[people/ms/u-boot.git] / include / configs / wireless_space.h

/*
 * Copyright (C) 2011 Albert ARIBAUD <albert.u.boot@aribaud.net>
 *
 * Based on the netspace_v2 code which is
 * Copyright (C) 2011 Simon Guinot <sguinot@lacie.com>
 *
 * SPDX-License-Identifier:	GPL-2.0+
 */

#ifndef _CONFIG_WIRELESS_SPACE_H
#define _CONFIG_WIRELESS_SPACE_H

/*
 * Machine number definition
 */
#define MACH_TYPE_WIRELESS_SPACE	2500 /* is missing in mach-types.h */
#define CONFIG_MACH_TYPE		MACH_TYPE_WIRELESS_SPACE
#define CONFIG_IDENT_STRING		" Wireless Space"

/*
 * High Level Configuration Options (easy to change)
 */
#define CONFIG_FEROCEON_88FR131		/* CPU Core subversion */
#define CONFIG_KIRKWOOD			/* SoC Family Name */
/* SoC name */
#define CONFIG_KW88F6281
#define CONFIG_SKIP_LOWLEVEL_INIT	/* disable board lowlevel_init */

/*
 * Commands configuration
 */
#define CONFIG_SYS_NO_FLASH		/* no NOR or SPI flash */
#include <config_cmd_default.h>
#define CONFIG_CMD_ENV
#define CONFIG_CMD_DHCP
#define CONFIG_CMD_PING
#define CONFIG_CMD_NAND
#define CONFIG_CMD_I2C
#define CONFIG_CMD_IDE
#define CONFIG_CMD_USB

/*
 * Core clock definition
 */
#define CONFIG_SYS_TCLK			166000000 /* 166MHz */

/*
 * SDRAM configuration
 */
#define CONFIG_NR_DRAM_BANKS		1

/*
 * Different SDRAM configuration and size for some of the boards derived
 * from the Network Space v2
 */

/*
 * mv-common.h should be defined after CMD configs since it used them
 * to enable certain macros
 */
#include "mv-common.h"

/* Remove or override few declarations from mv-common.h */
#undef CONFIG_RBTREE
#undef CONFIG_SYS_IDE_MAXBUS
#undef CONFIG_SYS_IDE_MAXDEVICE
#define CONFIG_SYS_IDE_MAXBUS           1
#define CONFIG_SYS_IDE_MAXDEVICE        1
#undef CONFIG_SYS_PROMPT
#define CONFIG_SYS_PROMPT		"ws> "

/*
 * Ethernet Driver configuration
 */
#ifdef CONFIG_CMD_NET
#define CONFIG_MISC_INIT_R /* misc_init_r() initializes MAC address */
#define CONFIG_MVGBE_PORTS	{1, 0}	/* enable only egiga0... */
#define PORT_SERIAL_CONTROL_VALUE 0x00A4260E /* ... tied to the switch... */
#define CONFIG_PHY_BASE_ADR 0xa		/* ... through a 'fake' PHY */
#define CONFIG_MII
#undef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
#define CONFIG_NETCONSOLE
#define CONFIG_MV88E61XX_SWITCH
#define CONFIG_MV88E61XX_MULTICHIP_ADRMODE
#define CONFIG_MV88E61XX_CMD
#define CONFIG_CMD_TFTPPUT
#endif /* CONFIG_CMD_NET */

/*
 * SATA Driver configuration
 */
#ifdef CONFIG_MVSATA_IDE
#define CONFIG_SYS_ATA_IDE0_OFFSET      MV_SATA_PORT0_OFFSET
#endif /* CONFIG_MVSATA_IDE */

/*
 * Enable GPI0 support
 */
#define CONFIG_KIRKWOOD_GPIO

/*
 * Enable I2C support
 */
#ifdef CONFIG_CMD_I2C
/* I2C EEPROM HT24LC04 (512B - 32 pages of 16 Bytes) */
#define CONFIG_CMD_EEPROM
#define CONFIG_SYS_I2C_EEPROM_ADDR		0x50
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	4 /* 16-byte page size */
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		1 /* 8-bit device address */
#endif /* CONFIG_CMD_I2C */

/*
 * Partition support
 */
#define CONFIG_DOS_PARTITION
#define CONFIG_EFI_PARTITION

/*
 * File systems support
 */
#define CONFIG_CMD_EXT2
#define CONFIG_CMD_FAT

/*
 * Use the HUSH parser
 */
#define CONFIG_SYS_HUSH_PARSER

/*
 * Console configuration
 */
#define CONFIG_CONSOLE_MUX
#define CONFIG_SYS_CONSOLE_IS_IN_ENV

/*
 * Enable device tree support
 */
#define CONFIG_OF_LIBFDT

/*
 * Environment variables configurations
 */

#define CONFIG_ENV_IS_IN_NAND
#define CONFIG_ENV_SECT_SIZE		0x20000	/* 128KB */
#define CONFIG_ENV_SIZE			0x20000	/* 128KB */
#define CONFIG_ENV_OFFSET		0x80000	/* env starts here */

/*
 * Board-specific command to make using buttons etc easier
 */

#define CONFIG_WIRELESS_SPACE_CMD

/*
 * Default environment variables
 */
#define CONFIG_PREBOOT

#define CONFIG_BOOTARGS "console=ttyS0,115200"

#define CONFIG_BOOTCOMMAND					\
	"if run usbload || run diskload; then bootm; fi"

#define CONFIG_EXTRA_ENV_SETTINGS				\
	"stdin=serial\0"					\
	"stdout=serial\0"					\
	"stderr=serial\0"					\
	"bootfile=uImage\0"					\
	"loadaddr=0x800000\0"					\
	"autoload=no\0"						\
	"netconsole="						\
		"set stdin $stdin,nc; "				\
		"set stdout $stdout,nc; "			\
		"set stderr $stderr,nc;\0"			\
	"diskload=ide reset && "				\
		"ext2load ide 0:1 $loadaddr /boot/$bootfile\0"	\
	"usbload=usb start && "					\
		"fatload usb 0:1 $loadaddr /boot/$bootfile\0"	\
	"preboot="						\
		"dhcp && run netconsole\0"

#endif /* _CONFIG_WIRELESS_SPACE_H */
Commit	Line	Data
7202e8ae AA	1	/*
	2	* Copyright (C) 2011 Albert ARIBAUD <albert.u.boot@aribaud.net>
	3	*
	4	* Based on the netspace_v2 code which is
	5	* Copyright (C) 2011 Simon Guinot <sguinot@lacie.com>
	6	*
1a459660	7	* SPDX-License-Identifier: GPL-2.0+
7202e8ae AA	8	*/
	9
	10	#ifndef _CONFIG_WIRELESS_SPACE_H
	11	#define _CONFIG_WIRELESS_SPACE_H
	12
	13	/*
	14	* Machine number definition
	15	*/
	16	#define MACH_TYPE_WIRELESS_SPACE 2500 /* is missing in mach-types.h */
	17	#define CONFIG_MACH_TYPE MACH_TYPE_WIRELESS_SPACE
	18	#define CONFIG_IDENT_STRING " Wireless Space"
	19
	20	/*
	21	* High Level Configuration Options (easy to change)
	22	*/
	23	#define CONFIG_FEROCEON_88FR131 /* CPU Core subversion */
	24	#define CONFIG_KIRKWOOD /* SoC Family Name */
	25	/* SoC name */
	26	#define CONFIG_KW88F6281
	27	#define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */
	28
	29	/*
	30	* Commands configuration
	31	*/
	32	#define CONFIG_SYS_NO_FLASH /* no NOR or SPI flash */
	33	#include <config_cmd_default.h>
	34	#define CONFIG_CMD_ENV
	35	#define CONFIG_CMD_DHCP
	36	#define CONFIG_CMD_PING
	37	#define CONFIG_CMD_NAND
	38	#define CONFIG_CMD_I2C
	39	#define CONFIG_CMD_IDE
	40	#define CONFIG_CMD_USB
	41
	42	/*
	43	* Core clock definition
	44	*/
	45	#define CONFIG_SYS_TCLK 166000000 /* 166MHz */
	46
	47	/*
	48	* SDRAM configuration
	49	*/
	50	#define CONFIG_NR_DRAM_BANKS 1
	51
	52	/*
	53	* Different SDRAM configuration and size for some of the boards derived
	54	* from the Network Space v2
	55	*/
	56
	57	/*
	58	* mv-common.h should be defined after CMD configs since it used them
	59	* to enable certain macros
	60	*/
	61	#include "mv-common.h"
	62
	63	/* Remove or override few declarations from mv-common.h */
	64	#undef CONFIG_RBTREE
	65	#undef CONFIG_SYS_IDE_MAXBUS
	66	#undef CONFIG_SYS_IDE_MAXDEVICE
	67	#define CONFIG_SYS_IDE_MAXBUS 1
	68	#define CONFIG_SYS_IDE_MAXDEVICE 1
	69	#undef CONFIG_SYS_PROMPT
	70	#define CONFIG_SYS_PROMPT "ws> "
	71
72	/*
73	* Ethernet Driver configuration
74	*/
75	#ifdef CONFIG_CMD_NET
76	#define CONFIG_MISC_INIT_R /* misc_init_r() initializes MAC address */
77	#define CONFIG_MVGBE_PORTS {1, 0} /* enable only egiga0... */
78	#define PORT_SERIAL_CONTROL_VALUE 0x00A4260E /* ... tied to the switch... */
79	#define CONFIG_PHY_BASE_ADR 0xa /* ... through a 'fake' PHY */
80	#define CONFIG_MII
81	#undef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
82	#define CONFIG_NETCONSOLE
83	#define CONFIG_MV88E61XX_SWITCH
84	#define CONFIG_MV88E61XX_MULTICHIP_ADRMODE
85	#define CONFIG_MV88E61XX_CMD
86	#define CONFIG_CMD_TFTPPUT
87	#endif /* CONFIG_CMD_NET */
88
89	/*
90	* SATA Driver configuration
91	*/
92	#ifdef CONFIG_MVSATA_IDE
93	#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET
94	#endif /* CONFIG_MVSATA_IDE */
95
96	/*
97	* Enable GPI0 support
98	*/
99	#define CONFIG_KIRKWOOD_GPIO
100
101	/*
102	* Enable I2C support
103	*/
104	#ifdef CONFIG_CMD_I2C
105	/* I2C EEPROM HT24LC04 (512B - 32 pages of 16 Bytes) */
106	#define CONFIG_CMD_EEPROM
107	#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
108	#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 /* 16-byte page size */
109	#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 /* 8-bit device address */
110	#endif /* CONFIG_CMD_I2C */
111
112	/*
113	* Partition support
114	*/
115	#define CONFIG_DOS_PARTITION
116	#define CONFIG_EFI_PARTITION
117
118	/*
119	* File systems support
120	*/
121	#define CONFIG_CMD_EXT2
122	#define CONFIG_CMD_FAT
123
124	/*
125	* Use the HUSH parser
126	*/
127	#define CONFIG_SYS_HUSH_PARSER
128
129	/*
130	* Console configuration
131	*/
132	#define CONFIG_CONSOLE_MUX
133	#define CONFIG_SYS_CONSOLE_IS_IN_ENV
134
135	/*
136	* Enable device tree support
137	*/
138	#define CONFIG_OF_LIBFDT
139
140	/*
141	* Environment variables configurations
142	*/
143
144	#define CONFIG_ENV_IS_IN_NAND
145	#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128KB */
146	#define CONFIG_ENV_SIZE 0x20000 /* 128KB */
147	#define CONFIG_ENV_OFFSET 0x80000 /* env starts here */
148
149	/*
150	* Board-specific command to make using buttons etc easier
151	*/
152
153	#define CONFIG_WIRELESS_SPACE_CMD
154
155	/*
156	* Default environment variables
157	*/
158	#define CONFIG_PREBOOT
159
160	#define CONFIG_BOOTARGS "console=ttyS0,115200"
161
162	#define CONFIG_BOOTCOMMAND \
163	"if run usbload \|\| run diskload; then bootm; fi"
164
165	#define CONFIG_EXTRA_ENV_SETTINGS \
166	"stdin=serial\0" \
167	"stdout=serial\0" \
168	"stderr=serial\0" \
169	"bootfile=uImage\0" \
170	"loadaddr=0x800000\0" \
171	"autoload=no\0" \
172	"netconsole=" \
173	"set stdin $stdin,nc; " \
174	"set stdout $stdout,nc; " \
175	"set stderr $stderr,nc;\0" \
176	"diskload=ide reset && " \
177	"ext2load ide 0:1 $loadaddr /boot/$bootfile\0" \
178	"usbload=usb start && " \
179	"fatload usb 0:1 $loadaddr /boot/$bootfile\0" \
180	"preboot=" \
181	"dhcp && run netconsole\0"
182
183	#endif /* _CONFIG_WIRELESS_SPACE_H */