]>
Commit | Line | Data |
---|---|---|
8cba090c | 1 | /* |
29f8f58f | 2 | * (C) Copyright 2006-2008 |
8cba090c WD |
3 | * Wolfgang Denk, DENX Software Engineering, wd@denx.de. |
4 | * | |
5 | * See file CREDITS for list of people who contributed to this | |
6 | * project. | |
7 | * | |
8 | * This program is free software; you can redistribute it and/or | |
9 | * modify it under the terms of the GNU General Public License as | |
10 | * published by the Free Software Foundation; either version 2 of | |
11 | * the License, or (at your option) any later version. | |
12 | * | |
13 | * This program is distributed in the hope that it will be useful, | |
14 | * but WITHOUT ANY WARRANTY; without even the implied warranty of | |
15 | * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the | |
16 | * GNU General Public License for more details. | |
17 | * | |
18 | * You should have received a copy of the GNU General Public License | |
19 | * along with this program; if not, write to the Free Software | |
20 | * Foundation, Inc., 59 Temple Place, Suite 330, Boston, | |
21 | * MA 02111-1307 USA | |
22 | */ | |
23 | ||
24 | /* | |
25 | * board/config.h - configuration options, board specific | |
26 | */ | |
27 | ||
28 | #ifndef __CONFIG_H | |
29 | #define __CONFIG_H | |
30 | ||
31 | /* | |
32 | * High Level Configuration Options | |
33 | * (easy to change) | |
34 | */ | |
35 | ||
36 | #define CONFIG_MPC823 1 /* This is a MPC823 CPU */ | |
37 | #define CONFIG_VIRTLAB2 1 /* ...on a virtlab2 module */ | |
38 | #define CONFIG_TQM8xxL 1 | |
39 | ||
8cba090c WD |
40 | #define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */ |
41 | #undef CONFIG_8xx_CONS_SMC2 | |
42 | #undef CONFIG_8xx_CONS_NONE | |
43 | #define CONFIG_BAUDRATE 115200 /* console baudrate = 115kbps */ | |
44 | ||
45 | #define CONFIG_BOOTCOUNT_LIMIT | |
46 | ||
47 | #define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ | |
48 | ||
49 | #define CONFIG_BOARD_TYPES 1 /* support board types */ | |
50 | ||
32bf3d14 | 51 | #define CONFIG_PREBOOT "echo;echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;echo" |
8cba090c WD |
52 | |
53 | #undef CONFIG_BOOTARGS | |
54 | ||
55 | #define CONFIG_EXTRA_ENV_SETTINGS \ | |
56 | "netdev=eth0\0" \ | |
57 | "nfsargs=setenv bootargs root=/dev/nfs rw " \ | |
58 | "nfsroot=${serverip}:${rootpath}\0" \ | |
59 | "ramargs=setenv bootargs root=/dev/ram rw\0" \ | |
60 | "addip=setenv bootargs ${bootargs} " \ | |
61 | "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ | |
62 | ":${hostname}:${netdev}:off panic=1\0" \ | |
63 | "flash_nfs=run nfsargs addip;" \ | |
64 | "bootm ${kernel_addr}\0" \ | |
65 | "flash_self=run ramargs addip;" \ | |
66 | "bootm ${kernel_addr} ${ramdisk_addr}\0" \ | |
67 | "net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \ | |
68 | "rootpath=/opt/eldk/ppc_8xx\0" \ | |
29f8f58f WD |
69 | "hostname=virtlab2\0" \ |
70 | "bootfile=virtlab2/uImage\0" \ | |
71 | "fdt_addr=40040000\0" \ | |
72 | "kernel_addr=40060000\0" \ | |
73 | "ramdisk_addr=40200000\0" \ | |
74 | "u-boot=virtlab2/u-image.bin\0" \ | |
75 | "load=tftp 200000 ${u-boot}\0" \ | |
76 | "update=prot off 40000000 +${filesize};" \ | |
77 | "era 40000000 +${filesize};" \ | |
78 | "cp.b 200000 40000000 ${filesize};" \ | |
79 | "sete filesize;save\0" \ | |
8cba090c WD |
80 | "" |
81 | #define CONFIG_BOOTCOMMAND "run flash_self" | |
82 | ||
83 | #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ | |
6d0f6bcf | 84 | #undef CONFIG_SYS_LOADS_BAUD_CHANGE /* don't allow baudrate change */ |
8cba090c WD |
85 | |
86 | #undef CONFIG_WATCHDOG /* watchdog disabled */ | |
87 | ||
88 | #if defined(CONFIG_LCD) | |
89 | # undef CONFIG_STATUS_LED /* disturbs display */ | |
90 | #else | |
91 | # define CONFIG_STATUS_LED 1 /* Status LED enabled */ | |
92 | #endif /* CONFIG_LCD */ | |
93 | ||
94 | #undef CONFIG_CAN_DRIVER /* CAN Driver support disabled */ | |
95 | ||
d3b8c1a7 JL |
96 | /* |
97 | * BOOTP options | |
98 | */ | |
99 | #define CONFIG_BOOTP_SUBNETMASK | |
100 | #define CONFIG_BOOTP_GATEWAY | |
101 | #define CONFIG_BOOTP_HOSTNAME | |
102 | #define CONFIG_BOOTP_BOOTPATH | |
103 | #define CONFIG_BOOTP_BOOTFILESIZE | |
104 | ||
8cba090c WD |
105 | |
106 | #define CONFIG_MAC_PARTITION | |
107 | #define CONFIG_DOS_PARTITION | |
108 | ||
109 | #define CONFIG_RTC_MPC8xx /* use internal RTC of MPC8xx */ | |
110 | ||
dca3b3d6 JL |
111 | |
112 | /* | |
113 | * Command line configuration. | |
114 | */ | |
115 | #include <config_cmd_default.h> | |
116 | ||
117 | #define CONFIG_CMD_ASKENV | |
118 | #define CONFIG_CMD_DATE | |
119 | #define CONFIG_CMD_DHCP | |
9a63b7f4 | 120 | #define CONFIG_CMD_EXT2 |
dca3b3d6 | 121 | #define CONFIG_CMD_IDE |
29f8f58f | 122 | #define CONFIG_CMD_JFFS2 |
dca3b3d6 JL |
123 | #define CONFIG_CMD_NFS |
124 | #define CONFIG_CMD_SNTP | |
125 | ||
126 | #if defined(CONFIG_SPLASH_SCREEN) | |
127 | #define CONFIG_CMD_BMP | |
8cba090c WD |
128 | #endif |
129 | ||
8cba090c | 130 | |
29f8f58f WD |
131 | #define CONFIG_NETCONSOLE |
132 | ||
8cba090c WD |
133 | /* |
134 | * Miscellaneous configurable options | |
135 | */ | |
6d0f6bcf JCPV |
136 | #define CONFIG_SYS_LONGHELP /* undef to save memory */ |
137 | #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ | |
8cba090c | 138 | |
29f8f58f | 139 | #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ |
6d0f6bcf JCPV |
140 | #define CONFIG_SYS_HUSH_PARSER 1 /* use "hush" command parser */ |
141 | #ifdef CONFIG_SYS_HUSH_PARSER | |
142 | #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " | |
8cba090c WD |
143 | #endif |
144 | ||
dca3b3d6 | 145 | #if defined(CONFIG_CMD_KGDB) |
6d0f6bcf | 146 | #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ |
8cba090c | 147 | #else |
6d0f6bcf | 148 | #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ |
8cba090c | 149 | #endif |
6d0f6bcf JCPV |
150 | #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ |
151 | #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ | |
152 | #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ | |
8cba090c | 153 | |
6d0f6bcf JCPV |
154 | #define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */ |
155 | #define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ | |
8cba090c | 156 | |
6d0f6bcf | 157 | #define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ |
8cba090c | 158 | |
6d0f6bcf | 159 | #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1 ms ticks */ |
8cba090c | 160 | |
6d0f6bcf | 161 | #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } |
8cba090c WD |
162 | |
163 | /* | |
164 | * Low Level Configuration Settings | |
165 | * (address mappings, register initial values, etc.) | |
166 | * You should know what you are doing if you make changes here. | |
167 | */ | |
168 | /*----------------------------------------------------------------------- | |
169 | * Internal Memory Mapped Register | |
170 | */ | |
6d0f6bcf | 171 | #define CONFIG_SYS_IMMR 0xFFF00000 |
8cba090c WD |
172 | |
173 | /*----------------------------------------------------------------------- | |
174 | * Definitions for initial stack pointer and data area (in DPRAM) | |
175 | */ | |
6d0f6bcf JCPV |
176 | #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_IMMR |
177 | #define CONFIG_SYS_INIT_RAM_END 0x2F00 /* End of used area in DPRAM */ | |
178 | #define CONFIG_SYS_GBL_DATA_SIZE 64 /* size in bytes reserved for initial data */ | |
179 | #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) | |
180 | #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET | |
8cba090c WD |
181 | |
182 | /*----------------------------------------------------------------------- | |
183 | * Start addresses for the final memory configuration | |
184 | * (Set up by the startup code) | |
6d0f6bcf | 185 | * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 |
8cba090c | 186 | */ |
6d0f6bcf JCPV |
187 | #define CONFIG_SYS_SDRAM_BASE 0x00000000 |
188 | #define CONFIG_SYS_FLASH_BASE 0x40000000 | |
189 | #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ | |
190 | #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE | |
191 | #define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ | |
8cba090c WD |
192 | |
193 | /* | |
194 | * For booting Linux, the board info and command line data | |
195 | * have to be in the first 8 MB of memory, since this is | |
196 | * the maximum mapped by the Linux kernel during initialization. | |
197 | */ | |
6d0f6bcf | 198 | #define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ |
8cba090c WD |
199 | |
200 | /*----------------------------------------------------------------------- | |
201 | * FLASH organization | |
202 | */ | |
8cba090c | 203 | |
e318d9e9 | 204 | /* use CFI flash driver */ |
6d0f6bcf | 205 | #define CONFIG_SYS_FLASH_CFI 1 /* Flash is CFI conformant */ |
00b1883a | 206 | #define CONFIG_FLASH_CFI_DRIVER 1 /* Use the common driver */ |
6d0f6bcf JCPV |
207 | #define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE+flash_info[0].size } |
208 | #define CONFIG_SYS_FLASH_EMPTY_INFO | |
209 | #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 | |
210 | #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */ | |
211 | #define CONFIG_SYS_MAX_FLASH_SECT 71 /* max number of sectors on one chip */ | |
8cba090c | 212 | |
5a1aceb0 | 213 | #define CONFIG_ENV_IS_IN_FLASH 1 |
0e8d1586 JCPV |
214 | #define CONFIG_ENV_OFFSET 0x8000 /* Offset of Environment Sector */ |
215 | #define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */ | |
8cba090c WD |
216 | |
217 | /* Address and size of Redundant Environment Sector */ | |
0e8d1586 JCPV |
218 | #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET+CONFIG_ENV_SIZE) |
219 | #define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) | |
8cba090c | 220 | |
6d0f6bcf | 221 | #define CONFIG_SYS_USE_PPCENV /* Environment embedded in sect .ppcenv */ |
67c31036 | 222 | |
7c803be2 WD |
223 | #define CONFIG_MISC_INIT_R /* Make sure to remap flashes correctly */ |
224 | ||
29f8f58f WD |
225 | /*----------------------------------------------------------------------- |
226 | * Dynamic MTD partition support | |
227 | */ | |
68d7d651 | 228 | #define CONFIG_CMD_MTDPARTS |
29f8f58f WD |
229 | #define MTDIDS_DEFAULT "nor0=TQM8xxL-0" |
230 | ||
231 | #define MTDPARTS_DEFAULT "mtdparts=TQM8xxL-0:256k(u-boot)," \ | |
232 | "128k(dtb)," \ | |
233 | "1664k(kernel)," \ | |
234 | "2m(rootfs)," \ | |
cd82919e | 235 | "4m(data)" |
29f8f58f | 236 | |
8cba090c WD |
237 | /*----------------------------------------------------------------------- |
238 | * Hardware Information Block | |
239 | */ | |
6d0f6bcf JCPV |
240 | #define CONFIG_SYS_HWINFO_OFFSET 0x0003FFC0 /* offset of HW Info block */ |
241 | #define CONFIG_SYS_HWINFO_SIZE 0x00000040 /* size of HW Info block */ | |
242 | #define CONFIG_SYS_HWINFO_MAGIC 0x54514D38 /* 'TQM8' */ | |
8cba090c WD |
243 | |
244 | /*----------------------------------------------------------------------- | |
245 | * Cache Configuration | |
246 | */ | |
6d0f6bcf | 247 | #define CONFIG_SYS_CACHELINE_SIZE 16 /* For all MPC8xx CPUs */ |
dca3b3d6 | 248 | #if defined(CONFIG_CMD_KGDB) |
6d0f6bcf | 249 | #define CONFIG_SYS_CACHELINE_SHIFT 4 /* log base 2 of the above value */ |
8cba090c WD |
250 | #endif |
251 | ||
252 | /*----------------------------------------------------------------------- | |
253 | * SYPCR - System Protection Control 11-9 | |
254 | * SYPCR can only be written once after reset! | |
255 | *----------------------------------------------------------------------- | |
256 | * Software & Bus Monitor Timer max, Bus Monitor enable, SW Watchdog freeze | |
257 | */ | |
258 | #if defined(CONFIG_WATCHDOG) | |
6d0f6bcf | 259 | #define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | \ |
8cba090c WD |
260 | SYPCR_SWE | SYPCR_SWRI| SYPCR_SWP) |
261 | #else | |
6d0f6bcf | 262 | #define CONFIG_SYS_SYPCR (SYPCR_SWTC | SYPCR_BMT | SYPCR_BME | SYPCR_SWF | SYPCR_SWP) |
8cba090c WD |
263 | #endif |
264 | ||
265 | /*----------------------------------------------------------------------- | |
266 | * SIUMCR - SIU Module Configuration 11-6 | |
267 | *----------------------------------------------------------------------- | |
268 | * PCMCIA config., multi-function pin tri-state | |
269 | */ | |
270 | #ifndef CONFIG_CAN_DRIVER | |
6d0f6bcf | 271 | #define CONFIG_SYS_SIUMCR (SIUMCR_DBGC00 | SIUMCR_DBPC00 | SIUMCR_MLRC01) |
8cba090c | 272 | #else /* we must activate GPL5 in the SIUMCR for CAN */ |
6d0f6bcf | 273 | #define CONFIG_SYS_SIUMCR (SIUMCR_DBGC11 | SIUMCR_DBPC00 | SIUMCR_MLRC01) |
8cba090c WD |
274 | #endif /* CONFIG_CAN_DRIVER */ |
275 | ||
276 | /*----------------------------------------------------------------------- | |
277 | * TBSCR - Time Base Status and Control 11-26 | |
278 | *----------------------------------------------------------------------- | |
279 | * Clear Reference Interrupt Status, Timebase freezing enabled | |
280 | */ | |
6d0f6bcf | 281 | #define CONFIG_SYS_TBSCR (TBSCR_REFA | TBSCR_REFB | TBSCR_TBF) |
8cba090c WD |
282 | |
283 | /*----------------------------------------------------------------------- | |
284 | * RTCSC - Real-Time Clock Status and Control Register 11-27 | |
285 | *----------------------------------------------------------------------- | |
286 | */ | |
6d0f6bcf | 287 | #define CONFIG_SYS_RTCSC (RTCSC_SEC | RTCSC_ALR | RTCSC_RTF| RTCSC_RTE) |
8cba090c WD |
288 | |
289 | /*----------------------------------------------------------------------- | |
290 | * PISCR - Periodic Interrupt Status and Control 11-31 | |
291 | *----------------------------------------------------------------------- | |
292 | * Clear Periodic Interrupt Status, Interrupt Timer freezing enabled | |
293 | */ | |
6d0f6bcf | 294 | #define CONFIG_SYS_PISCR (PISCR_PS | PISCR_PITF) |
8cba090c WD |
295 | |
296 | /*----------------------------------------------------------------------- | |
297 | * PLPRCR - PLL, Low-Power, and Reset Control Register 15-30 | |
298 | *----------------------------------------------------------------------- | |
299 | * Reset PLL lock status sticky bit, timer expired status bit and timer | |
300 | * interrupt status bit | |
301 | */ | |
6d0f6bcf | 302 | #define CONFIG_SYS_PLPRCR (PLPRCR_SPLSS | PLPRCR_TEXPS | PLPRCR_TMIST) |
8cba090c WD |
303 | |
304 | /*----------------------------------------------------------------------- | |
305 | * SCCR - System Clock and reset Control Register 15-27 | |
306 | *----------------------------------------------------------------------- | |
307 | * Set clock output, timebase and RTC source and divider, | |
308 | * power management and some other internal clocks | |
309 | */ | |
310 | #define SCCR_MASK SCCR_EBDF11 | |
6d0f6bcf | 311 | #define CONFIG_SYS_SCCR (SCCR_COM00 | SCCR_DFSYNC00 | SCCR_DFBRG00 | \ |
8cba090c WD |
312 | SCCR_DFNL000 | SCCR_DFNH000 | SCCR_DFLCD000 | \ |
313 | SCCR_DFALCD00) | |
314 | ||
315 | /*----------------------------------------------------------------------- | |
316 | * PCMCIA stuff | |
317 | *----------------------------------------------------------------------- | |
318 | * | |
319 | */ | |
6d0f6bcf JCPV |
320 | #define CONFIG_SYS_PCMCIA_MEM_ADDR (0xE0000000) |
321 | #define CONFIG_SYS_PCMCIA_MEM_SIZE ( 64 << 20 ) | |
322 | #define CONFIG_SYS_PCMCIA_DMA_ADDR (0xE4000000) | |
323 | #define CONFIG_SYS_PCMCIA_DMA_SIZE ( 64 << 20 ) | |
324 | #define CONFIG_SYS_PCMCIA_ATTRB_ADDR (0xE8000000) | |
325 | #define CONFIG_SYS_PCMCIA_ATTRB_SIZE ( 64 << 20 ) | |
326 | #define CONFIG_SYS_PCMCIA_IO_ADDR (0xEC000000) | |
327 | #define CONFIG_SYS_PCMCIA_IO_SIZE ( 64 << 20 ) | |
8cba090c WD |
328 | |
329 | /*----------------------------------------------------------------------- | |
330 | * IDE/ATA stuff (Supports IDE harddisk on PCMCIA Adapter) | |
331 | *----------------------------------------------------------------------- | |
332 | */ | |
333 | ||
334 | #define CONFIG_IDE_8xx_PCCARD 1 /* Use IDE with PC Card Adapter */ | |
335 | ||
336 | #undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */ | |
337 | #undef CONFIG_IDE_LED /* LED for ide not supported */ | |
338 | #undef CONFIG_IDE_RESET /* reset for ide not supported */ | |
339 | ||
6d0f6bcf JCPV |
340 | #define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */ |
341 | #define CONFIG_SYS_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */ | |
8cba090c | 342 | |
6d0f6bcf | 343 | #define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 |
8cba090c | 344 | |
6d0f6bcf | 345 | #define CONFIG_SYS_ATA_BASE_ADDR CONFIG_SYS_PCMCIA_MEM_ADDR |
8cba090c WD |
346 | |
347 | /* Offset for data I/O */ | |
6d0f6bcf | 348 | #define CONFIG_SYS_ATA_DATA_OFFSET (CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320) |
8cba090c WD |
349 | |
350 | /* Offset for normal register accesses */ | |
6d0f6bcf | 351 | #define CONFIG_SYS_ATA_REG_OFFSET (2 * CONFIG_SYS_PCMCIA_MEM_SIZE + 0x320) |
8cba090c WD |
352 | |
353 | /* Offset for alternate registers */ | |
6d0f6bcf | 354 | #define CONFIG_SYS_ATA_ALT_OFFSET 0x0100 |
8cba090c WD |
355 | |
356 | /*----------------------------------------------------------------------- | |
357 | * | |
358 | *----------------------------------------------------------------------- | |
359 | * | |
360 | */ | |
6d0f6bcf | 361 | #define CONFIG_SYS_DER 0 |
8cba090c WD |
362 | |
363 | /* | |
364 | * Init Memory Controller: | |
365 | * | |
366 | * BR0/1 and OR0/1 (FLASH) | |
367 | */ | |
368 | ||
369 | #define FLASH_BASE0_PRELIM 0x40000000 /* FLASH bank #0 */ | |
370 | #define FLASH_BASE1_PRELIM 0x60000000 /* FLASH bank #0 */ | |
371 | ||
372 | /* used to re-map FLASH both when starting from SRAM or FLASH: | |
373 | * restrict access enough to keep SRAM working (if any) | |
374 | * but not too much to meddle with FLASH accesses | |
375 | */ | |
6d0f6bcf JCPV |
376 | #define CONFIG_SYS_REMAP_OR_AM 0x80000000 /* OR addr mask */ |
377 | #define CONFIG_SYS_PRELIM_OR_AM 0xE0000000 /* OR addr mask */ | |
8cba090c WD |
378 | |
379 | /* | |
380 | * FLASH timing: | |
381 | */ | |
6d0f6bcf | 382 | #define CONFIG_SYS_OR_TIMING_FLASH (OR_ACS_DIV1 | OR_TRLX | OR_CSNT_SAM | \ |
8cba090c WD |
383 | OR_SCY_3_CLK | OR_EHTR | OR_BI) |
384 | ||
6d0f6bcf JCPV |
385 | #define CONFIG_SYS_OR0_REMAP (CONFIG_SYS_REMAP_OR_AM | CONFIG_SYS_OR_TIMING_FLASH) |
386 | #define CONFIG_SYS_OR0_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_FLASH) | |
387 | #define CONFIG_SYS_BR0_PRELIM ((FLASH_BASE0_PRELIM & BR_BA_MSK) | BR_V ) | |
8cba090c | 388 | |
6d0f6bcf JCPV |
389 | #define CONFIG_SYS_OR1_REMAP CONFIG_SYS_OR0_REMAP |
390 | #define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_OR0_PRELIM | |
391 | #define CONFIG_SYS_BR1_PRELIM ((FLASH_BASE1_PRELIM & BR_BA_MSK) | BR_V ) | |
8cba090c WD |
392 | |
393 | /* | |
394 | * BR2/3 and OR2/3 (SDRAM) | |
395 | * | |
396 | */ | |
397 | #define SDRAM_BASE2_PRELIM 0x00000000 /* SDRAM bank #0 */ | |
398 | #define SDRAM_BASE3_PRELIM 0x20000000 /* SDRAM bank #1 */ | |
399 | #define SDRAM_MAX_SIZE 0x04000000 /* max 64 MB per bank */ | |
400 | ||
401 | /* SDRAM timing: Multiplexed addresses, GPL5 output to GPL5_A (don't care) */ | |
6d0f6bcf | 402 | #define CONFIG_SYS_OR_TIMING_SDRAM 0x00000A00 |
8cba090c | 403 | |
6d0f6bcf JCPV |
404 | #define CONFIG_SYS_OR2_PRELIM (CONFIG_SYS_PRELIM_OR_AM | CONFIG_SYS_OR_TIMING_SDRAM ) |
405 | #define CONFIG_SYS_BR2_PRELIM ((SDRAM_BASE2_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V ) | |
8cba090c WD |
406 | |
407 | #ifndef CONFIG_CAN_DRIVER | |
6d0f6bcf JCPV |
408 | #define CONFIG_SYS_OR3_PRELIM CONFIG_SYS_OR2_PRELIM |
409 | #define CONFIG_SYS_BR3_PRELIM ((SDRAM_BASE3_PRELIM & BR_BA_MSK) | BR_MS_UPMA | BR_V ) | |
8cba090c | 410 | #else /* CAN uses CS3#, so we can have only one SDRAM bank anyway */ |
6d0f6bcf JCPV |
411 | #define CONFIG_SYS_CAN_BASE 0xC0000000 /* CAN mapped at 0xC0000000 */ |
412 | #define CONFIG_SYS_CAN_OR_AM 0xFFFF8000 /* 32 kB address mask */ | |
413 | #define CONFIG_SYS_OR3_CAN (CONFIG_SYS_CAN_OR_AM | OR_G5LA | OR_BI) | |
414 | #define CONFIG_SYS_BR3_CAN ((CONFIG_SYS_CAN_BASE & BR_BA_MSK) | \ | |
8cba090c WD |
415 | BR_PS_8 | BR_MS_UPMB | BR_V ) |
416 | #endif /* CONFIG_CAN_DRIVER */ | |
417 | ||
418 | /* | |
419 | * Memory Periodic Timer Prescaler | |
420 | * | |
421 | * The Divider for PTA (refresh timer) configuration is based on an | |
422 | * example SDRAM configuration (64 MBit, one bank). The adjustment to | |
423 | * the number of chip selects (NCS) and the actually needed refresh | |
424 | * rate is done by setting MPTPR. | |
425 | * | |
426 | * PTA is calculated from | |
427 | * PTA = (gclk * Trefresh) / ((2 ^ (2 * DFBRG)) * PTP * NCS) | |
428 | * | |
429 | * gclk CPU clock (not bus clock!) | |
430 | * Trefresh Refresh cycle * 4 (four word bursts used) | |
431 | * | |
432 | * 4096 Rows from SDRAM example configuration | |
433 | * 1000 factor s -> ms | |
434 | * 32 PTP (pre-divider from MPTPR) from SDRAM example configuration | |
435 | * 4 Number of refresh cycles per period | |
436 | * 64 Refresh cycle in ms per number of rows | |
437 | * -------------------------------------------- | |
438 | * Divider = 4096 * 32 * 1000 / (4 * 64) = 512000 | |
439 | * | |
440 | * 50 MHz => 50.000.000 / Divider = 98 | |
441 | * 66 Mhz => 66.000.000 / Divider = 129 | |
442 | * 80 Mhz => 80.000.000 / Divider = 156 | |
443 | */ | |
444 | ||
6d0f6bcf JCPV |
445 | #define CONFIG_SYS_PTA_PER_CLK ((4096 * 32 * 1000) / (4 * 64)) |
446 | #define CONFIG_SYS_MAMR_PTA 98 | |
8cba090c WD |
447 | |
448 | /* | |
449 | * For 16 MBit, refresh rates could be 31.3 us | |
450 | * (= 64 ms / 2K = 125 / quad bursts). | |
451 | * For a simpler initialization, 15.6 us is used instead. | |
452 | * | |
6d0f6bcf JCPV |
453 | * #define CONFIG_SYS_MPTPR_2BK_2K MPTPR_PTP_DIV32 for 2 banks |
454 | * #define CONFIG_SYS_MPTPR_1BK_2K MPTPR_PTP_DIV64 for 1 bank | |
8cba090c | 455 | */ |
6d0f6bcf JCPV |
456 | #define CONFIG_SYS_MPTPR_2BK_4K MPTPR_PTP_DIV16 /* setting for 2 banks */ |
457 | #define CONFIG_SYS_MPTPR_1BK_4K MPTPR_PTP_DIV32 /* setting for 1 bank */ | |
8cba090c WD |
458 | |
459 | /* refresh rate 7.8 us (= 64 ms / 8K = 31.2 / quad bursts) for 256 MBit */ | |
6d0f6bcf JCPV |
460 | #define CONFIG_SYS_MPTPR_2BK_8K MPTPR_PTP_DIV8 /* setting for 2 banks */ |
461 | #define CONFIG_SYS_MPTPR_1BK_8K MPTPR_PTP_DIV16 /* setting for 1 bank */ | |
8cba090c WD |
462 | |
463 | /* | |
464 | * MAMR settings for SDRAM | |
465 | */ | |
466 | ||
467 | /* 8 column SDRAM */ | |
6d0f6bcf | 468 | #define CONFIG_SYS_MAMR_8COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \ |
8cba090c WD |
469 | MAMR_AMA_TYPE_0 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A11 | \ |
470 | MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) | |
471 | /* 9 column SDRAM */ | |
6d0f6bcf | 472 | #define CONFIG_SYS_MAMR_9COL ((CONFIG_SYS_MAMR_PTA << MAMR_PTA_SHIFT) | MAMR_PTAE | \ |
8cba090c WD |
473 | MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 | \ |
474 | MAMR_RLFA_1X | MAMR_WLFA_1X | MAMR_TLFA_4X) | |
475 | ||
476 | ||
477 | /* | |
478 | * Internal Definitions | |
479 | * | |
480 | * Boot Flags | |
481 | */ | |
482 | #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ | |
483 | #define BOOTFLAG_WARM 0x02 /* Software reboot */ | |
484 | ||
485 | /* Map peripheral control registers on CS4 */ | |
6d0f6bcf JCPV |
486 | #define CONFIG_SYS_PERIPHERAL_BASE 0xA0000000 |
487 | #define CONFIG_SYS_PERIPHERAL_OR_AM 0xFFFF8000 /* 32 kB address mask */ | |
488 | #define CONFIG_SYS_OR4_PRELIM (CONFIG_SYS_PERIPHERAL_OR_AM | OR_TRLX | OR_CSNT_SAM | \ | |
8cba090c | 489 | OR_SCY_2_CLK) |
6d0f6bcf JCPV |
490 | #define CONFIG_SYS_BR4_PRELIM ((CONFIG_SYS_PERIPHERAL_BASE & BR_BA_MSK) | BR_PS_8 | BR_V) |
491 | #define PCMCIA_CTRL (CONFIG_SYS_PERIPHERAL_BASE + 0xB00) | |
8cba090c | 492 | #endif /* __CONFIG_H */ |