[people/ms/u-boot.git] / include / configs / wireless_space.h

/*
 * Copyright (C) 2011 Albert ARIBAUD <albert.u.boot@aribaud.net>
 *
 * Based on the netspace_v2 code which is
 * Copyright (C) 2011 Simon Guinot <sguinot@lacie.com>
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef _CONFIG_WIRELESS_SPACE_H
#define _CONFIG_WIRELESS_SPACE_H

/*
 * Machine number definition
 */
#define MACH_TYPE_WIRELESS_SPACE	2500 /* is missing in mach-types.h */
#define CONFIG_MACH_TYPE		MACH_TYPE_WIRELESS_SPACE
#define CONFIG_IDENT_STRING		" Wireless Space"

/*
 * High Level Configuration Options (easy to change)
 */
#define CONFIG_FEROCEON_88FR131		/* CPU Core subversion */
/* SoC name */
#define CONFIG_KW88F6281
#define CONFIG_SKIP_LOWLEVEL_INIT	/* disable board lowlevel_init */

/*
 * Commands configuration
 */
#define CONFIG_SYS_NO_FLASH		/* no NOR or SPI flash */
#include <config_cmd_default.h>
#define CONFIG_CMD_ENV
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_PING
#define CONFIG_CMD_NAND
#define CONFIG_CMD_I2C
#define CONFIG_CMD_IDE
#define CONFIG_CMD_USB

/*
 * Core clock definition
 */
#define CONFIG_SYS_TCLK			166000000 /* 166MHz */

/*
 * SDRAM configuration
 */
#define CONFIG_NR_DRAM_BANKS		1

/*
 * Different SDRAM configuration and size for some of the boards derived
 * from the Network Space v2
 */

/*
 * mv-common.h should be defined after CMD configs since it used them
 * to enable certain macros
 */
#include "mv-common.h"

/* Remove or override few declarations from mv-common.h */
#undef CONFIG_RBTREE
#undef CONFIG_SYS_IDE_MAXBUS
#undef CONFIG_SYS_IDE_MAXDEVICE
#define CONFIG_SYS_IDE_MAXBUS           1
#define CONFIG_SYS_IDE_MAXDEVICE        1
#undef CONFIG_SYS_PROMPT
#define CONFIG_SYS_PROMPT		"ws> "

/*
 * Ethernet Driver configuration
 */
#ifdef CONFIG_CMD_NET
#define CONFIG_MISC_INIT_R /* misc_init_r() initializes MAC address */
#define CONFIG_MVGBE_PORTS	{1, 0}	/* enable only egiga0... */
#define PORT_SERIAL_CONTROL_VALUE 0x00A4260E /* ... tied to the switch... */
#define CONFIG_PHY_BASE_ADR 0xa		/* ... through a 'fake' PHY */
#define CONFIG_MII
#undef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
#define CONFIG_NETCONSOLE
#define CONFIG_MV88E61XX_SWITCH
#define CONFIG_MV88E61XX_MULTICHIP_ADRMODE
#define CONFIG_MV88E61XX_CMD
#define CONFIG_CMD_TFTPPUT
#endif /* CONFIG_CMD_NET */

/*
 * SATA Driver configuration
 */
#ifdef CONFIG_MVSATA_IDE
#define CONFIG_SYS_ATA_IDE0_OFFSET      MV_SATA_PORT0_OFFSET
#endif /* CONFIG_MVSATA_IDE */

/*
 * Enable GPI0 support
 */
#define CONFIG_KIRKWOOD_GPIO

/*
 * Enable I2C support
 */
#ifdef CONFIG_CMD_I2C
/* I2C EEPROM HT24LC04 (512B - 32 pages of 16 Bytes) */
#define CONFIG_CMD_EEPROM
#define CONFIG_SYS_I2C_EEPROM_ADDR		0x50
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	4 /* 16-byte page size */
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1 /* 8-bit device address */
#endif /* CONFIG_CMD_I2C */

/*
 * Partition support
 */
#define CONFIG_DOS_PARTITION
#define CONFIG_EFI_PARTITION

/*
 * File systems support
 */
#define CONFIG_CMD_EXT2
#define CONFIG_CMD_FAT

/*
 * Use the HUSH parser
 */
#define CONFIG_SYS_HUSH_PARSER

/*
 * Console configuration
 */
#define CONFIG_CONSOLE_MUX
#define CONFIG_SYS_CONSOLE_IS_IN_ENV

/*
 * Enable device tree support
 */
#define CONFIG_OF_LIBFDT

/*
 * Environment variables configurations
 */

#define CONFIG_ENV_IS_IN_NAND
#define CONFIG_ENV_SECT_SIZE		0x20000	/* 128KB */
#define CONFIG_ENV_SIZE			0x20000	/* 128KB */
#define CONFIG_ENV_OFFSET		0x80000	/* env starts here */

/*
 * Board-specific command to make using buttons etc easier
 */

#define CONFIG_WIRELESS_SPACE_CMD

/*
 * Default environment variables
 */
#define CONFIG_PREBOOT

#define CONFIG_BOOTARGS "console=ttyS0,115200"

#define CONFIG_BOOTCOMMAND					\
	"if run usbload || run diskload; then bootm; fi"

#define CONFIG_EXTRA_ENV_SETTINGS				\
	"stdin=serial\0"					\
	"stdout=serial\0"					\
	"stderr=serial\0"					\
	"bootfile=uImage\0"					\
	"loadaddr=0x800000\0"					\
	"autoload=no\0"						\
	"netconsole="						\
		"set stdin $stdin,nc; "				\
		"set stdout $stdout,nc; "			\
		"set stderr $stderr,nc;\0"			\
	"diskload=ide reset && "				\
		"ext2load ide 0:1 $loadaddr /boot/$bootfile\0"	\
	"usbload=usb start && "					\
		"fatload usb 0:1 $loadaddr /boot/$bootfile\0"	\
	"preboot="						\
		"dhcp && run netconsole\0"

#endif /* _CONFIG_WIRELESS_SPACE_H */
Commit	Line	Data
7202e8ae AA	1	/*
	2	* Copyright (C) 2011 Albert ARIBAUD <albert.u.boot@aribaud.net>
	3	*
	4	* Based on the netspace_v2 code which is
	5	* Copyright (C) 2011 Simon Guinot <sguinot@lacie.com>
	6	*
1a459660	7	* SPDX-License-Identifier: GPL-2.0+
7202e8ae AA	8	*/
	9
	10	#ifndef _CONFIG_WIRELESS_SPACE_H
	11	#define _CONFIG_WIRELESS_SPACE_H
	12
	13	/*
	14	* Machine number definition
	15	*/
	16	#define MACH_TYPE_WIRELESS_SPACE 2500 /* is missing in mach-types.h */
	17	#define CONFIG_MACH_TYPE MACH_TYPE_WIRELESS_SPACE
	18	#define CONFIG_IDENT_STRING " Wireless Space"
	19
	20	/*
	21	* High Level Configuration Options (easy to change)
	22	*/
	23	#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */
7202e8ae AA	24	/* SoC name */
	25	#define CONFIG_KW88F6281
	26	#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
	27
	28	/*
	29	* Commands configuration
	30	*/
	31	#define CONFIG_SYS_NO_FLASH /* no NOR or SPI flash */
	32	#include <config_cmd_default.h>
	33	#define CONFIG_CMD_ENV
	34	#define CONFIG_CMD_DHCP
	35	#define CONFIG_CMD_PING
	36	#define CONFIG_CMD_NAND
	37	#define CONFIG_CMD_I2C
	38	#define CONFIG_CMD_IDE
	39	#define CONFIG_CMD_USB
	40
	41	/*
	42	* Core clock definition
	43	*/
	44	#define CONFIG_SYS_TCLK 166000000 /* 166MHz */
	45
	46	/*
	47	* SDRAM configuration
	48	*/
	49	#define CONFIG_NR_DRAM_BANKS 1
	50
	51	/*
	52	* Different SDRAM configuration and size for some of the boards derived
	53	* from the Network Space v2
	54	*/
	55
	56	/*
	57	* mv-common.h should be defined after CMD configs since it used them
	58	* to enable certain macros
	59	*/
	60	#include "mv-common.h"
	61
	62	/* Remove or override few declarations from mv-common.h */
	63	#undef CONFIG_RBTREE
	64	#undef CONFIG_SYS_IDE_MAXBUS
	65	#undef CONFIG_SYS_IDE_MAXDEVICE
	66	#define CONFIG_SYS_IDE_MAXBUS 1
	67	#define CONFIG_SYS_IDE_MAXDEVICE 1
	68	#undef CONFIG_SYS_PROMPT
	69	#define CONFIG_SYS_PROMPT "ws> "
	70
	71	/*
	72	* Ethernet Driver configuration
	73	*/
	74	#ifdef CONFIG_CMD_NET
	75	#define CONFIG_MISC_INIT_R /* misc_init_r() initializes MAC address */
	76	#define CONFIG_MVGBE_PORTS {1, 0} /* enable only egiga0... */
	77	#define PORT_SERIAL_CONTROL_VALUE 0x00A4260E /* ... tied to the switch... */
	78	#define CONFIG_PHY_BASE_ADR 0xa /* ... through a 'fake' PHY */
	79	#define CONFIG_MII
	80	#undef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
	81	#define CONFIG_NETCONSOLE
	82	#define CONFIG_MV88E61XX_SWITCH
	83	#define CONFIG_MV88E61XX_MULTICHIP_ADRMODE
	84	#define CONFIG_MV88E61XX_CMD
	85	#define CONFIG_CMD_TFTPPUT
	86	#endif /* CONFIG_CMD_NET */
	87
88	/*
89	* SATA Driver configuration
90	*/
91	#ifdef CONFIG_MVSATA_IDE
92	#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
93	#endif /* CONFIG_MVSATA_IDE */
94
95	/*
96	* Enable GPI0 support
97	*/
98	#define CONFIG_KIRKWOOD_GPIO
99
100	/*
101	* Enable I2C support
102	*/
103	#ifdef CONFIG_CMD_I2C
104	/* I2C EEPROM HT24LC04 (512B - 32 pages of 16 Bytes) */
105	#define CONFIG_CMD_EEPROM
106	#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
107	#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 /* 16-byte page size */
108	#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* 8-bit device address */
109	#endif /* CONFIG_CMD_I2C */
110
111	/*
112	* Partition support
113	*/
114	#define CONFIG_DOS_PARTITION
115	#define CONFIG_EFI_PARTITION
116
117	/*
118	* File systems support
119	*/
120	#define CONFIG_CMD_EXT2
121	#define CONFIG_CMD_FAT
122
123	/*
124	* Use the HUSH parser
125	*/
126	#define CONFIG_SYS_HUSH_PARSER
127
128	/*
129	* Console configuration
130	*/
131	#define CONFIG_CONSOLE_MUX
132	#define CONFIG_SYS_CONSOLE_IS_IN_ENV
133
134	/*
135	* Enable device tree support
136	*/
137	#define CONFIG_OF_LIBFDT
138
139	/*
140	* Environment variables configurations
141	*/
142
143	#define CONFIG_ENV_IS_IN_NAND
144	#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128KB */
145	#define CONFIG_ENV_SIZE 0x20000 /* 128KB */
146	#define CONFIG_ENV_OFFSET 0x80000 /* env starts here */
147
148	/*
149	* Board-specific command to make using buttons etc easier
150	*/
151
152	#define CONFIG_WIRELESS_SPACE_CMD
153
154	/*
155	* Default environment variables
156	*/
157	#define CONFIG_PREBOOT
158
159	#define CONFIG_BOOTARGS "console=ttyS0,115200"
160
161	#define CONFIG_BOOTCOMMAND \
162	"if run usbload \|\| run diskload; then bootm; fi"
163
164	#define CONFIG_EXTRA_ENV_SETTINGS \
165	"stdin=serial\0" \
166	"stdout=serial\0" \
167	"stderr=serial\0" \
168	"bootfile=uImage\0" \
169	"loadaddr=0x800000\0" \
170	"autoload=no\0" \
171	"netconsole=" \
172	"set stdin $stdin,nc; " \
173	"set stdout $stdout,nc; " \
174	"set stderr $stderr,nc;\0" \
175	"diskload=ide reset && " \
176	"ext2load ide 0:1 $loadaddr /boot/$bootfile\0" \
177	"usbload=usb start && " \
178	"fatload usb 0:1 $loadaddr /boot/$bootfile\0" \
179	"preboot=" \
180	"dhcp && run netconsole\0"
181
182	#endif /* _CONFIG_WIRELESS_SPACE_H */