[people/ms/u-boot.git] / include / configs / warp7.h

/*
 * Copyright (C) 2016 NXP Semiconductors
 *
 * Configuration settings for the i.MX7S Warp board.
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef __WARP7_CONFIG_H
#define __WARP7_CONFIG_H

#include "mx7_common.h"

#define PHYS_SDRAM_SIZE			SZ_512M

#define CONFIG_MXC_UART_BASE		UART1_IPS_BASE_ADDR

/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN		(35 * SZ_1M)

#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_BOARD_LATE_INIT

/* MMC Config*/
#define CONFIG_SYS_FSL_ESDHC_ADDR       USDHC3_BASE_ADDR
#define CONFIG_SUPPORT_EMMC_BOOT
#define CONFIG_SYS_FSL_ESDHC_HAS_DDR_MODE
#define CONFIG_SYS_MMC_IMG_LOAD_PART	1

#define CONFIG_DFU_ENV_SETTINGS \
	"dfu_alt_info=boot raw 0x2 0x400 mmcpart 1\0" \

#define CONFIG_EXTRA_ENV_SETTINGS \
	CONFIG_DFU_ENV_SETTINGS \
	"script=boot.scr\0" \
	"image=zImage\0" \
	"console=ttymxc0\0" \
	"fdt_high=0xffffffff\0" \
	"initrd_high=0xffffffff\0" \
	"fdt_file=imx7d-warp.dtb\0" \
	"fdt_addr=0x83000000\0" \
	"boot_fdt=try\0" \
	"ip_dyn=yes\0" \
	"mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
	"mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
	"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
	"mmcargs=setenv bootargs console=${console},${baudrate} " \
		"root=${mmcroot}\0" \
	"loadbootscript=" \
		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
	"bootscript=echo Running bootscript from mmc ...; " \
		"source\0" \
	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
	"mmcboot=echo Booting from mmc ...; " \
		"run mmcargs; " \
		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
			"if run loadfdt; then " \
				"bootz ${loadaddr} - ${fdt_addr}; " \
			"else " \
				"if test ${boot_fdt} = try; then " \
					"bootz; " \
				"else " \
					"echo WARN: Cannot load the DT; " \
				"fi; " \
			"fi; " \
		"else " \
			"bootz; " \
		"fi;\0" \

#define CONFIG_BOOTCOMMAND \
	   "mmc dev ${mmcdev};" \
	   "mmc dev ${mmcdev}; if mmc rescan; then " \
		   "if run loadbootscript; then " \
			   "run bootscript; " \
		   "else " \
			   "if run loadimage; then " \
				   "run mmcboot; " \
			   "fi; " \
		   "fi; " \
	   "fi"

#define CONFIG_SYS_MEMTEST_START	0x80000000
#define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + 0x20000000)

#define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
#define CONFIG_SYS_HZ			1000

#define CONFIG_STACKSIZE		SZ_128K

/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS		1
#define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR

#define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE

#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

/* FLASH and environment organization */
#define CONFIG_SYS_NO_FLASH
#define CONFIG_ENV_SIZE			SZ_8K
#define CONFIG_ENV_IS_IN_MMC

#define CONFIG_ENV_OFFSET		(8 * SZ_64K)
#define CONFIG_SYS_FSL_USDHC_NUM	1

#define CONFIG_SYS_MMC_ENV_DEV		0
#define CONFIG_SYS_MMC_ENV_PART		0
#define CONFIG_MMCROOT			"/dev/mmcblk2p2"

/* USB Configs */
#define CONFIG_USB_EHCI
#define CONFIG_USB_EHCI_MX7
#define CONFIG_USB_STORAGE
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET

#define CONFIG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS		0
#define CONFIG_USB_MAX_CONTROLLER_COUNT 1 /* Only OTG1 port enabled */

#define CONFIG_IMX_THERMAL

#define CONFIG_CI_UDC
#define CONFIG_USBD_HS
#define CONFIG_USB_GADGET_DUALSPEED

#define CONFIG_USB_GADGET
#define CONFIG_USB_FUNCTION_MASS_STORAGE
#define CONFIG_USB_GADGET_DOWNLOAD
#define CONFIG_USB_GADGET_VBUS_DRAW	2

#define CONFIG_G_DNL_VENDOR_NUM		0x0525
#define CONFIG_G_DNL_PRODUCT_NUM	0xa4a5
#define CONFIG_G_DNL_MANUFACTURER	"FSL"

/* USB Device Firmware Update support */
#define CONFIG_USB_FUNCTION_DFU
#define CONFIG_DFU_MMC
#define CONFIG_SYS_DFU_DATA_BUF_SIZE	SZ_16M
#define DFU_DEFAULT_POLL_TIMEOUT	300

#endif
Commit	Line	Data
47173483 FE	1	/*
	2	* Copyright (C) 2016 NXP Semiconductors
	3	*
	4	* Configuration settings for the i.MX7S Warp board.
	5	*
	6	* SPDX-License-Identifier: GPL-2.0+
	7	*/
	8
	9	#ifndef __WARP7_CONFIG_H
	10	#define __WARP7_CONFIG_H
	11
47173483 FE	12	#include "mx7_common.h"
	13
	14	#define PHYS_SDRAM_SIZE SZ_512M
	15
01f512bc FE	16	#define CONFIG_MXC_UART_BASE UART1_IPS_BASE_ADDR
01f512bc FE	17
6baa2616	18	/* Size of malloc() pool */
67ef2c13	19	#define CONFIG_SYS_MALLOC_LEN (35 * SZ_1M)
6baa2616	20
47173483	21	#define CONFIG_BOARD_EARLY_INIT_F
0a35cc93	22	#define CONFIG_BOARD_LATE_INIT
47173483 FE	23
	24	/* MMC Config*/
	25	#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC3_BASE_ADDR
	26	#define CONFIG_SUPPORT_EMMC_BOOT
	27	#define CONFIG_SYS_FSL_ESDHC_HAS_DDR_MODE
	28	#define CONFIG_SYS_MMC_IMG_LOAD_PART 1
	29
	30	#define CONFIG_DFU_ENV_SETTINGS \
67ef2c13	31	"dfu_alt_info=boot raw 0x2 0x400 mmcpart 1\0" \
47173483 FE	32
	33	#define CONFIG_EXTRA_ENV_SETTINGS \
	34	CONFIG_DFU_ENV_SETTINGS \
	35	"script=boot.scr\0" \
	36	"image=zImage\0" \
	37	"console=ttymxc0\0" \
	38	"fdt_high=0xffffffff\0" \
	39	"initrd_high=0xffffffff\0" \
	40	"fdt_file=imx7d-warp.dtb\0" \
	41	"fdt_addr=0x83000000\0" \
	42	"boot_fdt=try\0" \
	43	"ip_dyn=yes\0" \
	44	"mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
	45	"mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
	46	"mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \
	47	"mmcargs=setenv bootargs console=${console},${baudrate} " \
	48	"root=${mmcroot}\0" \
	49	"loadbootscript=" \
	50	"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
	51	"bootscript=echo Running bootscript from mmc ...; " \
	52	"source\0" \
	53	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
	54	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
	55	"mmcboot=echo Booting from mmc ...; " \
	56	"run mmcargs; " \
	57	"if test ${boot_fdt} = yes \|\| test ${boot_fdt} = try; then " \
	58	"if run loadfdt; then " \
	59	"bootz ${loadaddr} - ${fdt_addr}; " \
	60	"else " \
	61	"if test ${boot_fdt} = try; then " \
	62	"bootz; " \
	63	"else " \
	64	"echo WARN: Cannot load the DT; " \
	65	"fi; " \
	66	"fi; " \
	67	"else " \
	68	"bootz; " \
	69	"fi;\0" \
	70
	71	#define CONFIG_BOOTCOMMAND \
	72	"mmc dev ${mmcdev};" \
	73	"mmc dev ${mmcdev}; if mmc rescan; then " \
	74	"if run loadbootscript; then " \
	75	"run bootscript; " \
	76	"else " \
	77	"if run loadimage; then " \
	78	"run mmcboot; " \
	79	"fi; " \
	80	"fi; " \
	81	"fi"
	82
47173483 FE	83	#define CONFIG_SYS_MEMTEST_START 0x80000000
	84	#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x20000000)
	85
	86	#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
	87	#define CONFIG_SYS_HZ 1000
	88
	89	#define CONFIG_STACKSIZE SZ_128K
	90
	91	/* Physical Memory Map */
	92	#define CONFIG_NR_DRAM_BANKS 1
	93	#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
	94
	95	#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
	96	#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
	97	#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
	98
	99	#define CONFIG_SYS_INIT_SP_OFFSET \
	100	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
	101	#define CONFIG_SYS_INIT_SP_ADDR \
	102	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
	103
	104	/* FLASH and environment organization */
	105	#define CONFIG_SYS_NO_FLASH
	106	#define CONFIG_ENV_SIZE SZ_8K
	107	#define CONFIG_ENV_IS_IN_MMC
	108
	109	#define CONFIG_ENV_OFFSET (8 * SZ_64K)
	110	#define CONFIG_SYS_FSL_USDHC_NUM 1
	111
	112	#define CONFIG_SYS_MMC_ENV_DEV 0
	113	#define CONFIG_SYS_MMC_ENV_PART 0
	114	#define CONFIG_MMCROOT "/dev/mmcblk2p2"
	115
	116	/* USB Configs */
47173483 FE	117	#define CONFIG_USB_EHCI
	118	#define CONFIG_USB_EHCI_MX7
	119	#define CONFIG_USB_STORAGE
	120	#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
	121
	122	#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI \| PORT_PTS_PTW)
	123	#define CONFIG_MXC_USB_FLAGS 0
	124	#define CONFIG_USB_MAX_CONTROLLER_COUNT 1 /* Only OTG1 port enabled */
	125
	126	#define CONFIG_IMX_THERMAL
	127
	128	#define CONFIG_CI_UDC
	129	#define CONFIG_USBD_HS
	130	#define CONFIG_USB_GADGET_DUALSPEED
	131
	132	#define CONFIG_USB_GADGET
47173483 FE	133	#define CONFIG_USB_FUNCTION_MASS_STORAGE
	134	#define CONFIG_USB_GADGET_DOWNLOAD
	135	#define CONFIG_USB_GADGET_VBUS_DRAW 2
	136
	137	#define CONFIG_G_DNL_VENDOR_NUM 0x0525
	138	#define CONFIG_G_DNL_PRODUCT_NUM 0xa4a5
	139	#define CONFIG_G_DNL_MANUFACTURER "FSL"
	140
	141	/* USB Device Firmware Update support */
47173483 FE	142	#define CONFIG_USB_FUNCTION_DFU
	143	#define CONFIG_DFU_MMC
	144	#define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_16M
	145	#define DFU_DEFAULT_POLL_TIMEOUT 300
	146
	147	#endif