[thirdparty/u-boot.git] / include / configs / vexpress_common.h

/* SPDX-License-Identifier: GPL-2.0+ */
/*
 * (C) Copyright 2011 ARM Limited
 * (C) Copyright 2010 Linaro
 * Matt Waddel, <matt.waddel@linaro.org>
 *
 * Configuration for Versatile Express. Parts were derived from other ARM
 *   configurations.
 */

#ifndef __VEXPRESS_COMMON_H
#define __VEXPRESS_COMMON_H

/*
 * Definitions copied from linux kernel:
 * arch/arm/mach-vexpress/include/mach/motherboard.h
 */
#ifdef CONFIG_VEXPRESS_ORIGINAL_MEMORY_MAP
/* CS register bases for the original memory map. */
#define V2M_PA_CS0		0x40000000
#define V2M_PA_CS1		0x44000000
#define V2M_PA_CS2		0x48000000
#define V2M_PA_CS3		0x4c000000
#define V2M_PA_CS7		0x10000000

#define V2M_PERIPH_OFFSET(x)	(x << 12)
#define V2M_SYSREGS		(V2M_PA_CS7 + V2M_PERIPH_OFFSET(0))
#define V2M_SYSCTL		(V2M_PA_CS7 + V2M_PERIPH_OFFSET(1))
#define V2M_SERIAL_BUS_PCI	(V2M_PA_CS7 + V2M_PERIPH_OFFSET(2))

#define V2M_BASE		0x60000000
#elif defined(CONFIG_VEXPRESS_EXTENDED_MEMORY_MAP)
/* CS register bases for the extended memory map. */
#define V2M_PA_CS0		0x08000000
#define V2M_PA_CS1		0x0c000000
#define V2M_PA_CS2		0x14000000
#define V2M_PA_CS3		0x18000000
#define V2M_PA_CS7		0x1c000000

#define V2M_PERIPH_OFFSET(x)	(x << 16)
#define V2M_SYSREGS		(V2M_PA_CS7 + V2M_PERIPH_OFFSET(1))
#define V2M_SYSCTL		(V2M_PA_CS7 + V2M_PERIPH_OFFSET(2))
#define V2M_SERIAL_BUS_PCI	(V2M_PA_CS7 + V2M_PERIPH_OFFSET(3))

#define V2M_BASE		0x80000000
#endif

/*
 * Physical addresses, offset from V2M_PA_CS0-3
 */
#define V2M_NOR0		(V2M_PA_CS0)
#define V2M_NOR1		(V2M_PA_CS1)
#define V2M_SRAM		(V2M_PA_CS2)
#define V2M_VIDEO_SRAM		(V2M_PA_CS3 + 0x00000000)
#define V2M_ISP1761		(V2M_PA_CS3 + 0x03000000)

/* Common peripherals relative to CS7. */
#define V2M_AACI		(V2M_PA_CS7 + V2M_PERIPH_OFFSET(4))
#define V2M_MMCI		(V2M_PA_CS7 + V2M_PERIPH_OFFSET(5))
#define V2M_KMI0		(V2M_PA_CS7 + V2M_PERIPH_OFFSET(6))
#define V2M_KMI1		(V2M_PA_CS7 + V2M_PERIPH_OFFSET(7))

#define V2M_UART0		(V2M_PA_CS7 + V2M_PERIPH_OFFSET(9))
#define V2M_UART1		(V2M_PA_CS7 + V2M_PERIPH_OFFSET(10))
#define V2M_UART2		(V2M_PA_CS7 + V2M_PERIPH_OFFSET(11))
#define V2M_UART3		(V2M_PA_CS7 + V2M_PERIPH_OFFSET(12))

#define V2M_WDT			(V2M_PA_CS7 + V2M_PERIPH_OFFSET(15))

#define V2M_TIMER01		(V2M_PA_CS7 + V2M_PERIPH_OFFSET(17))
#define V2M_TIMER23		(V2M_PA_CS7 + V2M_PERIPH_OFFSET(18))

#define V2M_SERIAL_BUS_DVI	(V2M_PA_CS7 + V2M_PERIPH_OFFSET(22))
#define V2M_RTC			(V2M_PA_CS7 + V2M_PERIPH_OFFSET(23))

#define V2M_CF			(V2M_PA_CS7 + V2M_PERIPH_OFFSET(26))

#define V2M_CLCD		(V2M_PA_CS7 + V2M_PERIPH_OFFSET(31))
#define V2M_SIZE_CS7		V2M_PERIPH_OFFSET(32)

/* System register offsets. */
#define V2M_SYS_CFGDATA		(V2M_SYSREGS + 0x0a0)
#define V2M_SYS_CFGCTRL		(V2M_SYSREGS + 0x0a4)
#define V2M_SYS_CFGSTAT		(V2M_SYSREGS + 0x0a8)

/*
 * Configuration
 */
#define SYS_CFG_START		(1 << 31)
#define SYS_CFG_WRITE		(1 << 30)
#define SYS_CFG_OSC		(1 << 20)
#define SYS_CFG_VOLT		(2 << 20)
#define SYS_CFG_AMP		(3 << 20)
#define SYS_CFG_TEMP		(4 << 20)
#define SYS_CFG_RESET		(5 << 20)
#define SYS_CFG_SCC		(6 << 20)
#define SYS_CFG_MUXFPGA		(7 << 20)
#define SYS_CFG_SHUTDOWN	(8 << 20)
#define SYS_CFG_REBOOT		(9 << 20)
#define SYS_CFG_DVIMODE		(11 << 20)
#define SYS_CFG_POWER		(12 << 20)
#define SYS_CFG_SITE_MB		(0 << 16)
#define SYS_CFG_SITE_DB1	(1 << 16)
#define SYS_CFG_SITE_DB2	(2 << 16)
#define SYS_CFG_STACK(n)	((n) << 12)

#define SYS_CFG_ERR		(1 << 1)
#define SYS_CFG_COMPLETE	(1 << 0)

/* Board info register */
#define SYS_ID				V2M_SYSREGS
#define CONFIG_REVISION_TAG		1

#define CONFIG_SYS_MEMTEST_START	V2M_BASE
#define CONFIG_SYS_MEMTEST_END		0x20000000

#define CONFIG_CMDLINE_TAG		1	/* enable passing of ATAGs */
#define CONFIG_SETUP_MEMORY_TAGS	1
#define CONFIG_SYS_L2CACHE_OFF		1
#define CONFIG_INITRD_TAG		1

/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 128 * 1024)

#define SCTL_BASE			V2M_SYSCTL
#define VEXPRESS_FLASHPROG_FLVPPEN	(1 << 0)

#define CONFIG_SYS_TIMER_RATE		1000000
#define CONFIG_SYS_TIMER_COUNTER	(V2M_TIMER01 + 0x4)
#define CONFIG_SYS_TIMER_COUNTS_DOWN

/* PL011 Serial Configuration */
#define CONFIG_PL011_CLOCK		24000000
#define CONFIG_PL01x_PORTS		{(void *)CONFIG_SYS_SERIAL0, \
					 (void *)CONFIG_SYS_SERIAL1}

#define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
#define CONFIG_SYS_SERIAL0		V2M_UART0
#define CONFIG_SYS_SERIAL1		V2M_UART1

#define CONFIG_ARM_PL180_MMCI
#define CONFIG_ARM_PL180_MMCI_BASE	V2M_MMCI
#define CONFIG_SYS_MMC_MAX_BLK_COUNT	127
#define CONFIG_ARM_PL180_MMCI_CLOCK_FREQ 6250000

/* BOOTP options */
#define CONFIG_BOOTP_BOOTFILESIZE

/* Miscellaneous configurable options */
#define CONFIG_SYS_LOAD_ADDR		(V2M_BASE + 0x8000)
#define LINUX_BOOT_PARAM_ADDR		(V2M_BASE + 0x2000)

/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS		2
#define PHYS_SDRAM_1			(V2M_BASE)	/* SDRAM Bank #1 */
#define PHYS_SDRAM_2			(((unsigned int)V2M_BASE) + \
					((unsigned int)0x20000000))
#define PHYS_SDRAM_1_SIZE		0x20000000	/* 512 MB */
#define PHYS_SDRAM_2_SIZE		0x20000000	/* 512 MB */

/* additions for new relocation code */
#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
#define CONFIG_SYS_INIT_RAM_SIZE		0x1000
#define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_SDRAM_BASE + \
					 CONFIG_SYS_INIT_RAM_SIZE - \
					 GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR		CONFIG_SYS_GBL_DATA_OFFSET

/* Basic environment settings */
#define BOOT_TARGET_DEVICES(func) \
        func(MMC, mmc, 1) \
        func(MMC, mmc, 0) \
        func(PXE, pxe, na) \
        func(DHCP, dhcp, na)
#include <config_distro_bootcmd.h>

#ifdef CONFIG_VEXPRESS_ORIGINAL_MEMORY_MAP
#define CONFIG_PLATFORM_ENV_SETTINGS \
		"loadaddr=0x80008000\0" \
		"ramdisk_addr_r=0x61000000\0" \
		"kernel_addr=0x44100000\0" \
		"ramdisk_addr=0x44800000\0" \
		"maxramdisk=0x1800000\0" \
		"pxefile_addr_r=0x88000000\0" \
		"scriptaddr=0x88000000\0" \
		"kernel_addr_r=0x80008000\0"
#elif defined(CONFIG_VEXPRESS_EXTENDED_MEMORY_MAP)
#define CONFIG_PLATFORM_ENV_SETTINGS \
		"loadaddr=0xa0008000\0" \
		"ramdisk_addr_r=0x81000000\0" \
		"kernel_addr=0x0c100000\0" \
		"ramdisk_addr=0x0c800000\0" \
		"maxramdisk=0x1800000\0" \
		"pxefile_addr_r=0xa8000000\0" \
		"scriptaddr=0xa8000000\0" \
		"kernel_addr_r=0xa0008000\0"
#endif
#define CONFIG_EXTRA_ENV_SETTINGS \
		CONFIG_PLATFORM_ENV_SETTINGS \
                BOOTENV \
		"console=ttyAMA0,38400n8\0" \
		"dram=1024M\0" \
		"root=/dev/sda1 rw\0" \
		"mtd=armflash:1M@0x800000(uboot),7M@0x1000000(kernel)," \
			"24M@0x2000000(initrd)\0" \
		"flashargs=setenv bootargs root=${root} console=${console} " \
			"mem=${dram} mtdparts=${mtd} mmci.fmax=190000 " \
			"devtmpfs.mount=0  vmalloc=256M\0" \
		"bootflash=run flashargs; " \
			"cp ${ramdisk_addr} ${ramdisk_addr_r} ${maxramdisk}; " \
			"bootm ${kernel_addr} ${ramdisk_addr_r}\0"

/* FLASH and environment organization */
#define PHYS_FLASH_SIZE			0x04000000	/* 64MB */
#define CONFIG_SYS_FLASH_CFI		1
#define CONFIG_FLASH_CFI_DRIVER		1
#define CONFIG_SYS_FLASH_SIZE		0x04000000
#define CONFIG_SYS_MAX_FLASH_BANKS	2
#define CONFIG_SYS_FLASH_BASE0		V2M_NOR0
#define CONFIG_SYS_FLASH_BASE1		V2M_NOR1
#define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_FLASH_BASE0

/* Timeout values in ticks */
#define CONFIG_SYS_FLASH_ERASE_TOUT	(2 * CONFIG_SYS_HZ) /* Erase Timeout */
#define CONFIG_SYS_FLASH_WRITE_TOUT	(2 * CONFIG_SYS_HZ) /* Write Timeout */

/* 255 0x40000 sectors + first or last sector may have 4 erase regions = 259 */
#define CONFIG_SYS_MAX_FLASH_SECT	259		/* Max sectors */
#define FLASH_MAX_SECTOR_SIZE		0x00040000	/* 256 KB sectors */

/* Room required on the stack for the environment data */
#define CONFIG_ENV_SIZE			FLASH_MAX_SECTOR_SIZE

#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* use buffered writes */

/*
 * Amount of flash used for environment:
 * We don't know which end has the small erase blocks so we use the penultimate
 * sector location for the environment
 */
#define CONFIG_ENV_SECT_SIZE		FLASH_MAX_SECTOR_SIZE
#define CONFIG_ENV_OVERWRITE		1

/* Store environment at top of flash */
#define CONFIG_ENV_OFFSET		(PHYS_FLASH_SIZE - \
					(2 * CONFIG_ENV_SECT_SIZE))
#define CONFIG_ENV_ADDR			(CONFIG_SYS_FLASH_BASE1 + \
					 CONFIG_ENV_OFFSET)
#define CONFIG_SYS_FLASH_PROTECTION	/* The devices have real protection */
#define CONFIG_SYS_FLASH_EMPTY_INFO	/* flinfo indicates empty blocks */
#define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE0, \
					  CONFIG_SYS_FLASH_BASE1 }

/* Monitor Command Prompt */
#define CONFIG_SYS_CBSIZE		512	/* Console I/O Buffer Size */

#endif /* VEXPRESS_COMMON_H */
Commit	Line	Data
83d290c5	1	/* SPDX-License-Identifier: GPL-2.0+ */
b80e41ac	2	/*
cd4f46e1	3	* (C) Copyright 2011 ARM Limited
b80e41ac MW	4	* (C) Copyright 2010 Linaro
	5	* Matt Waddel, <matt.waddel@linaro.org>
	6	*
	7	* Configuration for Versatile Express. Parts were derived from other ARM
	8	* configurations.
b80e41ac MW	9	*/
b80e41ac MW	10
cd4f46e1 RH	11	#ifndef __VEXPRESS_COMMON_H
	12	#define __VEXPRESS_COMMON_H
	13
	14	/*
	15	* Definitions copied from linux kernel:
	16	* arch/arm/mach-vexpress/include/mach/motherboard.h
	17	*/
	18	#ifdef CONFIG_VEXPRESS_ORIGINAL_MEMORY_MAP
	19	/* CS register bases for the original memory map. */
	20	#define V2M_PA_CS0 0x40000000
	21	#define V2M_PA_CS1 0x44000000
	22	#define V2M_PA_CS2 0x48000000
	23	#define V2M_PA_CS3 0x4c000000
	24	#define V2M_PA_CS7 0x10000000
	25
	26	#define V2M_PERIPH_OFFSET(x) (x << 12)
	27	#define V2M_SYSREGS (V2M_PA_CS7 + V2M_PERIPH_OFFSET(0))
	28	#define V2M_SYSCTL (V2M_PA_CS7 + V2M_PERIPH_OFFSET(1))
	29	#define V2M_SERIAL_BUS_PCI (V2M_PA_CS7 + V2M_PERIPH_OFFSET(2))
	30
	31	#define V2M_BASE 0x60000000
cd4f46e1 RH	32	#elif defined(CONFIG_VEXPRESS_EXTENDED_MEMORY_MAP)
	33	/* CS register bases for the extended memory map. */
	34	#define V2M_PA_CS0 0x08000000
	35	#define V2M_PA_CS1 0x0c000000
	36	#define V2M_PA_CS2 0x14000000
	37	#define V2M_PA_CS3 0x18000000
	38	#define V2M_PA_CS7 0x1c000000
	39
	40	#define V2M_PERIPH_OFFSET(x) (x << 16)
	41	#define V2M_SYSREGS (V2M_PA_CS7 + V2M_PERIPH_OFFSET(1))
	42	#define V2M_SYSCTL (V2M_PA_CS7 + V2M_PERIPH_OFFSET(2))
	43	#define V2M_SERIAL_BUS_PCI (V2M_PA_CS7 + V2M_PERIPH_OFFSET(3))
	44
	45	#define V2M_BASE 0x80000000
cd4f46e1 RH	46	#endif
	47
	48	/*
	49	* Physical addresses, offset from V2M_PA_CS0-3
	50	*/
	51	#define V2M_NOR0 (V2M_PA_CS0)
	52	#define V2M_NOR1 (V2M_PA_CS1)
	53	#define V2M_SRAM (V2M_PA_CS2)
	54	#define V2M_VIDEO_SRAM (V2M_PA_CS3 + 0x00000000)
cd4f46e1 RH	55	#define V2M_ISP1761 (V2M_PA_CS3 + 0x03000000)
	56
	57	/* Common peripherals relative to CS7. */
	58	#define V2M_AACI (V2M_PA_CS7 + V2M_PERIPH_OFFSET(4))
	59	#define V2M_MMCI (V2M_PA_CS7 + V2M_PERIPH_OFFSET(5))
	60	#define V2M_KMI0 (V2M_PA_CS7 + V2M_PERIPH_OFFSET(6))
	61	#define V2M_KMI1 (V2M_PA_CS7 + V2M_PERIPH_OFFSET(7))
	62
	63	#define V2M_UART0 (V2M_PA_CS7 + V2M_PERIPH_OFFSET(9))
	64	#define V2M_UART1 (V2M_PA_CS7 + V2M_PERIPH_OFFSET(10))
	65	#define V2M_UART2 (V2M_PA_CS7 + V2M_PERIPH_OFFSET(11))
	66	#define V2M_UART3 (V2M_PA_CS7 + V2M_PERIPH_OFFSET(12))
	67
	68	#define V2M_WDT (V2M_PA_CS7 + V2M_PERIPH_OFFSET(15))
	69
	70	#define V2M_TIMER01 (V2M_PA_CS7 + V2M_PERIPH_OFFSET(17))
	71	#define V2M_TIMER23 (V2M_PA_CS7 + V2M_PERIPH_OFFSET(18))
	72
	73	#define V2M_SERIAL_BUS_DVI (V2M_PA_CS7 + V2M_PERIPH_OFFSET(22))
	74	#define V2M_RTC (V2M_PA_CS7 + V2M_PERIPH_OFFSET(23))
	75
	76	#define V2M_CF (V2M_PA_CS7 + V2M_PERIPH_OFFSET(26))
	77
	78	#define V2M_CLCD (V2M_PA_CS7 + V2M_PERIPH_OFFSET(31))
	79	#define V2M_SIZE_CS7 V2M_PERIPH_OFFSET(32)
	80
	81	/* System register offsets. */
	82	#define V2M_SYS_CFGDATA (V2M_SYSREGS + 0x0a0)
	83	#define V2M_SYS_CFGCTRL (V2M_SYSREGS + 0x0a4)
	84	#define V2M_SYS_CFGSTAT (V2M_SYSREGS + 0x0a8)
	85
	86	/*
	87	* Configuration
	88	*/
	89	#define SYS_CFG_START (1 << 31)
	90	#define SYS_CFG_WRITE (1 << 30)
	91	#define SYS_CFG_OSC (1 << 20)
	92	#define SYS_CFG_VOLT (2 << 20)
	93	#define SYS_CFG_AMP (3 << 20)
	94	#define SYS_CFG_TEMP (4 << 20)
	95	#define SYS_CFG_RESET (5 << 20)
	96	#define SYS_CFG_SCC (6 << 20)
	97	#define SYS_CFG_MUXFPGA (7 << 20)
	98	#define SYS_CFG_SHUTDOWN (8 << 20)
	99	#define SYS_CFG_REBOOT (9 << 20)
	100	#define SYS_CFG_DVIMODE (11 << 20)
	101	#define SYS_CFG_POWER (12 << 20)
	102	#define SYS_CFG_SITE_MB (0 << 16)
	103	#define SYS_CFG_SITE_DB1 (1 << 16)
	104	#define SYS_CFG_SITE_DB2 (2 << 16)
	105	#define SYS_CFG_STACK(n) ((n) << 12)
	106
	107	#define SYS_CFG_ERR (1 << 1)
	108	#define SYS_CFG_COMPLETE (1 << 0)
b80e41ac MW	109
b80e41ac MW	110	/* Board info register */
cd4f46e1	111	#define SYS_ID V2M_SYSREGS
b80e41ac MW	112	#define CONFIG_REVISION_TAG 1
b80e41ac MW	113
cd4f46e1	114	#define CONFIG_SYS_MEMTEST_START V2M_BASE
b80e41ac	115	#define CONFIG_SYS_MEMTEST_END 0x20000000
b80e41ac MW	116
	117	#define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */
	118	#define CONFIG_SETUP_MEMORY_TAGS 1
e47f2db5	119	#define CONFIG_SYS_L2CACHE_OFF 1
b80e41ac	120	#define CONFIG_INITRD_TAG 1
2fa8ca98	121
b80e41ac MW	122	/* Size of malloc() pool */
b80e41ac MW	123	#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024)
b80e41ac	124
cd4f46e1	125	#define SCTL_BASE V2M_SYSCTL
b80e41ac MW	126	#define VEXPRESS_FLASHPROG_FLVPPEN (1 << 0)
b80e41ac MW	127
b3a7f22b	128	#define CONFIG_SYS_TIMER_RATE 1000000
cb7ee1b9	129	#define CONFIG_SYS_TIMER_COUNTER (V2M_TIMER01 + 0x4)
b3a7f22b RH	130	#define CONFIG_SYS_TIMER_COUNTS_DOWN
b3a7f22b RH	131
b80e41ac	132	/* PL011 Serial Configuration */
b80e41ac MW	133	#define CONFIG_PL011_CLOCK 24000000
	134	#define CONFIG_PL01x_PORTS {(void *)CONFIG_SYS_SERIAL0, \
	135	(void *)CONFIG_SYS_SERIAL1}
b80e41ac	136
cd4f46e1 RH	137	#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
	138	#define CONFIG_SYS_SERIAL0 V2M_UART0
	139	#define CONFIG_SYS_SERIAL1 V2M_UART1
b80e41ac	140
f0c64526	141	#define CONFIG_ARM_PL180_MMCI
cd4f46e1	142	#define CONFIG_ARM_PL180_MMCI_BASE V2M_MMCI
f0c64526 MW	143	#define CONFIG_SYS_MMC_MAX_BLK_COUNT 127
f0c64526 MW	144	#define CONFIG_ARM_PL180_MMCI_CLOCK_FREQ 6250000
b80e41ac MW	145
	146	/* BOOTP options */
	147	#define CONFIG_BOOTP_BOOTFILESIZE
b80e41ac MW	148
b80e41ac MW	149	/* Miscellaneous configurable options */
cd4f46e1 RH	150	#define CONFIG_SYS_LOAD_ADDR (V2M_BASE + 0x8000)
cd4f46e1 RH	151	#define LINUX_BOOT_PARAM_ADDR (V2M_BASE + 0x2000)
b80e41ac	152
b80e41ac MW	153	/* Physical Memory Map */
b80e41ac MW	154	#define CONFIG_NR_DRAM_BANKS 2
cd4f46e1 RH	155	#define PHYS_SDRAM_1 (V2M_BASE) /* SDRAM Bank #1 */
	156	#define PHYS_SDRAM_2 (((unsigned int)V2M_BASE) + \
	157	((unsigned int)0x20000000))
b80e41ac MW	158	#define PHYS_SDRAM_1_SIZE 0x20000000 /* 512 MB */
	159	#define PHYS_SDRAM_2_SIZE 0x20000000 /* 512 MB */
	160
	161	/* additions for new relocation code */
	162	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
553f0982	163	#define CONFIG_SYS_INIT_RAM_SIZE 0x1000
b80e41ac	164	#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_SDRAM_BASE + \
553f0982	165	CONFIG_SYS_INIT_RAM_SIZE - \
25ddd1fb	166	GENERATED_GBL_DATA_SIZE)
b80e41ac	167	#define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_GBL_DATA_OFFSET
acb5ff02	168
b80e41ac	169	/* Basic environment settings */
acb5ff02 DG	170	#define BOOT_TARGET_DEVICES(func) \
	171	func(MMC, mmc, 1) \
	172	func(MMC, mmc, 0) \
	173	func(PXE, pxe, na) \
	174	func(DHCP, dhcp, na)
	175	#include <config_distro_bootcmd.h>
	176
cd4f46e1 RH	177	#ifdef CONFIG_VEXPRESS_ORIGINAL_MEMORY_MAP
cd4f46e1 RH	178	#define CONFIG_PLATFORM_ENV_SETTINGS \
b80e41ac	179	"loadaddr=0x80008000\0" \
75e7f3f3 JH	180	"ramdisk_addr_r=0x61000000\0" \
	181	"kernel_addr=0x44100000\0" \
	182	"ramdisk_addr=0x44800000\0" \
	183	"maxramdisk=0x1800000\0" \
e21669fd	184	"pxefile_addr_r=0x88000000\0" \
acb5ff02	185	"scriptaddr=0x88000000\0" \
cd4f46e1 RH	186	"kernel_addr_r=0x80008000\0"
	187	#elif defined(CONFIG_VEXPRESS_EXTENDED_MEMORY_MAP)
	188	#define CONFIG_PLATFORM_ENV_SETTINGS \
	189	"loadaddr=0xa0008000\0" \
	190	"ramdisk_addr_r=0x81000000\0" \
	191	"kernel_addr=0x0c100000\0" \
	192	"ramdisk_addr=0x0c800000\0" \
	193	"maxramdisk=0x1800000\0" \
	194	"pxefile_addr_r=0xa8000000\0" \
acb5ff02	195	"scriptaddr=0xa8000000\0" \
cd4f46e1 RH	196	"kernel_addr_r=0xa0008000\0"
	197	#endif
	198	#define CONFIG_EXTRA_ENV_SETTINGS \
	199	CONFIG_PLATFORM_ENV_SETTINGS \
acb5ff02	200	BOOTENV \
b80e41ac MW	201	"console=ttyAMA0,38400n8\0" \
	202	"dram=1024M\0" \
	203	"root=/dev/sda1 rw\0" \
	204	"mtd=armflash:1M@0x800000(uboot),7M@0x1000000(kernel)," \
	205	"24M@0x2000000(initrd)\0" \
	206	"flashargs=setenv bootargs root=${root} console=${console} " \
	207	"mem=${dram} mtdparts=${mtd} mmci.fmax=190000 " \
	208	"devtmpfs.mount=0 vmalloc=256M\0" \
	209	"bootflash=run flashargs; " \
75e7f3f3 JH	210	"cp ${ramdisk_addr} ${ramdisk_addr_r} ${maxramdisk}; " \
75e7f3f3 JH	211	"bootm ${kernel_addr} ${ramdisk_addr_r}\0"
b80e41ac MW	212
	213	/* FLASH and environment organization */
	214	#define PHYS_FLASH_SIZE 0x04000000 /* 64MB */
	215	#define CONFIG_SYS_FLASH_CFI 1
	216	#define CONFIG_FLASH_CFI_DRIVER 1
	217	#define CONFIG_SYS_FLASH_SIZE 0x04000000
	218	#define CONFIG_SYS_MAX_FLASH_BANKS 2
cd4f46e1 RH	219	#define CONFIG_SYS_FLASH_BASE0 V2M_NOR0
cd4f46e1 RH	220	#define CONFIG_SYS_FLASH_BASE1 V2M_NOR1
b80e41ac MW	221	#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE0
	222
	223	/* Timeout values in ticks */
	224	#define CONFIG_SYS_FLASH_ERASE_TOUT (2 * CONFIG_SYS_HZ) /* Erase Timeout */
	225	#define CONFIG_SYS_FLASH_WRITE_TOUT (2 * CONFIG_SYS_HZ) /* Write Timeout */
	226
	227	/* 255 0x40000 sectors + first or last sector may have 4 erase regions = 259 */
	228	#define CONFIG_SYS_MAX_FLASH_SECT 259 /* Max sectors */
	229	#define FLASH_MAX_SECTOR_SIZE 0x00040000 /* 256 KB sectors */
	230
	231	/* Room required on the stack for the environment data */
	232	#define CONFIG_ENV_SIZE FLASH_MAX_SECTOR_SIZE
	233
de1f9ac8 JT	234	#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* use buffered writes */
de1f9ac8 JT	235
b80e41ac MW	236	/*
	237	* Amount of flash used for environment:
	238	* We don't know which end has the small erase blocks so we use the penultimate
	239	* sector location for the environment
	240	*/
	241	#define CONFIG_ENV_SECT_SIZE FLASH_MAX_SECTOR_SIZE
	242	#define CONFIG_ENV_OVERWRITE 1
	243
	244	/* Store environment at top of flash */
b80e41ac MW	245	#define CONFIG_ENV_OFFSET (PHYS_FLASH_SIZE - \
	246	(2 * CONFIG_ENV_SECT_SIZE))
	247	#define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE1 + \
	248	CONFIG_ENV_OFFSET)
	249	#define CONFIG_SYS_FLASH_PROTECTION /* The devices have real protection */
	250	#define CONFIG_SYS_FLASH_EMPTY_INFO /* flinfo indicates empty blocks */
	251	#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE0, \
	252	CONFIG_SYS_FLASH_BASE1 }
	253
	254	/* Monitor Command Prompt */
	255	#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
b80e41ac	256
cd4f46e1	257	#endif /* VEXPRESS_COMMON_H */