 | \ | |
400 | SICRH_ETSEC2_B | \ | |
401 | SICRH_ETSEC2_C | \ | |
402 | SICRH_ETSEC2_D | \ | |
403 | SICRH_ETSEC2_E | \ | |
404 | SICRH_ETSEC2_F | \ | |
405 | SICRH_ETSEC2_G | \ | |
406 | SICRH_TSOBI1 | \ | |
407 | SICRH_TSOBI2) | |
408 | /* 0x010fff03 */ | |
409 | #define CONFIG_SYS_SICRL (SICRL_LBC | \ | |
410 | SICRL_SPI_A | \ | |
411 | SICRL_SPI_B | \ | |
412 | SICRL_SPI_C | \ | |
413 | SICRL_SPI_D | \ | |
414 | SICRL_ETSEC2_A) | |
415 | /* 0x33fc0003) */ | |
416 | ||
417 | #define CONFIG_SYS_HID0_INIT 0x000000000 | |
418 | #define CONFIG_SYS_HID0_FINAL (HID0_ENABLE_MACHINE_CHECK | \ | |
419 | HID0_ENABLE_INSTRUCTION_CACHE) | |
420 | ||
421 | #define CONFIG_SYS_HID2 HID2_HBE | |
422 | ||
423 | #define CONFIG_HIGH_BATS 1 /* High BATs supported */ | |
424 | ||
425 | /* DDR @ 0x00000000 */ | |
72cd4087 | 426 | #define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_RW) |
be29fa71 JH |
427 | #define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE \ |
428 | | BATU_BL_256M \ | |
429 | | BATU_VS \ | |
430 | | BATU_VP) | |
4e43b2e8 HS |
431 | |
432 | #if defined(CONFIG_PCI) | |
433 | /* PCI @ 0x80000000 */ | |
72cd4087 | 434 | #define CONFIG_SYS_IBAT1L (CONFIG_SYS_PCI1_MEM_BASE | BATL_PP_RW) |
be29fa71 JH |
435 | #define CONFIG_SYS_IBAT1U (CONFIG_SYS_PCI1_MEM_BASE \ |
436 | | BATU_BL_256M \ | |
437 | | BATU_VS \ | |
438 | | BATU_VP) | |
439 | #define CONFIG_SYS_IBAT2L (CONFIG_SYS_PCI1_MMIO_BASE \ | |
72cd4087 | 440 | | BATL_PP_RW \ |
be29fa71 JH |
441 | | BATL_CACHEINHIBIT \ |
442 | | BATL_GUARDEDSTORAGE) | |
443 | #define CONFIG_SYS_IBAT2U (CONFIG_SYS_PCI1_MMIO_BASE \ | |
444 | | BATU_BL_256M \ | |
445 | | BATU_VS \ | |
446 | | BATU_VP) | |
4e43b2e8 HS |
447 | #else |
448 | #define CONFIG_SYS_IBAT1L (0) | |
449 | #define CONFIG_SYS_IBAT1U (0) | |
450 | #define CONFIG_SYS_IBAT2L (0) | |
451 | #define CONFIG_SYS_IBAT2U (0) | |
452 | #endif | |
453 | ||
454 | /* PCI2 not supported on 8313 */ | |
455 | #define CONFIG_SYS_IBAT3L (0) | |
456 | #define CONFIG_SYS_IBAT3U (0) | |
457 | #define CONFIG_SYS_IBAT4L (0) | |
458 | #define CONFIG_SYS_IBAT4U (0) | |
459 | ||
460 | /* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 & BCSR @ 0xE2400000 */ | |
be29fa71 | 461 | #define CONFIG_SYS_IBAT5L (CONFIG_SYS_IMMR \ |
72cd4087 | 462 | | BATL_PP_RW \ |
be29fa71 JH |
463 | | BATL_CACHEINHIBIT \ |
464 | | BATL_GUARDEDSTORAGE) | |
465 | #define CONFIG_SYS_IBAT5U (CONFIG_SYS_IMMR \ | |
466 | | BATU_BL_256M \ | |
467 | | BATU_VS \ | |
468 | | BATU_VP) | |
4e43b2e8 HS |
469 | |
470 | /* stack in DCACHE 0xFDF00000 & FLASH @ 0xFE000000 */ | |
72cd4087 | 471 | #define CONFIG_SYS_IBAT6L (0xF0000000 | BATL_PP_RW | BATL_GUARDEDSTORAGE) |
4e43b2e8 HS |
472 | #define CONFIG_SYS_IBAT6U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP) |
473 | ||
474 | /* FPGA, SRAM, NAND @ 0x60000000 */ | |
72cd4087 | 475 | #define CONFIG_SYS_IBAT7L (0x60000000 | BATL_PP_RW | BATL_GUARDEDSTORAGE) |
4e43b2e8 HS |
476 | #define CONFIG_SYS_IBAT7U (0x60000000 | BATU_BL_256M | BATU_VS | BATU_VP) |
477 | ||
478 | #define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L | |
479 | #define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U | |
480 | #define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L | |
481 | #define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U | |
482 | #define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L | |
483 | #define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U | |
484 | #define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L | |
485 | #define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U | |
486 | #define CONFIG_SYS_DBAT4L CONFIG_SYS_IBAT4L | |
487 | #define CONFIG_SYS_DBAT4U CONFIG_SYS_IBAT4U | |
488 | #define CONFIG_SYS_DBAT5L CONFIG_SYS_IBAT5L | |
489 | #define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U | |
490 | #define CONFIG_SYS_DBAT6L CONFIG_SYS_IBAT6L | |
491 | #define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U | |
492 | #define CONFIG_SYS_DBAT7L CONFIG_SYS_IBAT7L | |
493 | #define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U | |
494 | ||
4e43b2e8 HS |
495 | #define CONFIG_NETDEV eth0 |
496 | ||
497 | #define CONFIG_HOSTNAME ve8313 | |
498 | #define CONFIG_UBOOTPATH ve8313/u-boot.bin | |
499 | ||
500 | #define CONFIG_BOOTDELAY 6 /* -1 disables auto-boot */ | |
501 | #define CONFIG_BAUDRATE 115200 | |
502 | ||
4e43b2e8 | 503 | #define CONFIG_EXTRA_ENV_SETTINGS \ |
5368c55d MV |
504 | "netdev=" __stringify(CONFIG_NETDEV) "\0" \ |
505 | "ethprime=" __stringify(CONFIG_TSEC1_NAME) "\0" \ | |
506 | "u-boot=" __stringify(CONFIG_UBOOTPATH) "\0" \ | |
4e43b2e8 HS |
507 | "u-boot_addr_r=100000\0" \ |
508 | "load=tftp ${u-boot_addr_r} ${u-boot}\0" \ | |
5368c55d MV |
509 | "update=protect off " __stringify(CONFIG_SYS_FLASH_BASE) \ |
510 | " +${filesize};" \ | |
511 | "erase " __stringify(CONFIG_SYS_FLASH_BASE) " +${filesize};" \ | |
512 | "cp.b ${u-boot_addr_r} " __stringify(CONFIG_SYS_FLASH_BASE) \ | |
be29fa71 | 513 | " ${filesize};" \ |
5368c55d | 514 | "protect on " __stringify(CONFIG_SYS_FLASH_BASE) " +${filesize}\0" \ |
4e43b2e8 HS |
515 | |
516 | #endif /* __CONFIG_H */ |